Web app: How can I make a web app input form post directly to a sub category

Please, how can I go about this? Some of the ideas coming to my head is to  replace the section I require with the  generated webapp input form code with this:
<input type="radio" name="CAT_Category" value="{module_category, ID} onclick="javascript: return false;" >2013 /> // Not tested because am not sure of the markup
Am I on point ? Or is there any other way I can get this done.

I Trickster, pardon me if am not clear enough. But this is it. I have many BC Categories setup for different web apps. If you use the module {module_categorylist} only. BC will populate all the categories on the BC site, instead of a specific category  relevant to the web app. If it is {module_categorylist, categoryID}, you are telling BC to use the the categories in a specific category.
When you say that you want to assign a web app item to a sub-category... do you mean the built in BC categories . I want to do this via the web app input form not through the admin.
Do you have a top-level category that contains all the relevant sub categories that the user could use to classify/categorize the web app item upon submission?  Yea I have a top category that the user could use. It is this top-level category ID, I have used with the categorylist module.
If you don't want the user to choose the sub-category themselves, how do you plan to derive the sub-category anyway? Thanks again Trickster. You have provided the solution to that with the hidden input field code you shared earlier. The sub-category has been pre setup as usual in BC and the sub-category ID would be used as you instructed in the code. This is intended for another web app that won't require users selecting a category. This is the example you shared:
<input type="hidden" name="CAT_Category" value="my category ID"/>
Using my example above I was able to test and have it working (using {module_categorylist} with the SELECT element) on a web app input form and when I submitted the new web app item it was classified in the category I chose. Yes Trickster, it works for me too that way. the web app item was classified perfectly, but if you go to your the web app item submitted at the admin-end, you will discover in that the category the user selected in the front-end is not selected, even though the item was classified
I have highlighted it here: http://screencast.com/t/dwiXzBFXp
The option selected  by the user is not captured. It often defaults to the 2012, even when the user selected 2013 and the item has been classified as 2013.
I hope am more clearer. Thanks for all the effort.

Similar Messages

  • If i delete an app, how can i find out what app did i delete

    My son delete an app. Can I find out
    what app did he delete?

    Not exactly.
    You can open the App Store app > Purchased > Not on this iPad and you will see a list of apps you own that are not installed on the iPad. I believe the newest ones are listed first.

  • How can I make the web server work on port 80 and not 443. I can only access my website using https.

    On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
    This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
    How can I change that? Does anyone know?
    Thanks for any reply

    in the server: I checked the SSL certificate. Tried several configuration.
    Well, that's a problem for a start.
    Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
    If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

  • How can i make a web VI using web UI buider

    Hi,
    I have installed a web UI builder and now i'm trying to get rid of it by going through tutorials.
    My biggest problem is i'm unable to understand the concept making web pages,
    And my+ requirement is I have a servo motor and by running this motor plots which are being made on a graph i want to display it in a web browser and anyone can see it without a control.
    Can anyone help me that how can i use WEB UI Builder efficiently to the above task.
    Regards
    Mangesh
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....
    Solved!
    Go to Solution.

    Thanx altenbach
    I don't have a evaluation copy of Web UI Builder and now with mty efforts i'm able to run my LabVIEW VI into web UI Builder by using web services.
    But the fact is i'm unable to build and deploy it( as it is only in full version). 
    My problem is by building and deploying my Web UI program what can i do with that.can i possibly publish it on Website i'm having?
    Regards
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

  • How can i make a simple app?

    Hi,  i just became an apple develiper,  Im wondering how to make a simple app like a "flashlight" like app,  Can anybody help me out?  would i have to start from scratch or could i use someone else's start??

    Use your logon to the iOS Dev Center and see this links:
    iOS Human Interface Guidelines
    iOS Starting Point
    Start Developing iOS Apps Today
    App Development Overview
    App Store Review Guidelines for iOS Apps
    Your First iOS App

  • How can I make a loyalty app for small business

    I am experienced with Adobe Creative Cloud - no prior coding experience - however, I have assisted on a few websites that are Word-Press based.
    I am working with a small business that would like to have an app with basics like their menu and products - however they would like a loyalty card on the app.
    How can I use the CC to make this happen?
    Any feedback would be appreciated.

    Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
    http://www.apple.com/feedback/iphone.html

  • How can i make my ipad apps work again?

    i have this iPad2 wifi+3g  for like five months now but iv never tried sync it on my laptop. Just yesterday i decided to try sync but im frightened when a pop up window appears said that syncing will erase all the data i had on my iPad including my favorite movies and apps.It's been two days now that i've been tinkering my iPad apps.My 1st problem now is i lost all my movies that my friend installed on my iPad and i dont know how to retrieve it. 2) i foldered my apps and sync it and also  update it to iOs5   but after the update and syncing my apps doesnt work now like my bookworm  and few other games doesn't work but it's still there on my folder.
    Can someone help me please...  a detailed instruction is immensely appreciated .

    If the movies that your friend installed on your iPad were not bought with your Apple ID or are not in your iTunes library - they are gone - unless he reinstalls them or you sync again with iTunes (if they are in your library).
    If you bought the movies with your ID and you live in the U.S., you can download many movies again for free using the purchased tab in iTunes.
    If your third party apps no longer work, try downloading another app on your iPad - any free app is fine. That will reset your iTunes authorization and should reset the other apps.

  • How can i make my java app auto reconnect to Oracle.

    Scenario:
    when i am working with my java app if suddenly Oracle server connection unplugged. Then i got some problems regarding database.
    When they replugged the connection, i need to restart my app again. Then it works fine.
    Question:
    When the database is replugged or restarted, then how can i reconnect to the DB automatically with out restart my app. Please letme know is there any auto reconnect process is there for Oracle.

    If you want your application to reconnect, you would need to add logic that catches the exception that gets thrown when the connection is lost and tries to reconnect.
    Justin

  • How can I make my web page fill up the entire browser screen regardless of monitor it is viewed on,

    I have noticed that some websites are designed so that the page expands to fill in the entire screen, regardless of the size of the monitor. Here is an example: https://www.draft2digital.com/support/
    I have viewed the Muse tutorial that expands the Footer area to fill in the whole screen, but it does not address how to do this for the main part of the web page, or the header. I have looked at the site setup section and do not see where I could set it to expand.
    Any help would be appreciated.
    Thanks.

    Okay, in your link the blue bars would be in muse as a blue box then drag the right side so that it stamps just outside your page area. This will make muse program it so you will always see it extend to fill the browser window. Do the same on left side and you should be good. It will work even better if you also centre the rest of your content under page, page properties, padding - check the box for centre horizontally. Any content you want to extend with the browser, while the rest stays centred, you have to drag extending the content so it snaps just outside the main page in muse.
    Hope this helps.

  • How can i make a Web application with listboxes as the column value

    Hi,
    I have two tables,one is employeees the other is devices.(Devices is the table for department notebooks).I want to implement an applicatiion for employees in order for them to book department laptops,so everyone will know which devices are in use and book the vacant notebooks.I want to make a view,such that it has a names column with static employee names and a devices column with list boxes for every employees such that they can select pre-registered notebook labels.
    Thanks for your help.
    Best regards,
    Edited by: ebaris on 13.Eki.2008 12:50

    Hi,hello, excuse the delay, the way is the following, I assume you have Application Express.
    In any page of your application click on List of Values.
    Click-on to create.
    Name-list: LOV_NAME.
    Select-type dynamics.
    With the generator creates the SQL queries.
    Click on creating Values list.
    Select the item you want to convert into a selection list (ComboBox).
    In the Show-like property, click on the Selection List.
    Click on the link LOV, select the list of values created.
    Apply changes.
    Roberto.

  • How can I make a web viewable version of the magazine I'm making in InDesign?

    I have found solutions for making tablet viewable versions of the magazine using the Digital Publishing Suite but our readers are older and want to view the magazine in a secured area on our website.
    I've tried interactive PDFs but not all browsers support in browser viewing of the pdfs and having readers download the pdf to view it is not acceptable. I've also tried exporting as a SWF file but the quality was a bit fuzzy, there was no option for zooming in and features like text searchability weren't available.
    It's looking like we will need to use a solution like Texterity but we'd rather do something in house, especially through InDesign, if there's a solution available. Anyone know of an option I could use?
    Thanks,
    Petra

    I'll think there was a missunderstanding. So i've made screenshots of the problem.
    Here in CS5.5:
    https://www.dropbox.com/s/bxwuqjh9n8a2nr7/Screenshot%202013-11-20%2009.09.54.png
    Here the same in CC:
    https://www.dropbox.com/s/8x9kfsmf1vlf7k3/Screenshot%202013-11-20%2009.09.38.png
    Sometimes I have to reconstruct old documents and have to make small modifications.

  • How can I make the 'remote' app work across a routed network?

    So, I have trusted and guest networks, with iTunes running on a Mac on the trusted network. I'd like iOS devices on the guest network to be able to use the 'remote' app, specifically the DJ function.
    I think there will be two components:
    -- service discovery. Apple likes mDNS (Bonjour), so possibly can be done like this: https://discussions.apple.com/thread/2751128?start=0&tstart=0 but one would need to figure out what service discovery records remote is looking for.
    -- traffic. Appropriate traffic would need to be allowed between the two networks.
    Has anyone looked at the wire traffic for remote, or gotten this to work?
    Thanks,
    Heath

    Welcome to the Apple Community Dylan.
    There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.
    If you already have homesharing set up on the Apple TV, you merely need to set it up in the remote app settings.

  • How can i make my own app?

    I would like to make an app for my small business, not to sell to the public. Our sales people (only 4 of them) have iPads and I would like to make a catalog of our products into an app so it's easier to sync and use for the sales team. I've found several online companies that will help me but not sure who to go with or the best option...or if there's something I've overlooked. I've tried Dropbox and Goodreader and while that works...an app to me sounds better. The catalog would consist of pictures, product descriptions, some video.
    Thanks!

    You could start out with Apple's iWork apps like Pages for word processing and Numbers for spreadsheets (or something similar from the App Store). These apps allow you to embed photos and videos, or links to your own YouTube videos.  And you could use iCloud or DropBox for sharing and collaboration between your teammates. 
    Experimenting with these off-the-shelf apps may give you some ideas for custom solutions that better meet your business needs.  Good luck!

  • HT3702 by mistake i had paid the amount of $49.00 on garmin app, how can i make this transaction retroactive?

    its happen on september 8 2012

    All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I make an app with xcode that works like a news app? So that I can post articles on the app. Do I have to use a database or can I connect the app directly with my mac?

    How can I make an iphone app with xcode that worrks like a newspaper? So that I can post articles on the app while it is on appstore. Can I directly connect the app with my mac or do I have to connect it to a database?  Thanks

    Funny, I was thinking you'd want to use the prescribed deployment that Apple went to all the trouble to provide so you wouldn't trot down the garden path with some other implementation, only to find your app rejected with the admonition to use Newsstand after all...
    If you're all hot to ignore all that & DIY, why are you even asking...why not just go for it...

Maybe you are looking for

  • Ipod touch library restore! HELP PLEASE!

    Someone help please! I have an ipod touch, my pc stoped working so my entire library got erased. Is it possible to somehow bring up my old library on my newly restored computer? -Im using the same computer now as I was when I had my original itunes l

  • How do I get the methods to respond to my main program?

    I have created 3 classes,where class Kunde is my base class and class PudsPrAreal and PudsPrTid are derived classes from class Kunde. All my classes went through my compiler without error, but my main program is not able to read the methods from my c

  • WIndows 7 64 bit, iTunes does not play music

    I have new computer WIndows 7 64 bit, I installed the iTunes successfully and can open it. But when I click on the music, they just don't play the music at all. I have tried uninstall and reinstall the itunes, but it still does not work. What can I d

  • Working with JEditorPane to display HTML page

    iam loading html page into JEditorPane . how to get the html form data to validate give me soluation for this problem ... thanks .... karthi

  • Why is my podcast not updating correctly?

    My podcast, the jaguar tapes: https://itunes.apple.com/nl/podcast/the-jaguar-tapes/id557617194?l=en&mt=2 It's not updating anymore! The new artwork isn't showing up. Also the new episode isn't in there on the correct date. Can someone please help me