Weather widget - How to connect to cities

Some weeks ago my beloved Weather Widget suddenly went dead. I tried other widgets but the result is the same: They cannot connect to the list of cities in some database which supplies them with the weather information.
How did it happen? And how can I reestablish the connection.

Hi,
Thanks a lot for your information,
I have gone through the links and also installed the SAP Widget Foundation. Created a Identity and service provider, when try to test the connection, the following error it shows,
HTTP ERROR: 500
Could not initialize class com.sap.mw.jco.JCORequestURI=/SapMiddleTier/app/advanced/service_providers/instance/check_status
Caused by:
java.lang.NoClassDefFoundError: Could not initialize class com.sap.mw.jco.JCO
Can you please guide us.
Thanks...

Similar Messages

Weather widget is stuck on "Add cities"

Really dumb question here... I am new to smartphones.
Somehow I accidentally hit the weather thing, and it went to "add cities". I cannot get it to go back to just showing the temperature.
How do I exit or cancel this? When I touch it, it just goes into the setup screen, and when I exit that, it still says "add cities" instead of the temp.
Is there an "escape" key on this thing?

It sounds like you at one time enabled the Dashboard "dev" mode which allows widgets to stay on the desktop - even between restarts. Otherwise, the widget would "pop back" when Dashboard was shown.
The solution is to pick up the widget and drag it, and while your mouse button is down and you're dragging the widget, press your F12 key to call up Dashboard. Once Dashboard is visible, let go of your mouse button and "drop" the widget back into Dashboard. This is probably similar to how you got the widget onto the desktop in the first place.
Oh, and Amnesty won't help you because it doesn't actually interact with Dashboard widgets (it's a completely separate and distinct widget environment), which explains why it can offer features (like widget rotation and scaling) that aren't available in Dashboard.

The Weather widget does not find cities anymore

Some time ago my weather widget lost its connection. If I try to enter a city name it just says No city found.
I reckon that the connection to Yahoo's city list is lost.
On my other computer it works fine.
Can anyone tell me where I can restore the connention?

@Fedorov19
Excellent
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How do I get the weather widget back?

One day I had used my iPhone and I guess the automatic lock didn't go off yet, and an app was deleted. Turns out it was the Weather Widget that had disappeared. How do I get it back?

lmao read that again and saw you meant the app.
follow what ckuan said it should fix it if not then you may have a restriction on it.

How do I change the weather widget location from Cupertino to my location?

How do I change the weather widget from Cupertino to my location?

Clcik on the little "i" icon in the widget.

How can I delete cities from my weather app?

How can I delete cities from my weather app?

1. After launching the weather app in iOS 7, click on the list view icon in the bottom right connerto bring up the city list view.
2. Then, select the city you want to delete.
3. Next, swipe left on the selection, then click on the delete button that appears.
same steps have been explained in detail with screen shots in this article ..... http://nyacomputing.com/how-to-delete-a-city-in-weather-app-in-ios-7/

How do you get the weather widget in notification back on line

My yahoo weather widget in notification shows as offline. What needs to be done to get it back online?

Is your Settings > Location Services > Weather ON?
From my previous post, don't use the Notification Center but the Weather app directly to switch Local Weather to ON. (See above post)

Updated to 10.4.9 and now weather widget doesn't work-what to do?

Hello-
Just updated to 10.4.9 tonight and for the first time since I bought this computer in August, the weather widget doesn't work.
Would anyone happen to know what I could do to get this to work. I am connected to the internet, I can access the accuweather.com that I think this widget connects to, I restarted and reset PRAM (not even sure if that has anything to do with it).
I just don't even know where to go from here to troubleshoot. Any suggestions would be appreciated... Thanks.

Just for the record... There is quite a bit of discussion about widgets. I only use the dictionary and iStat. I use WeatherPop in the taskbar, which resides in the taskbar...
It did it again this morning. I let it boot all the way, and then I went into system preferences to find the resolution that the display was using. It was 1400x1050. But there was a second display preferences window open. Basically... The computer was "mirroring" to a second non-existent monitor. I ran through the "detect displays" and it got rid of the second setting.
I've never had a second monitor hooked to the machine, and I've never messed with the display settings, other than to change wallpaper. I'm not sure how or why it turned on, but I think it's off now... Weird that it only did it every now and then.
Steve

Weather widget - location

On my yoga 2 10 tablet I would like two weather widgets. One for my current location and the other for the city where my daughter lives. How do I prevent widget two from defaulting to my current location?

I actually somehow broke it on my lenovo phone, but i think that i have 2 different lenovo weather widgets, and i can use them separatelly with different cities, but i don't know how i did that. One more stupid thing about lenovo weather widget is that you can't change the weather provider, as accuweather is not very accurate. I'll check how i did that if you like to use exactly the lenovo widget.
Spoiler (Highlight to read)
Lenovo G550 + Lenovo S930 + Lenovo Yoga Tablet 2 - 10"

Weather widget not working well

Hi,
This morning I found that my weather widget didn't update to the latest weather - still on Saturday.
The internet connection was good. I live in York, England, and since it didn't work, I tested with other cities, like London or Leeds, it worked fine. But when I tried to change it back to York, the city didn't change: it remained at the last one I checked.
I tried to refresh it, and then it's all blank...
I am hoping it's the problem of the network, but can anyone please test it for me and let me know whether York, England (United Kindom) works for you or not, please? Thank you so much.

It seemed to be a temporary problem and it's working now.

In ios 5 my weather widget isn't working!

I have iPhone 4. Yesterday, I updated my phone to iOS 5, but I noticed that my weather widget is not working. It can not be upgraded. I tried every way but I could not fix it. Is there anyone who has the same problem or am I the only one? How can I fix this problem?

If you are having Issues with downloading iOS 5....
Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

My weather widget keeps saying "weather offline" when im on wifi or have full service?

on my iphone 4 in the notification centre, my weather widget says "weather offline" sometimes, most of the time is shows the weather, but sometimes it is offline even when im on wifi or have full service. its so annoying. how can i fix this?

I'm seeing it too, and I know of no fix. So it's not just you. And, I'm in the US so it's not a problem in your country only.
I have found no pattern as to why I get "Weather Offline" but other times it's updated just fine.
Sometimes the Weather app refuses to update the local weather, other times it gets updated. I assume the issues are related. All the other weather locations I create in the app are updated, so I know it's not the weather server that's the problem. It's just the local weather in the app and notification center (or centre!)
Guess it's another iOS 5 bug. Let's hope it gets fixed in the next release.

Weather widget not working after upgrade to Snow Leopard (Australian areas)

The weather widget is not working since I upgraded to Snow Leopard.
The feed seems to have changed from Accuraweather or something like that to Yahoo!Weather, and Yahoo!Weather seems to have problems (at least concerning weather data feeds from places in Australia).
I live in Kempsey, New South Wales (Australia). I can't input that address, because it won't validate. When I try typing my address in the widget autocompletes with "Kempsey, Austral Eden, New South Wales (Australia)" (FYI, Austral Eden is a rural parish near Kempsey, but Austral Eden is not in Kempsey and Kempsey is not in Austral Eden). That address will validate, but there seems to be no weather feed: ie. I don't get any information displayed in the widget.
The nearest address that will validate correctly is "Port Macquarie, New South Wales (Australia)". The Yahoo!Weather feed doesn't provide any information about that, either.
I can get a weather data feed for Canberra. But Canberra is 800 kilometres from here.
I think I want to change back to AccuraWeather. How would I do that?

I'm annoyed by this as well.
I was planning on buying my father the Snow Leopard upgrade for Christmas, but there is no way he'll want it without a working Port Macquarie weather widget. ( I'm not kidding! )
I've looked at the AccuWeather widget as well, but it is really ugly!

Weather widget text moved UP

I noticed recently but only really investigated today. The text on my weather widget has all moved up about 5-10 pixels from where it should be. The temperature listing is now sticking about 5 pixels outside and above the background. It looks like the same font and I haven't gotten rid of any fonts lately. I don't know if this is related to 10.4.5 but I noticed it around the time of the upgrade. Any ideas for troubleshooting? Very strange issue.

Yes i have logged out, restarted, refreshed the widget. It's not just the weather widget now. I see that the address book widget is different, my iCal calendar widget has its text moved up, and goodness knows which others. I orignally asked this question on another forum and others reported having the same problems. I wonder if copying the widget from a computer not experiencing this would make a difference. It's really just the text.
You know how when the weather widget is loading the temperature has the - - where the numbers are about to appear... those are in the correct position. As soon as the numbers and other text loads it's significantly higher than those - - would suggest.

How to connect serial or usb or parallel port

telll me how to connect our application with serial port and how to detect weather the usb is connected or not

Without spending too much time looking at the documentation, from using previous similar transducers, the primary two connections you are concerned with are the "+output" and the "ground". The other connections are also important, but aren't directly the concern of the Data Acquisition Hardware. The "+output" produces a variable dc voltage relative to the "ground" input that is a product of the applied pressure, with the maximum output voltage, as shown on the chart, indicating maximum pressure. So you would connect those, through a suitably shielded, moderately short length, wire to the "DAQ" analog input. You will also have to supply the transducer with it's required + supply voltage at pin 2 "vs", and the power supplie's negative to the ground. There are whitepapers on this NI site about connecting to data acquistion hardware and I strongly suggest reading them a couple of times as well as anything online you can find. Writing the DAQ software, in LabVIEW or whatever, can be trivial compared to making the correct, low noise, connections to sensor hardware.
I didn't read how the offset adjustment signal is produced or its use, figure it is designed to allow you to "tune out" some signal offset caused by differences between sensors of a type (they will not all have the same "fullscale output" as indicated in the chart).
As you proceed, please keep asking.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Weather widget - How to connect to cities

Similar Messages

Maybe you are looking for