Web application designer - save view, Export to excel problem

Hi All,
It is very urgent.
We are working in BW 3.5 version.
In web application designer save view, export to excel, export to CSV options are not working.In the report out put if i select any of these push buttons it is giving blank page.
Please give me the solution for the above.
Thanks & Regards,
Vizz

Hi Amer,
There is a web item 'Menu bar' available in WAD 7.0.
There, you can set the Action (Command Triggered) (ACTION) property to Export Web Application and achieve the functionality of exporting to excel.
For more details, see this..
http://help.sap.com/saphelp_nw04s/helpdata/en/b9/a18342fe118c51e10000000a1550b0/frameset.htm
Hope this helps you..!!
Revert back in case of any help needed..
-Pradnya

Similar Messages

  • Creating Views in Web Application Designer

    Is there a way in which we can create different navigational views for a query in Web Application Designer. Can anyone give me a step by step process for the same.
    Thanks,
    Neha.

    Wond,
    I have created a query in the Bex query designer and when i am trying to do a SAVE AS its only allowing me to save it in either favorites or roles. I want to save it as one view and build a few views with different key figures and have all the views in a drill down fashion so that when the end-users run the query, by running a specific view they will get all the relevant data. How can I achieve this is query designer. Could you explain elaborately.
    Thanks Again,
    Neha.

  • Insert a  BSP Application in  Web Application designer template (WAD)

    Hello to all
    I like to place a BSP Application in my Web Application designer template (WAD). Have someone a good idea how to display a BSP in a web item.
    We use BW 7.0 .
    Thanks a lot for any good idea.
    Christian
    Edited by: Christian Baumann on Nov 10, 2010 3:46 PM

    Christian,
    There are many ways you can do this ...
    1. In Portal - you can have two iviews for the same and run both of them together ( there was something called client side eventing or something like that before - I am not sure if it still exists
    2. In WAD - use frames - use one frame for the WAD template and the other for the BSP ( I have never tried it in WAD 7.0 but it works in 3.x where you can introduce frames
    3. Possibly have the BSP as a link in the template so that it opens up separately ..?
    4. Instead of embedding the BSP into your WAD - embed your WAD into the BSP ..? this is also possible since the output of the template is HTML - but then you will have a hard time getting the context menu , export to excel etc which are all taken for granted in WAD.

  • Bex Web Application Designer issue: portal communication error

    hi experts,
    I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
    The Requested operation could not be performed due to portal communication error.
    its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
    when i double click the below error details given.
    Diagnosis
    An error occurred in the BI components on the SAP J2EE Engine.
    System Response
    Procedure
    Contact your system administrator to have the error analyzed in detail.
    Procedure for System Administration
    Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
    The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
    If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
    please give solutions to resolve the issue.
    regards
    vadlamudi

    hi shambhu,
    thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
    regards
    vadlamudi

  • Query on WAD (Web Application Designer)

    We have got request from the user on one WAD u2013 Web Application Designer Report for the extra functionality.
    This WAD report contains 7 tabs, for each tab there is a separate query view has bee designed with default variable values.
    While running the WAD report user will input values in the variable window for the variables (Eg: Fiscal Year, Org.Structureu2026etc), after executing the report, if the user switch to another tab in the same report, the variable values entered before execution of the report will not pass to the another tab by default because the query views have been designed in such a way that each query view will have its own default values.
    Now the user is expecting the variable values entered for the first tab should be passed to other tabs as well, is it possible to pass values from one tab to another tab?
    If its possible, could you guide us where (HTML code or web template parameters or any another things) exactly the required changes/modifications need to be made in WAD report?
    Thanks in advance.

    hi vishal ,
    You are right .At first i did not get you solution
    but later i treid some random seletion propeties for the text web item.
    I got it.
    Steps:
    1. Place the text element in the right panel of wad.
    2. Go to properties of test element.we have two in this 1.General 2.specific.
    3. In specific we have the Display General Text Elements.Checkthis Check box
    4.save.
    Now you can see the ouptput.
    But not only last loaded date but also other details like
    Last change by,created by,..refreshed date..etc

  • Web Application Designer - Bug

    Hi All,
    I keep losing all my BW URL's in Web Application Designer and it is becoming very frustrating.
    For some reason when I save a template after making changes it sometimes replaces all the BW URL's which I have coded with:-
    <A href="[SAP_BW_URL_!IID_688]">
    And I have to go through and put them all back in again.
    Is there something I can do to stop this happening?
    Thanks in advance.

    Sean,
    Actually It happened with me too once, I lost all my icons like download to excel, exception, conditions etc and then had to put that back again.
    But after that I have made chnages and it didnt happen, It think it happens if you are in HTML tab at the bottom and are trying to chnage the html code, like your gif file path or something, then when you reactivate it messes some of the custom code in it. So please try to be out of HTML mode while reactivating......
    I have another issue though, I have a gif file in the html code that i uploaded from MIME repository. This file has the path of dev system example sapb83.com....
    sapb83 points to out dev system, now when i transport this to our Production system, while excution of query from BEX Browser, it prompts for dev passoword becasue of the gif file path being from dev..... how can this be made dynamic ??
    thanks
    surendra Jain
    PS: SEAN, if you have upgraded to 3.5, please tell me your expereince with upgrade, we are also on 3.1 and will upgrade soon to 3.5, are there some hurdles which if i know before hand will help?? if you would like to share, my email is [email protected]

  • Problem with BEx Web Application Designer

    Hi,
    we use since last week the Web Application Designer with the SAP GUI 7.2.
    Now I have a big problem since last week. I can call existing templates but unfortunately not change! I make a change in the template and save it. When I viewed the template again but no change is saved!
    A new template I can create and change
    Does anyone know the problem? The behavior also occurs with the old Gui 7.1.
    Regards
    Edited by: Jana VOGL on Oct 18, 2010 10:14 AM

    Hi Jana,
    Do you get any error before opening of an existing template in WAD? Doesn't look to be a problem with the different SAP GUI versions. Maybe somethings gone wrong with the Java - ABAP config settings or Java Portal communication settings. Maybe you should check with your BASIS team on the same. Tell them what the problem is & they will run a trace to figure out.
    --Priya

  • Web Application Designer need help ASAP

    Hi All,
    I have a requirement to customize the analysis item in a web application designer.
    I have created new templetes and added a analysis with a query view as data provider .
    in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
    How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
    Thanking You,
    Rukmini

    Dear Devi,
    If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
    The Modification parameter provides modules whose use can be controlled using additional parameters.
    This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
    Prerequisites
    The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
    SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
    Procedure
    You use the modules as follows:
           1.      Select a module from the sample modules.
           2.      Specify the module in the Modification parameter of the Analysis Web item.
           3.      Control the display and behavior of the module by specifying the module-specific parameters.
    Result
    The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
    Example
    For example, you can define a fixed column width or display comments in cells.
    For more info :
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    Hope this helps u..
    Best Regards,
    VVenkat..

  • Problem with layout in Web Application Designer

    Hi all,
       I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and  choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
    Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows  the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
    Thanks in advance,
    Mª del Mar Bonilla.

    Bonilla,
    Welcome to SDN...
    Try this out...
    In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
    Just update the result of what I have mentioned above...
    Hope it helps..
    Arun
    P.S Assigning points is a way fo saying thank you in SDN

  • Hiding table columns in web application designer

    Hi,
    Can anyone please tell me how to hide the columns of a table which im using in a web application template as analysis. E.g : if i have 7 columns in my table and i dont want to show that particular column  i.e 7th and m using the same query somewhere else also to show other information so i cannot change my query but i want to hide it at web application designer level.
    Any help will be appreciated.
    Thanks & Regards

    Hi Preetha,
    I think best solution to your problem(keeping future enhancements in mind) is to create a query view based on the query that you are using.
    Move the unwanted characteristics to free chars section or hide the unwanted key figures.
    Then resave this query view.
    You can use this query view as a data provider to this table.
    Hope this helps.
    Thanks and Regards,
    Anup Kulkarni

  • Error in Web application designer in BI7.0

    Hi,
    If we try to create the template and save, it is showing the following error.
    JAVA COMMUNICATION ERROR RFC_DESTINATION IS NOT CONFIGURED.
    we tried some RFC connections in the backend . It is showing BI metadata for BSM is outdated. I checked the necessary settings according to note :888687.
    But we are able to check the RFC connection between ABAP and portal.
    But we are getting the same error. While saving the template which created. it showing the error and i am not able to save the template
    Please help in this issue..
    thanks in advance.
    Regards,
    Mohankumar.G

    I was working on similar issue for 2 days & I am able to overcome the error mention by you related to WAD now I am able to execute the WAD application through portal.
    Send me your mail Id I will fwd u the configuration steps
    Meanwhile chk Trans: SM59 for RFC connection
    IN Visual Admin check the JCo RFC Provider is properly configured with backend username.
    Chk all the JCo related to BI are working properly either with SSO or User mapping
    Chk in Table RSPOR_T_PORTAL the portal URL is proper or not
    (transaction code SM30).
    2. Enter RSPOR_T_PORTAL as the table.
    3. Choose Maintain.
    4. Choose New Entries to create a new entry.
    5. Maintain the connected portal:
    RFC destination: <RFC_DESTINATION>
    System name: <SYSTEMALIAS>
    Default: <DEFAULT>
    Portal URL prefix: <PORTAL_URL_PREFIX>, for example, http://<portalserver><domain>:<port>
    Prefix of RM for BW Metadata: <KM_RM_METADATA_PREFIX>, for example, /bw_metadata
    KM service URL: <blank>
    Referesh the MetaData Service in BI Web Application Designer under settings try to connect you SAPRFC.ini file set enviroment variables for the same.
    Swapnil

  • Calling a webservice from within Bex Web Application Designer

    Hi
    I have a web-template built with BEx web application designer which also contains textboxes. This text should be stored by calling a webservice (standard BI-documents are not an option).
    Can anyone tell me how I could call a webservice from within the BEx web template to store the text contained in the textbox? The webservice-call should include some of the filter-varialbes of the web application.
    Is this only possible by the use of a JavaScript WebItem? If so - does anyone have an example of such a JavaScript.
    Thanks a lot in advance.
    Kind regards.
    Christoph

    Thanks for your response. The BSP page would work out fine if I only needed to save the data.
    But the next time I call the webtemplate, the textarea should be filled by another webservice call with the stored text (so the text can be modified und saved again). This will not be possible by calling a BSP page.
    Do yoiu have any suggestions how to integrate the text (return value from the webservice call) into the textbox in the webtemplate?
    Kind regards.
    Christoph

  • Security for creating web templates using web application designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
    The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
    Thanks,
    Jeff Ehritt
    ERP COE SAP BW Security

  • Security For BW Web Application Designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in adition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Hi Jeff,
    there are no special authorization objects for Web Templates. RS_COMP will still only work for queries, structures.... Saving to roles requires certain authorizations for the role (s_agr_*), here you can define the roles you can save templates to.
    Regards, Klaus

  • WEB APPLICATION DESIGNER - ERROR

    Hello
    We're getting an error when we try to save an item in BEx Web Application Designer:
    RSBOLAP 018 Java system error: An Unknown Error Occured During Portal Communication
    RSBOLAP 018 Java system error: Excepction in method processFunction
    Has anyone experienced and solved this issue?
    Thanks in advance, kind regards!
    Jon

    Hello,
    Have a look at these Notes
    SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
    SAP Note 916090 RFC-error messages in Web Application Designer 2004s
    Thanks
    Chandran

Maybe you are looking for