Web address deletes as soon as the page loads

Whenever I click a link, or a recently visited page from the drop down history, as soon as the webpage loads, the web address deletes itself. This is annoying because sometimes I'd like to copy paste it to share with friends. Also, similar problem, when I'm typing on a webpage, sometimes it stops typing in on the webpage, and makes me type it in the web address bar, making me click the field i was typing in again. It's happened while I was filling this form out three times. Bought a new keyboard, thinking my tab button was stuck, didn't help. Can I get help for both of these two problems? Doesn't happen in Chrome or IE, but lets face it. . .they are both terrible, I like Firefox.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

Firefox crashes as soon as the page loads it is completely unusable

i got a update prompt from firefox a few hours ago which i installed and now it wont work as soon as the page loads it crashes it wont even stay on long enough to figure out the problem i swear by firefox i have used its for years and never had any problems with it ever if i recall but lately it has been freezing and crashing often i feel like i am using internet explorer and thats bad but now i cant get it to work at all and am forced to downgrade to a lesser program WHAT IS GOING ON????? as for crash ids and troubleshooting info none of that even comes up

Do a clean (re)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_Manager
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

ITunes U Course Manager will not open on my PC. When I open the web address the page loads blank.

iTunes U Course Manager will not open on my PC. When I open the web address the page loads blank. Would like to design a new course.

Try to using the latest version of Safari Browser or Mozilla Firefox.

Every time i go on w website, several other web address keep opening. I get pages for related information and also a lot of pages to download things.

Every time I go on to a different website, several other web address keep opening. I get pages that open up are for related information and also a lot of pages for downloads, including ones to update Firefox.. (Sometimes it even tells me I've downloaded something, and it ask me if I want to save the file or run it. )
Ps.Please also send me the address to update Firefox.
Your help will be so much appreciated!
Anne

Hello,
FIrst scan your computer, this pages can be malwares, addons, etc:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Problems caused by malwares]
Verify if this happens in safe mode:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
You also can use addon to block popup/ads pages:
*[https://addons.mozilla.org/en-US/firefox/addon/simple-adblock Simple Adblock]
*[https://addons.mozilla.org/en-US/firefox/addon/adblock-plus Adblock Plus]
*[https://addons.mozilla.org/en-US/firefox/addon/adblock-plus-pop-up-addon Adblock Plus Pop-up Addon]
*[https://addons.mozilla.org/en-US/firefox/search/?q=adblock More Results]
Upgrade Firefox only from oficial page:
*[http://www.mozilla.org/en-US/firefox/new/ Last Firefox]

When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ? Thank You

When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ?
Also is there any way I can change the contact form email for all of my contact forms at once.
I have over 100 contact forms and i want to make them reach the same email anyway I can do that without going one by one?

If you have placed the image in Muse using File > Place and then scaled the image down in Muse while editing, then Muse publishes/exports the scaled down/optimized image in final output. When using as a Fill, the output size depends on the Fitting option you setup in the Fill options.
As for the contact form email, you would need to specify the email address for each form individually. There is no workflow to edit the same for multiple forms at a time.
Cheers,
Vikas

Web garden - first time the page loads only one chart appears

I have a page with 2 charts in a web garden(it's a sharepoint application). The charts are created programmatically in the Page Load ethod of a custom webpart. Originally we had issues with charts appearing and disappearing but I have changed
the config setting to the following and both charts appear most of the time:
<add key="ChartImageHandler" value="storage=file;timeout=20;dir=C:\inetpub\wwwroot\wss\VirtualDirectories\Myweb\uploadertemp\;" />
The problem I'm having is that the first time a user views the page only one of the charts appears. If i navigate away and return to the page both charts appear. Is there and issue with my config settings that is causing this behaviour?
Thanks
Karen

The answer to this (after months of toying with settings and permissions) is not to user the chart control in a web garden. I have seen the same issue multiple times on-line, with no concrete solution offered .
My workaround is to save the chart to a memory stream and write it to the page as an image, not as a chart control:
Chart chart = new Chart();
//Add data and chart settings here........
using (var chartStream = new MemoryStream())
chart.SaveImage(chartStream, ChartImageFormat.Png);
System.Web.UI.WebControls.Image chartImage =
new System.Web.UI.WebControls.Image();
chartImage.ImageUrl =
"data:image/png;base64," + Convert.ToBase64String(chartImage.GetBuffer());
chartParentControl.Controls.Add(chartImage);

I am using Ipad 2, Wi-Fi is connected but cant open any web-site " error : Safari cannot open the page because it is not connected to the internet "

I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
need support please

You haven't provided much information, such as what type of router you have? If you entered the encryption key as the password as opposed to the router name you have selected? If you have WEP or WPA? What you've tried that didn't work, other than saying it doesn't work? So, below is a link to some assistance. Follow this and see if it helps you.........
http://www.apple.com/support/ipad/assistant/wifi/

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

I have just downloaded the latest version and some sites are part loading then taking ages to complete the page load. why and can you or I do anything about it please.

latest version loads the main banner of page then takes too much time loading the content of page > I have even had to stop the page loading and refresh before it will load properly> I did not experience this before installing the latest version the pages used to load insantaneously. I am not the only one experiencing this as my friend has reverted back to explorer.
Please can you do something about this.

It could be caused by a Firewall. Disable your internet security and then see if QT will open.
Are you an administrator account? It could be a permissions issue. Open the User Accounts control panel to see what type of account you have. Open the QT control panel to File Types. Does it show programmatically set? If so that will indicate permissions have been set by an administator.
Also are there too many applications running at once or loading at start up? Look down at the bottom right corner of the screen, is it loaded with icons? If so close them all out and stop them from running at start up, then see if QT will open. The only application that should load at start up is your internet security and maybe volume control, anything else you can open as needed.
If none of the above is a solution than I can help you uninstall QT and install, if so what version of QT is on the computer now. Open the QT control panel and click on About QuickTime

When I click on a bookmark in the listing, nothing happens. If I right click and click on "Open In New Tab" the page loads. I am using version 14.0.1

Firefox just updated to version 14.0.1. When I clicked on one of my book,marks from the listing, nothing happened. The page did not load. If I right click on the bookmark and choose " Open in a New Tab", the page loads in a new tab. None of my bookmarks will work by simplying clicking on them from the listing.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My page generates an Excel file but sometimes fails if the page loads to slowly...

I'm having a problem generating an Excel file using CF and
looping over a bunch of queries to get a table of data to display
to the user. This is slow but works fine except for an instance
recently where the page seems to be loading but after a few minutes
it stops and says "the page cannot be displayed". The error leads
me to believe it is a server error and not a CF error but I'm not
sure. I don't have timeout checked in my CF Admin so that should
mean that I can request pages for as long as I need to right?
I'm using the cfheader and cfcontent to dynamically generate
an Excel spreadsheet from my HTML. I tried using the cfflush tag
and that seemed to help since it pushes content to the browser
during the page load but it doesn't work with the cfheader and
cfcontent tags.
So then I tried using the cfsavecontent tag and then save the
HTML to a file but again I couldn't use the cfflush tag inside the
cfsavecontent tag so now I'm stuck.
The page DOES load when I run in on my local machine with MX
6.1 Developer Edition and SQL Server Personal Edition. It DOES NOT
work when I run it on my production server that then calls my
separate database server. I'm wondering if there is a timeout (non
CF) set somewhere on the productions server or the database server
or if there is some sort of limit to the amount of data you can
transfer between servers?
I'm totally stumped now so any advice is greatly
appreciated!

That didn't work for me and the page times out right about 5
minutes (300 seconds). I don't have timeout checked in the CF
Administrator so I don't think it is CF that is causing the
timeout. I checked IIS also and the timeout is set to 900 seconds.
Is there a possibility that SQL Server has some sort of
connection limit and I'm using too many cfquery tags? If anyone has
experienced a similar problem I would really appreciate the help,
thanks.

Using a4j to load a rich:dataTable after the page loads

I have a rich:dataTable that calls a session bean which executes an SQL query to generate the data to be displayed in the table. Something simple like:
<rich:dataTable rowClasses="evenRow,oddRow"
rows="30"
value="#{Bean.items}"
var="items">
where Bean.getItems() performs an SQL query and returns List<Item>.
The problem is that the query takes a long time to execute (~45 seconds) and I'd like the page to initially load while the query is being executed, displaying a spinner while it loads. Once the query is done, I'd like to update the initially empty table using ajax.
I set up a spinner using a4j:status and it works fine after the page initially loads (using a rich:datascroller).
However, the page will not initially load until the query completes, which is a problem because the query is so slow. What happens is the user clicks on the "List Items" tab from my site's homepage, sits there on the same page for 45 seconds with absolutely no visual indication that anything is happening, and then finally is taken to the list of items page.
What is needed to make the dataTable load via AJAX the first time, as well as all subsequent times?
Thanks!
Edited by: rcrowell on Sep 8, 2008 5:42 PM

rcrowell wrote:
The issue isn't the PK of the table; the query is joining across many tables and aggregating data from one table in particular with millions of rows. The table has paging, but again that won't help the timinig issues due to the aggregation that must be performed on a large table.
Surely there must be a way to get the dataTable to always load its data via ajax, and not only after the first time.Well JSF does not have AJAX built-in, so why would there be? Perhaps one of the AJAX-based frameworks has this. I imagine it wouldn't be hard to do with the existing AJAX frameworks even without a built-in component specifically for it. Trigger an AJAX action on load which rerenders a panel which will only contain the dataTable upon the rerendering.
>
I think I could do it by adding a 'dataTableRendered' variable to the bean and using a jsFunction to set this variable to True when the page loads, but I'm looking for a better way. (I'm also not 100% sure this would do what I want.)

Have been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's and the same if I click a link on the page.

been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's.'''bold text'''

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Dynamically setting where clause parameter before the page load

Hi Experts,
I do have the following requirement.
I am working on jsf page in ADF10.1.3.3. I have a View Object which displays the results on the screen. Can someone provide me some example where I can dynamically set the where clause parameter to my Query in VO before the Page Load happens(By Overriding the Prepare Model) and display results on screen.
Thanks

Hi,
Thanks for yor advice.
I need to write the method in Prepare Model method when the page loads and not in AM.
Here in the page there is no action as such.
On the Page load we need to directly set the Where Clause on the VO.
Provide me some examples if any.
Thanks

I'm on Mac OS lion and since your new upgrade, the page loads of center, with no scroll bar. On every computer I run I have to resize the page for the page to load correctly. How can I fix this?

I'm on Mac OS lion and since your new upgrade, the page loads off center, with no scroll bar, this happens on every computer I run.
In order to have the page load correctly, have to manually resize the page.
How can I fix this?

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Web address deletes as soon as the page loads

Similar Messages

Maybe you are looking for