Weak Wifi signal after upgrading Iphone to 4.1

I had a perfectly working Wifi home connection on a new iPhone 4 running 4.01 and 4.02.
After upgrading to 4.1 yesterday, the wifi has gone bad: the connection strength has dropped - at least- 10 fold. I have to stand next to the router to get connected. Before I had excellent connection at long distances.
Nothing has changed to the router, and I still have excellent wifi connectivity with my MacBook, iPad, and another iPhone.
Seems that the upgrade to 4.1 somehow broke the wifi connectivity.
Help!
S.

I am experiencing hte same thing. Except I started with 4.1 and I am getting very weak signal compared to my buddies iPhone which is also running 4.1. Which is weird .. I guess I will call in tommorow any ideas ??

Similar Messages

  • Weak 3gs wifi signal after upgrade to ios6

    Anyone experienced the same thing after upgrading their 3gs to ios6?
    I noticed that wi-fi signal became weaker.
    I am on the same spot inside the house and the 3gs cannot detect my connection.

    I have the same issue since I upgraded to iOS 6. My 3GS (end of 2009) has extremely weak WiFi signal from areas I used to get very strong signal. I now need to be within 12 inches of my home WiFi access point for the phone to pickup the signal. And the connection drops as soon as I am getting more than 12 inches away.
    Same behavior from our WiFi at work -- I can no longer connect on the corporate WiFi from my office space!!
    I also went to the Apple store in San Jose, and the phone was not even able to pickup the Apple WiFi signal from the middle of the shop!!! This very same phone was working flawlessly on 5.1.1 before the iOS 6.0 upgrade. I tried all the tricks people said to no available. Nothing works. My phone is useless now because of Apple!! Isn't this a trick to force people changing to newer phone?? Now I am using too much from my 3G plan and it will cost me moneys because of this..
    Apple starts to look like a Lemon to me..

  • Why did I loose the wifi signal after upgrading?

    I want to know why did I loose my wifi signal after updating my Iphone

    Have you tried rebooting the Iphone?

  • Very weak wifi signal after i change the battery

    i recently change my playbook battery. everything seems perfectly okay except that i have a very weak wifi signal reception. i need to be very near the router just to have the signal. i dont know what went  wrong during the changing of battery process but everything is okay except the very weak wifi signal received. please help.

    Looking at the photos in crackberry forum it's the white antenna cable, antenna is top RH corner as you look at the screen. There may be an antenna component inside the back (according to ifixit)  but the cable terminates in a little pcb possibly marked 3G.  Blue cable seems to be BT and grey is GPS. The TI chip supports all three functions, single cable for each. That is why 802.11n is only 65mbps.
    Come back if that's not correct.
    Thanks to crackberry and ifixit if it is.

  • Very weak wifi signal after updating to iOS 7.0.5

    I am in Malaysia, and received notification to update software to iOS 7.0.5 a couple of days ago. Since the update, i keep losing wifi signal in the house, which did.not happen before the update. Even when connected to the wifi, the signal bar shows 2 while my other iPhone 4S and iPads are showing full signal strength.
    Please advise how I can rollback to the previous version, as i have just realised this new update was meant for China.
    Please help! Thank you.

    My problem exactly! With Iphone 4! The updated phone will not connect, the other Iphone 4 not running this latest update works fine! Come on Apple!! Need a fix yesterday!

  • Iphone 3GS very weak wifi signal since 4.3.3 update

    Ever since i update to 4.3.3 (which I'm regretting now) my iphone will not connect to my wifi router unless I'm less than 3 feet from it.
    My wife has a 1st gen IPod touch (which hasn't been updated) can pick up the wifi and connect to the wed with it upto 30 feet from the router, as my iphone used to.
    Is this a 3GS issue as i've read some other posts about a similar problem. I'm not willing to accept this as a hardware problem as the minute before the updating to 4.3.3 my wifi signal strength was prefect, the minute after the update was complete the signal strength was and still is worse than sh*$e.
    I have done all the power down resets as suggested on other posts, but it doesn't work.
    Is there anybody out there that can tell me how to (if possible) to revert back to 4.3.2?????????????????????????????????????
    RLB

    I don't have the answer to this issue but I'm experiencing the exact same problem.
    Since 4.3.3 my wifi signal strength is close to nothing. When I'm 3 feet away from any router, at home or at work, I have 3 bars not even full reception. As soon as I walk a few yards away from the router, I lose the connection completely.
    I've tried everything to fix this. Reset network settings, turning off Bluetooth, disabling location services, full restore, reconfiguring routers, etc. but nothing works. I'm now using the iOS 5 Beta 3 and still no improvement to this issue.
    In this thread there seems to be some recognition from Apple that this is a known problem and indeed a software bug. Hard to know if it's true though:
    https://discussions.apple.com/thread/2815831
    The same weak wifi signal seem to happen to iPad users too: https://discussions.apple.com/thread/2387493 This thread dates back over a year, so it looks as if this problem is common but without fix.
    More threads:
    https://discussions.apple.com/thread/3014400
    https://discussions.apple.com/thread/3096274
    https://discussions.apple.com/thread/2724930
    https://discussions.apple.com/thread/3014267
    Here are my specs, for reference:
    Model
    iPhone 3GS, MC139DN
    Modem Firmware
    05.16.02
    I'll let you know if I find a fix...
    Thanks,
    Kris

  • I have an iphone 4 where a very weak wifi signal .. Is it possible solution? .. It ios 5.0.1

    have an iphone 4 where a very weak wifi signal .. Is it possible solution? .. It ios 5.0.1

    Some Users have Reported that a  Restore as New  has helped Resolve issues...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • WIFI Quit after upgrade to firmware 3.1.

    My WIFI quit after upgrading from 2.1.1 to 3.1. It worked twice since the upgrade for a period of an hour or so. I have tried to reset the network, All settings, serveral reinstallation of the firmware. I also Tried to manually enter in my WIFI information, with no success. I tried everything. I can see wifi information when I go into the general settings>About> Wi-Fi Adress 00:1c:b3:48:ce..... My warrenty is no longer valid. Any suggestions???

    I've now posted these changes at two other WiFi threads. Try these Settings changes:
    The Setting changes are:
    Fetch New Data > Push: Off
    Fetch settings are set to Manual & in Advanced all is set to Manual.
    My iPhone also lost WiFi but with the changes above it now connects though it takes a bit longer to find the signal. No longer have Push but WiFi is more important, to me anyway. Another iPhone user had success with the above changes.
    Good luck.

  • Sudden Weak WiFi signal on 3Gs

    Over the last month or so I've experienced a big drop-off in my 3Gs's ability to latch-on to my local home WiFi signal. I've not recently upgraded, or changed settings on the phone. An example; my BT Home Hub router sits in my office and casts a strong signal throughout my timber-frame house, (and I know the signal's still fine because my 3-yr-old Macbook, which I use anywhere and everywhere, and spanking new iMac display full WiFi bars and the speed is excellent.) I normally access the web via my iPhone from my living-room, which is no more than 20 Yards from the router, and up until a month or so ago, enjoyed a full reception on the iPhone also, but now nothing. Zilch. (There is one small corner where I can sometimes pick up one bar.)
    I'm composing this message on the iMac, which displays the full WiFi signal, with my iPhone propped up next to it and displaying zero WiFi reception. We are about eight yards away from the router.
    (I realise this topic is closely linked to others already posted, but it's something that Apple should really be responding to; they obviously have people who keep an eye on forums like these to monitor feedback about their products, and connectivity issues seem to be a bit of a hot potato at the moment.)
    My hunch is that the iPhone's capability to receive a WiFi signal has somehow become compromised, being as all other devices - and Apple devices at that - work fine.
    Can somebody help.
    Thx.

    Weak WiFi reception seems to be a suddenly common problem.  We just traveled to Holland last week, and all three of our iPhones were useless, and unable to pick up wifi signals.  We got back to the states, and the problem continues.
    My iPhone must be within a few feet of a wifi router or will see no signals.  I visited an Apple reseller who told me to update my iPhone software to solve the problem.  Now I have NO signal reception unless my phone is at the router... any router.
    Today I went to the Genius Bar, where the Genius reset my phone, and told me I have a hardware problem: my wifi card in my phone is no good, and I have to replace my phone.  I thought this was suspicious at best, turned to the forums, and discovered many, many, many people have the same problem!!! 
    We can't all suddenly have the same hardware problem, but we all can have the same software problem.  This seems to be a well known bug based upon what I've read here.
    I am about to do a total RESTORE on my iPhone to see if it solves the problem.
    I agree with another's comment: Come on, Apple, fess up and fix it.

  • Can anyone tell me or give me a link to the latest response from Apple regarding very real weak wifi signal on what seems to be a batch of both the new ipad and the earlier Ipad2. I have just bought a 2nd hand ipad2 and it has a very weak wifi signal

    Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
    Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
    I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
    So, there we have it. One ipad2 with a very good wifi signal and another ipad2  with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
    As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good  example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
    So, the bottom line now is, of course, firstly,  how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
    Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Airport Extreme (5 Gen) suddenly very weak Wifi signal

    Hello, everyone.  I have a 5th generation Airport Extreme that was working fine until a few days ago.  My power had gone out, and since then I am getting a very weak Wifi signal.  The network still appears and connects on all of my devices.  However, it is dreadfully slow (0.3 MB/s per Speedtest.net), whereas before it was 50 MB/s.  I have tried resetting to factory settings and opening up the option to 5GHz.  The 5 GHz wireless network works just fine on my iMac.  It doesn't show up as an option on my iPhone, though, and that's what's really bugging me.
    I'm wondering if anyone else has had this problem and can help me out.  Of course, my phone support expired a few months ago and now they want $19 for a tech call.  Any help here would be greatly appreciated.
    Thanks!

    Reset to factory again.
    Setup again using all short names, no spaces and pure alphanumeric. If you were doing this make sure you use different names. Empty all the old names from the clients so they start over with fresh clean setup for wifi.
    Use a different name for 5ghz.
    Use fixed channels.. try 1, 6, 11 for 2.4ghz and try 36, and 150 for 5ghz.. around about.. exact channel is not such a big thing for 5ghz.
    Check the link speed and make sure it is full speed if you are in the same room as the AE.
    Test by copying a file on the local lan.. rather than testing to internet which could be a totally unrelated issue.
    Test by using ethernet only on a computer plugged into the AE to see if the internet link has gone slow.

  • Linksys EA6700 very very very weak Wifi signal

    Linksys EA6700 very very very weak Wifi signal
    Anybody faced such issue with this immature router? I was using E4200, the signal was much better. I thought of upgrading to latest “high-end router”, unfortunately it is not an upgrade it is a rip-off. This router is not stable at all.
    I will switch to NetGear, any recommendations?
    Thanks & best regards,

    tangbunna,
    You can try some troubleshooting steps to improve your wifi signal. 
    You may check these links:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=bb3828f4be424fc48c6107d2c9d2e0d1_Tips_about_improv...
    Title: Tips about improving wireless signal
    Article ID: 21868
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
    Title: How to resolve poor or no signal from a wireless router
    Article ID: 3759

  • E1000 weak wifi signal

    Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost. Is there anyway I can adjust the signal strength?
    BTW, the old e1000 didn't have this issue.
    Thanks

    No there is no way to increase the signal strength. Verify the router is on the latest firmware. 

  • Low signals after upgrading TV firmware

    I have a UA40D6600WR with an internal WIFI connectivity, after upgrading the company provided firmware last week i see only one bar of Wi-Fi signal strength in Skype app when calling my contacts, due to this I think the contacts video is not clear, wireless router was placed behind the TV. Do we have any workaround for increasing the signal strength in my TV?. Before upgarding the firmware it was working perfectly allright. If we dont have a solution for this please dont upgrade your TV firmware.

    nothing??

  • After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

    I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
    All wishes everyone...

Maybe you are looking for

  • Can I store an iPhoto library on Time Capsule?

    I would like to store my iPhoto library externally. Can I store it on my Time Capsule or do I need an additional, external hard drive?

  • Will the 24" LCD work on the last version iMac

    Hello, I have a 24" iMac (previous generation) with a mini-DVI. How would I go about connecting it a 24" LCD Apple Display?

  • Need Info about oracle OEM 9i

    Hi, I was comparing OEM with TOAD to know how effective OEM is in performance monitoring.Unfortunately in my laptop I have 10g not 9i.In 10g OEM I found much useful info and want to know about 9i OEM features because my prod is 9i. Can I get webbased

  • Stacked canvas Issues when on the web

    I have a stacked canvas whose Viewport_X_Pos is set to some values other than 0. When the canvas is run on the web, however, the canvas is pushed to the right by same amount to the left cutting the canvas. Is This a bug and if yes, is there any bette

  • Kernel Upgrade on clustered server

    Hi Gurus, Please let me know if there exists any difference in the process in which a kernel upgrade is done on a standalone server and a clustered server. This has to be done on our production server so if any one has steps then pls list out. Thanks