We want to confirm that the application will be compatible daylight saving

We want to confirm that the application will be compatible during the daylight savings change over on the 1st of April where the time rolls back from 3am to 2am
confirm that we have the compatible patch sets for Australian Eastern Standard Time for daylight savings change over on 1st April 2012
running ebusiness 11.5.10
Edited by: jemar98 on Feb 24, 2012 12:19 PM

jemar98 wrote:
We want to confirm that the application will be compatible during the daylight savings change over on the 1st of April where the time rolls back from 3am to 2am
confirm that we have the compatible patch sets for Australian Eastern Standard Time for daylight savings change over on 1st April 2012
running ebusiness 11.5.10Please see these docs.
Complying with Daylight Saving Time (DST) and Time Zone Rule Changes in E-Business Suite 11i [ID 458452.1]
Diagnosing DST issue with eBusiness Suite 11i and Release 12 [ID 800420.1]
Thanks,
Hussein

Similar Messages

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Every time I download a PDF I get a message that says There was a RAISE without a handler. The application will now close. What does this mean?

I work on a Power Mac G5 running OSX 10.5.8.
We recently had to upgrade Java.
Now every time I download a PDF I get the message "There was a RAISE without a handler. The application will now close."
I downloads the PDF OK, but then Safari closes and I have to start it back up to get to my email.
What is the message telling me? It did not do this before we upgraded Java.

I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It.

I switched my iPod Nano from a PC to my macbook air. The info and iTunes still shows it as a windows device, just want to confirm that is ok. Next issue, which is, as usual, my wrongdoing. When I locked my iPod it used to show the time, pls advise

Hello to my always excellent community who always gives me the right answers. I switched my iPod Nano library from my PC to my new macbook air with the help of an excellent and courteous gentleman. The info on my Ipod and on iTunes still shows my Ipod Nano as a windows device, just want to confirm that is ok. Next issue, which is, as usual, is prob my wrongdoing. When I locked my iPod it used to show the time of day, don't even know how I got it to do that and can't remember if it stopped doing so before or after the swith. Can anyone please advise or help? I hope Thank you and if you do reply, thank you in advance for my lack of tech terms and look at my username

I see that there are a lot of views and no replies, so it's clearly a user issue...SHOCKER!!!
In trying to figure out the above; I stumbled upon the link below which taught me how to change/update my iPod Nano to show Version 1.0.2. Mac rather than the windows version 1.x.xPC it was still showing after I transferred my itunes library from my old pc to my new macbook air......I didn't dowlnload the iPod updater 2006-06-28 for Mac and once I did....whoa!!! I got my calendar and reminders on my nano now it's like a new toy all over again, just follow the steps in the below article, if I can do it, a 2 year old can
http://support.apple.com/kb/HT1339?viewlocale=en_US&locale=en_US

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but I do not want to delete/lose their data

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but since the old one was deactivated I cant update them and I do not want to delete/lose their data, re download, and start all over again. Is there anyway to go around this issue?
thanks

Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

I had a year long CC membership that expired at the beginning of the October.
After realizing that, I attempted to start a free trial of photoshop to work on a project. My Adobe account states that i'm on a trial, but my (Mac) dashboard CC app won't allow me to start the program. I have reinstalled both Creative Cloud and Photoshop CC but still get this message.

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I have an answer to my question. There is a bug in IOS8 that prevents third party applications to talk to the Health Application. Apple is trying to fix it ASAP

I m staying at Mumbai and one of the very well known apple ipod's reseller is offering me ipod nano 7G without bill at little cheap rate. So I want to know that if I will make a purchase from there then am I eligible for APPLE'S one year limited warranty?

I m staying at Mumbai and one of the very well known apple ipod's reseller is offering me ipod nano 7G without bill at little cheap rate. So I want to know that if I will make a purchase from there then am I eligible for APPLE'S one year limited warranty?

The warranty for ipod nano in india is here:
http://www.apple.com/legal/warranty/products/nios-ipod-english-uk.html
Im not really sure but some resellers have their own warranty.
If the iPod is brand new, it should have the apple one year limited warranty
hope it helps

I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

Try to install Adobe application Manager from below link and check
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash.

There was a RAISE without a handler. The application will now exit/

Can someone help me figure this out, I can open Acrobat and run it for about 5 seconds, then this message pops up "There was a RAISE without a handler. The application will now exit." and Acrobat Pro closes.
I am running Mac OSX 10.5.8 and Acrobat Pro 9.3.3. I have tried going back to a previous version of Acrobat but I get the same error. I am using Firefox, someone suggested it is a Safari thing, but I have never used Safari, not sure why it would be associated anyway, but trying to give as much info as I can.
Help please?

I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It.

I successfully installed Adobe Digital Edition but the application will not open

I installed Adobe Digital Edition for Windows on a Windows 7 PC. It successfully installed, but the application will not open. I double click on the icon and it gives the borders, but never opens. I have waited 30 minutes and still nothing.

It is on Windows 8.
From: shreya <[email protected]>
To: Marilyn Kelly <[email protected]>
Sent: Thursday, March 26, 2015 1:06 AM
Subject: I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
created by shreya in Adobe Digital Editions - View the full discussionYou are facing this problem on Windows or Mac ? and which version? Please let us know. Thanks If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7351396#7351396 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7351396#7351396 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

We want to confirm that the application will be compatible daylight saving

Similar Messages

Maybe you are looking for