Web Analyzer 7.2 Issue

Hi All,
We have installed Essbase 7x and Planning 4.0.5.0 successfully.
We now installed Web Analyzer 7.2.
The Problem we are facing is that we do get the Web Analyzer screen and the Logon Button. When we click on the Logon Buttom nothing happens as if the system is hung.
One more thing that is baffling is that can it be because of internet settings ?
Any help will be appreciated.
Thanks in advance
Balakrishnan

Hi All,
Just to refine my earlier mail on Web Analyzer 7.2.
After Successfully installing essbase 7x and Planning 4.0.5.0 we went on to install web analyzer 7.2. We have also installed shared services.
During web analyzer 7.2 we were prompted with RDBMS Database, Userid, Password which we provide promptly.
We found in the RDBMS Server the database was created with an entry of userid and password automatically.
We completed installing web analyzer and run the config utility.
When we launch the web analyzer through the following URL we get the Web analyzer screen. We enter the user name and password and click on the logon button.
http:\\<hostbname>:16080\Analyzer7_server\Analyzer.jsp
Thereafter the screen does not change. It remains as if the system has hung.
We want to know as to whether we have to install first the Hyperion Reporting and Analysis first and then install the web analyzer ?
Can anyone please advise fast ?
Thanks in advance.
Regards
balakrishnan.

Similar Messages

Report to report Interface issue in Web Analyzer

Hi,
Report to report interface for one of the queries works fine in Development ,Quality and Production systems through BEx Analyzer ,where as it shows the wrong values in receiver query when we try to use it through Web Analyzer of production.In production Bex Analyzer it works fine and even it works fine in web analyzer of Development and Quality systems and the issue is with RRI in Web Analyzer of Production system only
                Please help me to solve this issue.
Thanks & Regards,
Madhu.

Hi ,
Youi can check this tables
                    MKPF               material document
     MSEG               material document (item level)
                    RESB                                Material reservations
     RKPF                                 header
Rergards
SANIL

Web Analyzer Issue

Hi All,
We have installed Essbase 7x and Planning 4.0.5.0 successfully.
We now installed Web Analyzer 7.2.
The Problem we are facing is that we do get the Web Analyzer screen and the Logon Button. When we click on the Logon Buttom nothing happens as if the system is hung.
Any help will be appreciated.
Thanks in advance
Balakrishnan.

Fixed

Problem with '-' (dash) in BEx web analyzer

Hi All,
we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as "1234\-5467" in the selection screen.
If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
Has anyone had this type of issue? Please respond.
Thanks
Niveda

Thanks Olivier,
Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
Let me explain it with an example.
Scenario:
Let say company defines material in the following format.
"123", "456", "788", "345"....etc.
And I have a report which has material as input selection.
To run this report with single material i enter "123" in the selection screen
To run this report with a range of materials, I need to enter 123 - 456 in the selection.
I have no Issues
Scenario 2.
Consider a case if the materials are defined in SAP as "001-1234", "987-234"
"123-234" etc.
In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
Is this 1 single material(001-1234) or a material range (001 - 1234)??
We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
Any help??
Niveda

Characteristic attribute does not show correctly on BEx Web Analyzer

Hello everyone!
I'm working on a report in BEx Web Analyzer wich has the characteristic 0EMPLOYEE. When I call the context menu for this characteristic and select properties, I get a list of it's attributes. I select one of them for display.
The problem is, the value shown is not the correct one. It's an "old" value.
I change the employee's attribute in R/3 via PA30;
I succesfully update the change in BW (0EMPLOYEE master data);
The value shown is the previous one.
Is there any buffer between the BW system and a BEx Web Analyzer query wich I need to force-clear in order to see the correct data?
Best Regards,
Luís Andrade.

Thanks for your response!
It was a buffer issue. I solved it by simply refreshing the query with different selection conditions to force the system to read data from the BW system.
Best Regards,

Query output using BEX and web analyzer

Hi all,
I have an issue while designing a query in query designer.......I have a sales cube in which sales for every month is reflecting .....Now i have to design a query to show month wise sales....
But for some months if there is no sale record in the sales cube for that particular month like Feb 2006, when i execute the query on this month using BEX or web analyzer , it simply says "No data Found"..............
I want to show 0(zero) in sales quantity instead of this message.....Please guide me that how can i replace this message with zero value.
regards
Hina

Dear Hina Zakir,
<b>This is the BI 7 Query designer solution...........</b>
if u want to disply even if the value is Zero then goto the query properties not the single key figures go to the entire quer property and then click the Row/columns in that Suppres Zeros in that select Do Not Suppress + Effect on Tab is there in the Select Row or column or both ................then u can ablet to c the values as Zeros..
Regards
venu

Problem accessing BEx web analyzer

All,
I just created a new user in portal and assigned (only) three roles Business Explorer, Business Intelligence and Business Planning.
After logging in as this new user, when I open Business Explorer>BEx Web Analyzer, I get an error and after going through error trace, I found this detail.
05:16_06/04/09_0004_7654950
[EXCEPTION]
com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.BI/low_safety/com.sap.ip.bi.web.portal.integration/components/launcher)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sapportals.portal.prt.deployment.DeploymentManager.checkPermissions(DeploymentManager.java:2000)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Please help me solving this issue. What else are the roles I need to assign to this user?
Thanks.

No response.. and I dont need it now.

Can not work with BEx Web Analyzer correctly

Hi all,
When I go into the link of BEx web analyzer in portal, an error raised.
<b> URL used, 'http://<myhost>:<port>', is invalid;Distributed session management(DSM) cannot function. See sap notes 596698 and 654326.</b>
And I've seen the notes in SAP, and got the reason why this error happens, but exactly I just install NW2004s in my local PC and did not have any domain name.
What should I do about this case?
Helpful info will be awarded.
BR
Bob

Hi,
Try to set RSADMIN parameter ALLOW_MULTI_DP_RESET=X
This note may give you some insight on the issue.
1581923 - BEx Web: Optimization on Back with Many Data Providers
Regards,
Suman

Working in BEx Analyzer but giving error dump in Web Analyzer

Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and help

Thanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again

Error in characteristic properties in Web Analyzer

hi
we are in BI 7.0, I have this problem ; i run my query published on portal with WAD template; in BEx Web analyzer, every thing is fine. All the navigations and context menu are working very well except for characteristic properties, during Runtime;
In the context menu for any characteristics, if we go for "Properties",
and do any selection, then it goes for the following runtime error;
500 Internal Server Error;
Failed to process request; Contact your system administrator'
Root cause
java.Null exception
can any body let me know what could be the issue, and how to fix this?
thanks and regards,
SA

Hi Ahmed,
This is a known issue and should be solved by applying the patches for the BI components BI-BASE-S and BIWEBAPP mentioned in note 1130839. For future requests please copy the whole stack trace (everything coming after the NullPointerException) into your post to get a quicker answer.
Regards, Janine

Trying to save a modified query in Web Analyzer

Good Morning,
We are beginning to work with the Netweaver 2004s Portal and its integration with BI. We have created a query using Query Designer and we are able to view it in the Portal's Web Analyzer using the 0ANALYSIS_PATTERN Default Template. While I am in Web Analyzer, I have made modifications such as adding Free Chars. to the query. After my modifications I click on the Save AS button in Web Analyzer. The screen that appears only allows me to enter a Description and not a Technical Name. Once I do this, I receive an error saying I need a technical name.
We are currently running Netweaver 04s SP6 for BI and BI-JAVA. Has anyone ran into this issue?

Michael
We have not yet had this issue. Could we exchange, eventually separately on your architecture and installation. We are wondering on which configuration install BI-Java (separate server, separate DB, same server ?)
Thank you
Fabrice
PS once installed we can (and will) have a look at this issue

Web analyzer displaying only 4 columns

Hi,
After executing the query in the web analyzer initially it is showing first 4 columns to show the next 4 colomns need ti click next button.then first 4 colomns are disappearing.
finally we are able to see only 4 columns at all times.
please provide the solution to display all 12 columns in the web analyzer.
Thanks,
Sri

Dear Sri,
The following thread is dealing with the same question, the last answer will solve your issue.
Sizing issue for query runtime in portal
Best regards,
Janine

Unable to open a query view in web analyzer

Hi All
In web analyzer i have saved a Query view, Using save as tab.
when i tried to open that Query view through open tab in web analyzer it is throughing some exceptional error.
Is this the right way to access the saved query view, can anyone help me with your suggestion?
Thanks
Sushma

Hi,
Check this
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/bc5c78da1e1bbce10000000a1553f7/frameset.htm]

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to open a saved view in bex web analyzer.

Hi All
In web analyzer I have saved a view through context menu -- save view. but in open window I am unable to find saved view. Can any one help me to know how to open it.
Thanks in advance
Vani

Hi Bhaskar
I can not even see it in favourites or roles.
Thanks
Sushma

Web Analyzer 7.2 Issue

Similar Messages

Maybe you are looking for