We use Thdbrd email , each mail use Coy's logo, its to heavy, pls advis to set automatic delete of logo, than only last email use logo, the other deleted.
Dear Sirs,
We use Thunderbird email, each email attached with coy's logo ( .jpg), during email discussion each logo will carry forwards on every email received, therefore the file become big (many logos attached).
Pls advise whether any setting to minimize the attached logo, let say only last 2 sender's logo appeared the other automatically deleted (logo can be more than 10 logos subject to the participants), which slow down the email due to heavy attachment.
Thanks you for assistance.
Anto
Maybe it will be tidier if you go to
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|<select account>|'''Composition & Addressing
and clear the checkboxes ''Include signature for replies'' and ''Include signature for forwards''.
That will stop adding new copies of the signature. I don't know of any tools to automatically edit out previous signatures or images; in theory this can work in newsgroups where the "-- " separator is used, but I've never seen this sort of tidying up in email. (And this only works properly when ''all ''contributors to the conversation use bottom-posting.)
In the general case, it would be quite hard to automatically identify and locate exactly which content should be removed, since most signatures are a blend of text, URLs and images. In a special case where the signature is an image file (is a jpeg really a good choice for this?) then it might appear to be quite easy.
Those of us who advocate and prefer bottom-posting or interleaved posting would argue that it's ''your ''responsibility to trim the older material to suit, anyway. ;-)
Similar Messages
-
when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?
I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.
Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you. -
After an automatic update recently, I can only print email (Outlook Express 6) headers but the messages do not print. I now have Firefox 3.6.22.
Thanks John for the suggestion. I was finally able to dwonload the newest drivers today when I signed on. Seems like if you let one day go by Software Update will look at your version of the driver and will finally let you download the newest. That did not help. Nothing but communication errors. It would not even let me load the the new driver as it would no longer ever see the printer.
Yesterday, for further explanation, I was working at the computer when I heard the printer chime a few times. When I looked over the green light, which normally signals it is receiving a file to print, was flashing away. I was doing nothing and I finally had to turn it off. I spoke with another techie friend who is a big Mac user and has the same printer and he suggested it may be the USB circuit. This printer has been on for 5 years with a few days off. We have concluded the circuits are past their useful life and I will soon send the printer to be recycled somewhere. A new printer is on the way as I need this device.
Again, thank you for your suggestion and I will mark this solved due to mechanical failure. -
Mail: how to download ONLY last emails and not the whole hotmail.
Hi!
Quick question: like what Mail does in iPhones/iPads, how can I configure Mail in my iMac or Macbook Pro so that it only downloads the last, say 50 emails and not the 4000 aprox. emails I have inside the hotmail (now outlook) server?
I have been wanting to use mail for a long time but I can't seem to find that option. I only want to see the LAST EMAILS like what happens in the app on my iPhone.
Thanks.unless there is a special setting in yahoo webmail interface that allows this (gmail pop has it for example), there is no way to do it. POP will download all available messages on the first download. that's how POP works. from there on it will only download new ones.
-
I've tried to go into manage my account it only has my current e-mail address and I can't click forgot password for the old apple id because that e-mail is no longer active.
I hope that makes sense..Do a backup.
Try System Preferences/iCloud and sign out. Then sign in with your new Apple ID. -
I'm setting up my devices with the find my phone app. I have accomplished setting up 2 devices. The third I can't setup because I can't change the iCloud account.
My understanding from reading that the iCloud accounts must use the same name on all devices. How do I change that account in my phone settings?You don't have to use the same iCloud account in order to track all your devices. You just have to sign into the iCloud account being used on the device you are trying to track in order to track it. When you sign in on icloud.com and open Find My iPhone, you will see all the devices with Find My iPhone enabled that are using the account you signed in with. To track a device using a different account, simply sign out, then sign back in using the ID the new device is using.
The Find My iPhone app works the same way. It will display devices based on the iCloud account you sign in with on the app. To track a device using a different account, sign out, then sign back in with the iCloud ID that the new device is using. -
Delete From More than 1 table without using execute immediate
Hi,
Am new to PL/SQL, I had been asked to delete few of the table for my ETL jobs in Oracle 10G R2. I have to delete(truncate) few tables and the table names are in another table with a flag to delete it or not. So, when ever I run the job it should check for the flag and for those flag which is 'Y' then for all those tables should be deleted without using the Execute Immediate, because I dont have privilages to use "Execute Immediate" statement.
Can anyone help me in how to do this.
Regards
SenthilThen tell you DBA's, or better yet their boss, that they need some additional training in how Oracle actually works.
Yes, dynamic sql can be a bad thing when it is used to generate hundreds of identical queries that differ ony in the literals used in predicates, but for something like a set of delte table statements or truncate table statements, dynamic sql is no different in terms of the effect on the shared pool that hard coding the sql statements.
This is a bad use of dynamic sql, because it generates a lot of nearly identical statements due to the lack of bind variables. It is the type of thing your DBA's should, correctly, bring out the lead pipe for.
DECLARE
l_sql VARCHAR2(4000);
BEGIN
FOR r in (SELECT account_no FROM accounts_to_delete) LOOP
l_sql := 'DELETE FROM accounts WHERE account_no = '||r.account_no;
EXECUTE IMMEDIATE l_sql;
END LOOP;
END;This will result in one sql statement in the shared pool for every row in accounts_to_delete. Although there is much else wrong with this example, from the bind variable perspective it should be re-written to use bind variables like:
DECLARE
l_sql VARCHAR2(4000);
l_acct NUMBER;
BEGIN
FOR r in (SELECT account_no FROM accounts_to_delete) LOOP
l_sql := 'DELETE FROM accounts WHERE account_no = :b1';
EXECUTE IMMEDIATE l_sql USING l_acct;
END LOOP;
END;However, since you cannot bind object names into sql statements, the difference in terms of the number of statements that end up in the shared pool between this:
DECLARE
l_sql VARCHAR2(4000);
BEGIN
FOR r in (SELECT table_name, delete_tab, trunc_tab
FROM tables_to_delete) LOOP
IF r.delete_tab = 'Y' THEN
l_sql := 'DELETE FROM '||r.table_name;
ELSIF r.trunc_tab = 'Y' THEN
l_sql := 'TRUNCATE TABLE '||r.table_name;
ELSE
l_sql := NULL;
END IF;
EXECUTE IMMEDIATE l_sql;
END LOOP;
END;and something like this:
BEGIN
DELETE FROM tab1;
DELETE FROM tab2;
EXECUTE IMMEDIATE 'TRUNCTE TABLE tab3';
END;or this as a sql script
DELETE FROM tab1;
DELETE FROM tab2;
TRUNCTE TABLE tab3;is absolutley nothing.
Note that if you are truncating some of the tables, and wnat/need to use a stored procedure, you are going to have to use dynamic sql for the truncates anyway since trncate is ddl, and you cannot do ddl in pl/sql wiothout using dynamic sql.
John -
I have created several bookmark folders and everything has worked fine until recently. Suddenly 2 folders do not open anymore when you hover the mouse over the folder.
If I have the bookmarks in the sidebar everything works fine.-> click '''Firefox''' button and click '''Exit'''
Start Firefox in Safe Mode by Holding down the '''Option''' key while starting your Mozilla application.
As an alternate method, go to Utilities (in the Applications folder) and open Terminal, then run:
/Applications/Firefox.app/Contents/MacOS/firefox-bin -safe-mode
-> Firefox Safe Mode window will appear. DON'T SELECT ANY OPTIONS, just click '''Continue in Safe Mode'''
Firefox will open up with just basic Firefox. Check and tell if its working while you are in Safe Mode. -
After an automatic update yesterday, I started having problems printing emails from Outlook Express 6. The headers (e.g. To, From, Subject) print, but the messages do not print.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods -
I USED REBUILD ON ONE OF MY EMAIL ACCOUNTS AND NOW ONLY HAVE SIX EMAILS SHOWING UP OUT OF OVER 300 THAT WAS THERE.
IS THERE A WAY TO RETRIEVE THEM?
I HAVE A POP EMAIL ACCOUNT RUNNING TIGER 10.4.7.
THANK YOU FOR ANY HELP.
POWER MAC QUICKSILVER Mac OS X (10.4.7)Larry,
Unfortunately, this can get a bit tedious, and detailed, but it is very likely all the messages are still there, it is merely an indexing problem. However, issues following conversion from an earlier version of Mail, can complicate working to get Mail to reindex.
Since you have converted from an earlier version of Mail, you probably have issues arising out of leftover files, and conversion to Tiger and Mail 2.x. Also, the mbox file is not used in Mail 2.x, and any found is a leftover file.
I want you to read the article at the link below, and then perhaps get back to me with some observations, before attempting any changes:
http://docs.info.apple.com/article.html?artnum=301315
This issue of leftover files applies not only to mailboxes you have previously created (which are in the Mailboxes folder the article mentioned) but will also apply to those mailboxes in account folders created prior to the upgrade to Tiger.
In a pre-conversion to Tiger mailbox, the only file that really mattered, in regard to message content, was the file "mbox". In a mailbox properly created and established in Tiger, the only thing that really matters is the folder named Messages.
Thus, if you are able to compare the size of both the mbox file and the Messages folder, at the time of conversion (a mailbox trying to have it both ways), and they are approximately the same size, then you can reasonably conclude everything was converted. There are some very minor exceptions to this comparative analysis, but it basically holds.
The path to the Mail folder is Home/Library/Mail -- within the Mail folder are one or more account folders and the Mailboxes folder.
There are numerous topics about issues surrounding conversion of mailboxes to Tiger and Mail 2.x, from earlier versions. One of them -- the lengthy topic at the link below -- may also be of assistance, and deals with the Envelope Index to some extent:
http://discussions.apple.com/thread.jspa?threadID=413196
Let me know any questions, and if needed, post back for specific instructions, and help after you have thoroughly investigated your Mail folder, and mailboxes, and the degree of conversion that may not have been completed. If you think you have all messages displaying, that you expect to (except for the search issue), then simply removing all unneeded files may the route to go.
Once all leftover files are removed, the at the root level of the original Mail folder, locate the Envelope Index file, and delete it -- if more than one file has Envelope in the name, delete those as well.
Relaunch Mail, which will announce that it is ready to import your mailboxes -- allow this to continue, and in your case, it will really only be reindexing all your mailboxes, and not importing any.
This will refresh this all-encompassing index file, and I think the the disappearing messages will be resolved.
Ernie -
I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock -
ICloud does not update emails in Mail on my MacBook Pro unless Mail app is open
Hi, looking for some advice
Up to a few days ago whenever I started up Mail in my MacBook Pro the e-mails I had received on my iPhone/iPad were pushed through and were visible as read.
Only now unless I have the MacBook runnig with the Mail app open they don't come through.
I can force them to synce if I move the emails on my iphone into a different folder, then back to inbox, but only while the Mail app is running.
It's annoying as one thing I like is being able to read the emails on my mobile devices then reply later from the MacBook when I get home.
I did change my iCloud password recently but it is the same across all devices, I removed the iCloud account from mail and system prefs then added them back but no joy.
I'm fairly sure it all started when I updated to iOS7 on the iPhone & iPad but cant be certain as I dont use the MacBook every day,
Any suggestions??
ThanksOK, I persevered and used the Rebuild mailbox option on Mail, actually had to do it twice, but now when I boot up and Mail opens all the previously received iCloud messages I've read on iPhone/iPad are pushed through.
Back to normal... -
How we can lock No more than one user can use the table at a single time
Hi Abapers,
0) which function modules to lock & unlock a table.
1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
2) If there is no lock, then lock the table and go into change mode.
3) On exiting from the program, unlock the table using the function module.
4) more than one user can't modify the table just display.
Note: If there is any lock, display message saying table is locked.
Plz help me for this requirement.
Thanks
NaniHello Nani
Have a look at the lock object EMMARAE (<i>Lock MARA and MARM/MAKT exclusively</i>) in transaction SE11.
Inspect the F1 help for field <b>Lock mode</b>:
DE ENQMODE
Short Text
Lock mode
Definition
Defines how to synchronize table record access by several users.
The following modes exist:
Exclusive lock
The locked data can be read or processed by one user only. A request
for another exclusive lock or for a shared lock is rejected.
Shared lock
Several users can read the same data at the same time, but as soon
as a user edits the data, a second user can no longer access this
data. Requests for further shared locks are accepted, even if they
are issued by different users, but exclusive locks are rejected.
Exclusive but not cumulative lock
Exclusive locks can be requested by the same transaction more than
once and handled successively, but an exclusive but not cumulative
lock can only be requested once by a given transaction. All other
lock requests are rejected.
If you want to lock a standard table search whether the table is used in lock objects (<i>Where-Used-List</i>). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
The lock modules can be found in menu <b>GoTo -> Lock Modules</b>.
Given these lock modules the logic should be quite clear after starting the program:
1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
Regards
Uwe
Maybe you are looking for
-
How to make the stage transparent for SWF file being used in Dreamweaver
I have a SWF file in my Dreamweaver site, that plays correctly. The problem is that the stage is white and we would like it to be transparent. Searching the archives the following advice was given: in your html embedding code you need to set the wmod
-
My mac air is not responding on guest log in
on log in with guest users the system is not responding, even i have to force shut down the system
-
How to Change S012 Table Structure ..?
Hi MM Experts, How to copy and how to create new structure and new caracterstics and MAterial type from table S012 . T-code for execute MCE1 . How to Change S012 Table Structure ..? Regards, Anthyodaya. Edited by: anthyodaya Reddy Nagaram on Jul 7
-
when i want to sync my ipod i get really frequnently an error massage saying: could not copy file to ipod. unkown error 69. so i read the faqs, but it is not the problem that the mp3s are broken or something. when i try again, the problem occours wit
-
Adobe Flash 11.9 won't install on Mavericks
I just upgraded to Mavericks and I can not get Flash to load. In fact, Flash is nowhere to be found on my system. I have tried 10 or 11 times. It will walk through the load/install process, say it is finished and then is nowhere to be found. I am