Web Application Designer/PDF

Hi,
I have created web Template with Container_layout which contain different web items (Buttom_Group, tabel,..etc)
outside the Container_layout I have created table which contain a Logo and a Titel.
when I try to show the result in PDF-Format through the Buttom I created, it shows me no Logo and Titel but only what inside the Container_layout.
can any one tell where is the problem?
thanks for any Help

Hi Martin,
There are selected web items that can only be downloaded into PDF.
Not everything.
So your label if you simply has put down text cannot be downloaded if you create label using web-item then it can be.
Regarding image you have to store the image in MIME repository first after that it can be downloaded into pdf.
Thanks
Dipika

Similar Messages

Print PDF file with the lay out created in the BEx web application designer

Got the following questions (problems) when print a web report created in BEx Web Application Designer to a PDF file:
1. The tile (which has a company logo and report name in it) was not printed, is it possible to print a title (with company logo) on each page of the PDF file?
2. Want print the filters that have value specified on the PDF file, is it possible to do this?
Any help is appreciated, thanks.

Hi Simon,
you can achieve this requirement i.e. using this way of implementation:
1. Create a new template which contains the required fields (company logo etc) and set the visibility of the top container to "hidden". Add a empty data provider to this template and add the filter values (variable names) you want to display on the PDF. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
2. Open your original template and include the template you created in step 1 (Advanced: Web Templates). Choose the appropriate location (above/below the analysis item.
3. Check the settings of your export command: do not set a special web item to be printed.
If you export the template within web the second template should be printed correctly.
Brgds,
Marcel

Web Application Designer broadcast select Web Items

Hello all,
I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding" Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
Thank you in advance!

Found it:
- New Button
- Action = Command
- Commands for DataProviders/ Hierarchies / SET_HIERARCHY

Print functin in Web Application designer.

Hi gurus,
We have a requirement to print reports in web application designer. I need to add one print button.
Can any one tell me the procedure for printing the results area.
I am in BW 3.5 version.
Thanks in advance.
Edited by: Venkataramana on May 22, 2008 6:10 PM

Hi Venkataramana,
Go through below process...
In the WAD, drag Context Menu web item and set the properties for 'Print Version' ON.
Test if the Adobe Document Service (ADS) is running on the BI system. To do this, go to SE38 and execute program FP_PDF_TEST_00 to test the connection or, use FP_TEST_00 in 'Print Preview', you will be able to see the PDF print preview which means the service is on.
When the report is executed, you can access the print service through the context menu to convert the report into PDF format and save/print from there.
hope this helps...
for further ref go through this thread:[/message/4946492#4946492 [original link is broken]]
regards,
NR

Web Application Designer need help ASAP

Hi All,
I have a requirement to customize the analysis item in a web application designer.
I have created new templetes and added a analysis with a query view as data provider .
in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
Thanking You,
Rukmini

Dear Devi,
If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
The Modification parameter provides modules whose use can be controlled using additional parameters.
This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
Prerequisites
The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
Procedure
You use the modules as follows:
       1.      Select a module from the sample modules.
       2.      Specify the module in the Modification parameter of the Analysis Web item.
       3.      Control the display and behavior of the module by specifying the module-specific parameters.
Result
The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
Example
For example, you can define a fixed column width or display comments in cells.
For more info :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat..

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

How to create a date range in Web Application Designer

I am using 3.1 version of Web App Designer. I need to create a report with date ranges. I can get one date to work but not two (I need a start date and end Date). My Query has 0CALMONTH with a variable for Interval. When I select it as a dropdown (??) in Web App Designer, I only get one date prompt in web app designer.
Any suggestions??
Thanks
Kristen

Hi Kristen,
I'm sorry i'm not coming to solve your problem,but for the trouble I have had,and I want to create a date picker in Web Application Designer,so if you have solved the problem ,please email to me? [email protected] ,thx very much!
best regards
zegion chan

URL link in rows/colomns of a report web application designer.

Hi,
I would like to create a URL link in a report which jumps to documents on livelink.
For example:
1. bw    30.000    www. google.nl
2. sap   40.000    www. sap.com
3. basis 50.000   www. nu.nl
etc.
etc.
Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
Thanks for your help en replies.
Rishma.
Edited by: R. Debi on Oct 7, 2010 11:20 AM

I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document. SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
Thanks a lot,
Rishma

To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Web Application Designer: Column width on analysis_item with BW 7.0

Hi,
I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:
<b>
1. Is it possible to hard-code/specify column widths of the analysis_item?
2. The property width of the analysis_item doesn't work, does it?
</b>
Thanks for your time and efforts.
Message was edited by:
Daniel Rubio

Hi,
I have just discovered the capability of modifying columns widths with css properties.
So if I add to the head section of the html:
div.prueba2 .urSTTDBdr1
div.prueba2 .urSTTDBdr
div.prueba2 .urSTTDBdr2
And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
Thanks

Unable to open WAD (web application designer) in BW 3.5!

Hi,
when i open WAD through menu path (start->programs
->Business explorer->Web application designer), i am getting the following error!
WADConst
Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
can any one expalin me what is this problem? and suggest me to over come this problem?
Thanks,
Ravi

Hi Ravi!
I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
You have to use this version of the BEx Web Application Designer.
If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
Thank you,
Tobias

Hiding table columns in web application designer

Hi,
Can anyone please tell me how to hide the columns of a table which im using in a web application template as analysis. E.g : if i have 7 columns in my table and i dont want to show that particular column i.e 7th and m using the same query somewhere else also to show other information so i cannot change my query but i want to hide it at web application designer level.
Any help will be appreciated.
Thanks & Regards

Hi Preetha,
I think best solution to your problem(keeping future enhancements in mind) is to create a query view based on the query that you are using.
Move the unwanted characteristics to free chars section or hide the unwanted key figures.
Then resave this query view.
You can use this query view as a data provider to this table.
Hope this helps.
Thanks and Regards,
Anup Kulkarni

Error in Web application designer in BI7.0

Hi,
If we try to create the template and save, it is showing the following error.
JAVA COMMUNICATION ERROR RFC_DESTINATION IS NOT CONFIGURED.
we tried some RFC connections in the backend . It is showing BI metadata for BSM is outdated. I checked the necessary settings according to note :888687.
But we are able to check the RFC connection between ABAP and portal.
But we are getting the same error. While saving the template which created. it showing the error and i am not able to save the template
Please help in this issue..
thanks in advance.
Regards,
Mohankumar.G

I was working on similar issue for 2 days & I am able to overcome the error mention by you related to WAD now I am able to execute the WAD application through portal.
Send me your mail Id I will fwd u the configuration steps
Meanwhile chk Trans: SM59 for RFC connection
IN Visual Admin check the JCo RFC Provider is properly configured with backend username.
Chk all the JCo related to BI are working properly either with SSO or User mapping
Chk in Table RSPOR_T_PORTAL the portal URL is proper or not
(transaction code SM30).
2. Enter RSPOR_T_PORTAL as the table.
3. Choose Maintain.
4. Choose New Entries to create a new entry.
5. Maintain the connected portal:
RFC destination: <RFC_DESTINATION>
System name: <SYSTEMALIAS>
Default: <DEFAULT>
Portal URL prefix: <PORTAL_URL_PREFIX>, for example, http://<portalserver><domain>:<port>
Prefix of RM for BW Metadata: <KM_RM_METADATA_PREFIX>, for example, /bw_metadata
KM service URL: <blank>
Referesh the MetaData Service in BI Web Application Designer under settings try to connect you SAPRFC.ini file set enviroment variables for the same.
Swapnil

Calling a webservice from within Bex Web Application Designer

Hi
I have a web-template built with BEx web application designer which also contains textboxes. This text should be stored by calling a webservice (standard BI-documents are not an option).
Can anyone tell me how I could call a webservice from within the BEx web template to store the text contained in the textbox? The webservice-call should include some of the filter-varialbes of the web application.
Is this only possible by the use of a JavaScript WebItem? If so - does anyone have an example of such a JavaScript.
Thanks a lot in advance.
Kind regards.
Christoph

Thanks for your response. The BSP page would work out fine if I only needed to save the data.
But the next time I call the webtemplate, the textarea should be filled by another webservice call with the stored text (so the text can be modified und saved again). This will not be possible by calling a BSP page.
Do yoiu have any suggestions how to integrate the text (return value from the webservice call) into the textbox in the webtemplate?
Kind regards.
Christoph

Dynamic Wrapping of text in Web Application Designer of BEx.

Hi
Dynamic wrapping of text is to be done in Web application Designer of BEx.
How is the code that was given earlier to be incorporated using stylesheets???Please explain in detail.
Also if any other way is possible,plz deliberate.
Thanks.

Hi Sachin,
stylesheet parameter is:
white-space:
options:
normal
pre
nowrap
pre-wrap
pre-line
regards Sven

Web Application Designer/PDF

Similar Messages

Maybe you are looking for