Web ADI Report set, excel is not showing the data for any of the three repo

We are currently working on 11.5.10.2 and moving from Desktop ADI to Web ADI. At the time of publishing report in Web ADI the excel is empty.
AFter successfully running the WEB Adi reportset for Consolidate Balncesheet ( for a period ex: APR-2012), there were 3 reports that were publlished as a set. Then I went to Repository Management and went to the folder and subfolder where I saved all the above 3 reports. When I click on view on one of the reports, the excel spreadsheet opens and try to load something for a while but finally ends up loading nothing.
I am unable to figure out what went wrong. Do you have any idea.
If someone can help me, I really appreciate.
Thanks
Uday

Hi ,
In u r query what I observed was unit cost*gross profit is Amount Sold. Can u make this calculation with Physical calculation rather than and logical calculation.
See if u have kept logical joins for both the tables with the fact and set the content level at detail level in the content level of fact.
Then it will work
Thanks
S

Similar Messages

  • After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

    After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

    Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc")  upwards.  I thought it was gone too but it's still there~just takes different way to access it.

  • LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

    Hi,
    The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
    Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
    Please let me know if there is any other way to remove the last data fresh without showing the empty space.
    We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
    first(last(<All InfoProviders under Multi - ROLLUPTIME>))
    It uses the earliest rollup time from the last rolluptime of all the base providers.

  • SCEP manager is not showing current logs for any SCEP clients

    I have installed SCEP manager on one machine and it is managing one client, which is on another machine.
    Client is showing virus detected logs in SCEP client UI, but the same events/logs are not getting stored in SCEP manager database, i tried pulling out records from database, there is no entry for detected viruses in the database, and SCEP manager UI monitor
    tab is also not showing any detected events.

    Hi,
    Active means that it has been active and communicated with the MP within the last 7 days, not that it is active now.
    That means that you either haven't extended the Active Directory or created the System Management container in AD and delegated permission to that container and all the child object to the ConfigMgr Primary Site Server Computer account. But that isn't a
    requirement only a rekommendation.
    If you look in the client in ClientLocation.log file can the client find an MP to communicate with? Any more errors in the MPcontrol.log file on the server?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Mail is not showing proper dates for messages

    Hi,
    I just set up Mail and it imported over 9000 emails from my IMAP account. It has the correct "date received" for about the last 20 emails I received, but after that ALL 9000 or so messages have an identical time stamp: 21 March 2009 1:26 p.m..
    Completely random?
    The real dates show up fine in webmail and in Thunderbird using IMAP.
    What the heck?!
    Any advice?

    Nope.
    Usually crappy support expected for proprietary software... it's all compiled and secret so who know what the heck is happening.
    I should say the only reason I use Mail.app is because of its global inbox for IMAP accounts feature.

  • I am not getting the dialogue for any of the photomerge options on elements 13?

    I have just downloaded elements 13 as an upgrade because I want to use the photomerge options.  I have watched the tutorials and they show a dialogue box on the right to choose brush size etc.  That is not coming up on my program and I can only do 'guesswork' to make a merge happen.

    I have just downloaded elements 13 as an upgrade because I want to use the photomerge options.  I have watched the tutorials and they show a dialogue box on the right to choose brush size etc.  That is not coming up on my program and I can only do 'guesswork' to make a merge happen.

  • Wireles sync not found in options for any of the "syncable" modules

    When syncing, I get a message that my Outlook calendar can't be synced because Wireless is turned on.  Help tells me "
    On your BlackBerry® device, in the Calendar application, Contacts application, Tasks application, or MemoPad, press the Menu key > Options.
    If necessary, click a calendar or contact list.
    Change the Wireless Synchronization field to No or clear the Wireless Synchronization check box.
    Press the Menu key > Save.
    the problem is that when I go to Options there is no "Wireless Synchronization" field.  All I find is Calendar Display, Confernce Calling, and Date & Time. The two accounts, my gmail one & the blackberry.net acount are also displayed.
    What I'm doing wrong or am I barking up the wrong tree?
    Ken
    Solved!
    Go to Solution.

    Ok, I'm currently stumped.  I'm going to request that your thread be moved to the BlackBerry Desktop Software board and maybe someone else can provide some more assistance. 
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • My phone was hacked, Verizon assured me that I would not be responsible for any of the charges.  I paid my bill on due date and my phones were suspended 2 days later,mi had to drive 10 miles to a Verizon store for them to call to get them restored.

    MY phones were hacked on March 12, I was assured I would not be held responsible for any of the charges. I paid my bill on due date and 2 days later my service was suspended. In had to drive 10 miles to a Verizon store for them to call and get them restored.  They offered no explanation but said they had taken care of it, NOT, it is back on my bill and higher.  I call and put on hold for 15 mins. I guess they will suspend them again this month.  I am so tired of dealing with them with this matter.   Feed up!

        I do hope you're having a great trip, answermeasap. I can understand your concern with getting an unexpected bill. I have sent you a follow request here in the forum. Please access https://community.verizonwireless.com/actions to accept my request and follow me https://community.verizonwireless.com/people/jenniferh_vzw back so you can send me a private message https://community.verizonwireless.com/docs/DOC-1613 so we can take a look at what caused your current bill and make sure the correct suspend option is in place.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • Excel is not showing multiple Drill thru report selection option

    We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
    essbase 7.1.6 version SQl server 2000

    Hi,
    This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
    Regards,
    Suman

  • Not able to export web analysis report to excel smart view from workspace

    Not able to export web analysis report to excel smart view from workspace.
    Error :Web launch operation has been cancelled.
    Can anyone help me to resolve this issues

    I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
    My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
    @Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

  • WEB ADI Error with Excel - Compile Error

    I am trying to export data to Excel. The process works until the data is loaded to Excel whereupon I get a Microsoft Visual Basic error "Compile Error: User-defined type not defined.
    Behind the error message is several screens from VB with the following line highlighted "Dim oParser As New SAXXMLReader30"

    Please post the details of the application release, database version and OS.
    I am trying to export data to Excel. The process works until the data is loaded to Excel whereupon I get a Microsoft Visual Basic error "Compile Error: User-defined type not defined.Can you find any details about the error in the BNE.log file? -- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]
    Behind the error message is several screens from VB with the following line highlighted "Dim oParser As New SAXXMLReader30"Please see if (Web ADI: Compile Error - Userdefined Type Not Defined LEDGER_IDDetails [ID 1319992.1]) is applicable.
    Thanks,
    Hussein

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • Problem between SSMS and Report ! Filter query not showing data or showing wrong data

    Hi all,
    In short: I have a report with multiple values such as name of shop, postal code etc. The parameters have no default value and act as "like". If someone enters "krant" he'll get all the shop names that contain "krant" in their
    name etc. 
    Same goes for postal code, if someone enters 2550 he'll get all data for 2550. The problem although is that if a user start with postal code as parameters and leaves the shop name empty, the shop name is not shown in my report! The other way around it works,
    when I enter shop name i'll get all shops + postal code in my report.
    I know this is because POS name cannot be shown in report because it's left blank, but I want my MDX query to be able to give me the POS names even if I only enter postal code.
    Can someone please please look at my query below? I need to add 4 more parameters this way later on too!
    SELECT 
    [Measures].[Sales amount]
     ON COLUMNS, NON EMPTY
    Filter(
                                   [Point of sale].[POS name].AllMembers,
                                   InStr(
                                                   [Point of sale].[POS name].CurrentMember.MEMBER_CAPTION,
                                                   @PAR_POSName
                                   ) > 0
    *Filter(
                                   [Point of sale].[POS postal code].AllMembers,
                                   InStr(
                                                   [Point of sale].[POS postal code].CurrentMember.MEMBER_CAPTION,
                                                  @PAR_POSTAL_CODE
                                   ) > 0
    *[Point of sale].[Client id].[Client id]
    *[Point of sale].[POS id].[POS id]
    *[Point of sale].[POS street].[POS street]
    *[Point of sale].[POS town].[POS town]
    *[Point of sale].[POS housenumber].[POS housenumber]
    ON ROWS
    FROM [mycube]

    You have to use
    StrToMember (MDX) /
    StrToSet (MDX) /
    StrToTuple (MDX) to convert the Parameter; see
    Parameterized Reporting Services Reports with Analysis Services as a Data Source
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Date of a tdm file set in LabVIEW not showing up in diadem

    Hi.
    I 've got a problem with the date string in Labview. If I set a property of a tdm file by using the diadem connectivity vi the datestring only consist of three "-" in the diadem file portal. I'm using the time stamp vi and connecting its exit with the express vi "set property". What did I wrong?
    (Sorry for my English)

    Hi Brad.
    Thanks for the code. It worked so far, but this isn't what I had in mind. The Express VI "set property" within the Diadem Connectivity VIs has a connection named "time stamp", which can be used to set the date for a tdm file by connecting the Labview VI "time stamp" with it. If I load or save a file in LabVIEW, everything works fine, it's only Diadem, which doesn't recognize the date or time. I need the date, when the tdm file was created, for the first page of a test record. The variable "DataSetDate" returns only "---".
    Thanks a lot,
    AndreasMessage Edited by Andreas on 04-01-2005 02:05 AM
    Message Edited by Andreas on 04-01-2005 02:12 AM

Maybe you are looking for