Web Application Designer Charts size shrink

HI ,
We have recently upgraded our BW system from BW 3.5 to BI 7.0 as a part of which we have upgraded our web templates in WAD 7.0 as well. Post this, the Charts that are available in the web templates have shrinked/reduced in size in the new system compared to the older system and the labels have got toppled. We have not done any changes on the web templates apart from opening and saving them in WAD 7.0.
Please advise.
Regards,
SUbhash

Hi Subhash,
The migration of web templates from 3.x to 7.0 has one of these difficulties. We faced many such issues ourselves.                   Most web items like charts do not get migrated specially if they have been defined by some classes and parameters in 3.x.
The best solution in this case is to go to those web items and drag the required type of chart and assign the dataprovider to it. Also, to define the charts with specific propserties in case they were present in 3.x version.

Similar Messages

  • Web Application Designer - Chart (Bar Chart) - Value description of chart

    Hi Community,
    i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000  and much more. The description in the chart lokks like  10000000  - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
    Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

    After applying IGS patch. It is resolved.

  • Web Application Designer Chart with additional Line

    Hi Guys,
    today a customer asked me to insert a line into a WAD Chart.
    This customer wants to show with this line the plan income.
    So it's an easy horizontal line, but i dont know how to insert this into the chart...
    I tried to do it with a trendline, but i didnt succeed to format this trendline as a horizontal...
    Pls help, thanks!

    Hi
    In web template there is no option to enter the value and display it in the chart.
    Always it reads the data from the report and displays in the required format like chart or table etc..
    If you want to display the entered value based on the sales dept then you need a transactional cube where the user can enter the Value via BPS dialouge and that can be displayed in a keyfigure in the report so that you will get the display in the Chart (Line)
    Regards
    Ram

  • Web Application Designer Chart settings disappear when WAD is opened again

    Hi experts,
    i am bulding a dashboard with several speedos and other kind of charts with WAD 7.0.
    When i save my Webtemplate and re-open it again - all my chart settings of the Speedos are gone - all of them are only a few pixels in size then and unreadable. After setting all parameters back to the desired values and saving it again. I can execute the Webtemplate and its is showed as it should be.
    But when i close the WT and open it again - the game starts from the beginning and i have to set all parameters again.
    Any Ideas?
    thanks!
    cu
    Dominik
    PS: WAD Version is: 7.X Support Package 14 Patch 1 Revision 354
    Edited by: Dominik Lanzenberger on Apr 1, 2008 2:17 PM

    Hi Dominik,
    Try reinstalling WAD in your system. Hope this may solve your problem.
    Regards,
    KK.

  • Web Application Designer: Chart loading Error.

    Hello Experts,
    Could you please suggest. I have included the Chart Web Item > defined the DataProvider. When I execute the web template, I get this error.
    "Error When Calling Up IGS (partner not reached (host bwdbp1.ct.pb.com, service sapgw00) / CPI-C err)"
    Any suggestions appreciated.
    Thanks,

    Hi,
    is the IGS configured correctly? Restart the IGS service.
    test the IGS connection using programs BW_IGS_CHART_TEST and BW_IGS_ADMIN
    Heike

  • Web Application Designer - Chart Item - BW Release 3.5

    Hello,
    I have a problem with the new chart item in BW 3.5.
    I cannot show the data table within the chart item.
    In BW 3.0B there was an easy possibilty to switch "show data table" on/off.
    Please help!
    Thanks in advance

    Hi Tim,
    You can still do this, but you will need to add it to the HTML code.
    See the last attribute in this for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/489d39d342de00e10000000a11402f/content.htm
    Hope this helps...

  • Chart problems in Web-Application Designer

    Hello,
    I am trying to use CHART in Web Application Designer.
    But whatever TYPE I select in that (pie/stack/..),
    It shows the report with default chart type..
    Then after one /two trials, I have run time error. & Web application Designer crashes. In preview of that chart on template, it shows the chart type I have selected.
    What am I missing in my steps. Or is some library missing..
    Thanks for you suggestion.
    Is very urgent & as I need to show report tomorrow.
    Regards,
    Santosh

    Hi Santosh,
    <b>Defining the Width and Height of the Entire Chart</b>
    in the Properties
    Enter the desired values in fields Width and Height of the window in which you are editing the chart. The entries should be in pixels.
    Choose Apply.
    The size of the entire chart is changed according to your specifications.
    Changing the Size of the Entire Chart with the Mouse
    Point to the border of the preview window with the mouse.
    The cursor becomes a double arrow.
    Click on the border and pull the preview window to the required size.
    The size of the entire chart is changed when you let go of the mouse key.
    Changing the Size of the Plot Area or the Legend with the Mouse
    Click on the element whose size you want to change (plot area or legend).
    The element is enclosed in a move handle.
    Point to one of the move handles with the mouse.
    The cursor becomes a double arrow.
    If the cursor does not become a double arrow, you might not have selected the right element, for example the chart area instead of the plot area. In this case click again on the element whose size you want to change.
    Click on the move handle and keep the mouse key pressed.
    The cursor becomes a cross.
    Pull the element to the desired size.
    The size of the element is changed when you let go of the mouse key.
    Avoid stretching the plot area over the whole area of the chart. The outermost border of the plot area disappears from the visible area in this case and cannot be clicked on again. You cannot change the size of the plot area. If you made the plot area too large by accident, you can undo it with the menu option Undo in the context menu. You can reset the plot area to its original size with Reset, but you will lose all the changes you made to the chart.
    <i><u><b><b><b><b>
    It is simple issue D't worry..And one morething is  Check the <b>Specific Properties</b> of the Template</b></b></b></b></u></i> in Design of the web template.
    Thanks
    Bhima Chandra Sekhar

  • Problem - over lie of data series in Line chart (Web Application Designer)

    Dear Experts,
    I have created a chart with below requiments from my user by using web application designer.
    1) Key Figure 1 (Chart type -> column )
    2) Key Figure 2 (Chart type -> column )
    3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
    4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
    The line chart of Key Figure 3 must always appear in Front then others Key Figures.
    Then following by, Key Figure 4. Last is Key Figure 5.
    As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
    1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
    2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
    So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
    Please advice me if you have any suggestion on controlling the lines order.
    Thanks!
    ~ GP
    Edited by: GP Poh on Jun 9, 2010 12:32 PM

    Hi Priya, thanks for input.
    I think I should further elaborate the problems. Thanks for your highlight.
    I have a lines chart with five key figures. So my chart will have five lines.
    Some lines from chart will overlap if the data are same.
    When overlapping of lines happens, I want to control the order of which series should be appear first.
    Likes below example,
    1) Key Figure 1 (Chart type -> column )
    2) Key Figure 2 (Chart type -> column )
    3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
    4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
    5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
               KF1  KF2  KF3  KF4  KF5
    CW 1    30     30    80    80    50
    CW 2    40     50    90    60    90
    CW 3    70     50    90    90    90
    CW 4    80     70    70    90    70
    As you can see, there is overlap in these value.
    CW 1 KF3, KF4  -->80
    CW 2 KF3, KF5 --> 90
    CW 3 KF3, KF4, KF5 --> 90
    The order which i want the series should appear first when overlapping.
    - KF3 must appear on top.
    - Then, follow by KF5
    - Last is KF4.
    So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
    Feel free to give me any input!

  • Chart Interface In web application designer?

    Hi experts:
          I want to know if there is chart interface in web application designer?when i click a node in the chart ,it can triggle a js to jump to another page to show the detail? how I can do it?
         I think there do have method to implement,as when I put the mouse on the node of the chart ,the "javascipt:;" shows in the status bar of the IE ,I don't know where can I write the JS ?
    Best Regards
    chan.

    Hi Chan,
    1. You type tcode RSBBS in BW system
    2. Under Query Tab, there is 'Sender' field. You input the the origin query.
    3. Click 'Create' button, you choose the report type that you want to jump into. In you case, if you want to jump into a web template, choose 'BW Web Application'
    4. In 'Report' field, choose the destination query/web template.
    For more details, please look at this link
    http://help.sap.com/saphelp_erp2004/helpdata/en/c9/bc2d38c4b3f205e10000009b38f8cf/content.htm
    Hope it will help.
    Cheers,
    Mona

  • Navigational charts in Web Application Designer

    Hello all,
    I have a question regarding actionable charts in Web Application Designer. For example a user selects a bar in a chart and based on that selection filters to additional reports or changes existing charts/tables in the Web Application Designer? I know you can right click and setup RRI then goto functionality but I would like the capability to click on the bar chart and then proceed with the action.
    I know this can be done with Geo enabled Map Web Items where you click on a state/country and drill in for additional information but I'd like to know if it can be done with in charts. I know there is an option in WAD to setup Eventing, maybe there you set the onclick event to do the function?
    Any help is appreciated.
    Thanks.

    Does anyone have any suggestions? I keep reading its possible but found no examples.
    Thanks,

  • Web Application Designer: Change Table Chart to Line Format

    Dear Experts,
      We, as novices of the web application designer, encounter a problem in using this program. After having created a Chart table, we cannot changed it to the line format.
    The things that we perform are as follows:
    1) Right click and choose lines format
    2) Give it all titles
    3) Click Next until finish
    However, the result is still the chart table. Is there anyone who kindly give me steps of how to change it.

    Hi,
    Please try the following:
    1. Highlight the chart.
    2. In the Web Item Properties for chart, go to Edit Chart.
    3. Click on the ... incon
    4. Pick Lines
    5. Pick a type of Lines graph.
    6. Follow the wizard to change the required properties.
    This should work for you.
    Regards,
    Xibi

  • Web Application Designer broadcast select Web Items

    Hello all,
    I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding"  Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
    Thank you in advance!

    Found it:
    - New Button
    - Action = Command
    - Commands for DataProviders/ Hierarchies / SET_HIERARCHY

  • Print a Web Template with Web Application Designer 3.X

    Hello
    I would know how I can print a web template made with Web Application Designer 3.X and that it is in the Intranet.
    Actually I'm printing that page with the option of the browser (Internet Explorer) but it print only I see, no print all the chart and the rest of the columns.
    How can I print all the data that compose  the web template?
    Thank you.

    Hello Sharath,
                         First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
    then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
    hope it is clear,
    assign points if useful.

  • Web Application Designer ver 3 vs Standard Web base on Query designer

    Hi All,
    *. How to get the detail information regarding the standard template that have been created by SAP when we click the button 'Display Query on the Web'
    The standard template quiet useful , however we trying to make the graph bigger.
    *. In Web application designer, we put 1. Generic Navigation Block, Table and Chart. But we cant find how to make Generic Navigation block and table in same row as it is shown in standard template.
    Please Advice.
    Cheers,
    Nies

    Hi,
    Please check the URL:
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/499d398b45160ae10000000a11402f/frameset.htm
    Thanks,
    Venkat

  • BEx Web Application Designer - formatting text_item

    Hello,
    I'm a newbie at the Web Application Designer and I collected my first experience in it. Now I am having a problem with the formatting from a text_item. Afterward changing the font size and color, I saved the report but nothing changed. I ticked the attribute 'Display Text Only' from the text_item and specified the horizontal alignment of the text_item and it worked. If I change the font size and font attribute to "bold", it doesn't work.
    Have anyone a solution? Thank you for helping!
    Kind regards
    Tobias Kreuser

    Hi Stefan,
    I don't know where I write the <(remove) b> Object < (remove)/b> in the code. Because my code is displayed different as your. The name of the text-items are "text_item_1" and "text_item_2".
    Here is my code:
    <bi:GROUP_ITEM name="GROUP_ITEM_ANALYZE" designheight="600" designwidth="600" >
                                <bi:CHILD_ITEM_REF value="CONTAINER_LAYOUT_ITEM_3" />
                                <bi:PADDING value="X" />
                                <bi:GROUP_DESIGN value="SECONDARYCOLOR" />
                                <bi:WITH_CAPTION type="CHOICE" value="" />
                                <bi:CONTAINER_LAYOUT_ITEM name="CONTAINER_LAYOUT_ITEM_3"  designwidth="600" designheight="600" >
                                    <bi:ROW_LIST type="ORDEREDLIST" >
                                        <bi:ROW type="ORDEREDLIST" index="1" >
                                            <bi:COLUMN type="COMPOSITE" index="1" >
                                                <bi:CHILD_ITEM_REF value="TEXT_ITEM_1" />
                                                <bi:COLSPAN value="1" />
                                                <bi:HALIGN value="CENTER" /> 
                                            </bi:COLUMN>
                                            <bi:COLUMN type="COMPOSITE" index="2" >
                                                <bi:CHILD_ITEM_REF value="TEXT_ITEM_2" />
                                                <bi:COLSPAN value="1" />
                                                <bi:HALIGN value="CENTER" />
                                            </bi:COLUMN>
                                        </bi:ROW>
    <bi:TEXT_ITEM name="TEXT_ITEM_1" designheight="70" designwidth="200" >
                                        <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                            <bi:TEXT_CONTENT value="TOP" />
                                        </bi:TEXT_BINDING>
                                        <bi:TEXT_DESIGN value="EMPHASIZED" />
                                        <bi:RENDER_AS_TEXT value="X" />
                                    </bi:TEXT_ITEM>
                                    <bi:TEXT_ITEM name="TEXT_ITEM_2" designheight="70" designwidth="200" >
                                        <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                            <bi:TEXT_CONTENT value="BAD" />
                                        </bi:TEXT_BINDING>
                                        <bi:TEXT_DESIGN value="EMPHASIZED" />
                                        <bi:RENDER_AS_TEXT value="X" />
                                    </bi:TEXT_ITEM>
    Perhaps you can help me with my code?
    Kind regards
    Tobias

Maybe you are looking for

  • Level of profit centers

    Hi All Could you please tell at what level ( level 5 or level 9 ) are the profit centers maintained in SAP. For example how to find the level of FRBs in the table BSIS. Also if anybody can explain me the concept of cost centers, profit centers and co

  • IPhoto 9.5 won't recognize USB card reader.

    I loaded Mavericks this week with iPhoto 9.5. But now iPhoto will not read a card reader and gives me a message that the card reader was ejected improperly. When I force quit iPhoto and reopen, it won't open the card reader so I can import pictures.

  • Join switch ports together

    cisco 2651XM router IOS: c2600-adventerprisek9-mz.124-15.T9.bin NM-16-ESW switch fitted regarding the switch ports (F1/0 to F1/15): is there a command that will join two or more switch ports together and make them act as plain hub ports?

  • Diag mode results

    Hey guys, I'm not sure what to make of this diagnostic stuff. Could you help me figure out what's up with my IPod? For the 5-in-1 test the results were: SDRAM PASS CHKSUM: 64718 OK RTC: 50 USBFAIL NOCON Besides that my IPod always freezes when I try

  • How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?

    How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?