Web Analysis report is not coming with the border/logo/heading while print

Hi All,
I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
So please suggest us with a resolution to have border, logo and heading, while using Print all object.
Thanks with regards....
Rao

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

Similar Messages

The creditors report is not matching with the G/L account

Hi Gurus,
The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
Please give me advice,
I will assign points
Thanks&Regards,
Kumar

Hi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks

FR and Web Analysis reports will not run in workspace

I have configured both FR and Web Analysis and then re-configured workspace to pick them up. 'Reporting and Analysis shows up in my foundation metadata under workspace. All my related ports are enabled.
Database connection manager, import financial reporting reports, preferences financial reporting, tools/link to web analysis, do not appear in workspace.
get 'required application context analyzer is missing. please contact your adminstrator.' error when try to run a web analysis or financial reporting report from workspace.
Web analysis as a client with reports is working fine.
Financial reporting allows me to create a database connection, create a report, pdf preview from the client but web preview breaks with generic page not found error.
Any suggestions would be most appreciated.

Hi,
You can use panel while creating reports and put all the graphs on it .
Panels color can be changed.
Thanks
Yashwant

I am not satisfied with the font and size of print that I set. How do I change it?

When I first set up Firefox on my desktop, I set the print size and font. I have found that it is too large and I really would like to change the font, also. I can't find a spot to do that. I might be looking right at it but don't realize it. Could you help me?

I can't remember what I did when I set the font and size of articles that I printed from the pages on Firefox. I just know that I tried something a few months ago and have not been happy with the settings that I made. I can't find anywhere to change those settings and have tried so many things but they do not change the look of the pages I print when I click print. I tried to see if I could change the settings but all it does is change portrait or landscape and margins...nothing about fonts or sizes. I am getting so frustrated even though I love Firefox.

ID & password is NOT working with the Menu Bar CC icon

ID & password that I use for the Adobe CC web page login is NOT working with the Menu Bar CC icon (Mac OS 10.10.2). I have two updates to download, but the ID and/or password is rejected. Also the the "Hint" field is blank.https://forums.adobe.com/discussion/create.jspa?containerType=14&containerID=4670&question =true&subject=ID+%26+password+…

If the is prompts like Creative Cloud wants to make changes to system : Please enter Mac username and Password.

Issue while opening the web analysis reports

Hi,
One of our user is not able to open a web analysis report with an error messages saying
"Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
"Document does not exist or no authorization to open the document"
Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
What could be wrong? Any suggestions please.
The only thing I see here, something wrong with userd ID or password.
Thanks
Prasad

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Error Launching Web Analysis Report from the Hyperion Workspace

Hi Everyone
When launching the report as a HTML from the Workspace, the output flashes briefly on screen
The view in the content pane disappears to leave a blank screen.
When I Select View | Refresh. The following result is returned "Web Analysis Information" -1
I have set the report in start up preferences. And Web Analysis preferences set to open as HTML
After logging on again the following error is shown " An attempt to open "Actual vs Budget" Failed
Show Details displays: this.getFocusRoot() is nullor not an object
The reports all display correctly when launched from the Web Analysis studio
Any ideas will be greatly appreciated
Thanks
G
Web Analysis Version
Server Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Server VM
VM Version: Java HotSpot(TM) Server VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_11
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 66519040
Free Memory: 22975320
Locale: English (United States)
Client Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Client VM
VM Version: Java HotSpot(TM) Client VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_12
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 34766848
Free Memory: 10688504
Locale: English (United States)

Hi Ian,
Thanks for the advise but I have looked into your possible solution and referred to the Web Analysis user guide. I have a number of reports and when selecting the Design for HTML option - a number of objects are valid and should be displayed in the workspace.
After creating reports from scratch - with valid objects - the problem still persists.
Unfortunately, I don't think this provides a solution to the problem.
Cheers
G

Data not exist for member combination in web analysis report

When I run the report in web analysis studio iam able to find the data for a particular member combination.When I try to run the same report in workspace iam not finding any data for same member combination.Can U please help me to resolve this issue

Hi Swetha,
You must've realized that- Even if you select only the desired members, you end up being able to drill-down unwanted members. Correct ? :)
The only way, I believe, is- To create a users' group at your Data source side, perhaps, Essbase & provision this new group with a Metaread filter which prevents him/her from Drilling down to the leaf node.
PS: Giving Read access might also let the user not see the data for children. But, if you want to hide the members also, Metaread+ is the way to go.

Web Analysis reports charts are not visible in work space

Hi All,
I have created couple of reports in web analysis 11.1.1.3 with charts embeeded in that reports and when i open the same report in the workspace iam not able to see the chart.
If any one have faced this issue give me an idea .
Following are the logs
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795266678" level="ERROR" thread="TP-Processor3" sequence_no="13">
<time>09 Nov 2009 12:34:26,678</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795329303" level="ERROR" thread="TP-Processor3" sequence_no="14">
<time>09 Nov 2009 12:35:29,303</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795332502" level="ERROR" thread="TP-Processor3" sequence_no="15">
<time>09 Nov 2009 12:35:32,502</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795337055" level="ERROR" thread="TP-Processor3" sequence_no="16">
<time>09 Nov 2009 12:35:37,055</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
Thanks,
Ram

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

How to arrange page dropdowns in the Web Analysis report

Hello, Experts!
I have created a Web Analysis document based on my Esssbase cube. This document contains just one grid with 7 dropdowns. All dropdowns are in one line above and they are narrowed so as they all fit into 1 line within the screen and I cannot see the full names of members within a dropdown. So I need advice on how I can arrange the dropdowns in my Web Analysis report so that I can see the full names of members when opening the dropdown? Thank you so much!

Thanks a lot! Yes, it works if one creates dropdowns via combo box controls attached to the same data source as the spreadsheet and applying these controls via the service button control (in this case you do not create page dropdowns in the data layout window of the spreadsheet and leave them in the data layout window's Filter pane). Otherwise it is impossible to edit the size and position of page dropdowns created in the Data Layout window of the spreadsheet.

Not able to open web analysis reports after upgradation

we have upgraded Hyperion 11.1.1.3 to 11.1.2.2 version, after this process we are not able to open web analysis reports
These reports are still pointing to old servers so, how to edit this database connection details in the new version??
Edited by: 1007326 on May 22, 2013 3:29 AM

Hi,
Welcome to Forums...!
I think we need to change the database connection details in the Web analysis.
goto file --> Edit --> browse the database connection then change the server name in the connection details.
may be this will help to resolve your issue.
Thanks,
mady

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

Error while opening the web analysis reports.

Hi,
Whenever i am trying to open any web analysis reports i am getting the error message as "error occurred while opening document. document Id={0}. Is anyone have any idea about this issue.
Thanks & Regards
Ekta

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!

Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

Web Analysis report is not coming with the border/logo/heading while print

Similar Messages

Maybe you are looking for