Weak wifi signal

I am recently experiencing a reduction in wifi strength even tho the wifi hub is only a few feet away and hasn't been moved. This is effecting page refresh times and video streaming quality. Other devices are working fine.
Any ideas???

It sounds like its time you consider getting your own internet connection.
Home routers are not intended to broadcast signals across multiple homes.  They are designed to cover around 2000 sq. feet and only 2 floors (current + 1) vertically due to antenna design and power. 
If your neighbor did not design their personal wifi network with you in mind then there is nothing you can do.  All you can do is work with them and see if you can get them to update their networking equipment to benefit your own needs. 

Similar Messages

  • Can anyone tell me or give me a link to the latest response from Apple regarding very real weak wifi signal on what seems to be a batch of both the new ipad and the earlier Ipad2. I have just bought a 2nd hand ipad2 and it has a very weak wifi signal

    Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
    Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
    I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
    So, there we have it. One ipad2 with a very good wifi signal and another ipad2  with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
    As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good  example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
    So, the bottom line now is, of course, firstly,  how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
    Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I have Direct TV with wireless, but a weak wifi signal downstairs. Can I get a Airport (what,kind) that will improve my signal for my Apple TV

    I have Direct TV with wireless, but a weak wifi signal downstairs. Can I get a Airport (what,kind) that will improve my signal so that my Apple TV will work?

    If you have an AirPort Extreme now, an AirPort Express could be added to your network to extend the range of the network.
    See the info about Extend an Existing Wireless Network.........http://www.apple.com/airport-express/
    Install the AirPort Express approximately half way between the AirPort Extreme and the point where the Apple TV will be located. The more that you can eliminate obstructions like walls, a ceiling or heavy furniture in the signal path between the AirPort Extreme, AirPort Express and Apple TV, the better the network will perform.

  • E90 Very weak WiFi signal

    My E90 has a VERY weak WiFi signal, and in places I regularly use a 9500 and my laptop with no problem, my E90 simply will not work e.g. from first floor to ground floor. If I move closer to the Wireless router, then it is fine on both Email and Web.
    So it seems purely that the strength on E90 is far weaker than 9500.
    Has anyone else found this?
    Is there any way to alter signal strength in the various WiFi settings?
    Or is this yet another shortcoming of E90 over 9500?
    Message Edited by beaumec on 09-Aug-2008 01:57 PM

    beaumec wrote:
    Yes I already altered Tx power settings. Thanks for suggestion. Makes no difference.
    It really seems this E90 just has a vastly lower power WiFi rating than my 9500.
    It is very tedious to be unable to connect even within one's own home and frankly renders the phone totally useless, quite apart from all the other problems well documented on here.
    I think I can see why so many are up for sale on Ebay.
    Does anyone at Nokia read these discussion pages and does anyone care that their products seem to fall short in SO MANY aspects?!
    That's right, it seems no one reads these discussion.
    However, if u have ur problem solved, pls advise
    badran

  • Airport Extreme (5 Gen) suddenly very weak Wifi signal

    Hello, everyone.  I have a 5th generation Airport Extreme that was working fine until a few days ago.  My power had gone out, and since then I am getting a very weak Wifi signal.  The network still appears and connects on all of my devices.  However, it is dreadfully slow (0.3 MB/s per Speedtest.net), whereas before it was 50 MB/s.  I have tried resetting to factory settings and opening up the option to 5GHz.  The 5 GHz wireless network works just fine on my iMac.  It doesn't show up as an option on my iPhone, though, and that's what's really bugging me.
    I'm wondering if anyone else has had this problem and can help me out.  Of course, my phone support expired a few months ago and now they want $19 for a tech call.  Any help here would be greatly appreciated.
    Thanks!

    Reset to factory again.
    Setup again using all short names, no spaces and pure alphanumeric. If you were doing this make sure you use different names. Empty all the old names from the clients so they start over with fresh clean setup for wifi.
    Use a different name for 5ghz.
    Use fixed channels.. try 1, 6, 11 for 2.4ghz and try 36, and 150 for 5ghz.. around about.. exact channel is not such a big thing for 5ghz.
    Check the link speed and make sure it is full speed if you are in the same room as the AE.
    Test by copying a file on the local lan.. rather than testing to internet which could be a totally unrelated issue.
    Test by using ethernet only on a computer plugged into the AE to see if the internet link has gone slow.

  • I have an iphone 4 where a very weak wifi signal .. Is it possible solution? .. It ios 5.0.1

    have an iphone 4 where a very weak wifi signal .. Is it possible solution? .. It ios 5.0.1

    Some Users have Reported that a  Restore as New  has helped Resolve issues...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Linksys EA6700 very very very weak Wifi signal

    Linksys EA6700 very very very weak Wifi signal
    Anybody faced such issue with this immature router? I was using E4200, the signal was much better. I thought of upgrading to latest “high-end router”, unfortunately it is not an upgrade it is a rip-off. This router is not stable at all.
    I will switch to NetGear, any recommendations?
    Thanks & best regards,

    tangbunna,
    You can try some troubleshooting steps to improve your wifi signal. 
    You may check these links:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=bb3828f4be424fc48c6107d2c9d2e0d1_Tips_about_improv...
    Title: Tips about improving wireless signal
    Article ID: 21868
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
    Title: How to resolve poor or no signal from a wireless router
    Article ID: 3759

  • Very weak wifi signal after i change the battery

    i recently change my playbook battery. everything seems perfectly okay except that i have a very weak wifi signal reception. i need to be very near the router just to have the signal. i dont know what went  wrong during the changing of battery process but everything is okay except the very weak wifi signal received. please help.

    Looking at the photos in crackberry forum it's the white antenna cable, antenna is top RH corner as you look at the screen. There may be an antenna component inside the back (according to ifixit)  but the cable terminates in a little pcb possibly marked 3G.  Blue cable seems to be BT and grey is GPS. The TI chip supports all three functions, single cable for each. That is why 802.11n is only 65mbps.
    Come back if that's not correct.
    Thanks to crackberry and ifixit if it is.

  • Iphone 3GS very weak wifi signal since 4.3.3 update

    Ever since i update to 4.3.3 (which I'm regretting now) my iphone will not connect to my wifi router unless I'm less than 3 feet from it.
    My wife has a 1st gen IPod touch (which hasn't been updated) can pick up the wifi and connect to the wed with it upto 30 feet from the router, as my iphone used to.
    Is this a 3GS issue as i've read some other posts about a similar problem. I'm not willing to accept this as a hardware problem as the minute before the updating to 4.3.3 my wifi signal strength was prefect, the minute after the update was complete the signal strength was and still is worse than sh*$e.
    I have done all the power down resets as suggested on other posts, but it doesn't work.
    Is there anybody out there that can tell me how to (if possible) to revert back to 4.3.2?????????????????????????????????????
    RLB

    I don't have the answer to this issue but I'm experiencing the exact same problem.
    Since 4.3.3 my wifi signal strength is close to nothing. When I'm 3 feet away from any router, at home or at work, I have 3 bars not even full reception. As soon as I walk a few yards away from the router, I lose the connection completely.
    I've tried everything to fix this. Reset network settings, turning off Bluetooth, disabling location services, full restore, reconfiguring routers, etc. but nothing works. I'm now using the iOS 5 Beta 3 and still no improvement to this issue.
    In this thread there seems to be some recognition from Apple that this is a known problem and indeed a software bug. Hard to know if it's true though:
    https://discussions.apple.com/thread/2815831
    The same weak wifi signal seem to happen to iPad users too: https://discussions.apple.com/thread/2387493 This thread dates back over a year, so it looks as if this problem is common but without fix.
    More threads:
    https://discussions.apple.com/thread/3014400
    https://discussions.apple.com/thread/3096274
    https://discussions.apple.com/thread/2724930
    https://discussions.apple.com/thread/3014267
    Here are my specs, for reference:
    Model
    iPhone 3GS, MC139DN
    Modem Firmware
    05.16.02
    I'll let you know if I find a fix...
    Thanks,
    Kris

  • E1000 weak wifi signal

    Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost. Is there anyway I can adjust the signal strength?
    BTW, the old e1000 didn't have this issue.
    Thanks

    No there is no way to increase the signal strength. Verify the router is on the latest firmware. 

  • My iPad 2 picks up very weak wifi signal, but my iPod touch 5 in the same spot picks up super strong signal. What can I do to change this?

    I have an iPad 2 and am iPod touch 5. Yesterday, my iPad all of the sudden did not want to pick up ANY signal at all in my house. It's like it completely give up on wifi, while my iPod and my laptop works just fine in the same spot. (I have an upstairs bedroom, while the router is downstairs in the kitchen).
    So I have been trying yesterday to get it to work so what I have done is completely wipe the memory clean after I backed it up on iTunes. After resetting it, I restored it. Still nothing. So I tried to take my iPad down nearer to the wifi router, and OMG it picked up the wifi signal! WHUT?!? It didn't yesterday though...
    But now whenever I am up in my bedroom, my iPad would not pick up the wifi at all, or if it did, the wifi would be super duper weak! But two days ago, it was PERFECTLY okay! My iPod and laptop that is sitting right next to the iPad up in my bedroom pick up the signal completely fine.
    Can someone help me? What should I do? Is it problems with my iPad or would it be my router that is the problem?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Iphone 3gs extreme weak wifi signal with wrt160N - suggestions?

    Linksys wrt160N v3.0.00 build 010 Jan 30, 2009
    iphone 3gs firmware v3.1.2
    Set up network to include a few laptops with N cards, a PS3 – all ok
    When it comes out of sleep mode it connects at full signal strength , then within 15 seconds drops to just the one dot
    Under a dLink G router, full signal strength right up to 30 feet outside of the house
    Here in condo just purchased the Linksys and standing right next to it i get a practically non existant wifi signal
    Go back to parents house with g router , works perfectly.
    I thought the N router is set up to be backward compatible and if need be broadcast in G mode for G devices
    Is there anything I should be aware of in the settings.
    I followed the basic setup - no manual fiddeling with any of the settings.

    gv wrote:
    1. You can check all the settings through the web interface at http://192.168.1.1/
    2. As long as your iPhone maintains a connection and does not really slow down it does not matter how many bars the iPhone shows. I think the iPhone has problems calculating the correct signal strength on 802.11n routers. I have seen something similar on a dlink router. My iPhone jumped from 5 to 1 and back. Most of the time it was at 1 bar. Yet, I had perfect connections and normal internet speed. Thus, check internet functions on your iPhone. Unless you loose connections or they get extremely slow I would simply ignore it.
    Problem being is that I'm not sure where to check via the web interface as to what mode it's on right out of the box.
    The only way, recalling from last night's attempts, is if I go in and select the manual settings option rather than the wifi protected button, which would then allow me to enter manual settings.
    Only there, would I know what it would be set at because I would obviously have to set it. I'd rather not go into changing manual settings unless absolutely necessary at this point. 
    As for the iphone not displaying the signal strength correctly - I'd have to say it is, given the following download speed test results: 27, 95 , 28, 149 kbps (not the most spectacular) compared to say 9388 kbps when the iPhone initially comes out of sleep and connects to the network. The signal drops to the one dot within about 10-15 seconds approximately.
    With the old dLink G router, the signal strength registered full and download speed tests supported that, same as outlined above with the weak signal and corresponding d/l results.

  • Weak WiFi signal in my home

    My wireless devices connect well and with a strong WiFi signal when I am near the router but as we go to rooms further away from the router, the signal gets weaker until the point where we have no WiFi.

    Update:
    I ordered, received, and setup a Belkin N300 wifi range extender.  It didn't work well for me.
    An issue seems to be that the input and out wifi channels are the same.  Thus I found that if I was located in some places between the native wifi adapter and the Belkin extender, wifi speeds on either network were extremely slow.  By extremely I mean ~0.15 mb/s as compared to the normal ~30 mb/s I get from that native wifi adapter.  I suspect the slowness was caused by the two wifi signals on the same channel interfering with each other.
    It may be that the signal and speeds may have been better in areas I was trying to cover, our back deck, but I couldn't live with the degradation of performance in other areas of the house.
    I sent the N300 back. 

  • Weak WiFi signal iPhone 3G

    I am on my 3rd iPhone and second 3G phone. I decided to buy a properly imported 3G phone from MTS - one of the main mobile networks and licensed seller of the iPhone in Russia. I received the phone and within minutes of switching it on I noticed that even 2-3 metres from the WiFi box (Airport Express) the WiFi signal became so weak that it dropped the connection.
    I took the new and old phones home and tried both - the old phone (also 16GB 3G but jailbroken) receives a signal and works perfectly with WiFi a long way away from the Airport Express box. The new phone loses the network within 3-4 metres and is useless.
    I tried again in the office, same thing - old phone works great, new one is hopeless.
    I then read a lot on the web and tried everything - resetting the airport express boxes, reinstalling the wireless network, checking all settings, renewing the lease on the iPhone in network settings etc.
    Nothing worked.
    After 2 days I took it back to the MTS shop. They sent it off for 2 weeks. I got it back today with some total BS that it has been caused by some user damage (even the MTS guy with a magnifying glass couldn't see a single scratch or mark on the phone).
    We have now had to file a "claim" from the local Apple office and they will consider this for 1 month!
    I bought this through official suppliers thinking I would have something that worked better and have ended up with a total lemon that MTS (mobile company) don't want to know about and some nameless Apple support person isn't standing behind.
    Anyone else had such issues and does anyone have any ideas before I lose my patience?
    Thanks,
    Roger
    Message was edited by: Roger Wills

    OK, here is the latest on all this.
    Apple locally in Russia say they can’t help as they sold the rights to 3 mobile operators in the country who are fully authorized and have all responsibility for iPhones in Russia. Megafon, Bee-line and MTS.
    My operator, MTS today gave me an official response saying they refuse to return money / give new iPhone as the problem is damage caused by me. This is total nonsense - the phone has had minutes of use only and certainly was not dropped. The problem was evident from the first moment I switched the phone on. They suggest the next step is to have it inspected independently which will cost around $150. However, the 2 authorised independent service agents are Megafon and Beeline (the other 2 operators!!) and they want nothing to do with an MTS phone.
    <Edited by Moderator>
    Can someone reading this who works for Apple help find a sensible solution? My first 2 iPhones I purchased through "grey" channels and they were jailbroken and not official. I decide to buy a new one from an official supplier and get an absolute nightmare situation.
    And for all those reading in the US and other places, these things are **** expensive in Moscow. Mine was RUB 24,000 - at the time around $800.
    I'm so frustrated with Apple on this. Where is their global service and reputation?????
    Roger

  • Satellite L50-B-1N8 - weak wifi signal

    Hi,
    So two weeks ago I purchased a new Toshiba Satellite L50-B-1N8 laptop from Argos.
    It has never had too good a wifi signal strength (never full bars - even when sat next to the wifi router) but I figured that was due to my wifi box and maybe also the rubbish weather we've been having.
    However I still have my old laptop, and when checking the wifi signal side by side, my old Samsug Laptop was picking up full or almost full signal whilst this new Toshiba was picking up one bar at a push.
    I have since taken the laptop to my parents and it struggles to get good wifi signal, if any signal there also.
    This is super frustrating as it will pick up wifi, it will just pick up a very weak signal or none at all and as soon as I move my laptop .. literally a couple of centimetres, it will change wifi signal or my wifi signal will cut out and it will be unable to connect.
    I have done everything possible that I can think of, from troubleshooting to actually factory resetting my laptop, none of which has worked so far. The factory reset seems to have actually made it worse rather than better!
    Like I say, my router is not the problem here, I have my old laptop that connects fine, along with two other laptops and mobile devices that all have connected to the wifi fine and with full signal!
    I have turned all these devices off from wifi to see if that's the problem, but that did not help either. I also have a wifi booster in the house, so all the devices have full or very nearly full signal, but that seems no help to this Toshiba.
    I am losing my tether, is there anything else I can do? I am still in the Argos 30 day guarantee if the laptop is faulty, but I just cannot think of anything else to try. I just hope that if the Laptop is faulty that Argos will help and either refund the laptop or exchange.
    Any help or advice would be much appreciated. :)

    I think first of all you should check if the wireless performance issue isnt related to the power saving settings.
    Go to control panel ? Windows power options.
    Choose the current power plan
    Now you should click on Advanced Power Settings.
    Within Advanced Power settings you will find different options, Search for Wireless LAN (WiFi) and choose Performance for both options (battery and Main power)
    After that reboot the unit.
    Hopefully this short change would help you.

  • TS1398 Weak wifi signal in mypad

    Weak signal in my iPad

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • How to input/output a digital signal and acquire an analog signal at the same time?

    Dasylab, version: 8.0.04 Acquirement Card: PCI1002L When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs, and when I use DasyLab to input or output a digital signal is no problem also, but when I do that a

  • Intercepting editing start and stop/cancel in a JTable

    Hi, I've been seaching the forum for days but could not find anything that solved my problem. Problem: I'm writing a multiclient server. The data of the server is displayed in a JTable. The rows(cells) in the table is editable and to make sure no two

  • Can No Longer Burn To External Drive

    About two years ago my then six-year-old 800 mhz flat panel iMac's SuperDrive started acting erratic. Rather than replace the internal drive I purchased an external LaCie firewire drive. I was able to both read and write from this drive. I am not pos

  • Sluggish performance in EM for soa11g PS2

    I noticed recently on our SOA11g (PS2) environments that after we install AIA FP11gR1, with all the composites active, the performance in Enterprise Manager become unbearable slow. I have to shutdown unneeded composites to get the performance back. I

  • Adobe continually wants to reupdate Media Encoder 4.2 over and over..

    Adobe Updater on my iMac running Snow Leopard, weekly (automatic check for updates to my Suite of Adobe Procucts) wants to keep re-update Media Encoder 4.2. I did it a long time agao but keep getting the message to install the 100 Mbyte file Encoder