Web ADI and Excel XP

Hi,
I am trying to create a custom integrator using HR Integrator setup. The downloaded excel sheet shows up a modal window " Processing: Create Document" and it remains in that state forever. I also dont see Oracle menu option in the menu bar. My desktop configuration is: Windows XP home & Excel XP and I have set required options in IE and Excel. I tried on another desktop with Excel 2003 and it works fine there. So did any one face any issues working with Excel XP?Any help is much appreciated.
Thanks,
Murari

I am using Web ADI with Excel XP and it is working fine. Please ensure that the Security Level is set to Medium and Trusted publisher is also set to "Trust access to Visual Basic Project".
Also, for the browser set browser security correctly i.e
in Local Intranet -> Custom Level -> "Initialize and script ActiveX controls not marked safe" to Prompt

Similar Messages

  • Web ADI with excel 2010,

    Hi,
    Is it possible to use Web ADI with excel 2010.
    I saw an article in metalink saying we need to apply a patch in order to word.
    However we were able to generate the template without applying the patch, but it didnt have the Oracle under Add Ins menu.
    Does anyone know if it is possbible to use web adi with excel 2010 without appying a patch.
    Thanks and Regards,
    MPH

    Hi
    Please try this
    Close all your excel windows which you have opened
    open new excel, navigate to
    File-->Options-->Trust Center--> Click on Trust Center Settings
    select Macro Settings --> Select the radio button Enable all Macros (not recommended;potentially, dangerous code can run) { dont worry about selectign this option once web adi is downloaded changes back to its original disable notifications icon}
    Enable the check box Trust Access to the VBA Project Object Model
    Click on OK again click on OK close the excel
    Thanks
    Krishna

  • ADI and Excel 2007 compatibility

    Hi everyone,
    Do you know if ADI 7.2.0.09.12 is compatible with Excel 2007?
    The users here at office have Excel 2007 and when trying to use ADI, the system gets hung.
    Thanks in advance,
    Jose

    ADI release 7.2.10 (Patch 6455020) is certified with Microsoft Office 2007
    For more details, please refer to:
    [Note: 443515.1 - Is ADI Certified With Microsoft Office 2007?|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443515.1]
    [Note: 434917.1 - Is There a Version of ADI That is Compatible With Office 2007?|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=434917.1]
    For Web ADI, refer to:
    [Note: 466229.1 - Are there Web ADI Viewers available that are compatible with Microsoft Excel and Word 2007|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466229.1]

  • Web ADI and Autopost

    Currently, we are setup in GL to autopost all GL journals. I am trying to troubleshoot a Web ADI issue and for a particular user, I'd like to have the uploaded spreadsheet data stay in the interface table rather than post to GL. I believe there is some problem with this template. I'm told setting the profile option BNE Allow Set Parameters would all the person uploading to choose whether to post or not, but from my understanding, if you change that option, don't you have to download a new template for that to take effect? If so, that would defeat my purpose of checking out what is wrong with the existing spreadsheet. If this is the case, is my only other option to disable autopost?

    Yeah, that's what I was thinking originally until someoneone told me about the profile option. I was hoping I could do it by profile option and really just trying to understand how this works with Web ADI as I am a Web ADI newbie. From what I saw elsewhere it didn't sound like the profile option would work for my purposes and was trying to confirm that here. If it requires downloading the template again after changing it, then it won't work for me.

  • Web ADI and Windows error 1706

    Hi everyone,
    In a test instance I've configured Web ADI. When an accountant tries to create a spreadsheet he gets a popup box saying, "Please wait while Windows configures Oracle Client." Followed by the error, "Error 1706. No valid source could be found for product Oracle Client. Windows Installer cannot continue." He can click OK and get past the message but it happens every time.
    I've searched MOS but came up empty. Does anyone have any ideas?
    Thanks!
    Sharon

    Sharon,
    I can't get anyone else willing to test until I get this problem resolved on this one work station.Please try from some other machine as suggested before in my previous reply and see if you can reproduce the issue.
    Also, check the BNE.log file for any errors and post it here.
    Thanks,
    Hussein

  • R12 Web ADI and Internet Explorer 7

    Hi,
    We have recently upgraded from 11.5.10.2 to R12.1.1
    We are using Web ADI now, instead of Client ADI.
    We had to stay on Internet Explorer 6 while on 11.5.10.2 due to needing Jinitiator.
    Now we're on R12, and using Java, we would like to move up to Internet Explorer 7.
    However, I can't find any official documentation / certification to say that Web ADI will work with IE7.
    Testing seems to show that it works with IE7, but I'd like to find something official from Oracle to show to my desktop colleagues.
    Does anyone know of anything like that? I've looked on My Oracle Support but cant' find anything.
    Any advice much appreciated.
    Thanks

    Please see the docs referenced in these threads.
    Web ADI is not certified for IE7 and Windows XP...Supportable?
    Web ADI is not certified for IE7 and Windows XP...Supportable?
    WebADI for IE 7 or later version
    WebADI for IE 7 or later versions
    Thanks,
    Hussein

  • ProClarity Web Professional and Excel 2013

    Hi
    I've recently installed Excel 2013 Professional Plus and I've noticed a slight change in behaviour between ProClarity and Excel when Export to Excel is used.
    When I export to Excel two Excel workbooks seems to open - 1 called Book1.xlsx is simply an empty workbook, the second one contains the data that has been exported from ProClarity. Unfortunately since I installed Excel 2013, then workbook which appears in
    front is the blank workbook. When I had Excel 2010 installed, the workbook with exported data appeared as the front window.
    We are about to embark on an Excel 2013 rollout and I know this will generate calls with our ProClarity users.
    Any ideas why this is happening and how to resolve?
    Regards,
    Katherine

    Another breakthrough with this case is that when you install Office Web Apps SP1 this will enable you to open the OneNote from Apple Tablets or Android Tablets.
    One More thing is that Android Tablets does not support opening the sharepoint site by the server name only ie http://servername/ you need to add the domain at the end like this http://servername.domain.local/ and in order to open the onenote on tablet you
    need when creating the wac farm to add the domain in the command
    New-OfficeWebAppsFarm –InternalUrl http://webappservername.adjd.local –AllowHttp –EditingEnabled
    Regards Malek

  • Web ADI Report set, excel is not showing the data for any of the three repo

    We are currently working on 11.5.10.2 and moving from Desktop ADI to Web ADI. At the time of publishing report in Web ADI the excel is empty.
    AFter successfully running the WEB Adi reportset for Consolidate Balncesheet ( for a period ex: APR-2012), there were 3 reports that were publlished as a set. Then I went to Repository Management and went to the folder and subfolder where I saved all the above 3 reports. When I click on view on one of the reports, the excel spreadsheet opens and try to load something for a while but finally ends up loading nothing.
    I am unable to figure out what went wrong. Do you have any idea.
    If someone can help me, I really appreciate.
    Thanks
    Uday

    Hi ,
    In u r query what I observed was unit cost*gross profit is Amount Sold. Can u make this calculation with Physical calculation rather than and logical calculation.
    See if u have kept logical joins for both the tables with the fact and set the content level at detail level in the content level of fact.
    Then it will work
    Thanks
    S

  • Getting SQL Exception occurred during PL/SQL Upload instead of custom message in Web ADI excel.

    I am using procedure driven WEB ADI and want to do basic validation for the same.
    The code for validation is:
    BEGIN
             SELECT 'X'
               INTO V_X
               FROM DUAL
              WHERE P_FROM_DATE IS NOT NULL
                AND P_TO_DATE IS NOT NULL;
          EXCEPTION
             WHEN OTHERS
             THEN
                HR_UTILITY.SET_MESSAGE (800, 'PLEASE FILL THE DATES');
                HR_UTILITY.RAISE_ERROR;
          END;
    The error is fired as required, but the message is not the one which I want to show. In the message it says:
    SQL Exception occurred during PL/SQL Upload instead of 'PLEASE FILL THE DATES'.
    PFA the complete procedure for your consideration.
    Awaiting your quick reply.

    Can you please paste the complete error message(stack)
    better post sql, pl/sql ones in the below forum -
    PL/SQL

  • Web ADI Error: Permissions and Connection Issues (Please Help)

    Hello
    I'm new to WEB ADI and I'm trying to set up on an 11.5.10 Oracle Application. I'm reading the white paper "Understand and using Web ADI in Oracle HRMS" From metalink
    I created the functions Create Document, Web ADI Layout Definition, Web ADI Text Mapping and HRMS Create Document. I also create the sub menus HR ADI Seeded Integrator Form Functions and HR ADI Skills Seeded Integrator Form Functions in the menu US_SHRMS_NAV, and made sure the ‘BNE Allow No Security Rule’ is set to Yes
    I was able to get the seeded download procedure to work, however the seeded upload procedure didn't work for me. I received an error " The connection to the server is unavailable". I also notice that I don't have access to HR Update Salary Proposals Integrator or the HR Integrator Setup integrator, when I select them from WEB ADI I get the following error "You do not have permission to access this functionality."
    Can someone please assist me in get passed these issue?

    Please see these docs.
    When Trying To Upload the Salary Proposal Receiving Connection Unavailable Error [ID 604200.1]
    Error -The Connection to the Server is Unavailable When Upload Web ADI - Interface Columns Integrator [ID 394680.1]
    WebADI Upload ''Connection To The Server Is Unavailable'' While Uploading [ID 419995.1]
    Web ADI Create Document Fails - Connection to The Server is Unavailable Error on Worksheet [ID 334632.1]
    Connection To The Server Error Message When Using WEBADI journal upload [ID 556465.1]
    WEBADI Cannot Upload ADI Spreadsheet Because "The Connection To Server Is Unavailable." [ID 359584.1]
    Connection Unavailable Error Occurs When Uploading Files In Web Adi [ID 271811.1]
    Error 'The Connection To The Server Is Unavaiable' when Uploading WEB ADI Document [ID 847091.1]
    BNE.D Web ADI Letters Fail to Export Download is an Empty Document - Spreadsheet [ID 329926.1]
    Also, please check the BNE.log file for details about the error -- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]
    Thanks,
    Hussein

  • Web ADI of Financial Modules

    Hi guys ,
    m new to Web ADI.can you told me how many modules of Financial have Web ADI and for what function this ADI is available.
    Regards,
    SK
    Edited by: shakeel khan on Oct 6, 2010 12:53 AM

    Hi,
    Please refer to the following documents/links.
    Note: 452452.1 - R12:Installing, Configuring and Troubleshooting Web ADI (Web Applications Desktop Integrator)
    Note: 736621.1 - List Of All Webadi Integrator Patches For R12 EBusiness Modules
    Note: 455618.1 - Where To Find R12 WebADI Documentation
    Web ADI
    Web ADI
    Thanks,
    Hussein

  • Web adi documentation

    Hi,
    I have a few questions about web adi , and I would much appreciate your help.
    1. Is there an Oracle Web Adi Developer's Guide, or any other official documentation besides the "Oracle Web Applications Desktop Integrator Implementation and Administration Guide" .
    2. Can I create LOV's for the parameters i defined for a custom integrator with HQ Create Standalone Query ? If yes, how ?
    3. Can I break the generated spredsheet into several worksheets, based on the distinct values in a column ?
    Any information would be very helpfull.
    Thanks.

    Hi,
    Unfortunately it doesn't help .
    In the topic you posted, the last answer is that there is no developer guide. I thougt that since then, something came up.
    I read that for cusomizing the interface for custom integrators , I should use Java , but I haven't been able to find some documentation as to exactly how i i do that.
    Thank you,
    Sergiu

  • WEB ADI Access

    I create one custom integrator in the web Adi, and its working fine from desktop integrator responsibility,
    but I want to give the access on this one Integrator to particular user, but when I attach the desktop Integrator Resp to user some other integrator also available to that user,
    Please guide me how to give the access of only one Integrator to user, means in the list of LOV only one integrator need to be visible.
    Thanks
    Parag

    Hi Sathish,
    when I attached the custom function into the custom menu and responsibility its not visible into the responsibility,
    so I attached "Desktop Integration - Create Document " then only my web adi comes into the list of values into the desktop integration form,
    but the issue is some more web adi also comes into the list.. I want to restrict other web adi from that list. so that HR people only access HR related web ADI. now some finance related web adi also comes into the list of values.
    thanks
    parag

  • Web ADI Run a database sequence per row

    Hi,
    I'm new to Web ADI and I'm trying to call a database sequence for column A to generate value per row for the upload in a custom web ADI, but every time the sequence runs once for the whole batch generating duplicate values.
    This is what I've tried so far:
    1. Called the sequence in the interface section as default SQL Query for a column A. Made the column to appear at Line in the layout.
    2. Added an import rule sequence
    3. Wrote a database trigger for the temp table and called the sequence before insert: in this case the sequence runs fine and generates values per row but $PARAM$.ColumnA is null.
    I need this for row identification, otherwise if there is duplicate rows the error message overlaps.
    Please help.
    Regards
    Arnab

    Hi,
    What was the workaround for this problem?
    Please share.
    Thanks

  • WEB ADI Error with Excel - Compile Error

    I am trying to export data to Excel. The process works until the data is loaded to Excel whereupon I get a Microsoft Visual Basic error "Compile Error: User-defined type not defined.
    Behind the error message is several screens from VB with the following line highlighted "Dim oParser As New SAXXMLReader30"

    Please post the details of the application release, database version and OS.
    I am trying to export data to Excel. The process works until the data is loaded to Excel whereupon I get a Microsoft Visual Basic error "Compile Error: User-defined type not defined.Can you find any details about the error in the BNE.log file? -- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]
    Behind the error message is several screens from VB with the following line highlighted "Dim oParser As New SAXXMLReader30"Please see if (Web ADI: Compile Error - Userdefined Type Not Defined LEDGER_IDDetails [ID 1319992.1]) is applicable.
    Thanks,
    Hussein

Maybe you are looking for