Web Application Designer - Columns and Navigation Block

Hello,
I have problems concerning a web application.
The names of the columns are not displayed and the columns are not displayed in the navigation block.
Maybe you have experience with this problem and can give me some hints.
I'm looking forward to your answer!
Best regards.

Hi,
see this thread for getting colum names:
Re: Accessing table column names from WAD
thnks.

Similar Messages

Web Application Designer: Column width on analysis_item with BW 7.0

Hi,
I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:
<b>
1. Is it possible to hard-code/specify column widths of the analysis_item?
2. The property width of the analysis_item doesn't work, does it?
</b>
Thanks for your time and efforts.
Message was edited by:
Daniel Rubio

Hi,
I have just discovered the capability of modifying columns widths with css properties.
So if I add to the head section of the html:
div.prueba2 .urSTTDBdr1
div.prueba2 .urSTTDBdr
div.prueba2 .urSTTDBdr2
And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
Thanks

Hiding table columns in web application designer

Hi,
Can anyone please tell me how to hide the columns of a table which im using in a web application template as analysis. E.g : if i have 7 columns in my table and i dont want to show that particular column i.e 7th and m using the same query somewhere else also to show other information so i cannot change my query but i want to hide it at web application designer level.
Any help will be appreciated.
Thanks & Regards

Hi Preetha,
I think best solution to your problem(keeping future enhancements in mind) is to create a query view based on the query that you are using.
Move the unwanted characteristics to free chars section or hide the unwanted key figures.
Then resave this query view.
You can use this query view as a data provider to this table.
Hope this helps.
Thanks and Regards,
Anup Kulkarni

Freeze a Column in WAD (Web Application Designer)

Hi,
I have a web template in WAD that has an analysis_item, which data provider (DP1). The data provider (DP1) has a query attached to it.
My goal is to be able to freeze a column (data column) in the analysis_item.
I looked at all the properties of the analysis_item, but I didn't find any properties that I can use to freeze a column. I saw another discussion thread on Freezing column and rows, but there wasn't an answer for it in that thread.
I even tried to search for a way to freeze a column using JavaScript , and I found the link below using CSS (cascading style sheet) to accomplish the freezing of a column for a non SAP web application. However, I was not able to figure out how to apply this method in WAD and specifically in the analysis_item.
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
Do you know any method to freeze a column when displaying data via the analysis_item?
I would really appreciate any suggestion you have.
Thank you,
Katelyn

Dear Katelyn Dang ,
Freeze column
On the properties tab select table. goto web item tab. in number of data columns displayed put value as 4. (you can change as per ur need).
Also go through thes links
http://web.tampabay.rr.com/bmerkey/examples/locked-column.css.html
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
For visiblity
you can set visible rows and columns in the specific properties of web item table! Just click the table in the Web Application Designer and than look into the specific properties. Select "Number of Data Rows..." or "Number of Data Columns..." as you wish!
Hope it helps
Regards
Bala

Navigational charts in Web Application Designer

Hello all,
I have a question regarding actionable charts in Web Application Designer. For example a user selects a bar in a chart and based on that selection filters to additional reports or changes existing charts/tables in the Web Application Designer? I know you can right click and setup RRI then goto functionality but I would like the capability to click on the bar chart and then proceed with the action.
I know this can be done with Geo enabled Map Web Items where you click on a state/country and drill in for additional information but I'd like to know if it can be done with in charts. I know there is an option in WAD to setup Eventing, maybe there you set the onclick event to do the function?
Any help is appreciated.
Thanks.

Does anyone have any suggestions? I keep reading its possible but found no examples.
Thanks,

What is difference in WEB application designer in bw and bi

what is difference in WEB application designer in bw and bi
new features available in bi

Hi Naman,
Please go through this wonderful link:
bw 7.0
Hope this helps...
Regards,
Habeeb
Assign points if helpfu...

Difference Between Web application design and Report Designer

Hi,
I have searched in the forum as well i Google it but still i am not clear the difference between Web application Designer and report Designer , why especially we go for WAD ? and what is not possible in Report designer which we can do in WAD Please some one explain me that would be great helpful to me. i am having lot of confusion in this issue.
thanks,
Gal

Hi,
The Report designer is completely for formating of your query and results. Here you have the flexibility to design your query(one/more) results in your own way.
The WAD is for displaying various web items at one short for a single/multiple query. And here you have the flexibility to do the XML coding on the web items, but not as much you have the flexibility on Report Designer.
But, Report designer will have more performance issues than WAD. So, generally it helps when you need extreme formating of your reports.
Hope this clears your doubt.
Regards,
Srinivas.

Web Application Designer ver 3 vs Standard Web base on Query designer

Hi All,
*. How to get the detail information regarding the standard template that have been created by SAP when we click the button 'Display Query on the Web'
The standard template quiet useful , however we trying to make the graph bigger.
*. In Web application designer, we put 1. Generic Navigation Block, Table and Chart. But we cant find how to make Generic Navigation block and table in same row as it is shown in standard template.
Please Advice.
Cheers,
Nies

Hi,
Please check the URL:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/499d398b45160ae10000000a11402f/frameset.htm
Thanks,
Venkat

Web Application Designer need help ASAP

Hi All,
I have a requirement to customize the analysis item in a web application designer.
I have created new templetes and added a analysis with a query view as data provider .
in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
Thanking You,
Rukmini

Dear Devi,
If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
The Modification parameter provides modules whose use can be controlled using additional parameters.
This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
Prerequisites
The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
Procedure
You use the modules as follows:
       1.      Select a module from the sample modules.
       2.      Specify the module in the Modification parameter of the Analysis Web item.
       3.      Control the display and behavior of the module by specifying the module-specific parameters.
Result
The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
Example
For example, you can define a fixed column width or display comments in cells.
For more info :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat..

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Creating Views in Web Application Designer

Is there a way in which we can create different navigational views for a query in Web Application Designer. Can anyone give me a step by step process for the same.
Thanks,
Neha.

Wond,
I have created a query in the Bex query designer and when i am trying to do a SAVE AS its only allowing me to save it in either favorites or roles. I want to save it as one view and build a few views with different key figures and have all the views in a drill down fashion so that when the end-users run the query, by running a specific view they will get all the relevant data. How can I achieve this is query designer. Could you explain elaborately.
Thanks Again,
Neha.

Print a Web Template with Web Application Designer 3.X

Hello
I would know how I can print a web template made with Web Application Designer 3.X and that it is in the Intranet.
Actually I'm printing that page with the option of the browser (Internet Explorer) but it print only I see, no print all the chart and the rest of the columns.
How can I print all the data that compose the web template?
Thank you.

Hello Sharath,
First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

Change Layout Web Application Designer

Hello Gururs.
Here's the question:
I'm creating a Web Application Designer Template. When I execute it in the web, the variable screen has certain colors (kind of blue colors) the standard, but after inputing the variables when I click on Ok button, the display of the query is very mediocre, i.e., the standard, is representing the query in a table with the columns and rows in gray!
I would like to change these colors, but I don't know how.
I believe that in older versions you used to have an option in WAD of choosing the stylesheet (CSS), that now in the 7.0 version is unavailable.
How can I change the layout presentation of the queries format in the WAD?
Thank You,
Diogo Ferreira.

Hi Diogo,
The table colors are from the EP settings.
I often insert a line like this in the head of the template:
<style type="text/css" >.urSTSHL2 { background-color:#CCDAF6 } .urSTSHL1 { background-color:#CCDAF6 }</style>
It will overrule the standard CSS from the EP and it also works with IP queries.
The alternative is to change the overall setting or change theme in the EP.
Hope this helps.
BR
Stefan

BEx Web Application Designer - formatting text_item

Hello,
I'm a newbie at the Web Application Designer and I collected my first experience in it. Now I am having a problem with the formatting from a text_item. Afterward changing the font size and color, I saved the report but nothing changed. I ticked the attribute 'Display Text Only' from the text_item and specified the horizontal alignment of the text_item and it worked. If I change the font size and font attribute to "bold", it doesn't work.
Have anyone a solution? Thank you for helping!
Kind regards
Tobias Kreuser

Hi Stefan,
I don't know where I write the <(remove) b> Object < (remove)/b> in the code. Because my code is displayed different as your. The name of the text-items are "text_item_1" and "text_item_2".
Here is my code:
<bi:GROUP_ITEM name="GROUP_ITEM_ANALYZE" designheight="600" designwidth="600" >
                            <bi:CHILD_ITEM_REF value="CONTAINER_LAYOUT_ITEM_3" />
                            <bi:PADDING value="X" />
                            <bi:GROUP_DESIGN value="SECONDARYCOLOR" />
                            <bi:WITH_CAPTION type="CHOICE" value="" />
                            <bi:CONTAINER_LAYOUT_ITEM name="CONTAINER_LAYOUT_ITEM_3" designwidth="600" designheight="600" >
                                <bi:ROW_LIST type="ORDEREDLIST" >
                                    <bi:ROW type="ORDEREDLIST" index="1" >
                                        <bi:COLUMN type="COMPOSITE" index="1" >
                                            <bi:CHILD_ITEM_REF value="TEXT_ITEM_1" />
                                            <bi:COLSPAN value="1" />
                                            <bi:HALIGN value="CENTER" />
                                        </bi:COLUMN>
                                        <bi:COLUMN type="COMPOSITE" index="2" >
                                            <bi:CHILD_ITEM_REF value="TEXT_ITEM_2" />
                                            <bi:COLSPAN value="1" />
                                            <bi:HALIGN value="CENTER" />
                                        </bi:COLUMN>
                                    </bi:ROW>
<bi:TEXT_ITEM name="TEXT_ITEM_1" designheight="70" designwidth="200" >
                                    <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                        <bi:TEXT_CONTENT value="TOP" />
                                    </bi:TEXT_BINDING>
                                    <bi:TEXT_DESIGN value="EMPHASIZED" />
                                    <bi:RENDER_AS_TEXT value="X" />
                                </bi:TEXT_ITEM>
                                <bi:TEXT_ITEM name="TEXT_ITEM_2" designheight="70" designwidth="200" >
                                    <bi:TEXT_BINDING type="CHOICE" value="TEXT_CONTENT" >
                                        <bi:TEXT_CONTENT value="BAD" />
                                    </bi:TEXT_BINDING>
                                    <bi:TEXT_DESIGN value="EMPHASIZED" />
                                    <bi:RENDER_AS_TEXT value="X" />
                                </bi:TEXT_ITEM>
Perhaps you can help me with my code?
Kind regards
Tobias

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Web Application Designer - Columns and Navigation Block

Similar Messages

Maybe you are looking for