Web Admin Console Hanging

I am trying to open the web admin console but the browser session just hangs - occasionally the session will get to the login screen, but after entering user/password, the session just hangs.
Any ideas please ?
Eric Jones.

The problem persists when accessing directly on the server.
To recap
The OS is Win2008 64-bit.
Software installed in the program file (x86) folder.
The Apache Tomcat homepage is also inaccessible.
After approximately 20 minutes the Apache Tomcat homepage will render.
This suggests the installation is correct, just very slow.
Eric.

Similar Messages

The WRT160N's Web Admin Console Keeps Becoming Unaccessible

Hi all,
I just bought a WRT160N v2 Router to replace my WRT54G.
For some reason, after the router runs for a few hours or a day, the Web Admin Console becomes unaccesible to both wired and wireless computers in the network.
I set it up to work on https only, which always worked with WRT54G. And I don't think that is a problem.
It simply works and after a while it doesn't. Resetting the router solves the problem temporarily. It's like the router doesn't accept HTTP requests from anyone all of the sudden.
I disabled firewalls and everything else running on both the wired and wireless clients without success.
I can successfully ping the router IP (192.168.1.1) but pointing to https://192.168.1.1 has no success.

The same thing happened to me when I upgraded to build 11. Now both wired and wireless disconnects occur frequently instead only wireless occasionally. For most devices you can download and re-flash the previous firmware - but not with Linksys I guess. Because I was beyond the 30 days return limit, I ended up buying a cheap Netgear G router (the same as what the Linksys was replacing) which works flawlessly. I will keep the Linksys in hopes that future firmware (if they ever release any) will address these issues. The reason I got the N was faster in network speed and increased wireless range. When it was working, with the build 8, I did have have problems connecting both laptops at the maximum speed for N. I had to downgrade to the standard path.
I bought Linksys because of its affiliation with Cisco, but in hindsight I probably would have tried the Netgear N.
Again, I STILL cannot believe you cannot get the previous firmware version!

CAM Web Admin Console is Unavailable

Hi All,
We have two CAM appliances and they are configured in HA mode. Today i have noticed that one of them is active and the other one is dead and I can't access it by using web admin console although i can access it by CLI and I can ping the active one from it and also ping the failover IP. What is the reason of the following error message? why couldn't I access its web admin console?
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Thanks in advance.

Hi Faisal,
Thanks for your reply.
The failover interfaces are UP-UP on the two switches that are connected to the CAM appliances. please find below the status of the two failover interfaces on both appliance as they can't ping each other:
[root@CAM1 ~]# ifconfig eth1
eth1      Link encap:Ethernet HWaddr 00:26:55:1E:1D:62
          inet addr:10.10.10.5 Bcast:10.10.10.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:57 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12132 (11.8 KiB) TX bytes:192 (192.0 b)
          Interrupt:82 Memory:fa000000-fa012100
[root@CAM1 ~]# ping 10.10.10.6
PING 10.10.10.6 (10.10.10.6) 56(84) bytes of data.
ping: sendmsg: No such process
ping: sendmsg: No such process
ping: sendmsg: No such process
[root@CAM2 ~]# ifconfig eth1
eth1      Link encap:Ethernet HWaddr 00:26:55:1E:5A:A2
          inet addr:10.10.10.6 Bcast:10.10.10.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:179 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1543 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:91286 (89.1 KiB) TX bytes:277538 (271.0 KiB)
          Interrupt:82 Memory:fa000000-fa012100
[root@CAM2 ~]# ping 10.10.10.5
PING 10.10.10.5 (10.10.10.5) 56(84) bytes of data.
So, what can i do to solve that problem??

TFS 2013 Upgrade 3 Admin Console hangs

Hi,
I upgraded TFS 2013 to TFS 2013.3 and it worked ok for few days. Now when i try to access TFS Admin Console it hangs. When I try to access through TWA its d same problem.
I did a)Recycle App pool b)Restart the TFS site c)Reboot the server yet I find the same error.
Can you please help me in the right direction to fix the issue.
I get in the event viewer as below:
TF53010: The
following error has occurred in a Team Foundation component or extension
TF400703: Unable to initialize the specified service
Microsoft.TeamFoundation.Server.Core.Location.TeamFoundationConnectionService.
Web Request Details Url:
TF400733: The request has been canceled: Client disconnected.. (type RequestCanceledException) Exception Stack Trace: at Microsoft.TeamFoundation.Framework.Server.TeamFoundationRequestContext.GetService[T]() at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.Execute(ExecuteType
executeType, CommandBehavior behavior) at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.ExecuteReader() at Microsoft.TeamFoundation.Framework.Server.PropertyComponent5.GetPropertyValue(ArtifactSpecDbPagingManager dbPagingManager,
IEnumerable`1 propertyNameFilters, ArtifactKind artifactKind, GetPropertiesOptions options) at Microsoft.TeamFoundation.Framework.Server.CommandGetArtifactPropertyValue.ExecuteInternal(ArtifactKind artifactKind, IEnumerable`1 propertyNameFilters, ArtifactSpecDbPagingManager
dbPagingManager, GetPropertiesOptions options) at Microsoft.TeamFoundation.Framework.Server.TeamFoundationPropertyService.GetProperties(TeamFoundationRequestContext requestContext, IEnumerable`1 artifactSpecs, IEnumerable`1 propertyNameFilters, GetPropertiesOptions
options) at Microsoft.TeamFoundation.Server.Core.TeamFoundationCatalogService.BuildCatalogObjects(TeamFoundationRequestContext requestContext, List`1 databaseResources, List`1 databaseServiceReferences, List`1 databaseNodes, List`1 databaseDependencies, CatalogQueryOptions
queryOptions, List`1& matchingNodes, List`1& matchingResources) at Microsoft.TeamFoundation.Server.Core.TeamFoundationCatalogService.QueryNodesInternal(TeamFoundationRequestContext requestContext, IEnumerable`1 pathSpecs, IEnumerable`1 resourceTypeFilters,
IEnumerable`1 artifactIdFilters, CatalogQueryOptions queryOptions) at Microsoft.TeamFoundation.Server.Core.TeamFoundationCatalogService.QueryNodes(TeamFoundationRequestContext requestContext, IEnumerable`1 pathSpecs, IEnumerable`1 resourceTypeFilters, IEnumerable`1
propertyFilters, CatalogQueryOptions queryOptions) at Microsoft.TeamFoundation.Server.Core.TeamFoundationCatalogService.QueryNodes(TeamFoundationRequestContext requestContext, String pathSpec, Guid resourceTypeFilter, IEnumerable`1 propertyFilters) at Microsoft.TeamFoundation.Server.Core.Location.TeamFoundationConnectionService.Microsoft.TeamFoundation.Framework.Server.ITeamFoundationService.ServiceStart(TeamFoundationRequestContext
systemRequestContext) at Microsoft.TeamFoundation.Framework.Server.ServiceProvider.GetServiceImpl[T](TeamFoundationRequestContext requestContext)
Thanks,
Su
Su

I removed cache from program data.. then i got it installed.
however after instalaltion; when i try to open tfs admin console.. it hangs
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Hang" />
<EventID Qualifiers="0">1002</EventID>
<Level>2</Level>
<Task>101</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-26T11:17:52.000000000Z" />
<EventRecordID>733275</EventRecordID>
<Channel>Application</Channel>
<Computer></Computer>
<Security />
</System>
- <EventData>
<Data>TfsMgmt.exe</Data>
<Data>12.0.30723.0</Data>
<Data>530</Data>
<Data>01d020fd21076938</Data>
<Data>0</Data>
<Data><Program Files>\Microsoft Team Foundation Server 12.0\Tools\TfsMgmt.exe</Data>
<Data>d23245ab-8cf0-11e4-aeba-005056a63d84</Data>
<Binary>55006E006B006E006F0077006E0000000000</Binary>
</EventData>
</Event>
Su

BO 5.1.7 admin console hangs

Hi All,
We are running BO 5.1.7. The issue is we have imaged the working environment to a new enviornment, this is on unix environment. Infoview works fine on the old server as well as the new imaged server, but when we launch admin console it just hangs after entering username and password.Restarted all the servers but the issue still persists.
Could anyone of you please suggest your thoughts...
Thanks...

It's been a long time since this version but is your OSAgent running on the new machine on a different port from the old machine? If not, make sure it is. It should be in the range of 1024-65535. You could use osfind to determine if another is listening on the port as well.
Check these as well:
1202038 - How do you have the server Administrator Tool connect to a different cluster manager or change the OSAGENT_PORT and Broadcast Agent's IP address from the client Console and Administrator Tool?
Version   1     Validity: 08/23/2000 - active
Language   English
Edit Show change log Show Internal Memos
Content:    Summary   |   Header Data   |   Product   |   Other Properties
Symptom
You want the Server Administrator Tool to connect to another cluster.
Console and Administrator Tool installed on a client machine: You have these modules installed on a client machine for administration purposes and want to change the OSAGENT_PORT and IP address to monitor and administer another Broadcast Agent Server.
Resolution
****CONFIGURATION*****
Broadcast Agent version 5.1
*********RESOLUTION*****
Here are the steps to follow:
1. Open the "ORBDesktop.ini" file for editing. It is located under the following directory:
Business Objects\Server\System 2.5\Bin
2. Specify the new ORBagentAddr and ORBagentPort parameter values under the [COMMON] section.
Keywords
5244 ,
Header Data
Released on 11/27/2000 20:55:47 by Lineu Reis (I817971)
Release Status Released to Customer
Component BOJ-BIP
Responsible Lineu Reis ( I817971 )
Processor Lineu Reis ( I817971 )
1204280 - How do you check CORBA conflicts with the Osfind tool?
Version   1     Validity: 06/26/2001 - active
Language   English
Edit Show change log Show Internal Memos
Content:    Summary   |   Header Data   |   Product   |   Other Properties
Symptom
On a WebIntelligence server, there are several causes of conflicts with CORBA products including:
- PC Anywhere
- Tivoli server management software
- If you have a Compaq server, the "Surveyor" service may not be disabled
- You do not have a dedicated server
- The Oracle database is not installed on the same server as the WebIntelligence Server
In the cases of "PC Anywhere" and "Tivoli", you must you must disable these products and/or any other third party software that use the CORBA architecture.
You can visit the manufacturer websites to determine if an application uses CORBA.
Resolution
****CONFIGURATION*****
WebIntelligence version 2.x
Windows NT
*********RESOLUTION*****
To use the osfind tool, you must launch a DOS command prompt.
Type the following line at the command prompt to generate a "*.txt" file called "osfind":
"C:\Business Objects\Server\ORB 2.5\Bin osfind > osfind.txt"
The file will contain entries similar to the following lines:
osfind: Found one agent at port 14742
HOST: lab12.uk.businessobjects.com
osfind: Found 1 OADs in your domain
HOST: lab12.uk.businessobjects.com
osfind: Following are the list of Implementations registered with OADs.
HOST: lab12.uk.businessobjects.com...................................................................................................................................................................................
Note: It is important to check this file for the number of ports and the port number(s).
You can also have different OADs in your domain if you have a server manager and a node.
*********MORE**************
See resolution entry # 7559 for more information on testing CORBA conflicts.
Keywords
7558 ,
Header Data
Released on 07/13/2001 14:30:53 by Support SAP (SUPPORT)
Release Status Released to Customer
Component BOJ-ERQ-WBI
Responsible Support SAP ( SUPPORT )
Processor Support SAP ( SUPPORT )
Category How To

App Server 8 Admin console hangs throws Exception

After deploying System App Server 8, on Win2000 sp4 box, the following exception is thrown when trying to start the Admin Console
[#|2005-09-14T11:27:53.953-0400|SEVERE|sun-appserver-pe8.1|javax.enterprise.system.container.web|_ThreadID=10;|WEB0600: WebModule [/asadmin] failed to deploy and has been disabled: [java.lang.NoSuchMethodError: org.apache.commons.digester.Digester.setEntityResolver(Lorg/xml/sax/EntityResolver;)V].|#]
Can someone tell me what might be the cause of this exception?
Thank you.

Try asking the Customer to fire up the JNDI browser in the admin console and try to browse the JNDI tree.
What class is the InitialContext.lookup() happening in? Is that getting executed in the servlet class or a standalone client?
thanks.

VMM 2012 R2 Installing Admin Console Hangs (Gathering Required Information)

When I try to install the VMM 2012 R2 Admin Console on a Windows 7 machine with updated C++ redistributables, the install hangs on "Gathering required information." To Get a log I ran the MSI:
msiexec /package adminconsole.msi /log c:\temp\adminconsole.log
Here is the log:
=== Logging started: 1/21/2014 10:51:52 ===
Action 10:51:52: INSTALL.
Action start 10:51:52: INSTALL.
Action 10:51:52: FindRelatedProducts. Searching for related applications
Action start 10:51:52: FindRelatedProducts.
Action ended 10:51:52: FindRelatedProducts. Return value 1.
Action 10:51:52: AppSearch. Searching for installed applications
Action start 10:51:52: AppSearch.
AppSearch: Property: CREDSSP1VALUE, Signature: FindCredSSP1Value
AppSearch: Property: CREDSSP2VALUE, Signature: FindCredSSP2Value
AppSearch: Property: CREDSSP3VALUE, Signature: FindCredSSP3Value
AppSearch: Property: CREDSSP4VALUE, Signature: FindCredSSP4Value
AppSearch: Property: CREDSSP5VALUE, Signature: FindCredSSP5Value
AppSearch: Property: CREDSSP6VALUE, Signature: FindCredSSP6Value
AppSearch: Property: CREDSSP7VALUE, Signature: FindCredSSP7Value
AppSearch: Property: CREDSSP8VALUE, Signature: FindCredSSP8Value
AppSearch: Property: CREDSSP9VALUE, Signature: FindCredSSP9Value
AppSearch: Property: CREDSSP10VALUE, Signature: FindCredSSP10Value
AppSearch: Property: REGINDIGOPORT, Signature: FindINDIGOPORT
AppSearch: Property: MONADAPPBASE, Signature: MonadAppBaseRegistry
Action ended 10:51:52: AppSearch. Return value 1.
Action 10:51:52: ValidateProductID.
Action start 10:51:52: ValidateProductID.
Action ended 10:51:52: ValidateProductID. Return value 1.
Action 10:51:52: CostInitialize. Computing space requirements
Action start 10:51:52: CostInitialize.
Action ended 10:51:52: CostInitialize. Return value 1.
Action 10:51:52: FileCost. Computing space requirements
Action start 10:51:52: FileCost.
Action ended 10:51:52: FileCost. Return value 1.
Action 10:51:52: CostFinalize. Computing space requirements
Action start 10:51:52: CostFinalize.
Action ended 10:51:52: CostFinalize. Return value 1.
Action 10:51:52: ExecuteAction.
Action start 10:51:52: ExecuteAction.
Action start 10:51:59: INSTALL.
Action start 10:51:59: FindRelatedProducts.
Action ended 10:51:59: FindRelatedProducts. Return value 0.
Action start 10:51:59: AppSearch.
Action ended 10:51:59: AppSearch. Return value 0.
Action start 10:51:59: LaunchConditions.
Action ended 10:51:59: LaunchConditions. Return value 0.
Action start 10:51:59: SetAuthUsers.
Action ended 10:51:59: SetAuthUsers. Return value 1.
Action start 10:51:59: SetAuthPropertyName.
Action ended 10:51:59: SetAuthPropertyName. Return value 1.
Action start 10:51:59: TranslateUsers.
Action ended 10:51:59: TranslateUsers. Return value 1.
Action start 10:51:59: SetCountComponentClients.
Action ended 10:51:59: SetCountComponentClients. Return value 1.
Action start 10:51:59: CountComponentClients.
Action ended 10:51:59: CountComponentClients. Return value 1.
Action start 10:51:59: ValidateProductID.
Action ended 10:51:59: ValidateProductID. Return value 1.
Action start 10:51:59: CostInitialize.
Action ended 10:51:59: CostInitialize. Return value 1.
Action start 10:51:59: FileCost.
Action ended 10:51:59: FileCost. Return value 1.
Action start 10:51:59: CostFinalize.
Action ended 10:51:59: CostFinalize. Return value 1.
Action start 10:51:59: InstallValidate.
Action ended 10:51:59: InstallValidate. Return value 1.
Action start 10:51:59: InstallInitialize.
Action ended 10:52:02: InstallInitialize. Return value 1.
Action start 10:52:02: SetDeleteAddInsOldFolder.
Action ended 10:52:02: SetDeleteAddInsOldFolder. Return value 1.
Action start 10:52:02: DeleteAddInsOldFolder.
Action ended 10:52:02: DeleteAddInsOldFolder. Return value 1.
Action start 10:52:02: SetRenameAddInsFolder.
Action ended 10:52:02: SetRenameAddInsFolder. Return value 1.
Action start 10:52:02: RenameAddInsFolder.
Action ended 10:52:02: RenameAddInsFolder. Return value 1.
Action start 10:52:02: PublishEnvironmentVariables.

I am getting the same:
=== Logging started: 22/01/2014 18:11:20 ===
Action 18:11:20: INSTALL.
Action start 18:11:20: INSTALL.
Action 18:11:20: FindRelatedProducts. Searching for related applications
Action start 18:11:20: FindRelatedProducts.
Action ended 18:11:20: FindRelatedProducts. Return value 1.
Action 18:11:20: AppSearch. Searching for installed applications
Action start 18:11:20: AppSearch.
AppSearch: Property: CREDSSP1VALUE, Signature: FindCredSSP1Value
AppSearch: Property: CREDSSP2VALUE, Signature: FindCredSSP2Value
AppSearch: Property: CREDSSP3VALUE, Signature: FindCredSSP3Value
AppSearch: Property: CREDSSP4VALUE, Signature: FindCredSSP4Value
AppSearch: Property: CREDSSP5VALUE, Signature: FindCredSSP5Value
AppSearch: Property: CREDSSP6VALUE, Signature: FindCredSSP6Value
AppSearch: Property: CREDSSP7VALUE, Signature: FindCredSSP7Value
AppSearch: Property: CREDSSP8VALUE, Signature: FindCredSSP8Value
AppSearch: Property: CREDSSP9VALUE, Signature: FindCredSSP9Value
AppSearch: Property: CREDSSP10VALUE, Signature: FindCredSSP10Value
AppSearch: Property: REGINDIGOPORT, Signature: FindINDIGOPORT
AppSearch: Property: MONADAPPBASE, Signature: MonadAppBaseRegistry
Action ended 18:11:20: AppSearch. Return value 1.
Action 18:11:20: ValidateProductID.
Action start 18:11:20: ValidateProductID.
Action ended 18:11:20: ValidateProductID. Return value 1.
Action 18:11:20: CostInitialize. Computing space requirements
Action start 18:11:20: CostInitialize.
Action ended 18:11:20: CostInitialize. Return value 1.
Action 18:11:20: FileCost. Computing space requirements
Action start 18:11:20: FileCost.
Action ended 18:11:20: FileCost. Return value 1.
Action 18:11:20: CostFinalize. Computing space requirements
Action start 18:11:20: CostFinalize.
Action ended 18:11:20: CostFinalize. Return value 1.
Action 18:11:20: ExecuteAction.
Action start 18:11:20: ExecuteAction.
Action start 18:11:20: INSTALL.
Action start 18:11:20: FindRelatedProducts.
Action ended 18:11:20: FindRelatedProducts. Return value 0.
Action start 18:11:20: AppSearch.
Action ended 18:11:20: AppSearch. Return value 0.
Action start 18:11:20: LaunchConditions.
Action ended 18:11:20: LaunchConditions. Return value 0.
Action start 18:11:20: SetAuthUsers.
Action ended 18:11:20: SetAuthUsers. Return value 1.
Action start 18:11:20: SetAuthPropertyName.
Action ended 18:11:20: SetAuthPropertyName. Return value 1.
Action start 18:11:20: TranslateUsers.
Action ended 18:11:20: TranslateUsers. Return value 1.
Action start 18:11:20: SetCountComponentClients.
Action ended 18:11:20: SetCountComponentClients. Return value 1.
Action start 18:11:20: CountComponentClients.
Action ended 18:11:20: CountComponentClients. Return value 1.
Action start 18:11:20: ValidateProductID.
Action ended 18:11:20: ValidateProductID. Return value 1.
Action start 18:11:20: CostInitialize.
Action ended 18:11:20: CostInitialize. Return value 1.
Action start 18:11:20: FileCost.
Action ended 18:11:20: FileCost. Return value 1.
Action start 18:11:20: CostFinalize.
Action ended 18:11:20: CostFinalize. Return value 1.
Action start 18:11:20: InstallValidate.
Action ended 18:11:21: InstallValidate. Return value 1.
Action start 18:11:21: InstallInitialize.
Action ended 18:11:21: InstallInitialize. Return value 1.
Action start 18:11:21: SetDeleteAddInsOldFolder.
Action ended 18:11:21: SetDeleteAddInsOldFolder. Return value 1.
Action start 18:11:21: DeleteAddInsOldFolder.
Action ended 18:11:21: DeleteAddInsOldFolder. Return value 1.
Action start 18:11:21: SetRenameAddInsFolder.
Action ended 18:11:21: SetRenameAddInsFolder. Return value 1.
Action start 18:11:21: RenameAddInsFolder.
Action ended 18:11:21: RenameAddInsFolder. Return value 1.
Action start 18:11:21: PublishEnvironmentVariables.

Informatica Admin Console hangs on Creating repository service......

Hello Gurus,
For some time now I have been trying to create a repository service using the Informatica admin console after I have installed Informatica PowerCenter 8.6.1 server and applied the server HotFix 11. I do provide all the correct credentials for the connection to the DB, this is inferred from the process initiation of the creation. It is just now that the creation process gets initiated but doesn’t end. It keeps running with no end. The following are the account privileges granted to the repository user on which the Informatica repository should be created:
grant dba,connect,resource,select any table, create table,create view,insert any table,delete any table,update any table to infadb_rep;
Note that I have granted a dba privilege to the user as a precautionary measure. Yet, the creation process doesn’t conclude. I have also noticed that no tables, views, procedures not even any objects whatsoever were created on this user. But I have noticed that the user could not be dropped (i.e locked) if the Informatica service is up (that is being discovered after losing hope with the creation process and closing the admin console window).
I just wanted to also note that the whole system is a Virtual machine having Windows Server 2003 SP2, having Oracle 11gDB installed with two Network Adapters ( loopback adapter with static IP 192.168.100.100 and an additional Network adapter with DHCP IP assignment attribute set). Therefore, it is to be noted that addressing the machine usually is done by using the machine name “WIN2K3”. I hope any of these details does not introduce conflicts as a setting.
Would most definitely appreciate the help.
Thanks you very much in advance,
Hossam

I was able to get it working when I gave the following grants:
resource
connect
create session
create any table
drop any table
update any table
select on v_$parameter
create any directory
dba

Admin Console Hangs

Having an issue with a newly created domain. All seemed to be working fine, was able to setup and save all my managed servers and now the console just hangs when I try to activate any changes. It never crashes but never completes either. I had another domain that had this issue and had to recreate the domain. But this one is too new and should not have any issues. Memory and processes are fine and the machine is having no resource issues, looks to be strictly WL. Anyone have clues on what is the best way to troubleshoot this?

Just a follow up...I changed the admin mem arguments , registry params are now.... -server -Xms256m -Xmx768m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wlp1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie670\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Program Files\Documentum\dctm.jar;C:\Documentum\config;c:\documentum;c:\documentum\shared" -Dweblogic.Name=AdminServer -Dweblogic.management.username=beaadmin -Dweblogic.ProductionModeEnabled= -Djava.security.policy="C:\bea\WLSERV~1.3\server\lib\weblogic.policy" weblogic.Server
This is the same regsitry params I have on another environment I have had no issues with. When I just tried to make a small config change just now after these changes and a restart (changed number of logs to retain from 5 to 7) I get the console error below....ideas??? I can see how something might need more mem adjustment but how does it work fine and never crash on one environment and the other is instable and crashes?
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: java.lang.OutOfMemoryError: PermGen space
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
     at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
     at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
     at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
     at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
     at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
     at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
     at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
     at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
     at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
     at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
     at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
     at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
     at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54)
     at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3502)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2186)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2092)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.OutOfMemoryError: PermGen space
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at com.bea.staxb.runtime.internal.MarshalResult.addXsiNilAttribute(MarshalResult.java:158)
     at com.bea.staxb.runtime.internal.PushMarshalResult.writeXsiAttributes(PushMarshalResult.java:180)
     at com.bea.staxb.runtime.internal.PushMarshalResult.writeContents(PushMarshalResult.java:192)
     at com.bea.staxb.runtime.internal.PushMarshalResult.marshalType(PushMarshalResult.java:153)
     at com.bea.staxb.runtime.internal.PushMarshalResult.visitProp(PushMarshalResult.java:631)
     at com.bea.staxb.runtime.internal.PushMarshalResult.visit(PushMarshalResult.java:403)
     at com.bea.staxb.runtime.internal.ByNameRuntimeBindingType.accept(ByNameRuntimeBindingType.java:89)
     at com.bea.staxb.runtime.internal.PushMarshalResult.writeContents(PushMarshalResult.java:195)

Portal Admin Console hangs when trying to view the details Remote Producer

While trying to edit the details of a Remote Producer, the Portal hangs and will not let us edit or re-register the WSDL.
Any tips on how to get around this?

Try setting the timeouts:
http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/wsrp/workrem.html#999885
Nate

Admin defined roles in Web Admin

Looking to setup admin helpdesk rights in Web Admin so they can just Remove or Block devices under Mobility on a per user basis.
All I can find in the documentation is setting up additional Web Admins in the configengine.xml file.
Is there a way to give the limited rights?
Thx
Christa

Correct, you can add other admins, but there are no Role based
administration functions at this time, though I believe it is on the Road
map...
>>> On 3/5/2014 at 2:16 PM, in message
<[email protected]>,
laurabuckley<[email protected]> wrote:
> Hi Christa,
>
> I stand to be corrected on this, but as far as I know, access to the Web
> Admin console is an all or nothing story.
>
> I don't think that you can do graded authentication/roles based admin.
>
> Cheers,

Set Application Parameters link not activate under Web Admin Tasks of Admin

In the " How to do currency translation..." paper, there is a statement as following:
"The currency conversion business rules tables can also be activated by going through the web
admin parameters where the following parameter is set to u201C1u201D.
FXTRANS 1
However after I login to BPC Admin consol, I notice that Set Application Parameters link not activate under Web Admin Tasks of Admin Consol.
Where should do this? Should I do it under Set AppSet Parameters?

DFW,
In the non-web Admin Console, you should also be able to accomplish the same thing by going to the application, clicking "Modify application", then "Change application type", then "Modify Application", then choosing the "Currency Conversion" application option.
In general, this is how business rules can be turned on without messing around in the application parameters, and should really be the preferred method unless you have done some kind of customization that an application modification will interfere with.
Ethan

Tuxedo 12c r2 how to open admin console

Hai Mates,
I have installed oracle tuxedo 12c r2 but not able to start the admin console,if any one knows please inform.
thanks
Gautam.A

Hi Gautam,
If you are referring to old Tuxedo web admin console, I'm not sure what shape it is in as it has been effectively replaced by TSAM Plus. Few if any customers were using the web admin console and it had fallen behind in terms of more recent Tuxedo features. Most Tuxedo customers simply use the command line tools. Is there something specific you were looking for in what the web admin console provided?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Getting error in admin console when trying to expand web applications node

Hi
Thank you for reading my post
I get the folowing page as result when i try to expand the web applications node in application server admin console.
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'webApplications'"
The root cause is "com.sun.enterprise.admin.common.exception.MBeanConfigException: Component not registered"
See the HTML source for more detailed (stack trace) information.
what should i do ?
Thanks

Check this thread in the app server forum
http://swforum.sun.com/jive/thread.jspa?forumID=130&threadID=56332

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
Mangal

Hi Jim,
I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
Web Service & XML
http://myserver_url/admin/ManageResourceKey
<request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
<nonce>" . $nonce . "</nonce>
<expiration>'. $expiration .'</expiration>
<resourceKey>
<resource>resource_id</resource>
<resourceItem>1</resourceItem>
</resourceKey>
</request>
Error Message
<error xmlns="http://ns.adobe.com/adept"
data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
Magal Varshney

Web Admin Console Hanging

Similar Messages

Maybe you are looking for