Web Analytics for SharePoint 2010 Issue

Hi Guys
I've provisioned Web Analytics in our SharePoint 2010 farm.  But I am not getting any figures in the reports.  Just all zeros.  The Web Analytics Service & Proxy are running, the staging & reporting databases appear to be populated
& there are .USAGE files being generated.  I have restarted services & rebooted all servers in the farm.
Message is:
There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2) There is insufficient data to generate this report; (3) Data logging required for this report might not be
enabled; (4) Data aggregation might not be enabled at the level required for this report.  
I have looked at:
http://social.technet.microsoft.com/Forums/en-US/5fdd162a-72f2-4146-a3a7-925b86bc085e/sharepoint-2010-web-analytics-not-working?forum=sharepointadminprevious
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
Any ideas would be appreciated.

Hi Darren,
After you have created the Web Analytics Service Application you will have to start two services for populating the data. Go to Central Administration –> System Settings -> Manage service on server. Start the following two services:
1. Web Analytics Data Processing Service
2. Web Analytics Web Service
Choose which events you want to log
Once the services are started go to Central Administration –> Monitoring –> Configure Web Analytics and Health Data Collection and set the appropriate logging, you’ll want to make sure you’re logging following:
1. Page Requests
2. Search Query Usage and so on
Associate the Service Application with the Web App
1. You also want to make sure that your Service Application is associated with your Web Application, so go to Central Admin –> Manage Web applications
2. Highlight the web application you want and click “Service Connections” in the ribbon bar.
3. Make sure the Web Analytics Service Application is associated with the web app
It is recommended when using a multiple server farm to start these service on multiple servers.
After you have performed these steps you can use the Web Analytics reporting. It can take one day before you can view any results. This because the data has to be populated.
Note: i am assuming that you have already created "State Service" service application which will generate charts.
Best Regards, Karim Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

  • Is there a Belltown theme for SharePoint 2010? Or a way to get there?

    Our sites were built off the Belltown 2007 theme.  We've upgraded to 2010 and want to do the Visual upgrade. However there is no Belltown theme.  Has someone built a 2010 version of it.  It REALLY would have been nice to have
    a way to have a consistent color scheme from version to version. 
    Thanks for any help on this.
    Michael
    THANKS!

    Hi Michael,
    Since MOSS 2007 OOTB themes don’t upgrade to SharePoint 2010 and themes created in MOSS 2007 are not compatible with SP 2010, it is recommended to use the new
    user interface in SharePoint Server 2010 to create themes and apply theme to your sites.  You can create a theme using PowerPoint and easily deploy by uploading a new them to a gallery. For details, please refer to the Note in the following reference
    regarding how to use theme after visual upgrade.
    http://technet.microsoft.com/en-us/library/ee424397.aspx
    BTW, for SharePoint 2010 issue, you can post your question on
    SharePoint 2010 forum which is specifically for SharePoint 2010 technology and products.
    However, I am afraid that this queue is not in the managed support list currently which means subscriber support priority is not available out there. Thanks for your understanding.
    Please see the following link for the managed forum list:
    Priority Subscriber Support in TechNet Forums
    http://technet.microsoft.com/en-us/subscriptions/ms788697.aspx
    Hope it helps.
    Thanks & Regards.
    Lily Wu

  • Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

    Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
    When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
    11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC  SharePoint Foundation        
            Runtime                                      
    tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()    
    at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
    I searched online and found this:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious.  It says:
    We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU).  The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC. 
    This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
    Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
    I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
    I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
    Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
    David

    You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Date picker is not working in IE9 for sharepoint 2010 appliation pages

    Hi,
    Date picker not working  in IE9 for sharepoint 2010 appliation pages. We have enabled custom master page.
    Thanks in advance.
    Shameej

    Hi,
    For this issue, you can add the following line of code into the pickerdialog.master which lays in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS
    <meta http-equiv=”x-ua-compatible” content=”IE=8”>
    Or we can use the JavaScript code provided in this blog which would also do the trick:
    http://williamwmy.wordpress.com/2013/06/03/problem-with-sharepoint-peoplepicker/
    A thread with the same issue for your reference:
    http://sharepoint.stackexchange.com/questions/27251/hotfix-for-problem-with-sharepoint-peopleeditor-in-ie-9
    Best regards
    Patrick Liang
    TechNet Community Support

  • PDF File not opening in browser for sharepoint 2010

    Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
    it always open in browser
    I have already made following changes but didn,t work
    Set browser file handling to Permissive from central admin
    Set "open in browser" in setting s of doc library
    Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
    Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
    Installed Adober eader in client machine
    Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
    It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

    It would be handy if you didn't double post too.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
    To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you.  The solution 2 Powershell that deals with updating the Inline MimeType may help.
    http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Cannot complete successful installation of Yammer 3.1.4 Web part on SharePoint 2010 Standard

    I have installed Yammer server component successfully.
    I have inserted the Yammer Web Part (Ver 3.1.4) onto a page in SharePoint 2010.
    However, when in view the page the place on the page where the web part should how up has an error:
    System Exception: Unable to load web part.
    When I edit the page and look at the web part, it looks normal, showing the feed types, but when I select a feed, like "Company Feed", I get a popup window that says "To save your change before continuing, click OK. To continue without saving,
    select CANCEL.

    Hi Larry,
    According to your description, the Yammer web part doesn't load when you used it in a page.
    You must configure the web part to point to a network. Edit the page, select the desired feed, and choose a network. Then, Save the page.
    More information, please refer to the links:
    http://blogs.msdn.com/b/spses/archive/2014/07/06/sharepoint-2010-amp-yammer-step-by-step-guide.aspx (common error 4)
    https://about.yammer.com/success/wp-content/uploads/sites/13/Yammer-For-SharePoint-2010-FAQs.pdf
    In the above two articles, there are some another troubleshootings about Yammer Web Part, please check if they are useful.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

    I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
    Please provide me a link where i can actually know how it is done.

    + to _eNo_,
    Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to find out Db name of perticular web application in sharepoint 2010

    how to find out Db name of perticular web application in sharepoint 2010 to take a backup from sql

    1.  Open the SharePoint 2010 Central Admin application.
    2.  On the SharePoint central administration website, click Application Management.
    3.  In the Databases section, click Manage Content Databases.
    4.  On the Manage Content Databases page, select a web application by clicking the Web Applications drop-down list and choosing a web application.
    5.  Can notice the  available database names for the webapplication. ******************************************************************************************
    Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem
    s p kumar

  • Calling an external web service from SharePoint 2010

    Hi Friends,
    Idea is to call an external web service from SharePoint 2010 list.
    Can we do this using visual studio 2010, how.
    another pointers, please advise.

    Hi,
    You can create Windows Communication Foundation (WCF) web services that you can consume as external content types from Microsoft Business Connectivity Services (BCS).
    For more information, you can refer to:
    http://msdn.microsoft.com/en-us/library/office/gg318615(v=office.14).aspx
    http://www.c-sharpcorner.com/UploadFile/Roji.Joy/connecting-to-a-web-service-using-business-connectivity-serv/
    http://blogs.msmvps.com/windsor/2011/11/04/walkthrough-creating-a-custom-asp-net-asmx-web-service-in-sharepoint-2010/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Custom Login Web Part In SharePoint 2010 Forms Based

    Hi ,
    Im trying to make Custom Login Web Part In SharePoint 2010 Forms Based , all membership configration is done . 
    my question is why (Login1.username , Login1.password ) give this error : 
     login1 does not exist in the current context
    protected
    void
    Login1_Authenticate(object
    sender, AuthenticateEventArgs e)
    02        {
    03            string
    membership = "MembershipProvider";
    04            string
    role = "RoleProvider";
    05 
    06            e.Authenticated
    = SPClaimsUtility.AuthenticateFormsUser(new
    Uri(SPContext.Current.Web.Url),Login1.UserName,Login1.Password);
    07 
    08            if
    (!e.Authenticated) return;
    09 
    10            SecurityToken
    token = SPSecurityContext.SecurityTokenForFormsAuthentication(new
    Uri(SPContext.Current.Web.Url), membership, role,
    Login1.UserName,
    Login1.Password);

    Error 1 No overload for method 'SecurityTokenForFormsAuthentication' takes 3 arguments
    Error 2 The name Wss doesnot exisit in current context 
    Can anyone give sugeestion please 
    cant recitfy this error 
    protected void Login1_Authenticate(object sender,
    AuthenticateEventArgs e)
    02        {
    03            string membership
    = "MembershipProvider";
    04            string role
    = "RoleProvider";
    05 
    06            e.Authenticated
    = SPClaimsUtility.AuthenticateFormsUser(newUri(SPContext.Current.Web.Url),Login1.UserName,Login1.Password);
    07 
    08            if (!e.Authenticated) return;
    09 
    10            SecurityToken
    token = SPSecurityContext.SecurityTokenForFormsAuthentication(newUri(SPContext.Current.Web.Url),
    membership, role,
    Login1.UserName,
    Login1.Password);

  • Office Web Apps - Preview Sharepoint 2010 documents in Sharepoint 2013 Search Results...again

    Hi,
    I found a thread in this forum With an answere to a similiar question here:
    http://social.technet.microsoft.com/Forums/en-US/28bc1e27-4a65-4c61-9b3e-cb9dad17f779/office-web-apps-preview-sharepoint-2010-documents-in-sharepoint-2013-search-results?forum=sharepointsearch&prof=required
    ...With the answere:
    "OWA uses an access token to talk to SharePoint 2013.  It cannot use this when talking to 2010.  In order to work with 2010, you have to create a custom display template that converts the file url to an openurl link. "
    BUT...
    may anyone give more information how to do this?
    Links to articles? Links to description and samples?
    jik

    Hi,
    According to your description, my understanding is that you want to preview documents from SharePoint 2010 in search results in SharePoint 2013.
    Per my knowledge, the Office Web Apps is configured to work with SharePoint 2013, so it will not work with documents in SharePoint 2010.
    I recommend to configure Office Web Apps to work with SharePoint 2010
    and make sure that documents can be previewed in SharePoint 2010 using Office Web Apps to see if the documents can be previewed in SharePoint 2013 search result.
    http://technet.microsoft.com/en-us/library/ff431687(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How to stop indexing certain set of documents in Fast search for sharepoint 2010

    Hello
    Can someone help me to understand how to drop documents with the state as archived at the time of indexing, i meant how to stop indexing those documents in fast search for sharepoint 2010.
    Shweta
    Me

    Have you tried adding it to the exclude list?
    Include a file type in the content index (FAST Search
    Server 2010 for SharePoint)
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • No usage information for SharePoint 2010 or 2013

    Hi community,
    I try to retrieve information about SharePoint 2010 or 2013 usage (wich user access Enterprise or Standard feature, etc.).
    I checked the configuration of IIS log files and it's ok. MAP Toolkit 9.0 parsed the log files, but didn't show any information about usage.
    Did I miss something?
    Thanks
    http://mdeleplanque.wordpress.com

    My bad, the date range was not set properly...
    I retrieve users and devices in the report generated by MAP Toolkit 9.0 for SharePoint 2010 and 2013.
    http://mdeleplanque.wordpress.com

  • Learning EcmaScript for Sharepoint 2010?

    Hi All,
    Are there any good resources/books to learn Ecmascript in context with Sharepoint 2010?
    Appreciate your suggestions.
    Thanks,
    Rahul Babar
    ASP.NET, C# 4.0, Sharepoint 2007/2010, Infopath 2007/2010 Developer

    Hi
    Check following URLs for SharePoint 2010 Ecmascript,Javascript Client object model Tutorial,Samples
    http://www.learningsharepoint.com/sharepoint-2010-ecmascriptjavascript-client-object-model-tutorialsamples/
    http://msdn.microsoft.com/en-us/sp2010devtrainingcourse_ecmascriptclientobjectmodel.aspx
    Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact [email protected]

  • Web analytics in sharepoint foundation?

    Dear Sir,
    can we have in formation that which user accessed which document and for how much time.
    sign in time and sign out time for user
    which user access which page
    can we have all that information in sharepoint foundation.
    i have already gone through default feature of web analytics but all these requirement are not fulfilled , please guide me if i can access all this information through sharepoint api
    Thanks,
    Gaurav

    Hi ia have facing same issue ,but when i go through the the web analytic service of sahrepoint.
    it does not support on custom pages and doesn't generate report for custom pages also..
    As I understand things, the usage analytics logging database is designed to be queried directly (SQL) and
    not via an API. I believe Microsoft plan to publish the schema for this database soon.
    The
    database Brian mentions is called WSS_Logging - the useful part are the views - I would suggets opening up the database in SQL Management studio and running the views to get a feel for the data they provide
    http://otak-otak-it.blogspot.in/2011/05/how-to-get-sharepoint-2010-web.html

Maybe you are looking for