Web Application Designer change font

Hi,
I am working with the Web Application Designer and I want to change the font of the INFO_FIELD_ITEM's . Does anybody know how to chage this?
Kind Regards
Rob

Hi,
It seems the only that works is changing things via the portal themes.
I don't see anything in the param
http://help.sap.com/saphelp_nw70/helpdata/en/47/96784226d1d242e10000000a1550b0/frameset.htm
Check http://help.sap.com/saphelp_nw70/helpdata/en/44/317d1f955e3f0ae10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/45/ef6009b37f3482e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/45/ef66f1b37f3482e10000000a1553f6/content.htm
for details
Eddy
PS. Reward useful answers and earn points yourself

Similar Messages

Web Application Designer: Change Table Chart to Line Format

Dear Experts,
We, as novices of the web application designer, encounter a problem in using this program. After having created a Chart table, we cannot changed it to the line format.
The things that we perform are as follows:
1) Right click and choose lines format
2) Give it all titles
3) Click Next until finish
However, the result is still the chart table. Is there anyone who kindly give me steps of how to change it.

Hi,
Please try the following:
1. Highlight the chart.
2. In the Web Item Properties for chart, go to Edit Chart.
3. Click on the ... incon
4. Pick Lines
5. Pick a type of Lines graph.
6. Follow the wizard to change the required properties.
This should work for you.
Regards,
Xibi

BEx Web Application Designer trouble, fonts doesn't change

Hello all
I have some trouble with BEx and his fonts. i create a graph using BEx, and i want to change the fonts and the size of the text. Everything is ok up to this, the display show the good result , but after, i want to publish the page on our portal with the graph inside it. But when we do that, all the font of the graph change back to a standard police (look like arial)
I ve search a little bit in all the note, and i ve found 596825 and 1028690. I ve follow the instruction, and i have check the igs, set up patch 19, and check the log. All the font that i ve set are loaded when i restart the igs, but still when i display the pages, the display is still in standard format. I m not sure i ve changed my gfwchart file like i have to do , can someone check it (( i m trying to set Courrier New for test : http://img519.imageshack.us/img519/360/print4vr9.jpg )
Can someone help me?
Regards
Chris

I ve notice something that could be interresting
I ve normally set up igs 6.40, with patch 20. but when i look in the status area
REGISTERED_INTERPRETER
Server Port Type Version Author
PRYEDBW 41001 BWGIS 6400.0.15.10 SAPPH10
PRYEDBW 41001 CHART 6400.0.15.1007 SAPGFW
PRYEDBW 41001 IMGCONV 6400.0.15.0 SAPPH10
PRYEDBW 41001 XMLCHART 6400.0.15.1003 SAPKG10
PRYEDBW 41001 ZIPPER 6400.0.15.2 SAPPH10
PRYEDBW 41002 BWGIS 6400.0.15.10 SAPPH10
PRYEDBW 41002 CHART 6400.0.15.1007 SAPGFW
PRYEDBW 41002 IMGCONV 6400.0.15.0 SAPPH10
PRYEDBW 41002 XMLCHART 6400.0.15.1003 SAPKG10
PRYEDBW 41002 ZIPPER 6400.0.15.2
but i have restart the igs after each upgrade. Must i erase de rfc link and recreate them? or is there any way to upgrade this informations?

Web Application Designer : change navigation_pane

Hi BW' experts,
I'm working from a SAP web template and BI 7.
My data provider is a query still created with BEx.
I would change my navigational pane where there are free characteristics (filter) at te left of the query (in BEx).
Some fields are hidden in the query, but they are displayed in the filter.
I want to hide them in my specific web template in the filter.
I hope you could help me.
Points will be assigned.
Cheers,
Vince.

Vince,
Select your Generic Nav Block, select the Web Item tab and go into List of Characterisitc. Tailor that to look at only the characterisitc you want the user to see.
Regards
Gill

Web application designer UI change

Hi all,
In a web application designer i have added an analysis item with query as data provider.
In the output I have a requirement to change the color of individual data cell in a analysis item.
I want to personalize the individual row or a data cell instead of changing whole data cells.
Is there any way to change the color of individual row or some rows or some particular values in the analysis item to different color or bold selecting based on the values of the output like personalization.
Thanking You,
Devi

Hi,
We are using 7.0
Personalize means the options we get when we right click on an data cell in the browser after executing
the templete.
I want to personalize a single data cell instead of all the data cells or structure at once.
Thanking You,
Devi

Change Layout Web Application Designer

Hello Gururs.
Here's the question:
I'm creating a Web Application Designer Template. When I execute it in the web, the variable screen has certain colors (kind of blue colors) the standard, but after inputing the variables when I click on Ok button, the display of the query is very mediocre, i.e., the standard, is representing the query in a table with the columns and rows in gray!
I would like to change these colors, but I don't know how.
I believe that in older versions you used to have an option in WAD of choosing the stylesheet (CSS), that now in the 7.0 version is unavailable.
How can I change the layout presentation of the queries format in the WAD?
Thank You,
Diogo Ferreira.

Hi Diogo,
The table colors are from the EP settings.
I often insert a line like this in the head of the template:
<style type="text/css" >.urSTSHL2 { background-color:#CCDAF6 } .urSTSHL1 { background-color:#CCDAF6 }</style>
It will overrule the standard CSS from the EP and it also works with IP queries.
The alternative is to change the overall setting or change theme in the EP.
Hope this helps.
BR
Stefan

BEx Web Application Designer - formatting text_item

Hello,
I'm a newbie at the Web Application Designer and I collected my first experience in it. Now I am having a problem with the formatting from a text_item. Afterward changing the font size and color, I saved the report but nothing changed. I ticked the attribute 'Display Text Only' from the text_item and specified the horizontal alignment of the text_item and it worked. If I change the font size and font attribute to "bold", it doesn't work.
Have anyone a solution? Thank you for helping!
Kind regards
Tobias Kreuser

Hi Stefan,
I don't know where I write the <(remove) b> Object < (remove)/b> in the code. Because my code is displayed different as your. The name of the text-items are "text_item_1" and "text_item_2".
Here is my code:
<bi:GROUP_ITEM name="GROUP_ITEM_ANALYZE" designheight="600" designwidth="600" >
                            <bi:CHILD_ITEM_REF value="CONTAINER_LAYOUT_ITEM_3" />
                            <bi:PADDING value="X" />
                            <bi:GROUP_DESIGN value="SECONDARYCOLOR" />
                            <bi:WITH_CAPTION type="CHOICE" value="" />
                            <bi:CONTAINER_LAYOUT_ITEM name="CONTAINER_LAYOUT_ITEM_3" designwidth="600" designheight="600" >
                                <bi:ROW_LIST type="ORDEREDLIST" >
                                    <bi:ROW type="ORDEREDLIST" index="1" >
                                        <bi:COLUMN type="COMPOSITE" index="1" >
                                            <bi:CHILD_ITEM_REF value="TEXT_ITEM_1" />
                                            <bi:COLSPAN value="1" />
                                            <bi:HALIGN value="CENTER" />
                                        </bi:COLUMN>
                                        <bi:COLUMN type="COMPOSITE" index="2" >
                                            <bi:CHILD_ITEM_REF value="TEXT_ITEM_2" />
                                            <bi:COLSPAN value="1" />
                                            <bi:HALIGN value="CENTER" />
                                        </bi:COLUMN>
                                    </bi:ROW>
<bi:TEXT_ITEM name="TEXT_ITEM_1" designheight="70" designwidth="200" >
                                    <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                        <bi:TEXT_CONTENT value="TOP" />
                                    </bi:TEXT_BINDING>
                                    <bi:TEXT_DESIGN value="EMPHASIZED" />
                                    <bi:RENDER_AS_TEXT value="X" />
                                </bi:TEXT_ITEM>
                                <bi:TEXT_ITEM name="TEXT_ITEM_2" designheight="70" designwidth="200" >
                                    <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                        <bi:TEXT_CONTENT value="BAD" />
                                    </bi:TEXT_BINDING>
                                    <bi:TEXT_DESIGN value="EMPHASIZED" />
                                    <bi:RENDER_AS_TEXT value="X" />
                                </bi:TEXT_ITEM>
Perhaps you can help me with my code?
Kind regards
Tobias

Web Application Designer need help ASAP

Hi All,
I have a requirement to customize the analysis item in a web application designer.
I have created new templetes and added a analysis with a query view as data provider .
in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
Thanking You,
Rukmini

Dear Devi,
If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
The Modification parameter provides modules whose use can be controlled using additional parameters.
This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
Prerequisites
The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
Procedure
You use the modules as follows:
       1.      Select a module from the sample modules.
       2.      Specify the module in the Modification parameter of the Analysis Web item.
       3.      Control the display and behavior of the module by specifying the module-specific parameters.
Result
The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
Example
For example, you can define a fixed column width or display comments in cells.
For more info :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat..

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Web Application Designer: Column width on analysis_item with BW 7.0

Hi,
I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:
<b>
1. Is it possible to hard-code/specify column widths of the analysis_item?
2. The property width of the analysis_item doesn't work, does it?
</b>
Thanks for your time and efforts.
Message was edited by:
Daniel Rubio

Hi,
I have just discovered the capability of modifying columns widths with css properties.
So if I add to the head section of the html:
div.prueba2 .urSTTDBdr1
div.prueba2 .urSTTDBdr
div.prueba2 .urSTTDBdr2
And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
Thanks

Hiding table columns in web application designer

Hi,
Can anyone please tell me how to hide the columns of a table which im using in a web application template as analysis. E.g : if i have 7 columns in my table and i dont want to show that particular column i.e 7th and m using the same query somewhere else also to show other information so i cannot change my query but i want to hide it at web application designer level.
Any help will be appreciated.
Thanks & Regards

Hi Preetha,
I think best solution to your problem(keeping future enhancements in mind) is to create a query view based on the query that you are using.
Move the unwanted characteristics to free chars section or hide the unwanted key figures.
Then resave this query view.
You can use this query view as a data provider to this table.
Hope this helps.
Thanks and Regards,
Anup Kulkarni

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

Bex Web Application Designer issue: portal communication error

hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudi

hi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi

Web Application Designer uses wrong server name

Hello,
I am using BI under NW04s.
When I execute a web template in Web Application Designer it opens up the url with the server name without it's FQDN name and than I get: "URL used, <URL>, is invalid; distributed session management (DSM) cannot function. See SAP Notes 596698 and 654326.
I've looked at these notes but I don't see how it can solve my problem.
I've already followed the suggestions in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=279031">this</a> thread including checking RZ10 and RSPOR_T_PORTAL table.
Any other ideas...?
Roy

Hi,
try maintaining parameter <b>icm/host_name_full</b> in SMCIM (goto/parameters/change).
hope this helps...
Olivier.

Query on WAD (Web Application Designer)

We have got request from the user on one WAD u2013 Web Application Designer Report for the extra functionality.
This WAD report contains 7 tabs, for each tab there is a separate query view has bee designed with default variable values.
While running the WAD report user will input values in the variable window for the variables (Eg: Fiscal Year, Org.Structureu2026etc), after executing the report, if the user switch to another tab in the same report, the variable values entered before execution of the report will not pass to the another tab by default because the query views have been designed in such a way that each query view will have its own default values.
Now the user is expecting the variable values entered for the first tab should be passed to other tabs as well, is it possible to pass values from one tab to another tab?
If its possible, could you guide us where (HTML code or web template parameters or any another things) exactly the required changes/modifications need to be made in WAD report?
Thanks in advance.

hi vishal ,
You are right .At first i did not get you solution
but later i treid some random seletion propeties for the text web item.
I got it.
Steps:
1. Place the text element in the right panel of wad.
2. Go to properties of test element.we have two in this 1.General 2.specific.
3. In specific we have the Display General Text Elements.Checkthis Check box
4.save.
Now you can see the ouptput.
But not only last loaded date but also other details like
Last change by,created by,..refreshed date..etc

Web Application Designer change font

Similar Messages

Maybe you are looking for