Web app loaded onto iPad for offline....

Hey there.
I have the app HYPE and created a small webapp that I want to put on all our iPads to be used while off line.
- How do I load the WHOLE site onto the iPad?
- How to I open and use the site on the iPad off line?
Thanks for any help.
Tony
PS: I'm open to alternative APP solutions if you have thoughts on making them and loading them to the iPad.

Yes!  You will need your wallet.
Airstash
This dual personality device is both a WebDav device which allows you to transfer files via Wifii between the Airstash device to the iPad and a thumb drive which works with compuers.
Compatibility
Wireless operation:
     Web browser WiFi b/g capable device
     Optimized experience for iPhone, iPod touch, and iPad via HTML5
     No internet connection required
USB operation:
     Compatible with most operating systems that support USB Mass Storage Class (thumb drives)
     Firmware update via file drag and drop
http://www.airstash.com/
  also see: https://discussions.apple.com/message/15180504#15180504
                https://discussions.apple.com/thread/4907283?tstart=0

Similar Messages

  • What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    Per http://www.apple.com/ipad/specs/
    AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
    AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
    Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
    Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Tomcat: order of web-app loading

    Hi folks,
    does anybody know on which order Tomcat loads its web-apps ?
    I need a particular web-app loaded before all other web-apps.
    Is there a way to sepecify the loading sequence in Tomcat?
    Regards,
    Peter Menzel

    Try explicitly declaring the web app contexts in the conf/server.xml file in the order that you want them to start.

  • Cannot load apps directly onto ipad

    When I try to load apps directly onto my ipad via my wifi it just shows as "waiting" and eventually states cannot connect to itunes. (although I must have been connected originally to start the download) any ideas?

    This is a wild stab-in-the-dark but a system Reset cures many ills and takes but a minute to perform:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
    A Reset does NOT delete apps, photos, movies, music or any other data. A Reset does NOT delete any settings for email, network access, etc.
    Also, you might wish to download the 4.2 User Guide. Pay special attention to page 170.
    http://support.apple.com/manuals/#ipad

  • Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

    I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2” 
    , both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
     Things are working fine if I add new farm by using New-OfficeWebAppsFarm
     with server name as internalurl in PowerShell console
     as like “  -internalurl http://
    md1xxxwfe1  but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
    I have gone through following blogs but no luck.
    http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
    http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
    http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html 
    http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
    The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
    screenshot) but it should show hostname rather than server name.
    Please help me
    Thanks, Ram Ch

    Hi  Ram ,
    For  troubleshooting your issue, please take steps as below:
    Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
    Application Request Routing
    Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
    HTTPS.
    Make sure you have configured the cluster correctly for full internet name:
    Reference:
    http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Office Web App Load balancing Question

    I am going to install office web app in load balanced farm behing f5. There are few questions i want to ask:
    Do i first put servers in load balancer and start installing office web app or after installation of office web app in one server put that in load balancer and add another one or put both in load balancer and start installing.
    While i tried without putting servers in load balancer with offload ssl parameter , when i tried to join second server in the farm it gave me error destination unreachable. Is it because with offload ssl parameter it is looking for load balancer or something
    else? I checked port 809 from the servers and also verified the user was local admin in both machines.
    Any insight will be helpful.
    Adit

    Pls refer below link for configuration of NLB for OWA servers:
    http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • How to print from my web app on an ipad over wifi?

    I want to make an web app and want to print some document from the page of the application on an ipad over wifi connection.
    I know about AirPrint but does it work with javascript?

    Has anyone seen an example of how to create one for printing? I need this functionality for Android and iOS.

  • New release of native RSS Hub app with with support for offline reading and much more

    Hi All,
    I'm pleased to announce a new release of native RSS Hub with with support for offline reading, subscribing to news based on keywords and much more. No online accounts or registration is necessary. This release includes such features as:
    Subscribe to your favourite RSS feeds. Just type in web site address and application will discover feeds automatically
    Add feed directly from the browser
    Subscribe to RSS feeds based on your search criteria
    Download feed content, images and articles for offline reading
    Customize led colors, feed icons and much more
    When application is minimized on home screen dynamic cover will show images and titles of the latest news
    Customize notifications for your subscriptions
    Fetch feeds in background
    Customize font sizes
    Organize your feeds into groups or mark as favourites
    Use out-of-box RSS subscriptions
    Full support for Q10/Q5
    Share news
    And even more!
    Check this out:
    BlackBerry World - RSS Hub

    I use a Withings scale. Yes, it requires the Withings apps but syncing has been pretty seamless. The HealthKit framework is designed to allow applications to share information. At this point, it doesn't appear to be designed to allow devices to share information with the Health app directly. Given the fairly rudimentary nature of the way information is displayed by Health, this makes sense. Health is great for making sure that the weight data from my Withings scale gets synced to My Fitness Pal and Runkeeper. It's far more useful to me to see my weight data in MFP where it is used with the food diary and the movement data from my UP24 to give me a good picture of what I need to be doing. Health just doesn't really compare. It gives you basic graphs and that's about it.
    So, I guess what I'm saying is don't discount the scales that require an app. The Withings app is very nice. It also lets me take my resting pulse every morning (which is sent to Health).
    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Excise duty not loaded onto inventory for non excisable plant

    Hello
    I am facing a problem in excise duty flow. I have two plants, one excisable and second non excisable. one vendor is supplying the material to both the plants, so vendor is sending the invoice having BED, ECess & SECess for both the plants.
    For excisable plant all the duty values are flowing correctly, but for non excisable plant BED is getting loaded onto inventory.
    For non excisable plant, I have maintained conditions records al plant level for JMIP (BED Inv %), JMX2 (A/P BED Inv), ZECN (IN:ECess Inv %), JEC2 (ECess Inv Total), JSEI (IN: A/P SECess Inv), JHX2 (IN: SECess Inv Total).
    During MIRO, BED is not getting loaded onto inventory, while ECess & SECess is getting loaded to material.
    Pl suggest, where to check the settings or any settings for condition types, tax procedure etc.
    Thanks & regards'
    Manoj Gupta

    Hi,
       The system behaviour of posting to stock account is controlled by account key NVV. Go to OBQ3, in your tax procedure TAXINN (or copy of that procedure) check for the condition types which account keys are assigned.
    System will never discriminate that BED is not getting inventorised but ECess and Hcess on BED get inventorised.
    Regards

  • Incoming Email not working for one web app, but IS working for others in same farm.

    I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates.  It works just fine for two web applications, but it will not work for one particular
    web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
    application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
    if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
    does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
    the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site.  The App Pool and Timer
    Service accounts have rights to the folder and to the library.
    The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
    The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
    ID:
    Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
    Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
    reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
    This did not fix the issue for the case mentioned above.
    What could possibly be the issue preventing incoming email from working on this one web application?

    Thanks for your reply.  Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause.  As noted, _other_ emails send to http://workingapp are working just fine.  I can send two emails - one to a library on http://workingapp
    and another on http://notworkingapp.  The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly.  In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
     So clearly, the timer job on WFE1 is running and attempting to process the file.  For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
    WRT to #1, I have done this already (as noted in the original post).  I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed.  If I return it to http://workingapp it is processed.  In other
    words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library.  I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
    the alias.  Once done, emails sent to the alias are not processed.  I then do the reverse, and it works again.
    On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
    In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp.  Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
    - the problem is bound to http://nonworkingapp
    I'm not sure what you mean by "steps to reproduce the issue".  If I knew that, I would probably be able to solve the issue.  The best I could come up with to describe the situation would be:
    Set up SP 2010 in a three-node configuration with multiple web apps
    Enable incoming email and confirm it works
    Migrate to a SP2013 SP1 farm in a three node configuration.
    Enable a new email alias for a library
    Observe that it doesn't work for one web application.
    Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

  • How can i Store web links in my iPad for easy access?

    How can i store web links in iPad for easy access?

    Add them as a bookmark in the Safari web browser. You can sync bookmarks between your computer and iPad too using iTunes or iCloud.

  • Building Web Apps on Adobe Coldfusion for Adobe Connect.

    I'm looking for resources pertaining to development of web apps such as Widgets using Coldfusion 9 directed for use on Adobe Connect 9.  The only resource I'm aware of right now is the Collaboration Builder Toolkit SDK, but that is specifically for development with Flex and Actionscript.
    http://help.adobe.com/en_US/connect/9.0/collaborationbuildersdk/connect_9_collaboration.pd f
    I'll gladly accept Flex + Actionscript as my goal if there are benefits of doing so.  Right now I'm looking for and HTML5 or CFML solution if possible for this project.

    i'm using chrome on windows 8.
    here a screenshot on Muse:
    here the preview on chrome
    as you can see it even changes the way the words are dislayed in each box (check the last line, 3 words on the muse version, 4 words on the browser version).

  • How come my app on my ipad for facebook when i click on it, it shuts down and it does not open

    when i try and open facebook on my ipad i click on it and it just shuts down and it can not see anything on facebook i delted the app and started my ipad over and it keeps shutting down what do i do is i somethig in the settings

    Hello Lartito86,
    Thank you for the details of the issue you are experiencing with the Facebook app on your iPad.  I recommend the steps in the article below.  You can skip the step to install another app from the App Store and any other steps you have already taken:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can the latest version of Pages App load onto First Gen Ipad with ISO 5?

    I hadn't purchased pages until now, but my old ipad with ISO 5 cannot install. Is there an older of Pages on Itunes to use on the old ISO 5?
    Or can the ipad operating system be upgraded to ISO 7?

    The iPad 1 can only go up to iOS 5.1.1
    See this note from Apple on older App versions: http://support.apple.com/kb/ht5919

  • Saving web sites to your iPad for later viewing

    I would like to save a few web sites completely to my iPad to view later, where there is no internet acess. Using some sort of browser that can acess the data part of the iPad. Is it possible and how do I do it. Just using the iPad Only, no funny stuff that requires more parts.

    http://www.google.dk/search?q=offline+surf+iPad&ie=UTF-8&oe=UTF-8&hl=da&client=s afari

Maybe you are looking for