Web Analysis, Smart View Bandwidth

Hi Guys,
I have the unusual urge do find out about the bandwidth that is actually used by web analysis or smart view when using it remotely off site.
Well, I guess its impossible to tell, depends on the data set.
Small (less than 10 rows, 10 columns)
Medium (less than 80 rows, 20 columns)
Large Medium (less than 160 rows, 30 columns)
Any suggestions or experiences to share ?
Thanks.

32Byte ping to www.google.com takes an average of 53ms
(IEEE notation: kilobyte = 1000 bytes)
32MB = 32000 KB
32 Byte = 0,032 KB x 1 000 000 = 32 MB
53 MS x 1 000 000 =53 000 000 MS = 883 Minutes = 14 Hours
/ 8
4MB = 1h and 45 Minutes
2MB = 52 Minutes for 2 MB of Smart View or Web-Analysis Data

Similar Messages

  • Smart View Vs Web data form entry

    Hi
    I am currently developing a planning model that is due to be rolled out a number of non finance users.
    I find entering data on a web form quite time consuming and not very user friendly. For example when scrolling across left to right the screen doesnt automatically scroll with you.
    I have seen that on smart view data can be entered on a form using excel however the worry is here various spreadsheets could be saved all around the place losing the benefit of entering the data in one source.
    Has anyone had any experience of rolling out smart view to non finance users?
    Thanks

    We're just about to roll out an application with and have demonstrated both the Web Forms and Smart View methods of submitting data. Most of the data will be consolidated using various offline spreasheets so the desire for our users is to copy and paste large blocks of data rather than enter them directly onto the Web Forms/Smart View forms. Some of our forms have 100's of rows so for this reason Web Forms aren't really an option given the time it takes to copy and paste a block of data from spreadsheet A to Web Form B. The difference was 1 minute (spreadsheet>Web Form) vs 1 sec (spreadsheet > Smart View Form) for some forms.
    As soon as we demoed both methods, this was confirmed, the users started to think of ways they could link their backend spreadsheets to the Smart View forms for ease of submitting data. Early indication is that most users will save a copy of their relative forms on the local machines as a template. They will then use this template to consolidate the data from the external spreadsheets offline. Once they are ready to submit, they intend to copy the whole block from the template into a fresh retrieve of the form for submission.
    We haven't looked into offline forms due to the concerns we had with users creating links between the offline form and multiple external spreadsheets. We're just not sure at this point whether it is possible or suitable. It is very unlikely that any values will ever be keyed directly into the form.

  • Not able to export web analysis report to excel smart view from workspace

    Not able to export web analysis report to excel smart view from workspace.
    Error :Web launch operation has been cancelled.
    Can anyone help me to resolve this issues

    I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
    My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
    @Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

  • Drill-Through Error Smart View And Web Analysis

    Hi,
    After upgrading to Hyperion 11.1.2.1 , I get below error for drill through define from EIS. I get error when performing drill through from Smarview and Web ANalysis.
    Error :- [1033] Native: 4006 Error: Internal Essbase JAPI error: [Cannot perform cube view operation. Essbase Error]]; nested exception is:
    com.hyperion.ap.APException: [1144] Error

    Hi
    thnaks for your replay it helped me in sloving the SV issue now the Drill through is working fine ffrom SV to FDM,
    but now the problem is with FR, we are not able to do the drill through from FR to FDM,
    can you please suggest any solution for FR also it will be a grt help...
    Thanks again for your help
    Regards
    Sri..........

  • Can't load data through smart view (ad hoc analysis)

    Hi,
    There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
    EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

    I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
    Check in EAS whether those filters are created with "Write" permissions.
    Regards
    Celvin
    http://www.orahyplabs.com

  • How to see Shared Members in Smart View on Ad-hoc Analysis mode

    Hi All,
    We are using Hyperion Planning v 11.1.1.3.
    For the alternate hierarchy we have created shared members. But in Smart View we are unable to see Shared members hierarchy in Ad-hoc analysis mode.
    Is this limitation in Hyperion Planning?
    Or
    Is there any way to see shared members Hierarchy in Smart View in Ad-hoc analysis mode?
    It is urgent requirement Please let me know as early as possible
    Thanks in Advance!!!

    When you say open data form in Ad-hoc mode, can you do that? I think when you select Ad-hoc mode, you are basically connecting to Essbase and therefore need to manually select the members. (of course, I've got a 11.1.2 env right now so not too sure of 11.1.1.3)
    I'm able to just go to Member Selection and select whatever hierarchy i want, Shared or Stored, when I'm connected to Essbase. When connecting to Planning, I dont have any option of opening the form as Ad-hoc mode.
    Can you see the hierarchy if selecting the members using Essbase connection and not planning?
    Cheers,
    Abhishek

  • Some users not seeing all of a web form in Smart View Excel 11.1.2?

    I am on Planning 11.1.2 and I have an end user who, when he opens a web form in Excel using Smart View, he only sees about 1/3 of the entire form. If in the Oracle/Planning web, the form is fine. When he uses my machine, he sees the entire web form in Smart View Excel. Is there a setting on his Excel I need to change?
    Thanks.

    It's a limitation, if you will, of the way JDeveloper works. It essentially runs your JSF page in order to get the rendering. At design time, the phase listener is obviously messing things up since you're not in a proper secured environment - hence the workaround to bypass your phase listener at design time.

  • How to connect Smart Views against BIC2G OBIEE+ Analysis services

    I am trying to run Hyperion Smart View 9.3.1.2.041 against OBIEE+ demo package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 but I can’t get the connection to work.
    The documentation or the package BIC2G:EE+ v10.1.3.3.2-9.3.1-7.9.5 does contain errors that makes it hard to set up and I have not found any useful documentation how to circumvent the "Unable to connect to the provider" message that I get during connection.

    Good day!
    Try to start the service (Hyperion Provider Services - Web Application). If it doesn't work, try to stop it and start it again.
    I had this problem before.
    Cheers!

  • Ad hoc analysis not available in Smart View Panel after connect with LDAP

    Hi everyone,
    Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
    Product:
    Hyperion 11.1.2.2 (Essbase, Shared Services)
    log: appserver.log:
    [2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
            at java.lang.reflect.Method.invoke(Method.java:611)
            at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
            at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
            at org.apache.commons.digester.Rule.end(Rule.java:253)
            at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
            at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
            at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
            at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
            at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
            at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
            at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
            at org.apache.commons.digester.Digester.parse(Digester.java:1785)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(AccessController.java:310)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
            at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
            at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
            at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
            at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
            at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
            at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
            at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
            at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
            at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
            at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
            at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
            at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
            at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
            at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
            at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
    Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
            at java.lang.J9VMInternals.verifyImpl(Native Method)
            at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
            at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
            at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
            at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
            at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
            at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
            at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
            at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
            at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
            at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
            at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
            at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
            at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
            at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
            ... 57 more
    Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
            at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
            at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
            at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
            at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
            at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
            at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
            ... 73 more
    Thanks in advance

    Hi everyone,
    Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
    Product:
    Hyperion 11.1.2.2 (Essbase, Shared Services)
    log: appserver.log:
    [2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
            at java.lang.reflect.Method.invoke(Method.java:611)
            at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
            at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
            at org.apache.commons.digester.Rule.end(Rule.java:253)
            at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
            at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
            at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
            at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
            at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
            at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
            at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
            at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
            at org.apache.commons.digester.Digester.parse(Digester.java:1785)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
            at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(AccessController.java:310)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
            at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
            at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
            at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
            at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
            at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
            at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
            at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
            at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
            at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
            at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
            at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
            at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
            at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
            at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
            at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
            at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
            at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
            at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
    Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
            at java.lang.J9VMInternals.verifyImpl(Native Method)
            at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
            at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
            at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
            at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
            at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
            at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
            at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
            at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
            at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
            at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
            at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
            at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
            at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
            at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
            ... 57 more
    Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
            at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
            at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
            at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
            at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
            at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
            at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
            ... 73 more
    Thanks in advance

  • Web Analysis and Planning smart lists

    Hi,
    Does anyone know whether Smart Lists can be used in Web Analysis reports?
    I dont think this is possible since you can only connect to an Essbase data source in Web Analysis.
    Thanks for your help.
    Regards,
    Seb

    Seb,
    Did you figure this one out? I am trying to use Smart Lists in Web Analysis and cannot seem to create a planning connection.
    Thanks,
    Neha

  • Viewing web analysis reports from workspace

    Hi,
    How do I publish web analysis report so it can be viewed from the user workspace?
    Currently I can see only financial reports.
    Thanks,
    G

    You should be able to see any of your Web Analysis studio created reports in the Workspace (in all of the System 9 versions). Can you as the report designer / admin not see them? Or just the end users? You will need to assign access for end users to be able to see any views.
    Thanks, Tracy

  • Hyperion Web Analysis- Issue in fetching data 50000 rows

    Whenever trying to fetch more than 50000 rows in a Hyperion Web Analysis report, the output is truncated to 50000 rows only. A message is displayed for the same.
    As a solution we have tried the following
    1) Increase the MaxDataCellLimit and MaxJDBCCellCount to 999999 and restarted the services
    2) Ftchmembersize has also been increased and services restarted.
    However inspite of trying out these options with few a more rows than 50,000 the report is not opening.
    Please suggest a workable solution with Hyperion Web Anaysis to handle records between 50000-300000 range.( Source may be Essbase or relational).
    Which tool in Hyperion suite 11.1.2.1 would be the best candidate to handle transactional rows of huge volume ?
    Regards,
    Anirban

    Why don't you try Smart View or the excel addin, Web Analysis was not really designed to dump large amount of rows into it.
    If it is just an extract you are looking for then there lots of export options.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Drill Down and Drill UP on Web Analysis Report

    Hi all,
    I have a question regarding Drill down and Drill up on Web Analysis Report.
    The situation is the following:
    I've created a report with some account parent elements in row. The dimension account has a multiple hierarchy.
    I need to drill down on the child of these elements keeping the parente on top and so i've selected the option "Selected Member First".
    The drill down it's ok for the first drill to go on the next level but when i drill down once more to go on the next level of the selected member hierarchy the drill move this level out hierarchy.
    Can someone help me on this point?
    After that i've drilled just to the last level when i drill up on these elements to return on the previous level i note that in the report happens a strange thing:
    The Drill Up works fine but on the report appears another elements which is the same parent with anothe code/alias of another hierarchy instead of the Selected member.
    On this i've noted tha this 2 different parente have the same elements...I think that the children of the selected memeber can be shared members....Can be this the problem?
    Thanks for the help.
    Best Regards
    Eugenio Gualtieri

    Hi John,
    thanks for your answer.
    I've trayed to set the report on Smart View to virify tou test your advise.
    The situatio is the following:
    IS05101010-PUBBLICITA'
    702000 - VEND. DI SPAZIO PUBBLICITARIO
    702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO     
    W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE     
    W10007 - RICAVI DA SPAZIO PUBBL. INTERASA     
    W10029 - RETTIFICA RICAVI PUBBL. INTERASA     
    ED05101010-PUBBLICITA'
    702000 - VEND. DI SPAZIO PUBBLICITARIO
    702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO     
    W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE     
    W10007 - RICAVI DA SPAZIO PUBBL. INTERASA     
    W10029 - RETTIFICA RICAVI PUBBL. INTERASA     
    If I take only one parent member the drill up works fine but if i take all 2 memeber as above and i decide to drill up on one of the two element occur that the drill work for the two elements at the same time.
    Afetr the drill in this case the situation is:
    IS05101010-PUBBLICITA'
    ED05101010-PUBBLICITA'
    Can be a problem due to shared memebers?
    Thanks for your help.
    Regards
    Eugenio Gualtieri

  • Smart View for Essbase Not Available in Planning Rapid Deployment

    I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?

    As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
    After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
    Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
    I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
    -Tom

  • Smart View Issue.

    Hi,
    We are facing performance issues with Smart View 9.3.1. It works fine when 1-2 users are connected but when more users connect, the time to connect and query increases substantially. This happens when Excel Add-in and Web Analysis are still running fast enough. We have Essbase Server and Provider Services on the same server. Has anyone faced such an issue? If so, what needs to be done to fix this? Will appreciate any help on this.
    Thanks.

    The change you made will take not take effect on restarting the service as it appears you modified the startup.bat. The windows service does not call the startup.bat file but rather gets it's settings from the registry.
    The command line argument you have also sets 700 Mb as the startup heap size; I would set it to something more reasonable (when you set it in the proper place).. Either 64 Mb or 128 Mb are the common values I have seen.
    Finally, unless your users are retrieving some huge spreadsheets, I would doubt the memory heap issue would help your performance. Even then, the difference would not necessary be performance issue, except for the time required to allocate more memory for the heap, but rather a possibility of Out-of-Memory errors.
    Tim Tow
    Applied OLAP, Inc

Maybe you are looking for

  • Add a function in the save process of a bid quotation

    Dear Experts, I like to add a function module into the save process of the quotation (bid_quot) I found the html template, but not the place where I can add my function. I also found the java comand where the save function is called. I'm really new t

  • Docs not opening in originating app!

    This is driving me crazy. I use several text editors for different functions-no matter which editor I save a text file in it opens up in TextEdit. *** is going on here? This is unforgivable.

  • Display Blob content in HTML Region

    Hello, I'm trying to display the contents of an .htm file in an html region. I can get it to display as a link but I can't get it to display as an image. I have a page item that is display as text (do not save state). For the source value I use a PL/

  • Works well in Snow?

    Im heading out to colorado next week and was wondering how well the phone works in a snow environment. And what would happen if dropped into snow? Thanks, TJ

  • Re-Activation Cannceled Account

    I have accdientally cancel my Nokia Messaging Account and want to re-activate it.No matter how I re-install the email client and setup/add ; it just will not work. Please consider an option to re-activate the account. Best Regards Darren Chow