We want to finalize a support pack strategy any pointers?

Hi,
  We want to finalize on the support pack application policy for our company. Currently we are on ECC 6.0 Support Pack 8. We have a new SAP installation. Can you please suggest some blogs or articles that elaborate on what is a good support pack application policy. i.e how frequently should we apply the support packs, compatibility issues, what all things we need to test after applying the support pack etc.
Thanks for reading.

Hi,
Support packs are basically the Program/Object Corrections & Modifications.There is no hard rule on when to apply the support packs but it always best to be with the latest (latest -1) support pack.This way you will be safe from all the know issues and will have all the new functionalities.The important thing to note while applying the support pack is to decide whether you want to maintain the modifications to the standard objects (if any) or not? a functional testing is advisable.
Regards,
Sam

Similar Messages

  • Support Pack

    Hi,
    Our client want to implement latest support packs for GRC 5.3 both ABAP & JAVA, will my ruleset also get upgraded by applying support pack SP10..?
    What are changes will happen after implementing JAVA support pack..?
    Thanks

    Please refer to the "How to apply support packages" guide on BPX:
    http://wiki.sdn.sap.com/wiki/display/BPX/Governance%2CRisk%2CandCompliance%28GRC%29How-ToGuides
    You rule set will NEVER be automatically upgraded - after all it usually contains LOTS of changes to make it suit your environment!
    Frank.

  • Support Pack Upgrade Undo

    Hello Experts,
    I am new to this fascinating world of SAP BASIS professionals and here I am again with my fourth issue. Please give your valuable advise.
    The Scenario:
    I have an ECC 6.0 ABAP+JAVA system installed. Recently I have upgraded 3 of it's software components, which are follows:
    PI_BASIS 2005_1_700     Level 0009----to-----Level 0010.
    SAP_BASIS 700               Level 0009----to-----Level 0010.
    SAP_ ABA 700                 Level 0009----to-----Level 0010.
    My Question/Issue:
    I have upgraded the above to Level 0010, but now I want to revert them back to Level 0009 (initial level), that is, I want to UNDO the SUPPORT PACK application. Is this possible? If this is possible, then how?
    Please Note: I have not taken any database backup before applying this patches, furthermore, my database is in NO ARCHIVE LOG mode.
    Help me....

    Hello,
    Since you have no backup available, the only solution is re-installing the system.
    "Fooling" the system by changing some of the PAT* tables is not a good proposition.
    There remain a lot of open questions with this approach.
    How are you going to revert your repository to the previous level ?
    Support packages not only import source code corrections but also modifications to the repository (new fields in tables, extend data elements, ...) resulting in conversions of your repository.
    By fooling the system you risk serious conflicts weeks or even months later, are you going to take that risk ?
    I hope this can help you.
    Wim

  • Roll Back Support Packs

    HI Experts,
    I have applied add-on ST and I want delete it. As of I know I think some of the things needs to be deleted from on table PAT01, PAT03 AND TEPSIN. Unfortunately, I have never done it. So, Can any one help me regarding this with some helpful steps?
    Thanks,
    I will reward points

    Hi Afi,
    With the Support Pack, many objects have been updated or added.
    I assume, that there is no easy way to delete an already implemented support package.
    If it's required, I assume, that you need make a point in time recovery.
    Why do you want the delete the support pack?
    Best regards,
    Ruediger

  • Apply support pack

    Dear Team,
    I want to update all support pack (basis ,abap,App,HR ,SPAM and some  Addon   PI, ST-PI) . I am using ECC 6.0 with Oracle on HP UX.We have 3 System Landscape.How we should apply support pack.I ThinkFirst in QAS .Then I thing Our Functional  user will analyses on function activity in QAS Server. If all is OK .Then I go to DEV and last in PRD.
    But at the time of Support Pack . We should lock all user except My User ID.
    Please explain so that I can apply all patches in my landscape
    Thanks
    Manu

    Hi,
    the role of the solution manager is for the approval of the patches.Unless you approve the patches, you are not able to download paches.
    As you thought of applying the patches in QAS is good idea.Go ahead with that.
    You need to lock the users while applying patches except your id.
    Thanks & Regards,
    Vidyadhar K

  • Objects are locked in open change requests during support packs update

    Hi All,
    We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..?  after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
    If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
    Please suggest me whether i can find the specific objects to unlock or any other process.
    Thanks & Regards,
    Sreekanth

    sreekanth jd wrote:
    Still the same error Objects are locked in open change requests is coming.
    >
    Hello,
    Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
    And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
    Thanks

  • Support Pack Upgrade Strategy

    Hi Experts,
    I am trying to develop a strategy for testing SP upgrades in development and "okaying" them for migration into production.
    What steps do you normally take to ensure your system works as intended and the update is really for production?
    I would think to go through and verify all of the changes from the SAP note which contains the SP detail, but what else? It is often the case that implementing a SP has an effect on other functionality.
    Please share your thoughts and experiences.
    Thanks,
    Grace Rae

    Hi Grace,
    Firstly, this question should be posted in the Basis forums You will have more experts who dealt with these activities there.
    Regarding the support pack upgrade strategy, we would normally implement it in the test systems, and closely monitor the system performance in peak and normal hours, background jobs, and any other issues that are highlighted during the monitoring period. If there are no issues reported by the functional testing team, we will go ahead implementing it in production system.
    Hope this helps!
    Regards,
    Raghu

  • How to remove newly applied support pack.

    Hi all,
      i applied  support pack in my R/3  4.7 server.
    if any procedure for remove already applied support pack.
    Regards.
    Satish

    thanks for the accolade
    well... it´s true - and I highly appreciate it.
    As you surely know, this IS a topic for SAP now for a
    long time. Our hosting services face very similar
    problems than customer landscapes.
    This "landscape management" was - afaik - at least
    one of the good intentions behind new products like
    solution manager.
    Anyhow - and this is my very personal view only and
    of course in no way the view of SAP - these solutions
    seem sometimes like "breaking a butterfly on a
    wheel"...
    Not only that, it doesn´t help in those 1000 basic tasks like those mentioned, it even makes it worse, much worser, than any sqlplus statement can do harm to your system. Without wanting to step on someones toes and with all appropriate respect: It´s a typical prove for an example of highly educated academical but theoretical people  trying to solve practical problems -  It´s getting better, no doubt, but there´s still a pretty long way to go before it will really help.
    I´m of the opinion: If SAP has the strategy "everything is in the database", then please give us tools to maintain that data, if you don´t want people to do that manually using database tools. A "maintenance optimizer" guided procedure is certainly nothing, that really helps
    The CCC-situation is also something I'm aware of.
    Saving maintenance fee on this way does come with a
    different kind of costs, that's for sure.
    Full ack.
    I also agree that for the overall solution at a
    customers site it's not easy to get hold of a
    comprehensive, current and well accessible
    documentation. All I can say about that is, that
    people working on this topic to make the
    documentation more available to everybody.
    The documentation is there, it´s just the vast amount of it killing brains.
    If I as administrator need to keep all those things together, like dependencies between SPs, connections to other systems, codepage issues, printers and all that stuff you deal with every day, why can´t someone from SAP do the same? I mean, SAP expects administrators to do that, why don´t they do it on their own? There are of course tools to assist (System Landscape Manager, Self Diagnose etc.) - but they are all different, all have their own glitches and additional notes, patches etc. you have to deal with ON TOP of all to make them usable for you and they all have a pretty isolated view on an isolated problem.
    As said before, all data is in the database, so use it
    A big
    obstacle with that is surely that customer landscapes
    differ widely and nearly all aspects.
    ...driven by customers? certainly not. You as SAP say "We don´t extend SD functionality any more, use CRM" and "we don´t extend purchase in ERP any more, use SRM" - but they totally forget to keep the customers able to manage those systems, interdependencies, spoken plain technically without even digging into the applications themselves. Example:
    - SRM needs a new SP
    --> dependency to a specific the PI_BASIS in R/3
    --> upgrading PI_BASIS needs a SPAM update
    --> SPAM update needs a new tp/R3trans
    --> tp/R3trans needs a new SQLDBC/Oracle/DB2/libdb 1,000,000 notes - and finding them is impossible, you will probably do the "try-and-error" approach here because there´s simply no chance to get that information at once - because of "isolated problems", isolated groups and abstraction over abstraction.
    I'm used to think of SAP solutions as a kind of
    factories. Although you can actually buy factories
    today for many standard production processes it's
    likely that the one you get will differ from every
    other factory. Documenting such a factory will always
    require individual changes.
    I don´t think so.
    If you have an ERP, CRM and SRM system, they have some sort of connections between them, this is common on all scenarios and is nothing, that is customer specific. On one side you "force" customers to use new products, on the other side you have no tools on side to REALLY´maintain those systems in a landscape aside from a Solution Manager software, that itself needs more maintenance, more mandays of configuration and more nerves to configure than all our systems together when done manually.
    And there´s stil no "support package rollback" function
    Markus

  • Support Pack error in SPAM

    Hi
    I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
    When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
    <b>
    Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
    The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
    I've checked on OSS and cannot find any notes on this error/support pack.
    Thanks.

    nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

  • BSI Tax Factory Upgrade:HR Support packs

    Hi All,
    We are starting with upgrade of BSI tax Factory from 8.0 to 9.0. And as per SAP main note '1469858' for upgrade, the support
    pack required is 'HRSP61' but we currently have 'HRSP59'. Also, CLC 61 was applied for 2010 year end activities.
    So, with CLC 61 present, would it be possible to upgrade to 9.0 without upgrading to HRSP 61 ?
    In other words I want to confirm if CLC 61 includes the Tax Factory 9.0 updates.
    Thanks,
    Avinash

    Hi Avinash,
    I just updated relevant information for your query in the following thread:
    [*BSI 8.0 becomes obsolete August 31st 2011, 9.0 troubleshooting guide here*;
    Kind regards,
    Felipe

  • SB Audigy Series Support Pack 5.3 (02/24/2015)

    This software/driver pack is unofficial, not supported by Creative Labs.
    Use it at your own risk.
    Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    - Audigy 5/RX
    For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
    Operating systems supported:
    32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
    Included in the pack:
    - Audigy series driver 3.01.0039 (Windows Vista or later) (**)
    - Audigy series driver 2.09.0016 (Windows XP)
    - ALchemy 1.45.03
    - Audio Console 1.41.00
    - DDL and DTS Connect License Activation 1.00.04 (*)
    - Dolby Digital Live Pack 3.03.08 (*)
    - EAX Console 3.00.60 (Windows Vista or later)
    - EAX Console 3.00.59 (Windows XP only)
    - Feature Mode Selection Utility 2.10.07
    - Graphic Equalizer 2.10.01
    - MediaSource DVD-Audio Player 2.00.78 (***)
    - SoundFont Bank Manager 3.21.02
    - Speaker Calibrator 1.60.14 (Windows XP only)
    - Speaker Settings 2.10.05 (Windows Vista or later)
    - Speaker Settings 2.10.04 (Windows XP only)
    - Surround Mixer 4.00.76 (Windows XP only)
    - THX Setup Console 2.20.08 (Windows XP only)
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    (**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
    (***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
    Does this driver improve sound quality or performance Are there any tweaks ?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    Fixes and improvements:
    - Fixed Audigy 5/RX support.
    - Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
    - Fixed driver installation issues on Windows 10.
    - Fixed Audigy "1" or Audigy 2 mute issue.
    - Audigy RX is now fully supported.
    - EAX Console now works on Windows Vista or later.
    - Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
    - Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
    - Added instructions on how to install the Gameport.
    - Fixed missing speaker settings strings on Windows XP when DDL is enabled.
    - Improved driver installation, less confirmation prompts.
    - Improved setup procedure and scripts.
    - Removed Encode switcher for now, only DDL is available.
    - Installation now customizable, select what you want to install.
    - New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
    - CMSS2 is now available.
    - OpenAL 64-bit support.
    - Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
    - Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
    - Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
    - Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
    - EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
    - Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
    Undocumented fixes by Creative (not listed in the release notes):
    - Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
    - Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
    Release Notes:
    IMPORTANT: Driver uninstall on Windows Vista or later
    The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
    To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
    If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
    As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
    HOW TO INSTALL THE GAMEPORT DRIVER
    You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
    Just follow the steps shown in the screenshots.
    WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
    - Configure all settings and shutdown. Your settings will be saved.
    - This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
    - On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
    No problem With 62 or fewer buffers.
    OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
    There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
    The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
    Workarounds:
    - install the 32-bit (x86) version of Windows XP.
    - limit to less than 4GB the amount of RAM available to Windows.
    - enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
    - install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
    Karaoke effects make the audio play in mono
    You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
    Optionally, follow the steps below.
    Open EAX Settings, select a Karaoke effect, then click the Edit button.
    Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
    Repeat the steps for all Karaoke effects.
    These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows XP or later
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows Vista or later
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Equalizer and EAX effects are not available when using OpenAL or ALchemy
    Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
    There is no sound in games with OpenAL support
    Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
    Equalizer settings are not applied after using OpenAL or ALchemy
    After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are lost when speaker configuration is changed
    Bass and treble settings reset to their default values when speaker configuration is changed.
    Download:
    Filename: Audigy_SupportPack_5_3.exe
    File size: 120 MB
    CRC32 hash: 76110093
    SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
    Mirrors: Google Drive
    All files are property of Creative Technology Ltd, unless otherwise noted.

    Originally Posted by Dave_
    Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
    Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
    Anyway, I have a suggestion.
    Run EndPtUtl.exe found in the Audio Console installation folder.
    If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
    EndPtUtl.exe enables the use of any device for outputting encoded audio.

  • ABAP + Java Support Pack installation

    When updating support packs in an ABAP+Java environment (ECC 6.0), is there any reason why one could not do the Java Support Packs first, followed by the ABAP support packs?  We are trying to update our support packs as efficiently as possible, and would like to update our java support packs first, followed by the ABAP stack a few days later.
    In regards,
    Michael

    Hi!
    There can probably not be a general answer to that question. There are some functionality where ABAP and JAVA are closely linked and where you'll most likely run into problems if the levels do not match.
    Technically there is no problem as applying the SP-Stack for Java and applying SPs for ABAP are independent (technical) tasks, but you will have to VERY carefully check the dependencies and carefully test this in a QA-environment.
    If you want my advice: Try to find a 'big shot' solution where you do all in one move.
    Regards,
    Jörg

  • Error occured while tranferring file in support pack

    I am Applying support pack in my QAS Server. When I have apply Support Pack of ABAP from SAPKA70009 to SAPKA70012 . It proper work. But when I am applying SAPKA70013
    via Frontend it give messege.
    An error occured while tranferring file
    'E;\sapdownload\SupportPack\KA70013.CAR'from the
    frontend computer.
    In my PC from where i am applying Patch . All drive space is ok and In my QAS server all file system is OK.
    Where is the problem.
    Thanks
    manu

    quality:qasadm 4> SAPCAR -xvf KA70013.CAR
    processing archive KA70013.CAR...
    x EPS/in/CSN0120061532_0027618.ATT
    x EPS/in/CSN0120061532_0027618.PAT
    what is the location of this extracted file? just move the extracted file into /usr/sap/trans/EPS/in then
    Now When I login in QAS server in Client 000 via DDIC.
    When I run SPAM and Load package from Application Server
    It ask SPAM Confirm Load
    path of EPS inbox :/usr/sap/trans/EPS/in
    Do you want to Upload OCS package from EPS inbox
    I press Yes
    Regards
    Subhash

  • ESS benefits and payment not displaying after support pack update

    Hi All,
    After the latest HR support pack update ESS benefits and payment not displaying
    SAP ECC 604 EPH5
    SAP_ABA 702
    SAP Kernel :  720_EXT_REL
    Kernel Patch number : 439
    Netweaver portal version - 7.30
    please help
    Regards
    Rahul

    Hi Siddharth & Jwala,
    the issue got fixed, by changing the order of Payment above the Benefits
    1. i made some options to be disabled & enabled in both benefits and payment
    2. Then in the portal i could see the benefits and payment
    3. inside the benefits & payment i was able to see two option 1 is for benefits & other is for payment
    4. we only wanted payment functionality to be displaying
    5. so i tried to hide the benefits then noting was getting displayed in the portal
    6. finally i changed the order of the payment just above the benefits
    then then i was able to see the benefits and payment inside that i was able to see the payment where i was able to see the payslip
    i am not sure what i have done but i is working but please let me know what the problem was actually
    Regards
    Rahul

  • Import Support pack in Portal system with ESS & NWDI.

    Hi ,
    NW Portal system has the current support pack level of JAVA stack 11 which includes ESS business backages SAP_ESS 603 SP1, BP_ERP5***,BP_ERP5COM,BP_ERP5ESS, BP_ERP5HRA, BP_ERP5PSS 1.0 SP12. We are using NWDS for doing some customizing the ESS portal iViews configuration and transporting through NWDI tracks.
    If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
    At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
    As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
    Thanks
    John

    John,
    If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
    JSPM only
    At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
    May be you want to trigger data push manually once from all system to make sure if everything is working fine , other than this nothing
    As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
    Its good to go with latest , but to be in sync with ECC you can continue with 7.0.
    Regards,

Maybe you are looking for