Weather bug clock did not update to daylight savings

The weather bug clock did not go to daylight savings time. My Samsung fascinate is new and I checked for updates and there are none.

My clock was an hour ahead for my home city. I opened Weather bug. Then went to Menu and selected "My city list". I deleted my home city and any other cities. Your homepage will show no city. Then I selected "Select city" on the menu, typed in an found my city again and selected it.Now the time is correct. Finally.

Similar Messages

WRT54G did not update to daylight savings time

The WRT54G is hardware v1.1, firmware v4.30.5
On the basic set up page, I have checked the "Automatically adjust clock for daylight savings time chages", however, it did not update the clock for daylight savings time this weekend. This has caused numerous outages due to the Access Restrictions that are defined.
What do I need to do to have the router update its clock for daylight savings time

You shouldn't have to do anything, but since it doesn't work... hard reset the router by pressing the reset button in back and reconfigure the router from scratch. See if that works and gets the correct time from your ISP.

MY phones time did not update with daylights savings. How can I update?

The time didn't change on my phone with daylight savings. I tried *228 and that didn't fix it. Any other ideas?

mine DID change. the problem is that i live in AZ and we don't change our clocks. i turned it off and back on and it was back to local time (i didn't have to remove the sim)

ColdFusion did not adjust for Daylight Savings Time change

Both my 8 and 11 machines did not adjust for DST over the weekend. The computer times look ok, but CF times are still an hour behind. We've restarted the server, which did not fix the problem. Any suggestions?
Thanks!

Do you have ALL CF Server updates/hotfixes applied? I don't _know_ that any CF updates included the new rules for DST changing; but that's the first thing I'd check, if it were my system.
What web server are you using? Built-in, Apache, IIS? Could there be a setting in there that might affect the DST difference?
Just off the top of my head.
^_^

My laptop iCloud calendar did not adjust to daylight savings time. Do I need to manually move all the appointments are is there somewher I can do this. All I found was the time zone adjustmant and that didn't help

when daylight saving time started last Sunday, my iCloud appointments on my laptop moved up one hour to 9 a.m. They're supposed to be at 10 a.m. which is what's showing on my iPhone. Is there an adjustment for this somewhere? I tried the time zone adjustment, nothing there was helpful.

Please please help me, if you know how.

Solaris 10 u8 system did not update daylight savings time

I am running Solaris 10 u8 x86, and my system did not update for the daylight savings time change on Nov. 1, 2009. I am in the US/Mountain time zone. What should I do?
Patch 141517-04 is installed, I assume it came with u8.
Does this have something to with JAVA Time Zone updater? I saw this:
http://java.sun.com/javase/timezones/tzdata_versions.html
Shouldn't u8 take care of all this automatically? Do I have to somehow get TZUT 1.3.20? By contacting support? What?
Any suggestions would be greatly appreciated.

BTW, I'm running 64-bit Solaris as a VirtualBox (3.0.10) guest VM on a 32-bit WinXP host.

My computer did not update to 5.1 App store thinks it did??

The app store says my Pages is 5.1. This is not the case. I have older version on Mac. It did not update but says its installed. Im stuck!

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Open quantity in Sales Order did not update after cancelling Reserve Invoice

Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
Thanks in advance.

Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
SO Quantity: 100
Open Quantity: 40
Reserve Invoice 1: 60
Reserve Invoice 2: 40
SO closes before they can make Reserve Invoice 2

Excise Invoice (J1IIN) Cancelltion did not update RG23A Part-II

Hi, Dear's
I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
BUT did not update RG23A Part-II register
Thanks
SR

Hi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu

Excise Invoice Cancellation did not update RG23A Part-II Register ?

Hi, Dear's
I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
BUT did not update RG23A Part-II register
Thanks
SR

HI
As far as i know there is no part 1 or part 2 for RG1 register.
regards
Prashanth

When the 5.0 version came out a notice was sent to my laptop stating it was not compatable with Garman GPS updates at this time. I would like to know if that has been fixed allowing Garman GPS updates now? I did not update to 5.0 for that reason.

I did not update to 5.0 Firefox because it said it was not compatable with the Garman GPS updates at this time

I did not update to 5.0 Firefox because it said it was not compatable with the Garman GPS updates at this time

ERROR IN FILE--XI--RFC SCENARIO. BAPI did not UPDATE the DATABASE TABLE

Hi
I have created a scenario FILE -XI- RFC
File is picked by file adapter - Its working fine
I have used BPM
In RFC side i used BAPI_INCOMINGINVOICE_CREATE
Its working fine and return an Invoice Number and Fisical year .
When i Check this in the R/3 System , in Invoice no Does not Exist .
Message mapping is ok
SXMB_MONI all are ok
Receiver file i got the invoice no and fisical year .
The Problem is " DATABASE TABLE DID NOT UPDATED "
So should i do BAPI_COMMIT seperately ........
Any solution ................
VERY VERY URGENT .....
thanks in advance
B.Jude

hi jude,
Commit Control for Single BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
<b>In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.</b>
Regards,
Mandeep Virk

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

I did not update in time, now I have problems and I cannot seem to update ical.

I did not update in time, now I have problems and I cannot seem to update ical. Can someone help guide me?

Apple said to update ical. I guess I waited too long because my calendars and all my events disappeared. I tried syncing with my iPhone and it deleted my calendars off my iPhone. Double clicking on a calendar invite does not work either, it won't open or populate my ical. I requested an update through Mobileme to get ical working again and nothing..... It does not appear to want to update or start working again. Is this an issue with Apple ical in general?

Lion install did not update background/screen saver images

I installed of Lion on my Macbook and it did not update the background/screen saver images with the new ones, anyone know why?

Check your Macintosh HD/Applications/ folder for a program called "Install OS X Mountain Lion" and then open this to run the installer.

Weather bug clock did not update to daylight savings

Similar Messages

Maybe you are looking for