Web admin pages

I'm wondering how I can find the ip addresses and if it is possible to deal with the web admin pages of the multiple routers,switches, and cable modem in my home network. I've got a cable modem plugged into a router which then goes to a switch as well as another wireless router. In the past I've been able to go to the web admin page for these devices but when they're all plugged in the only page I know of is my main router (192.168.2.1). I'd like to get to my modem and at least my other router.

Hi Spencer,
You can only get into them by directly connecting on most of them, but generally speaking, if you know the Brand/Model of these then you can look up the "Default" IPs online, like here...
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/

Similar Messages

Oracle XE production : web admin pages not localized

Hi,
I've just installed the production release (OracleXE latin1) on a french windows XP SP2. The product runs fine but the web admin pages and documentation are in english. The entries in the "start" menu are localized.
When I tested the last beta I noticed that the web admin pages were localized.
Is this an installation issue or a product issue ?
Thanks,
Jérôme

Hi Jérôme,
the announcement says:
Oracle Database 10g Express (Western European) Edition - Single-byte LATIN1 database for Western European language storage, with the Database Homepage user interface in English only.
Oracle Database 10g Express (Universal) Edition - Multi-byte Unicode database for all language deployment, with the Database Homepage user interface available in the following languages: Brazilian Portuguese, Chinese (Simplified and Traditional), English, French, German, Italian, Japanese, Korean and Spanish.
Thus you would need the Universal Edition for having a French user interface.
~Dietmar.

Robohelp 7 Web Admin

Hello,
I'm new to Robohelp 7 and I'm having a simply issue that I
can't seem to figure out. I'm running Robohelp 7 Server on Windows
XP Pro with IIS. The Robohelp 7 Server install was a success but
when I try to login to the web admin page, it asks for a username
and password.
During the installation of the Robohelp 7 Server, it never
give me the options of what username and password to configure.
Can anyone tell me how-to login to the web admin or tell me
where to change the values.
Another issue I'm having is in the Robohelp HTML editor. I'm
trying to connect to the server which is installed on the same
machine and it's giving me "Connection to Server Failed".
Can anyone tell me where to set the configuration or how to
connect to the server?
Thanks

No one have had this issue before? Please reply if you
do.

How to reload the WRT160N through the web admin interface?

I see no way to do this, which is strange. Is there a way to reset through the web admin page or did Cisco gaffe on this? Thanks!

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on "Administration" tab and click on Factory Defaults subtab and select Restore All Settings, this should reset your router to Factory Defaults...
Also you have a reset button next to the power cable, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

UCCE 9.0.1 CCE Admin Page not working

I have UCCE 9.0.1 and everything works fine except the cce web admin page. I manage to configure attributes and precision queues using cce admin page. But when I am trying to assign the attributes to an agent by clicking agent name, the page freeze by showing the "loading.... " message.
Anyone know how to resolve this .

There is a known bug on PCCE and UCCE when using the cceadmin page and having it timeout.
Please find in the following readme bug number CSCue95184.
(http://www.cisco.com/web/software/280840583/103560/Release_Document_1.html)
To resolve this issue you will need to apply ICM9.0.3_ES3 or later update.
(http://software.cisco.com/download/special/release.html?config=5ee578cbacd86d9ff938f48c3034e5a3)
**Note – although this defect is listed as PCCE, the component is shared between both PCCE & UCCE.
Yesterday installed 9.0.4 version - problem resolved.

WAP4410N - Problems logging in to web admin from Apple MAC

I recently installed a WAP4410N for a customer without any problem, but a few days later I received a call requesting assistance as the customer could not login to the web admin page.
The login screen was showing, but it wasn't acceptingthe username and password that I had set.
Today I visited customer to investigate.
I discovered that I could login without any problem using my Windows laptop, but that customer could not use any of their Apple MACs to login.
Apart from one Windows PC, all customer computers were Apple OS.
Customer could login using their Windows PC without any problem.
Can anyone advise a solution to this problem?
Thanks
Stephen Killen
www.premitel.com

Thanks Stephen
They were using Safari and Firefox does indeed work!
Thanks again for prompt response

Web based admin pages broken on Mac?

Have new WRT54GL v 1.1, 4.30.7 firmware.
I have noticed intermittent problems with the web-based admin pages, using both Firefox and Safari on the Mac. Odd bit is these don't happen all the time and I'm not sure yet what triggers the problems.
Most commonly seen in Firefox: On the page for basic wireless settings, drop-down menu for selecting the channel will not work. It will display the currently selected channel, but clicking on the menu will either not drop down at all, or it will drop down briefly with no channel selections visible.
In Safari: Many of the drop-down titles and item will shows the intended text prefixed with the word "Capture" or bracketed in "Capture(itemName)." I've seen a few variations on this. Also, many item titles and text are simply missing from many of the pages when viewed in Safari.
Questions (some rhetorical, some practical):
* Anybody else seen these or similar problems?
* Known solutions/work-arounds?
* Does this happen with any browsers on the PC?
* Is there something fundamentally wrong with how WRT54GL's scripting builds these user interface items - or is the problem more related to how the Mac browser handles the rendering?
-Lee

I don't have any problems with this firmware on my WRT54Gv2 using MacOS or Windows and any browser I have.
Those problems are usually either cache problems, i.e. there are some incomplete files in the browser cache.
Could be disabled JavaScript. (It is worth to check the JavaScript error log to see if there is problem)
Could be a hardware/memory problem. Sometimes this happens after a firmware upgrade which did not correctly go through. A re-flash of the same firmware could help then.
The Safari texts you see are normal. There JavaScript works a little different. I have the same on mine. (but I must admit I cannot tell you if I can configure the router with Safari as I have never tried it so far. I usually use only Firefox.)
You can try a PC and see if it is the same there. I guess it is.
Anyway, you are not alone with this problem. I would try to clear the cache, if that makes no difference, download the 4.30.7 firmware and re-flash the router. If that still makes no difference return it to the store if you can and get a replacement. You could ask them to hook it up there to a computer to see if it is any better there...

Blocking of Admin Pages on Web Server

I have two Apache servers acting as web servers for my portal application.
I want to block access to all the admin pages of Portal from one of them. The admin pages should be visible only from one of the servers where as the other pages should be visible on both the servers. Can you please tell how this can be done.

Which "admin pages" are you referring to?

Cannot access web integration server admin page

Hi guys,
1)After Installing 9iAS and setting up all the configurations needed to run the sample test page .jsp file from the web integration server i get the following error....YOU ARE NOT AUTHORIZED TO VIEW THIS PAGE.
2)What value to set for HTTP & HTTPS proxy under the URL-http://host_name.domain:5555 ?
3)I tried to change the port number of the HTTP LISTENER from inside the http://host_name.domain:5555 pressed OK.Now how to find the port number of he web integration server(previously it was http://host_name.domain:5555 but now the port number is changed without which i cannot login to the admin page of that server.)
Gimme a solution to these probs
Thanx in advance,

I am trying to access our Production Enterprise Manager for the 10g AS.
When I try to access it I am getting an error:
An error has occurred!
IOException in sending Request :: Connection refused: connect
So from the command line I check:
emctl status iasconsole and it says that
EM Daemon is not running.
So then I type: emctl start iasconsole and it says:
An instance of Oracle 10g Application Server control is already running
Do you wish to shut down first?
If I say no, the startup is aborted. If I say yes then:
The OracleOracle10gASProdASControl service is not started?
What the heck does that mean? The status shows the Daemon is not started, but when I try to start it, it says it is already running? Can anyone help?
Thank you,
Jeff

Online help doesnt work at web proxy admin pages

I logged in as admin to proxy admin pages. When I try to open online help, I get this error message:
Forbidden
Your client is not allowed to access the requested object.
host.demo.com - admin [14/Dec/2006:11:26:02 +0100] "GET /manual/ag/agapuirf5.html HTTP/1.1" 403 134
Anyone can help me?

Check the <server install dir>/proxy-admserv/config/obj.conf file
There is a line like this:
NameTrans fn="pfx2dir" from="/manual" dir="/path/to/proxy//manual/proxy"
// (double slash) somewhere in the path is a possible cause of the problem.
correct the line like this:
NameTrans fn="pfx2dir" from="/manual" dir="/path/to/proxy/manual/proxy"
and restart the admin server
hope this helps

SG 300 web admin interface does not display properly

Went to log into the web admin interface on my SG-300 today and I get this in both IE and Firefox:
I'm not able to login by typing user/password and just pressing enter. I've tried power-cycling the switch, and this didn't help, however, since the power cycle, the font-panel system LED has been blinking green. I seem to recall, though I can't locate the reference now, that this means the switch is running with factory settings, but that cannot be right because:
1. I had previously saved a new configuration on the switch, which it should be using now.
2. It is answering on the configured non-factory IP address -- just not rendering the web admin interface successfully.
I've had this unit for approximately a month. This is not the first issue I have had with this unit (see:
https://supportforums.cisco.com/message/3486734) and I'm experiencing some strange LAN speed issues since I installed it. Do I need to RMA this thing?

Hi Lamont
There was a issue and work around for a issue with IE in the release notes, it may be relevant to you.
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/release_notes/Sx200-Sx300_R1.1.1.8.pdf
Problem: Some WEB GUI pages require full version compatibility of JRE, Browser and JRE-Browser applets. For XML compatibility reasons, MSXML DLL Version 6 is required for IE browser users.
Solution: For download and installation please refer the following link: www.microsoft.com/downloads/details.aspx?FamilyID=993C0BCF-3BCF-4009-
BE21-27E85E1857B1&displaylang=en
This may or may not be relevant to you. I would like to think that you are using 1.1.1.8 ?
If you really are experiencing some weird problems , why not get the product verified by the Good folk at the Small Business Support Center.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Regards Dave

Garbage characters in german admin pages after update to 3.0

After Update to 3.0 there are garbage characters display instead of German special characters (äöüß ...)
looking like ... " lÃ¶schen " or "UnterstÃ¼tzende Objekte"
In the applications these characters displayed correctly -even the Buttons ... - only Apex Admin Pages affected.
I have checked Frequently Solved Problems/FAQs with Application Express 3.0
and updated PL/SQL Web Toolkit to 10.1.2.0.6 and checked NLS_charset - is right.Then I've run the load_de Script again. But noting changed.
DB 10.1.0.3 on SLES9 SP3, NLS_CHARACTERSET WE8ISO8859P1
9.0.4 Oracle-HTTP-Server
Any Ideas?
regards
Ralf

and again missunderstood ;-)
begin owa_util.print_cgi_env; end;
=
PLSQL_GATEWAY = WebDb
GATEWAY_IVERSION = 3
SERVER_SOFTWARE = Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server
GATEWAY_INTERFACE = CGI/1.1
SERVER_PORT = 7780
SERVER_NAME = los-bd4.intranet.l-os.de
REQUEST_METHOD = POST
PATH_INFO = /wwv_flow.show
SCRIPT_NAME = /pls/htmldb
REMOTE_ADDR = 10.220.110.200
SERVER_PROTOCOL = HTTP/1.1
REQUEST_PROTOCOL = HTTP
REMOTE_USER = HTMLDB_PUBLIC_USER
HTTP_CONTENT_LENGTH = 297
HTTP_CONTENT_TYPE = application/x-www-form-urlencoded
HTTP_USER_AGENT = Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.8.1.3) Gecko/20070309 Firefox/2.0.0.3
HTTP_HOST = 10.220.110.22:7780
HTTP_ACCEPT = text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
HTTP_ACCEPT_ENCODING = gzip,deflate
HTTP_ACCEPT_LANGUAGE = de-de,de;q=0.8,en;q=0.5,en-us;q=0.3
HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.7
HTTP_REFERER = http://10.220.110.22:7780/pls/htmldb/f?p=4500:1003:2050165973690504::NO:::
HTTP_ORACLE_ECID = 1177512000:10.220.110.22:2296:0:624,0
WEB_AUTHENT_PREFIX =
DAD_NAME = htmldb
DOC_ACCESS_PATH = docs
DOCUMENT_TABLE = wwv_flow_file_objects$
PATH_ALIAS =
REQUEST_CHARSET = AL32UTF8
REQUEST_IANA_CHARSET = UTF-8
SCRIPT_PREFIX = /pls
HTTP_COOKIE = ISCOOKIE=true; ORACLE_PLATFORM_REMEMBER_UN=MERKER:zentral; WWV_FLOW_USER2=5352414403960629
Anweisung wurde verarbeitet.

Unity Connection 8.5.1 ES 16 web admin account recovery

Hello,
I have a client with a Unity Connection 8.5.1 ES16 version and they lost access to the Unity Admin web page.
I tried the steps to recover the password but it is failing, and the account doesn't seem to exist anymore.. I did a SQL query I found on another post here and it did not list this account anymore in the nonsubscriber querry, I also tried the utils cuc reset password command on the account several times with several passwords that matched the password criteria and they always failed resetting the password.
So I found another post and it had other query to use nonsubscriber account and use that, I managed o log in to the unity admin page with account called "UnityConnection" but it saids "Not Authorized" for all functions.
How do I add rights to the UnityConnection user or create another web admin account from SSH/CLI? I'm thinking I need to engage TAC in the morning and have them gain root access to fix this up. I did find a few bug ids on this but the workarounds don't work either and those were for 7.1.x.
Thanks, Erick

I was hoping not to have a Nested ESXi setup, initially I started to setup my Lab machine as a Bare Metal ESXi host, the free ESXi vsphere client has a 6 Core Limit per CPU and I have 2 CPU's with 8 Core's each and was not happy to lose 2 Cores per CPU as a limitation, so I read up and tried ESXi 5.0 which really messed up things for me, after ESXi 5.0 install My system started to act up and would boot up and sit at a Blinking Cursor forever, spent a week researching and gave up when I tried installing 4.1 again only to find out 4.1 would work either ! sucked real bad and I guess I just decided to give Workstation a try, minor glitches, But I will give it a try and setup a nested ESXi within my workstation, I know it has something to do with the OVA template and the Hardware specs that Unity Connection looks for, crazy thing is Unity Connection Works right now, I just have to start Tomcat manually everytime I boot up my lab system. Will keep looking for answers will I try the nested setup - Thanks Matt

Unable to Access Router Admin Page

So I have a weird situation where my router is working fine to allow me access to the internet, yet I am unable to access the router administration page, 192.168.1.1 This occurred after the router froze up tuesday. I reset the router to factory defaults and have since been able to get online, but not access admin page. Router is a Linksys WRT-54GS V 7
Modem is motorolla SB1505
ISP is earthlink, but in NYC so its actually off the Road Runner network. Cable connection obviously. - I attempted to access 192.168.1.1 with both Mozilla Firefox and IE 8. FIrefox gives an "Unable to connect" error message. IE 8 redirects me to search engine results (yahoo in this case).
-Ipconfig confirms default gateway and DHCP server is 192.168.1.1, subnet mask 255.255.255.0
- I am able to ping the router with <1ms times.
- I have tried resetting router to defaults again, but same issue occurs.
- I am able to get online and access web pages, etc.
- Tried resetting up the router using the Linksys setup program, but it error every time saying "please connect router for broadband"
- Router worked fine with me able to access admin page until it froze up yesterday.
- Wireless works fine. Though the network is unsecure atm, since I can't access router admin.
- I've also tried disconnecting all other devices from the router except my computer and modem. Still wont let me access router. System is running windows 7 PRO, fully updated. However, I can't access the router either on 2 other computers at home which run windows XP PRO SP3. System Specs CPU: Intel i5 running at stock speeds
Mobo: Gigabyte P55-UD4P
Ram: Gskill Ripjaw, 4 gb DDR3-1600 7-7-7-21
HD: Intel X-25 M 80 gb G2.
PSU: Corsair CMPSU 750 TX
GPU: Diamond ATI 5850 Anyone have any ideas on whats wrong here? Did i miss something obvious? Would greatly appreciate any help as having an unsecure wireless network in the middle of NY isn't the best idea. Thanks!
Message Edited by Banthracis on 11-06-2009 04:25 PM

I am once again unable to access the on-line Router admin page. When I use the EasyLink Advisor and click ADVANCED settings it pulls up the browser but goes nowhere. If I type in the address directly it does the same thing. The address I'm typing is correct. I know because if I unplug the router for a minute, I can get on using the EasyLink or entering the address directly into the browser. Then I sign in and can access the pages.
Why do I have to keep resetting the router to access the router admin pages? It doesnt matter about virus protection, firewall, what version of Windows I'm using, what browser I'm using...the only thing that matters is resetting the router.
And now I have a new problem. When I attempt to go online with my new netbook, it causes my wired-to-the-router desktop to loose the connection, even though I reset the router and "added it as a new device".
I was using Homegroup to access the netbook the first day I got it. Now I cannot access the netbook or the network from the netbook, without resetting the stupid router every single time. I am not using mac address filtering and have the router set to allow 9.
Getting fed up with this router and I never get an answer from Linksys as to why I can never access the router admin pages without resetting the stupid router.
I can get the netbook on other people's wireless networks (using their password) but cannot get onto my OWN using my password.
Does anyone have any ideas? I'll try anything before yanking this thing out and buying a different brand of router. Yeah I'm mad, sorry.
Wired desktop Windows 7 Home Premium 64/IE8/using Windows firewall and MS Security Essentials. Netbook is W7 Starter, Norton Internet Security 2010. But none of this matters. Because I had the same problem with this router using Vista64, IE7, no firewall, no a/v, IE32 & 64 bit...all those variables yet the only thing that works is resetting the router.
SO WHAT DOES MATTER? Help me before I trash this thing please.
mlure

WRT54GS Connects to the Internet Not Admin Page

I am able to connect to the internet with the WRT54GS and was able to access the admin page, but now all I get is "Page Can Not Be Displayed". I powered everything off and than turned on the broadband DSL modem, the router and than the PC but still can't get the admin page to load. I am using Windows XP. Can someone please help. Thanks in advance

What is the Ip of your DSL modem? is this the same as your WRT54GS perhaps?
have you setup a proxy cache in your web browsers LAn settings perhaps?
any antivirus/web scanning or firewall utils that are blocking it?
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

Web admin pages

Similar Messages

Maybe you are looking for