Hi,
Transaction WE82, assign Idoc type to message type.
Regards
Vijaya

Similar Messages

Dynamic link between Photoshop and Flash Catalyst does not exist

Hi,
I'm a french developer and I have a question.
I didnt find any Dynamci link between Photoshop and Flash Catalyst.
Let me explain :
I have a photoshop file (.psd) and I import it into Flash Catalyst.
But I have some modification to do on my design file (psd) but the design does not update himself in Flash Catalyst .
Do you plane to add the possibility ?
Thanks a lot !
Clement
http://www.dator.fr

Given that you named the class TextDynamicLayout, it implies you are trying to handle wordwrapping text. That requires handing down the VBox's explicitWidth to the Text controls before they get measured. Wordwrapping text can be any size so it needs to have its width fixed in order to determine its height.
The List classes do not support percentages on the renderers. All renderers are effectively given a size based on the List's size (or DG Column size). You can see how explicitWidth is handled in the default renderer by looking at the source for ListItemRenderer.as.
Note that VBox or any container makes for heavy and slow rendering. That's why the default Flex renderers extend UIComponent and have custom measure() and updateDisplayList() methods.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Source System Activation - IDOC Type does not exist

I'm doing a new installation of BI7 and when I want to activate the source system on replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
Any solution?

Check my reply
Re: "Basic Type Does Not Exist"

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.
Solutions?

No, I never really found an easy solution. I believe it is an issue with some corruption in the iTunes database on the specific device. In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs. A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup. It did work, so I imagine it would probably work for my current issues with the iPhone and iPad. But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost. When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might. If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it. I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

Transaction type does not exist. Check entries

Hello all,
EBP 5.0, CCM 1.0, unicode
When I try to log on different language than English and try to shop system is displaying two messages
Internal number range is missing for transaction type. Inform syst. admin
Transaction type does not exist. Check entries
And I cannot see link for Procurement Catalog.
All my customizing up to now was in English, due to the fact that SAP did not provide translation to Croatian (Latin-2 language).
Also catalog call-up has locale "en" for the calling of catalog from EBP.
Please give hint where I can start with debugging.
Gordan

Hello Yann,
main problem, language files for CCM and EBP are not suppied from SAP yet. MY BC told me that they installed Croatian language in WAS, so system should behave as language is intalled fully and represent text in English when there is no translation.
I cannot test other things because EBP will not go into the catalog due to the missing internal numbering for the transaction type. I checked BUS2121 in transaction types but nothing to be found.
I was thinking that those two problems are related but this is not true. First I have to solve number range that check the catalog. Only common between those two problems is logon language.
I even forced our special characters by entering them as UNICODE code and I can see them via catalog manager in english, but only for catalog items. Characteristics and product category names do not follow UNICODE specification.
Confused
Gordan

Error DDIC Type does not exist

Hi All:
I got the following error in my CAF application:
com.sap.caf.rt.exception.CAFBaseRuntimeException: DDIC type does not exist: com.agile.pmg.simpletypes.tp_proposal
The problem is that this type already exist in the dictionary, and I don´t know what is the problem.
Any ideas?
regards

The Base is ECC 6.0 not yet upgraded to EHP
Anyways SAP has helped solve the problem.
Below is the solution :
3. You can use program ABADRCHECK to analyze the inconsistencies in the derivation. By selecting the checkbox 'DELSTEPS', you can automatically delete the steps recognized as inconsistent. Check the result carefully before you set this parameter. The check should always occur for all clients, that is, the checkbox 'ALLCLNTS' should remain selected.
HOW TO FIX CURRENT CLIENT COPY
(All steps to be performed in target logical system)
1. Decrease workload as much as possible
2. Execute report ABADRCHECK with selected 'DELSTEPS'
(see note 653314 for more details) -- Check point 3 above.
3. Execute TCode FINB_TR_EXEC_AI (Postprocessing of Client Copy) (Please note that any changes done between Client Copy and executing TCode FINB_TR_EXEC_AI will be overwritten!)
4. Result of FINB_TR_EXEC_AI execution
a) Executed with same error DA 300
The workload is still to high, make sure that workload is decreased and repeat steps 1. - 3.
b) Executed without any errors
Consider FINB-TR-DERIVATION part of Client Copy as completed successfully. Note, that status of Client Copy in TCode SCC3 "Post-Processing Required" is final and it's not updated based on successful execution of FINB_TR_EXEC_AI.
Information about final Client Copy status need to be evaluated and kept outside of SAP system. Or optionally, the client can be protected against any further manually triggered post processing procedure (e.g. using TCodes FINB_TR_EXEC_AI, FINB_TR_DISPLAY etc.) using the IMG activity "Complete Postprocessing". It's suggested to do so, when Client Copy is successfully repaired by repetitive execution of post processing procedure.
WHAT TO DO BEFORE NEXT CLIENT COPY
Make sure that there will be no performance issues during Client Copy processing in target logical system.

"Basic Type Does Not Exist"

I am currently working on BI 7.0 .On trying to activate Source system and the system is giving me following error
<b>"Basic Type Does Not Exist"</b>
the source system is BI system(for transfer from ODS to Infocube).
Please provide path forward.

Hi,
Seems like the ale ports and idoc aggreements are not ok within the source system setup. Rightclick on the source system and run the restore option. This will correct these errors for you. If this does not work check these:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken.
Message was edited by:
Patrick Rieken - BI-Formance B.V.

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Tried to add JUnit Test in Eclipse -- "Test type does not exist" error

Hi guys,
I'm developing an assignment whose details I won't bother going into -- it's enough to say that we were introduced to JUnit testing a couple of weeks ago in university tutorials, and I've stupidly tried to add one to my project without fully understanding it all. This is in eclipse 3.1.1.
Basically, I followed eclipse's built-in tutorial called "Writing and running JUnit tests ".
1) Created class "TestFailure" with method "testFailure".
public void testFailure() throws Exception {
fail();
} 2) This then appeared as a .java file in my project (as well as on my UML diagram, courtesy of Omondo's UML plugin).
3) I decided it was too risky mucking around with this stuff in a "live" project, so went ahead and deleted the TestFailure icon on my class diagram.
4) I closed down eclipse.
5) I went ahead and deleted TestFailure.java and TestFailure.class from my project folders.
6) I opened my project again, and tried to execute...
... and now I keep getting a Test type does not exist error when I try and run it.
How on earth do I get rid of this?
Any advice/guidance is greatly appriciated -- oh, how I wish I'd not started messing with JUnit testing!!! :)

Um, okay -- I fully hold my hands up and admit that I don't know what I'm doing with JUnit testing (we only had a half hour intro to it) but figured I may as well learn by using the official tutorials. It's always a good place to start! Although obviously using a current assignment isn't the best idea ;)
I was executing my main class (obviously with my main method in there) to execute the program after I'd deleted test case classes, but strangely I've just shut down my machine and restarted and it's working fine. I'm not sure what the deal is here -- lesson learnt though, study new topics on a dummy project! :)
Anyway, if I waited until I understood the software and code I'm producing to its fullest, I think hell'd freeze over before I executed any code! :) Using a tutorial to learn a new aspect of software I'm already familiar with wasn't a bad move, IMHO. Just using it on this particular project was... Needless stress and all that.

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch.

Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch. Cannot
scale/create batch.
While auto shipping the above error i am getting. Please somebody help on this.
Thanks.

Hi,
Could you please let us know which Oracle Product was installed and it complete 5 digit version.
Regards,
Prakash.

CIF: Business Partner Type does not exist

I am transferring vendor from ECC to SCM both as vendor and partner. While activating the integration model I get an error saying that <Business Partner Type does not exist, choose either 1 or 2 or 3>. Has anyone come across this error and solved it?

Dear Tibor,
These setting are maintained in system. Still it gives error.
Followings are the entries in system:
TB039A
CLIENT TYPE   CATEGORY XPROPOSE XPERSON XORGANISATION XGROUP TEXT
750    BUP001 BUP001                    X                    Dun & Bradstreet Number
750    BUP002 BUP002                    X                    Commercial Register Number
750    BUP003 BUP003                    X             X      Register of Associations Number
750    BUP004 BUP004                    X             X      Public Register of Cooperatives Number
750    BUP005 BUP005                    X                    Global Location Number
750    BUP006 BUP006                    X                    Standard Carrier Alpha Code
750    CRM001 CRM001            X       X             X      External System Identifier
750    CRM002 CRM002            X       X                    R/3 Customer Number
750    CRM003 CRM003            X       X                    External System Identifier for ICM
750    CRM004 CRM004            X       X                    R/3 Vendor Number
750    CRM010 CRM010                    X                    R/3 Sales Organization
750    CRM011 CRM011                    X                    R/3 Plant Number
750    CRM012 CRM012                    X                    R/3 MRP Area
750    FS0001 FS0001            X                            Identity card
750    FS0002 FS0002            X                            Passport
750    SLLIAT SLLIAT                    X                    IATA Code Airline Carriers
750    SLLSCA SLLSCA                    X                    SCAC Code (Standard Carrier Code)
ID Types
BUP001     Dun & Bradstreet Number
BUP002     Commercial Register Number
BUP003     Register of Associations Number
BUP004     Public Register of Cooperatives Number
BUP005     Global Location Number
BUP006     Standard Carrier Alpha Code
CRM001     External System Identifier
CRM002     R/3 Customer Number
CRM003     External System Identifier for ICM
CRM004     R/3 Vendor Number
CRM010     R/3 Sales Organization
CRM011     R/3 Plant Number
CRM012     R/3 MRP Area
FS0001     Identity card
FS0002     Passport
SLLIAT     IATA Code Airline Carriers
SLLSCA     SCAC Code (Standard Carrier Code)
Identification Categories
BUP001     Dun & Bradstreet Number
BUP002     Commercial Register Number
BUP003     Register of Associations Number
BUP004     Public Register of Cooperatives Number
BUP005     Global Location Number
BUP006     Standard Carrier Alpha Code
CRM001     External System Identifier
CRM002     R/3 Customer Number
CRM003     External System Identifier for ICM
CRM004     R/3 Vendor Number
CRM010     R/3 Sales Organization
CRM011     R/3 Plant Number
CRM012     R/3 MRP Area
SLLIAT     Airline Carrier IATA Code
SLLSCA     SCAC Code (Standard Carrier Code)
Thanks and Best Regards, Manoj

Currency/Valuation type does not exist

Hi,
I am parking the documents through transaction FBV1 using a journal entry custom program.The documents are getting parked succesfully. I can see the documents in transaction FBV0. I am explicitly providing the values for local currency/group currency in the upload file.
But the issue here is when I try to post these documents, I get the error "Currency/Valuation type does not exist ".
Please suggest how to avoid this error and post the documents successfully.
Thanks,
Ravindra

Hi,
You need look into the setting for the Plant in OMWC t-code
OSS note 941082
Regards,
R.Brahmankar

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

We57 link between logmessage and idoc type does not exist

Similar Messages

Maybe you are looking for