Web Analysis and Planning smart lists

Hi,
Does anyone know whether Smart Lists can be used in Web Analysis reports?
I dont think this is possible since you can only connect to an Essbase data source in Web Analysis.
Thanks for your help.
Regards,
Seb

Seb,
Did you figure this one out? I am trying to use Smart Lists in Web Analysis and cannot seem to create a planning connection.
Thanks,
Neha

Similar Messages

Error when opening workspace, web analysis and shared services

Hi All,
We installed hyperion 11.1.2, Essbase on a AIX server, with reports etc on a windows 2008 server. when logging onto workspace, web analysis and shared services i get the following error message:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If we re-start the server it sometimes work, but in the morining we have the same issue, can anyone help.
Thanks
Dylan

Hi,
Restart the services. Issue with Oracle Http server. If you restart foundation and other services I can bring workspace up.
Thanks
Radhika

Differences between Hyperion Workspace, Web Analysis and Financial Reportin

Hello,
Can anybody explain me the differences between Hyperion Workspace, Web Analysis and Financial Reporting?
Thank you

In real simple terms....
Financial reporting - Perfect for producing standardised monthly reporting such as P&L, balance sheets etc. Highly formatted, print well in PDF format.
Web Analysis - Highly graphical, web based analysis tool more suited to dashboards, pinboards etc with slice and dice capability.
Workspace - Common environment where reporting content in deployed. Users can access web anlysis, fin reports, Interactive reports plus other content through the workspace. It was the start of the 'log on to one place for all reporting' concept instead og logging on to multiple products.
Hope that helps
Regards
CD

Web form doesn't allow text entries and showing smart lists

Hi,
I am using Hyp 11.1.2 and facing 2 issues with webforms .
One of them is a cell under Account dimension should accept Text Value , which is allowing numeric only. I am able to enter text but not getting saved , showing an error msg that invalid entry..etc. Also I found everymember in outline is numeric. Even if I refreshed the Text type member with data type Text , it is still showing numeric in Outline.
Second one is even If defined a smart list on another member under Account, the cell is not showing it.
Is it relevant setting Evaluation Order or any thing else?
suggestions appreciated
Thanks in advance

The Text member like Smart List will be based on the evaluation order which for Classic is set by carrying out the following - http://docs.oracle.com/cd/E17236_01/epm.1112/planning_admin_11122300/enum_dim.html for EPMA - http://docs.oracle.com/cd/E17236_01/epm.1112/epma_admin/epma_data_type_eval.html
Checking the Essbase outline is not an option because the text information is all stored in the planning relational repository (table HSP_TEXT_CELL_VALUE) and the numerical value associated with it is stored in essbase.
Cheers
John
http://john-goodwin.blogspot.com/

Web analysis and attributes No.2

Hi,
When doing report in web analysis as admin for my users I select my attribute dimension instead of entity (i think that when it is assigned to entity it shall has the same function as entity being chosen, right?). The numbers, percentages fits perfectly. But when my user logs into workspace and open a report there is NO DATA. I even tried the essbase filters and add manually (Read - @IDES(HSP_RATES), @IDES(Attribute_Dimension) as i thought this can be a problem) But it is not.
My users has access to all dimensions and members selected in reports.....
Please, Any idea of what ca be wrong? I really need some help
Thank you very much again
lubos

Hi lubos,
check if is there any multiple filters assigned to the user. if security overwritten happens he can not access the data.
Kiran

Security settings for web analysis and finacial reporting

Hi
Would anyone be able to let me know when I am creating a group/user within Shared Services what provisioning I need to set up so that the user can create there own reports using finacial reports and web analysis.
Also If a user is to just refresh reports but cannot change them what access do they need?
Thanks

Hi,
Have a read here :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security_11111/apas04.html
It should have all the information you are after.
Cheers
John
http://john-goodwin.blogspot.com/

Disappearing of Web Parts and a custom List Views containing XSL

Hello!
Recently, on the sites with Web Parts
containing XSL or on List Views (.aspx-pages) containing
XSL a message appears:
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Correlation ID:98bcff3d-5cc0-42b6-819c-41d36a4aa335
And so it is as long as I do not take
certain actions: indicated below as I
struggled with this. In a day or two it
repeats.
Web Parts and List Views without XSL
are displayed normal.
Related LOGs for such Web Parts and List View containing XSL:
Error while executing web part: System.IndexOutOfRangeException: Index was outside the bounds of the array.
at Microsoft.Xslt.MethodCollection.ResolveMethodDef(Int32 tokenNum)
at Microsoft.Xslt.MethodCollection.GetMethodInfo(Int32 methodNumber)
at Microsoft.Xslt.STransform.GetCompiledTransform()
at Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
Herewith:
1. Updates have been installed on the server
with a further rebooting.
2. No doubt the correctness of XSL:
previously these web parts and list views were displayed.
And it is displayed in SP Designer.
My actions for troubleshooting (a day or two
it reappears):
For Web Parts containing XSL:
- Server rebooting does not help.
- Resaving of Web Part settings
helps (Web Part menu -> Change Web Part -> OK).
- Sometimes resaving of Web Part settings does not help. In this case restarting of Application Pool 'SharePoint - 80' with further
resaving of Web Part settings helps.
For List Views containing XSL:
- Server rebooting does not help.
- Server updating with futher rebooting
helps.
- Restarting of Application Pool 'SharePoint - 80'
helps.

Hi,
According to your post, my understanding is that Web Parts and List Views with XSL were displayed unnormal.
The error message is caused by that the time allowed for doing the XSL transformation was exceeded.
In SharePoint 2010 the XSL transform cannot take longer than 1 second.
There is now a hot fix available from Microsoft to resolve this issue, the solution are at this page:
http://support.microsoft.com/kb/2639184.
In addition, you can install sharepointfoundation2010-kb2597136-fullfile-x64-glb.exe and use the PowerShell
script below to make the change to the Timeout value
If the issue still exists, you can perform an AppPool recycle in IIS.
More information:
http://englando.wordpress.com/2012/01/05/unable-to-display-this-web-part-xsltlistview-and-xsltdataview-web-part-issues-in-ie/
http://hsdhaarsma.blogspot.in/2013/06/indexoutofrangeexception-in.html#!/2013/06/indexoutofrangeexception-in.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Java Web service and dynamic entry list

Hello,
In my VC mode, I have a combo box with a dynamic entry list. This entry list call a web service function which the source is :
public EntryListBean[] getEntryList() {
          EntryListBean[] liste = new EntryListBean[2];
          liste[0] = new EntryListBean();
                liste[0].setText("1");
          liste[0].setValue("Liste 1");
          liste[1] = new EntryListBean();
                liste[2].setText("2");
          liste[1].setValue("Liste 2");
          return liste;
In output port, i have:
VALUE -
> @value
TEXT    -
> @text
When i test this function with 'Test Data Service', it work but when i deploy the model, there is nothing in the combo box. Do you have the same problem ?
I have installed NWDW v7.0 SP9 with Visual Composer patch 2.
Regards

Hi Francois,
Did u try using dynamic entry list with a BAPI. Is that working fine?
Actually, I faced the same problem. I used a drop-down list, in which dynamic entry list works fine in case of a BAPI and appears blank in case of a webservice. I applied the latest patch files mentioned in a SAP note. People in forum asked me to do that. Its mentioned in the note that, "Dynamic entry list with webservice bug is fixed in the released patch file". But even after applying the latest patch files, it did not work for me. So, i think this bug is yet to be fixed.
Regards,
Kavitha.

Web Analysis and HFM : show Current Month

Hi,
I tried to create a table which displays only figures coming from HFM and related to the current month.
In fact, I created a table which is populated with HFM data.
This table has only one column : "June", which is the current month.
What should I do to have automatically "July" the next time I open it if the current month is July ?
Thanks for your help folks,

Hi,
This can be achived,but little bit tedious process...
Create an intermediate report with three columns.
first column : Monthcolumn,which you are using in prompt.
Second column :This column is for selected month
Try to convert Jan 2012 to 201201,Feb 2012 to 201202...This can be achieved by writing a case statement like below
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)
Third column:Prior month
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)-1
Now add the same column formula to the main report and hide it(let's say column name will be "HIDED")
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)
Now you can apply filter based on another request on the hided column.
HIDED<=Second column in intermediate report.
HIDED>=Third column in intermediate report.
Now you will get the desired reults in your report.
Hope this helps.
Thanks,
Pramod.

Web Analysis and RSS Feed

Does WA support insertion of an RSS feed into a document? I have tried to do this through the Services button "Launch External Browser" but it locks up WA.
We are using WA 9.3.01
Any other ideas are appreciated.

Hi lubos,
check if is there any multiple filters assigned to the user. if security overwritten happens he can not access the data.
Kiran

Hyperion Web Analysis vs Financial Reports Pros and Cons

Hi All,
Can you pls. let me know what are the major differences between Hyperion Financial Reports and Hyperion Web Analysis ? For Planning application we generally use Financial Reports right ? Can't we use Hyperion Web Analysis ? What are the advantages & disadvantages of both FR & Web Analysis tools
My Customer is asking the Merits and De merits of using both FR & Web Analysis tools for Hyperion Planning. Pls. help
Thanks,
PVR

Hi John,
I'm using FR extensively now and used Web Analysis before. We use FR for Good formatted Reports, where as Web Analysis we use for adhoc Reporting Purpose. users can do slicing/dicing, Drill down/up in Web Analysis Reports, where as this feature is not available completely in FR
We use FR for Planning right ? What is the main advantage of using FR over Planning ? I belive with Web Analysis over Planning may cause performance issues
Thanks,
PVR

FR and Web Analysis reports will not run in workspace

I have configured both FR and Web Analysis and then re-configured workspace to pick them up. 'Reporting and Analysis shows up in my foundation metadata under workspace. All my related ports are enabled.
Database connection manager, import financial reporting reports, preferences financial reporting, tools/link to web analysis, do not appear in workspace.
get 'required application context analyzer is missing. please contact your adminstrator.' error when try to run a web analysis or financial reporting report from workspace.
Web analysis as a client with reports is working fine.
Financial reporting allows me to create a database connection, create a report, pdf preview from the client but web preview breaks with generic page not found error.
Any suggestions would be most appreciated.

Hi,
You can use panel while creating reports and put all the graphs on it .
Panels color can be changed.
Thanks
Yashwant

Wrting back in IR and web analysis

how do you write back in web analysis and Interactive reporting to the database

You can use Web Analysis to write back to Essbase as long as the user has access and the intersections you are writing to are editable (not a calc, etc).
To do this you can access the 'Edit Data' feature from the right click menu or you could put a 'Services' button on the report/dashboard so the user doesn't have to go to the right click menu.
There are two types of Edit Data service buttons. One is a normal Edit Data button which will edit whichever data object (i.e. grid, chart, etc) is "in focus" or has been selected. The 'Assign Edit Data' button allows you to pick which data source the Edit Data will be assigned to ahead of time when setting up the button.
You will have to test these in the Workspace, though. I don't think the Edit Data buttons were supported in the Workspace; however, I hear that in 9.3.1 they are now.

Hyperion Web Analysis vs Financial Reports

Hi All,
Can you pls. let me know what are the major differences between Hyperion Financial Reports and Hyperion Web Analysis ? For Planning application we generally use Financial Reports right ? Can't we use Hyperion Web Analysis ? What are the advantages & disadvantages of both FR & Web Analysis tools
Thanks,
PVR

In a nut shell Hyperion Web Analysis is useful for reports having user drill downs. The end users will have the capability to drill down and select member from different Point of Views.
Financial Reports can be used for regulatory reporting and reports in standard format.
You can create reports in both Financial Reports and Web Analysis from Planning based on your requirement.
Please read the documentation for more information on the differences between the two products.
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

Export to Excel in Web Analysis

We are in the process of upgrading to Web Analysis (and the rest of the products for that matter) 11G and we're having an issue when someone tries to export to excel. It pops up and wants the user to drill down to excel.exe so it can launch excel and open the report.
Has anyone seen this before? If so what is the resolution?
I know there was a config fil in Analyzer 7 that we had to update a excelpath variable, but I don't see anything similar in 11g and I can't find a good admin guide for Web Analytics 11g.

With System 9 and SmartView you also have the option to Export to Excel in
Query Read - preserves its connectivity
Fully Formatted - preserves its formatting.
Brian Chow

Web Analysis and Planning smart lists

Similar Messages

Maybe you are looking for