Wear and tear - durability

I know the MBP and PB are very durable units, and unlike the MB, they dont discolor or get grease marks. I recently was in class today and the person next to me had a MBP and i noticed that on the palm rests there were several scratches - possibly from a watch or something? And on the bottom corner of the display, there was a crack. I did not speak to this person - so i dont know how any of it happened or how well they keep their machine. Someone had mentioned to me that they dent due to the casing? any input on to the apperance of yours? I plan to take care of it and not drop it or scuff it up, but want to know just how much it can handle. I dont want to ruin a 3k machine!

I managed to keep my Powerbook looking spiffy for 3 years, apart from the pitting issue which I suffered from ( if your PH is slightly acidic - do a search for it...it creates black pits where your hand rests, quite unpleasant looking). I invested in a very good sleeve which it was never stored or packed without and never wore a watch or jewellery that would scratch it.
With my MacBook Pro, I've invested in a Marware cover for the area where my hand rests so the same pitting doesn't happen again.

Similar Messages

  • Mini-DVI port not working: wear and tear?

    I had been happily using the mini-DVI port to play content on TV, using a DVI to Video adapter : plugging and unplugging probably twice a week.
    Now it seems to have stopped, abruptly: no signal at all is reaching the TV. (Adapter still works fine on my MacBook.)
    What are the chances of wear and tear damaging the DVI port? Is this a complicated fix? Any other thoughts? No recent upgrades or updates.
    "About this Mac" reckons it's mirroring fine, so it feels like a hardware thing. Many thanks in advance.

    Hello ewfelton
    It is very possible that the DVI port on the iMac has been damaged from wear and tear, as it's harder to get at than the MacBook.
    I would disconnect everything from the iMac, grab a clean towel and turn it face down on the desk. Then with a magnifying glass and light inspect the DVI port for a broken or bent pin. In the process of inspecting the port your SMC will also be reset, follow the instruction for "How to reset the System Management Controller" when your done.
    If the port seems OK and the SMC reset doesn't get it going use Disk Utility to Repair Disk Premissions and try it again.
    Your local Apple Store or local Apple Service Provider can replace a bad or damaged DVI port.
    Dennis

  • Mini DVI Broken (Wear and Tear?)

    I've been pushing my mid-2007 Mac around for a while and I think its startting to sputter out. Whereas I have other computers I'd like to make my Mac run as long as possible before it goes kaput completely. For instance, its monitor screen is completely broken and unusable. To keep it going, I've been attaching it through a Apple Mini DVI to VGA Adapter to a AOC 23" LCD screen for a while. This has been a suitable replacement until recently. I plug in the adapter, the screen powers up normally, working perfectly for about a second, the computer eminates a high pitched ringing noise, and then the screen goes out as if unconnected unable to read the adapter at all. I'm near certain this problem is with the computer's Mini DVI port and not the adapter or screen. I've tried two adapters and connected the screen to other things. Same problem with other adapters and the screen works with other things. Can it be fixed? Overly costly? Is it possible that the problem is something else? I have literally no screen here so I have only the hardware availible to me at the moment, making things difficult.

    Hello ewfelton
    It is very possible that the DVI port on the iMac has been damaged from wear and tear, as it's harder to get at than the MacBook.
    I would disconnect everything from the iMac, grab a clean towel and turn it face down on the desk. Then with a magnifying glass and light inspect the DVI port for a broken or bent pin. In the process of inspecting the port your SMC will also be reset, follow the instruction for "How to reset the System Management Controller" when your done.
    If the port seems OK and the SMC reset doesn't get it going use Disk Utility to Repair Disk Premissions and try it again.
    Your local Apple Store or local Apple Service Provider can replace a bad or damaged DVI port.
    Dennis

  • My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

    My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

    downgrading is not supported by Apple and doing so has the potential to brick your device. so, you can't. if you have feed back for the new iOS you can provide that here: http://www.apple.com/feedback/

  • Is there an on-screen touch feature that can be purchased to save wear and tear on the home/escape button?

    Is there an on-screen touch feature for iPad 2 that will save wear and tear on the home/escape button?  If so, what's it called and where can I buy it?

    And if you are running iOS 5, you can enable Multitasking Gestures in the General settings. This enables you to quit out of an app by just pinching with four or five fingers. That saves a lot of use of the Home button.
    Regards.
    Message was edited by: Dave Sawyer - sorry, Meg, didn't mean to be redundant.

  • What is normal does wear and tear look like on a mac book charger

    My childs school is charging us $80 to replace her charger that stopped working and stated it was her fault it stopped working.  It was a bit frayed at the top but that's it.   The charger was 2 years old when she received it. 

    have a picture?
    80% of wear and tear you cant see ,which is twisting the cable up on the charger and bending it over and over and ruining the copper feeds running thru the rubber coating over the PVC coated sheaths of the copper wire
    So, looking at it often doesnt tell a whole lot.
    if the wires under the rubber look very coiled and twisted, that would be abuse

  • Bootcamp rebooting...wear and tear

    Hi all,
    I'm now 2 weeks into my new macbook pro (i am a PC switcher), and still lovin it. I just wanted to get people's opinions on something.
    I have installed XP using bootcamp for the sole purpose of playing a few games and using 1 online app that requires IE. Other than that, I'm strictly OS X Leopard.
    What are your opinions of the wear and tear on the computer from having to reboot from one OS to another constantly. Constantly being like once a day or once every 2 days. My profession is in electronics, more specifically single board computers used in wireless telecom infrastructure. So i am fairly knowledgeable in this area. I know that "soft" boots are no big deal. As no power is removed from the board. It's just a reset signal to every part on the board. However the stuff i work on doesn't have a harddrive or any mechanical parts like a "computer" does.
    Everytime you reboot the harddrive stops spinning and then restarts along with the optical drive possibly right?
    So chime in please. What's your opinion?

    If it were a problem, Apple would have never made Boot Camp.
    It is not a problem at all.
    I have been doing it for months without any issues.

  • HP bf69wm Wear and Tear question.

    Hello, I own an HP bf69wm. It seems to have a lot of wear and tear next to and on the mouse pad. it seams to be paint peeling off, but I am not sure. Is there a way I can replace this part and/or any paint I can use to fix this
    issue?
    thank you!      
    This question was solved.
    View Solution.

    Hello tommyflores72,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that due to wear your top cover for your HP 2000-bf69WM Notebook PC. You can actually order the top cover from the HP Parts Store. The HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance and Service Guide will provide you with the part numbers to the color of cover you want and provides you with help in replacing it.
    I hope I have answered your question to your satisfaction. Thank you for posting your question here on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Define wear and tear

    Hi
    After looking at the warrany for my iphone it states the warranty does not cover wear and tear..... can someone please define wear and tear?

    Andodising rubbing off small cosmetic marks from every day use. Usual wear and tear for a phone like tiny scratched on glass etc.

  • Screensaver wear and tear

    Yes sorry i know this is my second screensaver post today.
    I love screensavers, I think they are great to look at. But, do you all think it causes undue wear and tear on the computer running a graphically advanced screensaver as opposed to one that just shows pictures? I'm currently using Fenetres Volantes (http://objective-cocoa.org/fenetresvolantes/en/index_en.html) which I definitely recommend you all check out. But sometimes when it is running I hear the fans speed up. What do you all think?
    Brett

    No big deal, it's just using more processor power and it gets warm. Not to worry.

  • Wear and tear

    hi
    is there any function module to calculate wear and tear for particular asset?

    Hi,
    this is one of the central functions in the Fixed Asset module ... depreciation calculation. Please regard the SAP Help Portal, there is lots of documentation on this issue.
    To your question: yes, there is of course a function to calculate depreciation, but I would recommend to first try standard reporting as well as standard functions to calculate/display depreciation.
    Regards,
    Markus

  • Wear and tear around where the screen is connected to the body

    I have a mac book pro,, and recently I noticed some wear and tear in the area where the screen is connected to the body,, represented by discoloration in the material on both sides at the exact location where the screen plastic connects inside the almunim body. I was wondering whether I should be worried,, and if it is something to worry about would my appeal care cover it?

    If it is just at the bottom of the screen surround on the rubber part, I would not be concerend. You can remove it with a damp Qtip, turn your MBP off and be gentle and you can get the dirt off.  If you have concerns, take to Apple you have Applecare.

  • WILL USE MY COMPUTER EVERYDAY CAUSE A FASTER WEAR AND TEAR?

    Hello, i have a MBP and use it a lot everyday. I work at home with my blog site but also take my laptop to work to use it during lunch. I use it a lot everyday. Like i have heard some everyday used PC's wear out the DVD/CD drive and the mouse pad becomes unresponsibe due to time and useage. I heard many original macbook pro's having dead pixels.  

    Yes, using the machine more will wear it out.
    1: The keyboard is weak bubble membrane like technology, use a external USB "clicky clack" DAS Mac Keyboard with it's 6 foot cord for most of your typing.
    2: Although Apple is trying to get rid of it, the cheap two button scroll wheel mouse is still supreme compared to trackpads which do wear out.
    3: The case can get scratched by jewelry and chemical reactions with your body
    4: The Ethenet port can get worn out fast, use Wifi. The USB ports usually last, unless you abuse them.
    5: Open/close the lid from the center.
    6: Cover the keyboard area, but allow air underneath, to prevent spills and dirt/dust from getting inside.
    7: Use the optical drive sparringly, not for DVD playback or large burnings, use a external optical drive or send it out to cd/dvd duplication service.
    8: Use a MacTruck or heavily padded case.
    9: The power cable can get worn, keep it off the floor.
    10: Use screensaver, display sleep etc to prevent the screen from wearing out prematurely.
    My 1.75 year old machine still looks and smells like brand new, but a MBP with daily use will last about 4-5 years, less with abuse.
    However if you use the onboard keyboard and tpye everyday, it will start to look sorry in about 3+ years, just when your AppleCare expires and Apple will doom your machine to forever slowness with a bloated OS X upgrade or two.

  • Trackpad wear and tear?

    My macbook is in use almost 40-50% of the day. I work the most with Illustrator, Logic, Garageband, Word, Safari, iChat, iTunes.. I really go to town with this laptop.
    I'm starting to notice some wear in the center of my trackpad, it's a whole lot shinier than it used to be.. and it's got a lot more traction (not as smooth anymore) than the edges.
    Do your guys' trackpads look/feel worn? Is this normal? I've had my macbook for about 6 or 7 months now.
    Thanks very much

    It is effects of grease caused by the friction between your finger and trackpad. Better using a mouse. If u prefer to use trackpad, try some protection shield.
    http://search.ebay.com/search/search.dll?cgiurl=http%3A%2F%2Fcgi.ebay.com%2Fws%2 F&fkr=1&from=R8&satitle=macbookpalmrestprotection&category0=&submitSearch=Search

  • Wear and tear on S10e touchpad - Is a replacemen​t available anywhere?

    Hi Guys,
    I've been following several threads here but never felt the need to contribute (shy lol) but I have noticed that the touchpad on me beloved S10e is becoming "shiney". All laptops suffer from this but the rate at which my S10e is wearing is becoming a concern! Maybe I'm just too fussy - with my workhorse T42  I've gone through 2 new keyboards and a new touch pad!
    I've removed the front lower panel and seeing as it's one piece I was wondering if there are replacements available for the user to replace?
    Thanks,

    Hi,
    my S10e touchpad gets more and more shiny since 4 month of nearly daily use... not often use the touchpad because i use at home a mice instead the touchpad...never the less it becomes shiny ...
    i think the only way to get a new palmrest within includes the touchpad is from the lenovo customer service...
    but i am waiting a bit more to get a new one in under warranty service... ...
    because it is not a normal abrasive  ... i think...
    regards KalvinKlein 
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Maybe you are looking for