Web access question:

I can access Apple.com, Google Search and sites that I have to log into; but I cannot enter a Bookmark, enter a typed in URL or click on a link in Google Search and go to it. I have 4 browsers and they all have the same issue.
Help!!
OSX 10.9.3
Safari, Google Chrome, Firefox, Opera all have the same issue.
No parental restrictions.

Similar Messages

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Question about "Get Web Drawing URL and Page Name From" for Visio Web Access

I am trying to get both the web drawing URL and the page name from a list through Share Point Designer 2013, but it doesn´t work.
It looks fine when a do the web part connection wizard. I select from which columns to get the URL and the page name. But on the final web part page nothing happens. It just shows the URL that is selected in the Visio Web Access Web part. I had hoped that
that value should be overrided by the SPD-settings.
I have googled for hours..

Hello,
I have now saved the Visio-file in .vdw-format, but it says Visio 2010 Web Drawing (*.vdw). Is there a .vdw-format for 2013? Isn´t that the .vsdx-format?
Still doesn´t work with the .vdw-format, but maybe I am doing something wrong.
Any ideas?

Excel web access web part Refresh

Dear All,
Please let me adress my SharePoint issues to you.
Current situation:
I currently have an excel file stored in one of my sharepoint libraries.
The excel file has two tabs.
The first tab contains data exported from a sharepoint list (with data connection)
The second tab has a customized table based on the first tab.
I created a page and added a Excel Web Access web part. The above mentioned excel file (tab2) is viewed in this web part.
Problem:
Everytime I change something in my sharepoint list, the changes will not be viewed in the web part. The changes will only view when I open the excel file in the library first, and then save it.
Question:
Is there a way I can refresh the data automatically, or manually without having to leave the page of the web part?
If anyone has a solution please let me know, thank you for your help!
Bob

you can configure automatic data refresh. fairly simple. this article is for SQL data source, but the same process applies across the board.
http://technet.microsoft.com/en-us/library/hh525341(v=office.15).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Unable to export data from Web Access Data Sheet in Sharepoint to local excel or access file

Greetings and good morning.
I'm going to start off in broad terms with this question because I'm not 100 percent sure what information to provide.
Long story short, we've got a Web Access Data Sheet list hosted in a Sharepoint 2010 environment. It is accessed and used by multiple people throughout the day. It contains several thousand line item entries. I'd call it a large data sheet.
I think the size of the data sheet is casuign some instability in the list. I'd like to be able to export a defined range of data from the list into a local excel or access file. After that, I'd delete the stuff on the Access list to improve performance.
But...when I attempt to use the Sharepoint Action bar to export - Excel locks up/crashes. If I try to export to Access, I get a similar issue.
Any ideas? Could anyone begin by telling me what other information is required?

Hi,
If you would like to export data from Access Web Database in SharePoint 2010, you could go to Design With Access page in Settings. The url in my environment is http://sp/tt/_layouts/accsrv/ModifyApplication.aspx . Then choose the Table and export it to Excel
or Modify it in Access.
Regards,
Rebecca Tu
TechNet Community Support

Force Day View of Calendar Published from Outlook Web Access

Is there a way to force the view of the Outlook calendar published through Outlook Web Access 2013 so that it displays the day or week view without the user having to click on an icon to change the view? I want to display a day view calendar (or week
view) by default. I can successfully publish the calendar but a user has to click the icons to change the view. I want to display the calendar in an iframe on a digital sign and the user won't have a way to click or touch the icon. Are there
parameters that can be passed in the url?

Hello Brian,
I'd suggest asking OWA specific questions on the
Exchange Server for Developers forum instead. Also you may find the
Exchange Server 2010 Outlook Web App Customization SDK helpful.
As for Microsoft Office Outlook you can use the
CurrentView property of the Explorer or Folder classes which returns a View object
representing the current view. To obtain a View object for the view of the current Explorer,
use Explorer.CurrentView instead
of the CurrentView property of the currentFolder object
returned by Explorer.CurrentFolder.
The View object allows you to create customizable views that allow you to better sort, group and ultimately view data of all different types. There are a variety of different view types that provide
the flexibility needed to create and maintain your important data.
The table view type (olTableView) allows you to view data in a simple field-based table.
The Calendar view type (olCalendarView) allows you to view data in a calendar format.
The card view type (olCardView) allows you to view data in a series of cards. Each card displays the information contained by the item and can be sorted.
The icon view type (olIconView) allows you to view data as icons, similar to a Windows folder or explorer.
The timeline view type (olTimelineView) allows you to view data as it is received in a customizable linear time line.
Views are defined and customized using the View object's XML property.
The XML property allows you to create and set a customized XML schema that defines the various features of a view.

Making changes to web access phone setting CUCM 8.6.2

Hello,
I have a question on a change I need to make on our Call Manager. We use the Berbee Informacast product for emergency notification. It requires that the Web Access parameter be enabled on the individual phones in order to send audio broadcasts. I have learned that after a certain version of CUCM (8.6 perhaps) this setting was set to disable by default on the Enterprise Phone Configuration section on CUCM. We have had this version running about a year now and many many phones have been installed since then. These phones have the web access disabled I believe because of this being disabled on the server settings side. My question is this...
Would it be better to go into System > Enterprise Phone Configuration>Web Access setting and set to enable
or
Do a bulk edit on all phones to enable, reset phones.
What I am not sure about also is if I change on the system side if it will automatically update and reset phones.
Just not clear on the right path to take on this...
Any ideas?
Thanks,
-Nick

Thanks for the great info. This is what I did.
Changed web access to enabled in Enterprise Phone Configuration. Clicked Ok, manually rebooted a couple of phones with no web access. Still didn't work.
Changed web access to enabled in Device>Device Settings>Common Phone Profile>Standard Common Phone Profile. Clicked Save and rebooted the same two phones. Worked great.
Ran job scheduler to reboot all phones (1600 of them) and all seems to be good now.
Thanks again Chris!

Excel web access: Parameters in external data sources not supported???

I have a SharePoint 2013 site with Excel services.
The site itself has a Current User Filter Web Part which gives filter value [userID] to a Excel web access -web part.
In the Excel itself I have a named area(UserIDfromSharePoint) defined as a parameter.
This parameter is being used in a Microsoft Query into an SQL database table:
Select * from [MyTable] where UserID = ?
The question mark is set as a parameter to the named area UserIDfromSharePoint.
When I set the Excel Web Access -web part to show my workbook, I get the following error:
"We're sorry. We can't open the workbook in the browser because it uses these unsupported features: • PivotTable reports that are set to refresh
when the item in a report filter changes, or external data ranges (also called query tables)
that use parameters"
Is this really true???!??
If I have understood correctly, this has been an issue since the dawn of SharePoints Excel web services.
Does Microsoft really in this age of big data assume that all the SQL queries should be unfiltered or static?
My table has over 3M rows, so it is not possible to bring the whole dataset into excel and filter there. I'll have to say to the customer that we need to build a reporting table into which we'll aggregate the data first rather than querying the necessary
information...

Hi,
Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
check the issue.
Jaynet Zhang
TechNet Community Support

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Mini Web Server Question

I'm guessing there might be a person or two who can help me with a solution for a new mini that I'm using as a web server. Everything is set up and working perfectly. Apache is running well, and I've established my Virtual Hosts and enabled PHP and MySQL. What I haven't been able to figure out, however, is how to go about limiting access to particular directories on my server.
Here is what I would like to accomplish.
I've got a couple of sights that have the root directory of /www/sitename/publichtml/.
In those public_html directories are resource directories with names like "images" "downloads" etc.
From my websites, I pull resources from those directories in order to serve images, resources, etc.
What I would LIKE to do is still allow those directories to serve the resources to the sites, but prohibit direct access to those directories from direct web access. In other words, I want my images to pull from those directories, but I don't want someone to be able to directly navigate to the directory www.sitename/images/imagename.jpg.
I would like some message to show up along the lines of "You do not have permission to access this directory".
I attempted to do this with file permissions, but it either allows total access to the directory or won't allow the web pages to pull the resources.
Does anyone know of any other solution that will help me accomplish my goal?
Thanks!
Chris

You are going to be more likely to get a good answer to this question in the Mac OS X Server forums. If you are using Leopard Server, go [here|http://discussions.apple.com/forum.jspa?forumID=1237].
If you are using Mac OS X Web Sharing you should post [here|http://discussions.apple.com/forum.jspa?forumID=1225].
Best of luck.

New option to open custom Excel content type in Excel Web Access

Hi,
This question is specifically for Sharepoint Online if that affects the possible solution.
I would like a custom content type with Excel template to open up in Excel Web Access when a library's New>"My Content Type" option is chosen. I have configured the content type (deriving from "Document"), pointed it to the spreadsheet
template I've uploaded, added the content type to the library and set the library to "Open documents in the browser".
However when I choose the new option for the content type it always opens it in the Excel desktop client. If I then save the document to the library, then it does view and edit in Excel Web App after that.
Is there any way for the initial "New" Excel document to start editing in Excel Web App?
Thanks in advance,
Peter

Make sure Office 2011 is fully updated. It shouldn't have a problem opening those documents.
When I open a 97 - 2004 workbook, it states that it needs to be converted. That may be what is crashing on your copy of Office.
Have you tried creating a new account and see if you can open them there.

What is default web access password for HP Laserjet P2055dn

I tried to logon to the printer's web access interface, but do not know the username and password.
I need to know either the default username and password, or how to reset it to the default.
Thanks,

Hey @Ingenium88 ,
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet P2055 Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
I worked for HP.

Accessing client using Windows 2008 Terminal Service - Web Access?

Dear experts,
We are developing a network infrastructure solution for our new customer's B1 8.8 implementation.
Our customer would like to utilize Windows Server 2008 Terminal Service to connect B1 client in remote branch with server in head office area. And they want to use Terminal Service - WEB ACCESS. Base on our experience, we successfully implement B1 using Remote Desktop Connection or Citrix to support B1 client in the remote area.
My question is, Has SAP already support to utilize windows "Terminal Service - Web Access" to access B1 client?
If Yes then what are possible issues and solutions?
Thanks,
Indra

Hi,
when we said to customer that it is better to use citrix, they will see some concerns as follows:
1. Investment to buy citrix server
2. License of citrix
3. installation time for ICA client
4. maintenance cost for citrix and its server
The benefits are as follows:
1. Reduce cost to purchase B1 license. Remote and LAN users can access B1 through citrix
2. The connection speed. Citrix is more faster than RDC or terminal services either web access or not
3. The security reason. Check this link:
http://www.virtualizationadmin.com/articles-tutorials/terminal-services/management-tools/terminal-services-internet-information-server.html
In the support platform, there is no windows terminal services web access info. You may check it here:
http://service.sap.com/smb/sbo/platforms
The supported hosted environments are using citrix or windows terminal service. For remote users, the citrix is used for web access and windows terminal services are using IP and the connection is using internet (do not use VPN).
The citrix is not very expensive. We must make them realize the benefit.
Kita harus pastikan citrix itu bagus dan tidak mahal2 amat kok. Beli dari reseller citrix yang diauthorized tetapi tidak big company agar tidak mahal sekali. SAP AG menyarankan menggunakan citrix karena memang sangat bagus.
(in english : we must convince the customer about the citrixs benefit. it is not too expensive. The citrix could be buy from small reseller company so that its price is acceptable. SAP AG suggested to use citrix because it is very best web access).
I know bhs because I am from Indonesia hehehe....
JimM

2012 R2 Web Access Logon

Just trying to get a definitive answer to the age old question of can we remove the initial user logon requirements when accessing the RD Web Access server in a 2012 R2 RDS deployment?
I was under the impression that the Single Sign-On only removes the logon prompts when users try to access a RemoteApp or Session Host once they've logged on to the Web Access server?
Is there a way to use the current users credentials (they're all connecting from domain joined windows 7 or 8 machines) to logon to the RD Web Access site?
Cheers for now
Russell

Hi,
AFAIK you can only to single sign on when using published applications, not to the actual login page on remote desktop web services.
You may be able to look at changing some of the authentication options in IIS and making sure the website is in the local intranet site to see if you can pass through the creds.
Thanks
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:

Spellcheck in Oracle Web Access Client

need the spellcheck in the Email Oracle Web Access Client. The question is:
are this functionality in this Java version of email???
Because I find this functionality (spellcheck) in the HTML version of Oracle
Mail but I cant find the spellcheck in the Java version of email.
Is possible connect the spellcheck from the HTML version to the Java Version or
this is an Enhancement Request to be logged on this issue for the next version.
Thanks
Karla Barreto

Hello,
You can't do that in WAC but in the Webmail interface > Preferences > Account > Folders you can set this for Oracle Mail.
Hope it helps.
Irina

Web access question:

Similar Messages

Maybe you are looking for