WE20 - Pack size not working/IDOC packaging not working - PI 7.1

Hi all,
My requirement is to collect idocs and send to PI at one point of time in a day.
I kept Pack.Size = 100 in partner profile (WE20), in PI 7.1 - Sender Communication channel I assigned the same value 100 to pack size.
Now the problem is when I create more than 10 idocs and trigger manually by rseout00. for example
15 idocs are pushed to PI by executing RSEOUT00. In PI when I check IDX5 or SXMB_MONI, 2 message ID's are generated one with 10 idocs and the other with 5 idocs.
It works fine meaning creates only one message id if the total count of IDOC's are 10 or <10.
Any ideas/suggestions appreciated.
Thanks,
Krishna

Yes Prateek,
In Sender Communication channel - IDOC package size is assigned as '100' and only 10 idocs are collecting for one message id.
I checked the assignment and it was correct. I changed the description, saved and activated Sender agreement & Sender Communication Channel.
No luck.
Regards,
Krishna

Similar Messages

IDOCs Packaging ? Need some clarification ;-)

Team,
Simple scenario:
=> JMS (xml) --> ( XI ) --> (IDOCs) --> SAP ECC.
This is scenario working fine.
However, If we have 10 IDOC, we have 10 LUW on the backend system (not good for the performance).
To avoid these multiple luw, we are using the IDOC packaging approach (no ccBPM) the wizard (idxpw).
So
1) XML messages are coming in XI
2) Since we have a filter (sxmsfilter), messages are kept aside for a while
3) Until a job (created using idxpw) wake up and start processing the messages
Our questions:
When does the packaging trick arrive ? We do not see the messages in IDXP (with the package icon), but with the yellow dot
thank for you help
MO A+

Hi XI Team,
Have a look at Sravya's blog
/people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
Usually IDOC packaging is created at the sender side as explained in the blog. Have never tried IDOC packaging at receiver end.
In our case, we changed the IDOC XSD to unlimited and used it. It will create a single message in XI.
But in R/3 it is not an IDOC package. It will be a collection of IDOC. Each will trigger a new LUW.
Hope the weblog will give you some idea. If you are able to create an IDOC package at th R/3 do update us. I will give this scenario a try tomo. It is 12:20AM my time
Good Luck
Regards,
Jaishankar

Error while processing SHPMNT in using big pack size 20 but not if 1

Hi Experts,
I am trying to to process status 64 SHPMNT IDocs via background job using program RBDAPP01.
When I try to use Pack Size 20 (minimum preferred/suggested by SAP for better performance), I am encountering the status 54 error message "Processing terminated because not required or possible" when the SHPMNT IDocs are pointing to the same Shipment document.
According to the error message:
Processing of this IDoc is terminated because it is unnecessary or impossible. Reasons for termination may include:
1. The IDoc appears twice in the IDoc packet you just processed
2. The data included in the IDoc you entered does not provide unique identification of the application document concerned. For example, you enter the primary identification using field EXTI1. There could be two application documents with the same 'external identification 1'. In this case, there would be no way to tell which document should be changed.
So, I got the idea of trying Pack Size 1 and it worked!
So in conclusion, SAP (by default) does not allow processing of multiple SHPMNT IDocs referring to the same Shipment document in one packet.
Is it possible to disable/turn off this check so that SHPMNT IDocs will be processed using Pack Size 20 even if they are referring to the same Shipment?
Thanks and Regards,
Ruix

Hi Ruix,
We are running to exactly similar problem, Can you please share how you have resolved this issue?
Many thanks in advance!!!!
Regards,
Kumar

Elements 6 picture package not working!

Running Vista 64 and trying to print two photos into a picture package. The screen comes up I have two pics in left hand box and 1st pict shows when it has indv. prints but when i use the drop down to switch to pict pack is shows a blank page in the middle. I have tried draging pics to center get a warning about some cropping will occur I hit ok but nothing show in the center box. Help!!
Thanks
kent

Tried trashing the pref files you suggested, and still the same thing. I can open the Picture Package module, select a layout, and click in one of the boxes on the template. Then the photo opens in the background, the Layers palette shows the background layer and everything comes to a halt. The Contact Sheet module doesn't work, either; it does the same thing: The first photo in the folder I choose to make a contact sheet opens in the background and shows in the Layers palette and then the whole thing bogs down.
Interestingly, when I force quit, the entry for Photoshop Elements does not have the usual 'not responding' message next to it. Also, the OK button sort of slowly pulses like Elements is thinking, but not acting.

My iPhone 5 has a grey-ish blue splodge on the screen. What is it and how can I get rid of it? The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it to hard, not that I remember.

The place that has the spot is about the size is about 2cm,it still works where the spot is. I haven't sat on my phone or hit it too hard, not that I remember. I noticed a while ago. Will it disappear? I can see the things that should be where the spot is eg it's on the keyboard and I can see the keys. Will this spread to the whole screen? How can u get rid of this?

If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

Package not working

I migrated from JDK1.3 to JDK1.4. Paths are set to bin and even classpath is set to c:\jdk1.4\lib;. The program is compiling and running fine.
The problem I come across is that when I use Packages in my program the program would not compile showing that package so and so does not exist and cannot resolve symbol etc. Even the programs that I compiled when I had ver1.3 doesn't seem to compile in JDK1.4. My platform is win2000 Professional. Please help me regarding this.

Thank you for your advice. It went wrong in setting the class path. I set it to c:\j2se1.4.0\lib; This created the problem. I removed this line in the Environment settings and package is working fine now. Thank you for your suggestion anyway.
Yours friendly,
Saravana Kumar. J

Do you know if it's possible on an iPad to set the image quality/size or do we just have the one size - the photos I've taken work out at approx 8 x 6cm @300ppi - not that big!

Do you know if it's possible on an iPad to set the image quality/size or do we just have the one size - the photos I've taken, work out at approx 8 x 6cm @300ppi - not that big!

8cm * (1 in/2.54cm) * 300 dpi = 944 pixels (should be 1280 if this is the back camera)
6cm * (1in/2.54cm) * 300 dpi = 708 pixels (should be 720 if this is the back camera)
The back camera on iPad 2 is 1280x720 = 0.92Mp. No way to increase that.

Print size in Photoshop CC does not work after updating

Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
Can anyone help please?
thanks
Fujibill

Check the Image>Image Size and see what the print size is supposed to to be for the open document.
Also, resetting the photoshop cc preferences might fix it.
http://forums.adobe.com/thread/375776?tstart=0

[SOLVED] bibble5pro aur package not working?

Hi together,
i did
yaourt -S -aur bibble5pro
and installed this package. Worked without error, but by starting bibble5pro i got this:
[vinschni@myhost ~]$ bibble5pro
Install Path: /opt/bibble5pro
LD_PATH: /opt/bibble5pro/lib:
XLIB_SKIP_ARGB_VISUALS: 1
linux-gate.so.1 => (0xb7810000)
libkodakcms.so => /opt/bibble5pro/lib/libkodakcms.so (0xb7795000)
libuuid.so.1 => /lib/libuuid.so.1 (0xb7773000)
libtcmalloc_minimal.so.0 => /opt/bibble5pro/lib/libtcmalloc_minimal.so.0 (0xb7741000)
libQtSvg.so.4 => /opt/bibble5pro/lib/libQtSvg.so.4 (0xb76f5000)
libQt3Support.so.4 => /opt/bibble5pro/lib/libQt3Support.so.4 (0xb740f000)
libQtSql.so.4 => /opt/bibble5pro/lib/libQtSql.so.4 (0xb7376000)
libQtOpenGL.so.4 => /opt/bibble5pro/lib/libQtOpenGL.so.4 (0xb7301000)
libGLU.so.1 => /usr/lib/libGLU.so.1 (0xb7293000)
libGL.so.1 => /usr/lib/libGL.so.1 (0xb71cf000)
libQtNetwork.so.4 => /opt/bibble5pro/lib/libQtNetwork.so.4 (0xb70d2000)
libQtDesigner.so.4 => /opt/bibble5pro/lib/libQtDesigner.so.4 (0xb6df6000)
libQtScript.so.4 => /opt/bibble5pro/lib/libQtScript.so.4 (0xb6cd5000)
libQtXml.so.4 => /opt/bibble5pro/lib/libQtXml.so.4 (0xb6c90000)
libQtGui.so.4 => /opt/bibble5pro/lib/libQtGui.so.4 (0xb63a8000)
libpng12.so.0 => not found
libSM.so.6 => /usr/lib/libSM.so.6 (0xb639f000)
libICE.so.6 => /usr/lib/libICE.so.6 (0xb6388000)
libXi.so.6 => /usr/lib/libXi.so.6 (0xb637b000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb6372000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0xb636a000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb62e5000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb62b7000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb62a9000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb618f000)
libQtCore.so.4 => /opt/bibble5pro/lib/libQtCore.so.4 (0xb5f69000)
libz.so.1 => /usr/lib/libz.so.1 (0xb5f54000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0xb5f50000)
librt.so.1 => /lib/librt.so.1 (0xb5f47000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xb5e82000)
libdl.so.2 => /lib/libdl.so.2 (0xb5e7e000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb5e64000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb5d6d000)
libm.so.6 => /lib/libm.so.6 (0xb5d47000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb5d2a000)
libc.so.6 => /lib/libc.so.6 (0xb5be3000)
/lib/ld-linux.so.2 (0xb7811000)
libpng12.so.0 => not found
libpng12.so.0 => not found
libpng12.so.0 => not found
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb45d2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0xb45cf000)
libpng12.so.0 => not found
libpng12.so.0 => not found
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb45a9000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb4590000)
libpcre.so.0 => /lib/libpcre.so.0 (0xb455d000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb455a000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb4555000)
./bibblepro: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Is there maybe missing a dependency in pkgbuild? Starting with root access dosen't make a difference. Hope somebody has an idea.
Greetings,
Vinschni
Last edited by Vinschni (2010-04-16 12:11:51)

Got it working.
In libpng12 PKGBUILD was an error in line 26. After deleting
patch -p1 -i "${srcdir}/libpng-1.2.38-apng.patch" || return 1
build was successful.
Vinschni

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

SSIS package not working on 2012 Integration Service Catalog deployment

I've set up a package that imports data from an excel spreadsheet(my only possible data source). I deployed it and it worked for a while and then broke. I had to switch to a generated connection string for excel with IMEX=1 to make things work.
Now it works fine on from Visual Studio on my local machine, but when I run it from Integration Services I get:
"The external column "<COLUMN NAME>" needs to be updated, for every column in the spreadsheet. I am using the same excel file on my local machine as on the other machine.
Why can't I get it to work when it's deployed to the SSIS Server?

Hi,
Excel files are a bit tricky to work with. Any small change in data type, metadata can make your package fail.
I have had such experience earlier. The file contents, columns everything was same but it used to fail with same metadata issue.
Here is what helped me:
1. I tried to clear all formatting using the excel formatting options and it worked for me. But we can't ask the users to do all these things manually before uploading files to the application.
2. So, I created a new excel file and created all column headers manually. Please make sure don't copy paste from any other excel file otherwise formatting and metadata will get changed.
3. Once you have the template ready. Configure your package Excel columns according to the template.
4. Now, If you copy and paste data into this plain formatting free file, data will adapt the template settings and won't give the metadata errors.
5. We uploaded the same template on our application and users created the data in same template which resolved the issue for us.
CSVs on the other hand don't have any such issues.
Hope this helps. Good Luck!

First record is not an IDOC control record - Error

When I am trying to import orders in my test system through RSEINB00 , it is giving me this error "First record is not an IDOC control record"
But if I manually do it through test tool , it post successfully.
I tried different files which have been posted into production client successfully but still the same error.
It was working just fine until yesterday. Today I modified one file and ran it and it gave me the error. Now its giving me the error in all the file i try.
Any clues ??

Hi,
Please check the partner profile (WE20) and IDoc ports (WE21) setup, perhaps someone changed them by mistake.
Also please check the IDoc file content whether there is IDoc control record (EDIDC) information or not.
Regards,
Ferry Lianto

For the new delivery type created the Idoc is not getting triggered

Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
Geeta

I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

BI extraction error -- Application document not posted - IDOC Status 51

Hi,
I am getting the following error while extracting data from ECC to BI.
'Application Document not posted'
I went to BD87 in ECC and found that the Idoc Status is 51 and the message is
'Request REQU_4C65QV...V9QRNZ2X9TV9QRNZ does not exist in target system N05CLNT100'.
I have already checked partner profile parameters with Basis and they claim everything is okay.
Do you have any ideas what might be the issue?
Thanks,

Hello Rajendra,
You can review the note 417307 which contain information about the MAXSIZE of a package size. This is a collective note which contain more notes to other extractors.
417307 - Extractor package size: Collective note for applications
549184 - FAQ: What is important for extraction
157652 - Main memory requirement for extraction from R/3
You can review the table ROIDOCPRMS and check if the parameter StatFrqu contains a 'X' or a number? You can set this option to 99.
You can also review the correction note 1147326.
Check as well if the user ALEREMOTE have the proper profiles configured in both source and target system, sometimes the user is missing the profiles, to check this, read the note 150315.
I hope that the information can help you.
Regards,
Daniel

NetBeans package not found

Hello,
I�m using NetBeans to develop a J2ME midlet. I want to use the MMAPI. When I try to import the corresponding package using "import javax.microedition.media.*;" Netbeans tells me that this package does not exist.
But when I compile the project it works fine. It seems so that only the IDE does not know the package.
Could somebody help?
with kind regards,
Robert

Well, I doubt that an expert answer will be given in this forum, as it's about Java Studio Enterprise and it has not been tested with the mobility pack. Please try asking the same question on the Netbeans mailing list: [email protected]
From my point of view - there is something wrong with the IDE's MDR cache - try deleting <user-dir>/var/cache
HTH,
Kirill

WE20 - Pack size not working/IDOC packaging not working - PI 7.1

Similar Messages

Maybe you are looking for