Weak flash light

hi
I have a simple problem with my device
I think flash light have been so weak after update to android 5
Could you please help me if there is any solution
( i doubt if the probloem was from the beginning or after update :-D )

If it's faulty and your device is within warranty (depending on your country) you should be able to get it repaired/replaced.
Best you speak to Apple directly to get this sorted out. Go to http://www.apple.com/support/contact/ to get started.
Hope you get this sorted

Similar Messages

  • I suddenly have two flashing lights on my keyboard by the caps lock key and over the end/pg up key.

    I encountered a problem waking my laptop (Pavilion dv7-1270us) this morning.  At first it would not wake up and had to do a hard reboot.  Now I have two flashing lights on the keyboard -the caps lock light and the one over the end/pg up keys over the number pad.  I have run several diagnostics and cannot find an answer as to what this is.
    This question was solved.
    View Solution.

    Hi,
    You're welcome and it's good to hear you've got it working
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Won't turn on, flashing light, loud buzzing when I try to charge it?

    My ipod died in April and I got a replacement from the apple store as it was still (just!) under warranty. I woke up in the middle of the night last night because my ipod was flashing - not on and off, just a blank flashing light. I tried turning it on and off but it didn't work and didn't even turn on.
    When I got up today the flashing had stopped. I tried charging it but as soon as I plugged in the lead from my computer it started making a really loud buzzing noise. I don't mean the whirring/clicking noise that seems to be common enough when they die (that's what happened my last one, but it would turn on and display the battery with exclamation mark), but a real buzzing sound.
    It started flashing again too after being plugged in for less than a minute. I left it plugged in for a while but the noise was driving me crazy so I've unplugged it now.
    Has anyone come across this problem before? I haven't dropped it or had it near liquids etc, I've been treating it like a newborn baby since the last one died! I've googled and tried searching apple support but I haven't come across anything similar. Any help would be great, thanks!

    If you connected it to both your computer's USB port and a USB power adapter on a wall outlet, I think you've ruled out a problem with the power source.  Since you at least get the red light, the USB docking cable is probably OK. 
    So, if it's not the USB port or the docking cable, the cause is likely to be on the shuffle.  It may be the battery or a problem on the logic board.  If it was just the battery, I think it would still appear in iTunes on the computer (or at least be recognized by the system).
    (If this shuffle is less than one year from purchase date, it is under warranty.)

  • Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

    Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • How do I fix Cartridge Error and flashing light message on my 4215xi all-in-one? I use windows 8.1

    This equipment was working just fine after I installed a re-filled black ink cartridge.   A few days later I began to get a flashing light with the message: Cartridge Error. See Product Documentation for details.   Sometimes my computer said the printer was offline when it wasn't.   I have also had occasional cartridge door open messages when the door was closed.    I have removed the two cartrdges, cleaned them with water by using a coffee filter as  a swab.  I have also uninstalled and, I think, reinstalled the software printer driver, but I am not entirely certain as to that.

    Hi there @donpablitosan!
    Thank you for posting on the HP Forums!
    I would be happy to help in regards to the flashing lights and cartridge error on the printer.  You had also mentioned that the computer sometimes shows the printer offline or door open errors.  I should be able to help with that as well!
    The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord.  This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting.  If the printer is no longer getting full power from the power surge or extension cord it may give false errors or have poor connection and paper feed issues.
    From what I can find it looks like you have done all the troubleshooting regarding the cartridge itself.  If you have tried the above suggestion and are still getting the same issue then you may need to try another cartridge to see if the issue is coming from the printers hardware or the cartridge.  
    Thanks again for posting on the HP Forums! 
    Please post back and let me know how it goes and enjoy your day!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Hi, I would like to know, why is it that my iPhone's flash lights every time I recieve a notification??? is there any option to turn it off?

    Hi, im from Colombia And: I would like to know, why is it that my iPhone's flash lights every time I recieve a notification??? is there any option to turn it off?
    (iPhone 4s)
    Or is it a hardware problem?
    Thanks for your help!

    Settings/general/accessibility - turn off "LED Flash for Alerts".
    Then go read the manual - http://support.apple.com/manuals/

  • N95 turn flash light on,and can't turn it off- Pro...

    Hi, I have N95-1 firmware v21.0.016. I didn’t decide yet to update new v30, because some reviews I thought that it’s better to skip this and wait next.
    The problem I experience with my device is that some time (it’s happened few times) in ordinary use (not camera use), my flash light (camera light) turn on and wont turn off even if I turn phone off. I tried removing the battery and the light goes off. As soon I put the battery back in the light comes on again even phone is still off. When I turn camera on (by opening it), light go off but when I close it it’s turn on again. I find solution, to take any picture, and after that everything goes back to normal.
    Does any one else had experience like mine? What can provoke this behavior?
    Solved!
    Go to Solution.

    First thanks for response.
    Rrangel, thanks for advice, but I can turn my flash off. It simple, taking picture (and that is the only way for that) and after that everything go in normal. I can close camera and continue to use my phone normally (no flash light on). I can turn phone off and on again, it’s will work normally and no flash light problem. However, this might happened again.
    I have 4 GB takems memo card in the phone. And phone wasn’t in contact with water or steam, it never fall or had any defect.
    First I thought it’s because some third part application. When it’s happened first time, phone was running Rotate Me, Flip Silent (that I was just installed and test how it’s will work), Advanced Call Manager, and I was rejecting some phone call. I thought it’s because Flip Silent, but second time, phone didn’t run any of those applications, I was just change theme and flash light turn on.
    First time I find out that, removing battery and restarting of the phone will not help, so I simply take picture, like first time (delete picture immediate after), and continue to use phone normally. I’m just confused what the reason is?

  • Problem with the yellow flashing light on AirPort Extreme

    I'm trying to use my AirPort Express and have a yellow flashing light. I contacted ISP and we tested the connection by plugging the modem into a PC directly, so there is a working connection. I tried the Airport utility and it identified an error, stating that no connection could be made
    I'm not sure where to go with this, my understanding is that the AirPort Express should have no trouble communicating with modems, so it can't be an issue of hardware.
    Any suggestions very welcome!

    Whenever you change whatever device is connected to your modem, be sure to power down the modem first.
    It will refuse to communicate with anything else, unless you do.

  • How to turn on Flash Light on Z10

    Is there anyway to turn on the Flash Light on BlackBerry Z10 without using any app from the AppWorld like the FlashLight and various ohter simmilar apps

    A possible combination of buttons would help. Like the one in which we press volume up and volume down button simultaneously to take a screen shot. Something like that would be helpful.
    Click on if I helped you. If my response solved your problem.

  • After instaling the ios 8.2 my camera and flash light stoped to work. I have a iphone 5c.

    iPhone 5c
    ios 8.2
    camera and flash light stoped to work

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Flashing light on Apple TV asking to connect to iTunes???

    Flashing light on Apple TV asking to connect to iTunes I don't have it that long and is not used that much and don't have the cable I need to connect is this some sort of apple apple scam because I'm furious about this!!!

    Find or buy a micro USB cable:
    http://www.amazon.com/AmazonBasics-USB-Cable-Micro-Meters/dp/B003ES5ZSW
    Then restore your Apple TV:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • HT4381 I have flashing light on the apple tv, i need to connect to itunes for maintenance, can I do it wirelessly?

    I have flashing light on the apple tv, i need to connect to itunes for maintenance, can I do it wirelessly?

    No. As the Apple TV is unresponsive you need to connect to iTunes, which is done via micro usb
    http://support.apple.com/kb/HT4367

  • We are experiencing a black screen with the Apple symbol and a flashing light.  We have tried to reset, unplugged without success

    We are experiencing a problem with our Apple TV, it shows a black screen with the Apple symbol and a flashing light.  We have tried to reset it by unplugging and pressing the main button on the devise.  Please help!

    Try a restore.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • HT4061 Does iPad MIni with Retina Display 128 GB Wi-Fi Cellular has Flash Light ?

    Does iPad MIni with Retina Display 128 GB Wi-Fi Cellular has Flash Light ?

    No, it does not. There are some apps which will turn the screen white so you can use that as a flashlight, but it does not have an LED camera flash.

  • My Apple TV has flashing light during update

    The Apple TV was working fine until I started the lastest update. It now has a flashing light on the front, and displays a blank screen on the TV. It will not Airplay either. I have not diconnectedd it, and have checked all the cables, that are connected and they are fine. Hpow can I get my Apple TV working again?

    We just had this happen today, and we were able to fix it using the restart instructions:
    Restarting your Apple TV (2nd or 3rd generation) with an aluminum Apple Remote
    Press and hold Menu and Down (buttons 3 and 4 below) on your aluminum Apple Remote for six seconds and then release when you see the LED light on the Apple TV flash rapidly.
    Hope this helps!!
    C

Maybe you are looking for

  • How do I copy music (personal & purchased) from iPod Touch to iPhone 5c?

    I have 464  songs on my iPod Touch 4th gen; however, only the 194 songs I purchased from the iTunes store show up in the iTunes Library on my Mac.  Accordingly only the purchased (194) songs are being backed up to the Cloud.  I recently purchased an

  • TS4605 I restored my iphone with a back up on my itunes and deleted all my information on the phone...

    Well, actually, it's a little more complicated than that. It all started because out of the blue, all my contacts became unidentifiable(just numbers without any names/labels.) So I looked online for some feedback and most sites said that I should res

  • How to use selection-screen in function module?

    Hello I've created a function module and i have to create within the function module a selection-screen(with select-options for entering data) but i get an error that within form routines and function modules this statement is not allowed. Can anybod

  • SAP SCript top - endtop

    Hi all, I am working on a script.I have two pages designed.The windows on first page are header,footer,main and logo.The windows on page 2 are main and footer. This is the code in the editor of main window for top an endtop. /: TOP /: POSITION XORIGI

  • Making files to a directory

    I want to creat a file to difernent folders how do i do it? I am using the print writer