WE19 - Test tool for IDOC processing

Hi:
As we know WE19 is the test tool, and it has downside that it translates everything into upper case.
Even SAP has a note for it, stating that it is not going to change. but it gets changed everything in upper case .
In Our requirement; some fields` value in lower case (or partially lower case) are required by using this tool, it converts these into upper case and hence our process does get failed.
Let me know if any exit or bapi or some other solution for it.
<REMOVED BY MODERATOR>
Thanks in advance.
Regards
Shashi
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 4:07 PM

Hi,
Do I understand that correct that SAP says in a note that the data will not be converted to upper case in WE19, but it is getting converted anyway?
In this case I would definitely raise an OSS message because according to SAP WE19 is not supposed to change the entries into upper case.
If I misunderstood your comment then the only possibility would be to hook into one of the user exits. Every IDOC that is created uses a function module that processes the IDOC and passes the data to the application. The user exit you can use depends on which IDOC type you are using. The import function modules start with IDOC_INPUT_*. Once you find out which function is used just look into the coding to identify the user exits. Use an exit at the beginning to convert the data before it is passed to the application.
Hope that helps,
Michael

Similar Messages

Problem with WE19 Test tool for idoc process

Hi,
I have a idoc in 51 status. This idoc is used for order creation and its an inbound idoc.
This idoc has around 2000 line items. On checking the status for this idoc, i find that in a particular line item(223) error is showing.
So in WE19, I entered this idoc no. and deleted all the line items below the error line item. Now when I click on 'Standard Inbound', I am getting error mssg 'Receipient port invalid', 'idoc was saved but cannot/ should not be processed'.
How to correct this. After this idoc is processed and generates a sales order, I want to insert the error line item and find the issue.
Please help.
Thanks & Regards,
Hari Om

Hi,
Receipient port invalid You must have taken the IDOC from Production and put it in the development or quality I guess.That is why system gives this error.
To solve this issue Click on edit control record fields that is first line. Change the port for the reciepient for example change it from SAPproduction to SAP development /SAP quality
Incase of further queries please reply
Regards
Mano

Test tool for IDOC processing issue

Hi
I am doing a IDOC to File Scenario
Please clarify me
The RFC destination and Port which I have created in ECC I am getting the same in the "Edit Control Record Fields Receiver Tab"
But
The RFC destination and Port I have created in XI is not appearing in the "Edit Control Record Fields Sender Tab" (when I pressF4)
where I should have to check for this errors.
Please check this link
http://www.flickr.com/photos/33169400@N05/3097589223/
thanks
manian

Thanks Creasy for your reply
Actually I am following the below link.
Pls refer Step4 Page 6. He has selected tRFC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa-middleware/soa-management/exchange-infrastructure/a%20step-by-step%20guide%20on%20idoc-to-file%20using%20business%20service%20in%20the%20exchange%20infrastructure%20integration%20directory.pdf
thanks
manian

We 19 rest tool for idoc processing

hi to all abap gurus
i heard that we19 is test tool for idoc proceesing and it is also also used for idoc deletion .
may i know what is idoc testing why it is required . can u pls explain n in detail ?
and so many options are there in we19 tcode like inbound function module .
and tell me how to create idoc dynamically and send to the other system by using we 19 tool
thanksssss in adavance

Intermediate Document
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data. IDoc is not a process.
-         IDocs are stored in the database.
-         In the SAP system, IDocs are stored in database tables.
-         IDocs are independent of the sending and receiving systems.
-         IDocs are independent of the direction of data exchange.
Creation of IDOCs
?         Transaction code: WE 30
Defining Segment:
Creating Segment : Tcode - WE31
Creating Message Type : Tcode - we81
Assigning Message type to Idoc type: Tcode - we82
Process
The two processes for IDoc are Outbound Process and Inbound Process.
Outbound Process
When the data is sent out from the system, the process is called Outbound Process and the IDoc is known as Outbound IDoc.
Inbound Process
When the data is coming in, the process is called Inbound Process and the IDoc is known as Inbound IDoc.
Outbound Process (Sending System) Steps :
1) Goto Tcode SALE:
Click on Sending & Receiving Systems à Select Logical Systems
Here Define the Logical Systems à Click on Execute Button
Go for New Entries
1)       System Name : LOG1
Description: Sending System
2)       System Name : LOG2
Description: Receiving System
Press Enter & Save it will ask for Request if you want new request create new request or press continue for transferring the objects.
Assigning Client to the Logical System:
Select Assign Client to Logical Systems -à Execute
Ø      100 à Double click on this and give the following information
           Client                   : Sending System
           City                      : Chennai
           Logical System    : LOG1
            Currency                   :
            Client role                  :
Ø      250 à Double click on this and give the following information
Client                     : Receiving System
City                        :
Logical System    : LOG2
Save this Data.
Step 2) For RFC Creation:
-         Goto Tcode SM59 à Select R/3 Connects
Click on create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
Give the information for required fields:
RFC Destination    : LOG2
Connection type     : 3
Target Host              : sappdc.wipro.com
System No              : 00
Client                       : 210
User                            : Login user name
Password                   :
Save this & Test it and Remote Login
Step 3) Goto Tcode BD64: - Click on the change button
Click on the create model view
Short Text: model view
Technical Name: LMOD
Save this & press ok
Select just created model view
Name: "LMOD"
Goto add message type
Model Name : LMOD
Sender           : LOG1
Receiver          : LOG2
Message type: ZAZHARMESS
Save and press Enter.
4) Goto Tcode BD82:
Give Model View   : LMOD
Partner system      : LOG2
Execute this by pressing F8
It will gives you sending system port No: A00000000089 (Like)
5) Goto Tcode BD64:
Select the model view
Goto à Edit à model view à Distribute
Press ok & Press Enter.
Run your Zprogram
REPORT ZIDOC1                             .
DATA: Begin of imara occurs 0,
matnr like mara-matnr,
mtart like mara-mtart,
end of imara.
DATA: wamas_con LIKE edidc,
imas_data LIKE edidd OCCURS 0 WITH HEADER LINE,
icom_con LIKE edidc OCCURS 0 WITH HEADER LINE.
PARAMETERS: e_matnr LIKE mara-matnr,
e_msgtyp LIKE edidc-mestyp,
e_rcvprn LIKE edidc-rcvprn.
retrive app. data from DB
SELECT matnr mtart FROM mara INTO TABLE imara WHERE
matnr = e_matnr.
*Master idoc control record
wamas_con-rcvprt = 'LS'.
wamas_con-rcvprn = e_rcvprn.
wamas_con-idoctp = 'ZAZHARIDOC'.
wamas_con-mestyp = e_msgtyp.
master idoc data records
LOOP AT imara.
imas_data-segnam = 'ZAZHARSEG'.
move imara to imas_data-sdata .
APPEND imas_data.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = wamas_con
TABLES
communication_idoc_control = icom_con
master_idoc_data = imas_data
COMMIT WORK.
6) Verifying Transfer of IDOCs Tcode - we05
ALE/IDOC Status Codes (outbound):
01    à IDoc Added
30 à IDoc ready for dispatch
29 à Error in ALE service Layer
12 à Dispatch ok
      03 à Data passed to port ok.
Inbound Process (Receiving System) Steps:
Do the same step as you did in sending system
ü      Creating IDoc
ü      Defining the Segment
ü      Creating Message Type
ü      Assigning the Message Type
ü      Defining the Logical System
ü      Assigning the Logical System
ü      Creating the Distribution Model
Goto Tcode - we57:
Assign function module to IDoc type
Module: Function module
Basic type:
Message type:
Direction: 2 (inbound)
Creating Inbound process code - we42
Verifying Idoc List Tcode - we05
ALE/IDOC Status Codes (Inbound):
50 à IDoc Added
51 à Application Document not posted
64 à IDoc ready to be transferred to application
62 à IDoc passed to application
53 à Application Document posted
Useful transactions for IDocs
BD87 : Status Monitor for ALE Messages
SALE : Display ALE Customizing
WE02 : Display IDoc
WE05 : IDoc Lists
WE09 : Search for IDoc in Database
WE19 : Test tool
Check this link,
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/step%2bby%2bstep%2bprocedure%2bfor%2bcreation%2bof%2bidoc

Create test data for idoc

can any body tell proficeint in creation of test data for idoc. plss respond immediately

hi..
Using the Transaction IDOC Test Tool Tcode (WE19) we can Generate an IDOC
1. Based on an IDOC type
2. Based on a Message type
Then Fill the Segment Records with Test data .
We can use this Test idoc for Outbound or Inbound processing.
<b>reward if Helpful.</b>

Function module creation for IDOC processing...

hi Experts,
             i want to create a function module for idoc processing..
message type: zashpmnt
idoc type : shpmnt05
plz tell me which standard FM is used... and tell me what changes i want to do in it....
Tnx in Advance..

Hello,
         If you are trying to process an Outbound IDoc for the SHIPMNT05 IDoc Type with an Extension, you can use the IDOC_OUTPUT_SHPMNT Function Module which is assigned to SHPM Process Code.
       In Addition, since you have an IDoc Extension, you are required to populate the Custom Segment / Fields. For this, there is a Customer Function / Exit called EXIT_SAPLV56K_002 which you can use it for adding your Custom Segments to the IDoc ZSHPMNT05.
       If you are writing code in this exit, make sure to create a Project in CMOD.
       Also, ensure that you've made the assignment in WE82 with the Message Type , IDoc Type & the Extension.
       For Inbound, if you would like to Create a Custom Function Module, you can follow the Naming Convention Z_IDOC_INPUT_SHPMNT for which you are required follow the below Steps.
1. Register the FM as Inbound FM in BD51 T-Code.
2. Assign the FM to IDoc Type & Extension in WE57.
3. You'll need to Create a Custom Process Code in WE42 in which you are required to make add your FM.
4. Maintain Partner Profiles in WE20.
5. Have the Process Code Migrated to the Testing Environment as creation of Custom Process Code is a Customizing Activity and it requires a Customizing Request to be created / Migrated.
6. Define the Parameters as defined in the Standard Inbound Function Modules such as IDOC_INPUT_ORDERS , IDOC_INPUT_DELVRY etc.
Thanks and Regards,
Venkat Phani Prasad K

Stress test tool for Developer 6i

Hi!
I'm looking for a stress test tool for a client/server 6i Forms/Reports application.
Any suggestions appreciated!
Br Niklas Danielsson

Mercury Loadrunner should do it.
Check the Web.

Batch job for IDOC processing in 64 status

Hi experts ,
i want to know the name of Batch job for IDOC processing in 64 status.
I have configured the partner profiles as 'process immediatly'.
So with this configuration whenever an idoc comes in production it gets processed immediatly and automatically.
i want to know how they are getting processed automatically.
is there any job which looks for these idocs(in 64 status and process immediatly flag) and process it.
What is the trigger for thiese idocs processing???
Please guide me
thanks in advance
Anit gautam

Hi Thanks for ur reply.
=====Upon arrival, "process immediately" should fire that process =====
how it is getting fire?
means is there any batch job running which looks for idoc in 64 status or is there any event which get triggered when an idoc
comes in 64 status.
why we use OYEB transaction???
Regards

Load Test Tools for CC&B 2.2?

We are evaluating four load test tools for CC&B 2.2. JMeter (Free), BadBoy (Free), TheGrinder3 (Free), Selenium (Free) and Loadrunner 9.5.1.
1) Does anyone out there have a load test success story to share? If so, be sure to mention which tool or tool combination.
2) Can anyone recommend another solution we might want to evaluate?
3) It appears none of these tools work "out of the box" with CC&B. GUI rendering mode fails ajax calls. Does anyone have a trick for working around/through this issue?
At this point, it appears the best options are:
1) Use a combination of JMeter and BadBoy. We record the gui navigation in BadBoy and run the script in JMeter. JMeter doesn't support https GUI capture, but it seems to be the better tool for running the scripts and analyzing the results. BOTH TOOLS ARE FREE.
2) Loadrunner VuGen. Fails on replay due to the ajax calls. Manual scripting is the only workaround found so far.
TheGrinder3 has no GUI replay. You can't watch the replay. Also, passwords are clear text.
Selenium only works with Firefox. LVVWD doesn't use/support firefox.
I should also mention that our criteria assumes minimal load testing in the near future and are trying very hard to avoid spending big $$$ for upgrade and maintenance fees.

My company used AppLoader to run tests through NRG Global. We didn’t have a lot of people to dedicate to the testing, so we paid NRG a consulting fee to do it for us (for surprisingly less than we thought!). We had them test a Citrix & .net client/server application (with 300 users) and an Apache web application with Ajax (150 users). AppLoader is protocol independent, so it worked just fine with both. Also, it tests from the front end, so you can watch the GUI replay. They also have password encryption, although we didn’t use it for our tests.
They were able to run the tests & get the data back to us quickly. We ended up with some failures & errors, but they gave us a detailed report with screenshots, logs & graphs which enabled us to find the problem, get it fixed and get our application up quickly. Turns out we had a memory leak. It was a relief to have the test done so fast, thorough & without the huge price tag. I spoke with the consultant there directly. She was very nice & helpful walking me through the results. Hope that helps. Good luck!

I am looking for a load testing tool for my flex application

I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.

Do you have iPad 1 or 2?
You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
You can connect iPad 2 via VGA or HDMI.
I like Epson or Sony for projectors.

Testing Tools for SAP & SAP BIW

Hi Forum ,
will any body pls let me know what are available testing tools for SAP and SAP BIW? Which tool is popular and mostly used? Does any one provide training for this tools?
Regards
Suhel

Hi,
For SAP R/3 we use CATT and ECATT tools.
Both are very useful tools and generally used for automated functional testing.Reduces a large amount of cost and human effort.
Even you can convert or call external tool scripts like mercury QTP etc from ECATT and run from ECATT itself.Also you can use these tools with solution manager to get awesome effortless testing and test plan management.
Check my weblogs.
Part-1:Shows how to create a Parameterize CATT script.
/people/community.user/blog/2007/02/05/create-and-migrate-catt-to-ecatt-part-1
Part-2:Shows how to migrate CATT to ECATT script.
/people/community.user/blog/2007/02/06/create-and-migrate-catt-to-ecatt-part-2
1./people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
   This one shows the minimum configuration required for QTP and ECATT integration on client and server side.
2./people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
   This one shows the standalone mode.e.g.mercury script is created and uploaded to ecatt and then executed from ecatt itself.Also,It is now possible to call this script from Solution manager.
3./people/community.user/blog/2007/01/22/integrating-ecatt-mercury-qtp-part-3
   This one shows the integration mode which is most powerful as we can run QTP scripts from ECATT,Upload & download modify existing etc.
Please reward points.

Reporting tools for idoc

hi,
can anybody tell me what are the reporting tools for idocs.
thank you very much.

Hi,
Can you make your question a little clear, i mean what do you actually mean by saying reporting tools for idoc.
regards,
Syed

Automated Test tools for Forte 4GL ....

We're investigating a variety of automated testing tools for our Forte 4GL applications. Some of the companies mentioned are ClassIQ, Mercury and Rational. Does anyone have any experience with any of these test tools ? Any suggestions or comments (pro or con) would be appreciated !
Thank you.

We're investigating a variety of automated testing tools for our Forte 4GL applications. Some of the companies mentioned are ClassIQ, Mercury and Rational. Does anyone have any experience with any of these test tools ? Any suggestions or comments (pro or con) would be appreciated !
Thank you.

Need information on open source testing tools for ADF web applications

Hi experts,
I need to investigate on new feasible open source Java testing tools for testing ADF web applications. I have tried to google a lot but getting confused.
My requirements as as under:
1. The tool must be open source.
2. It should be easy to understand and to work upon by the tester and developers.
Selenium based testing approach is already in place for testing the application but need to search for tools other than Selenium which shall prove suitable for testing ADF applications. Kindly let me know your inputs / suggestions.
Thanks a lot in advance.
Neelanand

Hi,
Have a look at JMeter http://jakarta.apache.org/jmeter/index.html
1. The tool must be open source.It is.
2. It should be easy to understand and to work upon by the tester and developers.I guess it is.
There are some specifics in configuring it for ADF, but Chris Muir wrote a nice blog about how it's done, check it out http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Pedja

Load testing tools for shrepoint 2013

Can anyone give detailed comparison of load testing tools for sharepoint 2013
Nishanthi N

Hi,
Please check the following urls
http://www.sharepointcolumn.com/sharepoint-performance-testing-tools/
http://sharepointdragons.com/2012/12/26/the-great-free-performance-load-and-stress-testing-tools-that-can-be-used-with-sharepoint-verdict/
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

WE19 - Test tool for IDOC processing

Similar Messages

Maybe you are looking for