Web Application Designer Opening Error

Hello Experts,
I can open the WAD. After that if I try to open any of the web reports I get this error.
'Internal Error: No template property standard item'
Any suggestions appreciated.
Thanks,
BWer

Hi BWer,
You can try the following.
in the Temp folder (%temp%) is folder bw. rename or delete this folder. in the %temp% folder are also files which begin with SAPBWWebApplicationDesigner. delete these files too.
then restart the WAD. Then it should normally.
if not you can press the new button in the toolbar, which also forces the WAD to initialize
i hope this helps.
best regards.
kai Wachter

Similar Messages

BEx Web Application Designer Execution Errors

Hi there,
When I execute report via BEx Web Application Designer, the error message is shown as
The metadata of "ITE" "CHART_ITEM" are incorrect for parameter "LEGEND_POSITION"
The metadata of "ITE" "CHART_ITEM" are incorrect for parameter "LEGEND_POSITION"
I can not get the review form.
Did anyone meet this problem? How to resolve it?
Thanks in advance
Edited by: Jonas Sun on Oct 2, 2008 12:40 PM
Edited by: Jonas Sun on Oct 2, 2008 12:41 PM

Hi
In the XHTML code for the web template check the value being assigned to LEGEND_POSITION . If its some worng value assigned then please chnage it and execute the web template.

Web Application Designer -Unknown Error Occured during Portal Communication

we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

BEx Web Application Designer Runtime Error 398

Whenever I close a Template Window the runtime error "398: Application-defined or object-defined error" occurs.
This error happens since about 1 week - before there weren't any problems. The error occurs for each template that is closed.

Hi all,
if you would search in OSS or in the forum you would find note 819131
or topic
WAD run-time error message
Kind regards
Heike

Unable to open WAD (web application designer) in BW 3.5!

Hi,
when i open WAD through menu path (start->programs
->Business explorer->Web application designer), i am getting the following error!
WADConst
Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
can any one expalin me what is this problem? and suggest me to over come this problem?
Thanks,
Ravi

Hi Ravi!
I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
You have to use this version of the BEx Web Application Designer.
If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
Thank you,
Tobias

Unable to open WAD (Web Application Designer) SAP BW 3.x

Hi experts
In my computer I don´t open WAD (SAP BW 3.x)
i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
appears following error:
This application requires Internet Explorer 5 or higher
but I have installed the Internet Explorer 8 version
then I do not understand because can´t run the WAD 3.x
Can anyone help me? please
Thanks

Hi ashutosh
the following information of SAP GUI:
Component: SAPLogon for Windows
Release: Final Release 720
Fichero: saplogon.exe
vers.Fichero: 7100.4.17.1045
Build: 1147943
Patch Level: 17
whether if it is which version of WAD but I am interested in running and to open the Web Application Designer in any of the versions: 3.x or 7.0, but the important is that can be work with some WAD model because in version Web Application Designer 7.0 is enable pero when i search some WAD model (I know that it exists in the system) The system search says it does not exist or no found.
I can't try uninstalling because I'm not a support person so I have not authorization, I'm a consultant and only want to work with WAD models

Unable to open WAD (Web Application Designer) 3.x

Hi experts
In my computer I don´t open WAD (SAP BW 3.x)
i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
appears following error:
This application requires Internet Explorer 5 or higher
but I have installed the Internet Explorer 8 version
then I do not understand because can´t run the WAD 3.x
Can anyone help me? please
Thanks

HI,
Please run the installation check as per note 1229206 and attach the result to the message.This is typically a front end installation issue May be dhtmled.ocx is not registered on this PC This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
   'REMOVE SAP FRONTEND'
- Install the newest frontend and GUI patch and check the installation
   again with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 197460 and
ensure there are no errors.
Please refer to following Notes for GUI patch and front end patch:
578944     Expected release dates for SAP GUI for Windows
558994     General information on BW front-end patches
535308     How to apply a SAP Front End patch?
96885      Downloading frontend patches
You can download the latest patches from the following url,
Goto URL: http://www.service.sap.com/swdc
SAP Software Distribution Center -> Download -> Support Packages and
Patches -> Browse our Download Catalog -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.20 CORE -> win32 ->
patch 9.
Also you can download the latest BI addon and BW addon from the
following url,
Please goto
-> service.sap.com/patches
-> entry by application group
-> SAP Frontend Components
For BI add-on,                          For BW add-on,
     -> BI ADDON FOR SAP GUI 7.20       -> BI ADDON FOR SAP GUI 7.20
     -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
     -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
     -> Win32                           -> Win32
     -> Apply the latest frontend       -> Apply the latest frontend
        patch 500                         patch 8
Please install the GUI and Business Explorer patches in this sequence:
1. SAP GUI
2. BI 7.0 ADDON FOR SAP GUI 7.20
3. BW 3.5 add for GUI 7.20
https://service.sap.com/swdc
Installations and Upgrades
    Browse our Download Catalog
      SAP Frontend Components
         SAP GUI FOR WINDOWS
            SAP GUI FOR WINDOWS 7.20 CORE
              Installation
       50105790_4 NW 7.0 Presentation - 7.20 Compilation 3 Present.1/2
Regards,
Naveen.

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Opening template issue in Web Application Designer (Loading problem)

Hi,
When i open a query in Web Application Designer through the BWdev, it is opening but when i open a query in Web Application Designer through the BWProduction it is not opening, it is displaying a msg box like this
" Operation Failed! NO detailed error information from backend available ".
In the opening of the webtemplate itself it is showing that box when loading mime type imgs.
If anybody knows pls send msg.
Thanks & Regds,
Giri.

Hi Giri,
I have a similar problem ...
when I give the user SAP_ALL security profile,
the problem is gone,
but I DON'T want to do that...
can you please specify how to give full authentication access to WAD only
thanks a million!
Edwin

Error in Web application designer in BI7.0

Hi,
If we try to create the template and save, it is showing the following error.
JAVA COMMUNICATION ERROR RFC_DESTINATION IS NOT CONFIGURED.
we tried some RFC connections in the backend . It is showing BI metadata for BSM is outdated. I checked the necessary settings according to note :888687.
But we are able to check the RFC connection between ABAP and portal.
But we are getting the same error. While saving the template which created. it showing the error and i am not able to save the template
Please help in this issue..
thanks in advance.
Regards,
Mohankumar.G

I was working on similar issue for 2 days & I am able to overcome the error mention by you related to WAD now I am able to execute the WAD application through portal.
Send me your mail Id I will fwd u the configuration steps
Meanwhile chk Trans: SM59 for RFC connection
IN Visual Admin check the JCo RFC Provider is properly configured with backend username.
Chk all the JCo related to BI are working properly either with SSO or User mapping
Chk in Table RSPOR_T_PORTAL the portal URL is proper or not
(transaction code SM30).
2. Enter RSPOR_T_PORTAL as the table.
3. Choose Maintain.
4. Choose New Entries to create a new entry.
5. Maintain the connected portal:
RFC destination: <RFC_DESTINATION>
System name: <SYSTEMALIAS>
Default: <DEFAULT>
Portal URL prefix: <PORTAL_URL_PREFIX>, for example, http://<portalserver><domain>:<port>
Prefix of RM for BW Metadata: <KM_RM_METADATA_PREFIX>, for example, /bw_metadata
KM service URL: <blank>
Referesh the MetaData Service in BI Web Application Designer under settings try to connect you SAPRFC.ini file set enviroment variables for the same.
Swapnil

WEB APPLICATION DESIGNER - ERROR

Hello
We're getting an error when we try to save an item in BEx Web Application Designer:
RSBOLAP 018 Java system error: An Unknown Error Occured During Portal Communication
RSBOLAP 018 Java system error: Excepction in method processFunction
Has anyone experienced and solved this issue?
Thanks in advance, kind regards!
Jon

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

Bex Web Application Designer issue: portal communication error

hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudi

hi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi

Web Application Designer (SAP BW 3.x) is not openning

Hi all,
When I am opening Web Application Designer once the screen is opened it is disappearing. My GUI is on win2003 thinclient technology. is any additional patches required?
please hele me...
Kariyath

Hi Kariyath,
can you provide us the exact Release and Patchlever of the GUI you use?
Regards
Gregor

BEX Web application Designer displaying Java Communication Error

Hi,
When we are using the BEX Web application Designer to create new web template, it throws error saying "Java Communication Error: An UnKnown Error Occured During Portal Communication."
====================================================
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
====================================================
Kindly help to resolve this issue.
Regards, Krish

Hi,
Please check below document for connection between BI and Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d082fe32-5037-2b10-3288-fd009f695c74
You might be doing something wrong in any of these steps.
Regards,
Kams

Error in Web Application Designer

I hope that somebody can help me, we migrated the system BW of version 3.1 to 3.5, but when trying to enter the Web Application Designer throws the following error:
you are logged on to application server that does not support HTTP
thank's

Hi,
Goto transaction SMICM and see if the ICM is active: Do you see a Red or Green light here? If Red, then use menu Administration > ICM > Restart > Yes
Check the services (Shift+F1) and see if HTTP is active.
Hope this helps...

Web Application Designer Opening Error

Similar Messages

Maybe you are looking for