Web Application Designer uses wrong server name

Hello,
I am using BI under NW04s.
When I execute a web template in Web Application Designer it opens up the url with the server name without it's FQDN name and than I get: "URL used, <URL>, is invalid; distributed session management (DSM) cannot function. See SAP Notes 596698 and 654326.
I've looked at these notes but I don't see how it can solve my problem.
I've already followed the suggestions in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=279031">this</a> thread including checking RZ10 and RSPOR_T_PORTAL table.
Any other ideas...?
Roy

Hi,
try maintaining parameter <b>icm/host_name_full</b> in SMCIM (goto/parameters/change).
hope this helps...
Olivier.

Similar Messages

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

What GUI to use web application designer in BI 7.0 without support package

I use BI in my ECC 6.0 system.
I use tried both GUI 7.1 and GUI 6.40 to logon web application designer.
But system display the message please logon to a Netweaver BI 7.x system. System A11 does not have a mimumium version required 7007.
My system seems to be 7000, so what GUI is suitable to use for WAD?
Thanks
Giang

Hi,
It could be problem with either Support package which you are using for BI or Front end patch which you need to install for GUI.
please check with minimal installations and let me know with current support package and FEP you are using.
Regards
Suresh

Use Map In Web Application Designer

Hi gurus:
when I create map in Web application designer ,it shows the error:
Messages:
Internal error communicating with the IGS (maps)
Map could not be Created
But the map can be shown in Analyser,please help me!
thanks

Hi,
please tell more about your scenario.
Are you using dynamic attributes?
Are all layers visible?
Did you check the query that you are using as Dataprovider?
Is there only one geocharacteristic in the row?
Which infoobjects are you using and which shapefiles?
Best regards
Andreas

Prevent values being passed using Link Item on Web Application Designer

Hello all,
I have a question regarding 7.0 Web Application Designer. I am using the web item Link Item and using the command OPEN_TEMPLATE_DIALOG to open a new WAD Template BUT I do not want to pass the values from the original WAD template to the new one. Is there a way to restrict passing any values to the new template? Am I using the correct command OPEN_TEMPLATE_DIALOG?
To better describe what is happening, my characteristics and key figures are being passed from my original WAD template to my new WAD template when using the OPEN_TEMPLATE_DIALOG. I do not the values to be passed, only to open up the new WAD Template with its own reports.
Thank you.

Sorry maybe I mistated the problem. I do not have an issue with the variable screen when transitioning to the second WAD template screen, I have a problem due to the values from the first WAD template being passed to the second WAD template.
My first WAD template using the Link Item is only for the ability to click on the text to open up a second WAD template which I do not want the values to be passed from the First template.
I hope this clears up the confusion.
Thanks

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Bex Web Application Designer issue: portal communication error

hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudi

hi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi

Security For BW Web Application Designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in adition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Hi Jeff,
there are no special authorization objects for Web Templates. RS_COMP will still only work for queries, structures.... Saving to roles requires certain authorizations for the role (s_agr_*), here you can define the roles you can save templates to.
Regards, Klaus

Print PDF file with the lay out created in the BEx web application designer

Got the following questions (problems) when print a web report created in BEx Web Application Designer to a PDF file:
1. The tile (which has a company logo and report name in it) was not printed, is it possible to print a title (with company logo) on each page of the PDF file?
2. Want print the filters that have value specified on the PDF file, is it possible to do this?
Any help is appreciated, thanks.

Hi Simon,
you can achieve this requirement i.e. using this way of implementation:
1. Create a new template which contains the required fields (company logo etc) and set the visibility of the top container to "hidden". Add a empty data provider to this template and add the filter values (variable names) you want to display on the PDF. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
2. Open your original template and include the template you created in step 1 (Advanced: Web Templates). Choose the appropriate location (above/below the analysis item.
3. Check the settings of your export command: do not set a special web item to be printed.
If you export the template within web the second template should be printed correctly.
Brgds,
Marcel

Web Application Designer -Unknown Error Occured during Portal Communication

we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

Web application Designer - RFC Exception

Hy guru, i have a serious problem: when open or execute a web templat on web application designer 7.0 i receive a error type RFC Exception.
Could you hlep me? Thank's a lot.
This is the content of bex_trace file:
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.GetHistory(BExObjectType pObjType, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
     at com.sap.bi.et.wad.man.WADTemplateController.GetHistoryForDisplay()
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.renderHistory()
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.Refresh()
     at com.sap.bi.et.wad.man.WADfrmMainWindow.RefreshInitialTemplateList()
     at com.sap.bi.et.wad.man.WADTemplateController.OnTemplateOpened(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.TemplateOpenedEventHandler.Invoke(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.AddTemplateOrLibrary(WebTemplate)
     at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.RegisterTemplateOrLibrary(IWebTemplate)
     at com.sap.bi.et.wad.man.WADTemplateController.LoadTemplate(EnumLoadMode, String, String, Boolean, String, Boolean, Boolean)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.Menu_OpenSelectOH(BExOpenHistoryEventArgs)
     at com.sap.bi.et.common.BExOH.BExOpenHistory.RaiseSelectOpenEntry(dtaBExOHRow)
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.StartTemplate(dtaBExOHRow)
     at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.lblLinkName_LinkClicked(Object, EventArgs)
     at System.Windows.Forms.Control.OnClick(EventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at System.Windows.Forms.Label.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
END com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList ##########
--> com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
-EXCEPTION-START- : DEBUG ### JSP-Conversion: ---
Exception Message: RFC_ERROR_SYSTEM_FAILURE
Exception    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.Rfc.RfcClient.RfcInvoke(SAPClient proxy, String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at com.sap.bi.et.Communication.RSWAD.BExGeneratedRSWAD.RSWAD_WEBPUB_CALL_SERVICE(String I_ACTION, String I_CONTEXTDESCRIPTION, String I_CONTEXTFRAGMENT, String I_NODEFRAGMENT, String I_TEMPLATE, String I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
   at com.sap.bi.et.Communication.RSWADrfc.RSWAD_WEBPUB_CALL_SERVICE(String& I_ACTION, String& I_CONTEXTDESCRIPTION, String& I_CONTEXTFRAGMENT, String& I_NODEFRAGMENT, String& I_TEMPLATE, String& I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
   at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate iTemplate)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Debug.Exception(String, Exception)
     at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate)
     at com.sap.bi.et.wad.man.WADTemplateManipulator.ValidateTemplate(WebTemplate)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmValidateOnTheServer_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.NotifyItem(BarItem)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.HidePopup(PopupCloseType)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.ProcessItemClick(BarItem)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message&)
     at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message&)
     at Syncfusion.Windows.Forms.Grid.GridControlBase.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
: DEBUG ### False - RSWAD_WEBPUB_CALL_SERVICE:V:Validate on Server returned e_subrc=99
END com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
--> com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject ##########
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
-EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
Exception Message: Check: RFC Exception
Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
   at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
   at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
   at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
     at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
     at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
     at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
     at System.Windows.Forms.Control.WndProc(Message&)
     at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----

Andrea,
Try using ST22 to see if it gives you a detailed error message. If it is listed it will tell you what it is missing.
Cheers,
Rusty

Web Application Designer standstill since BW SP25 / BI Java SPS 23

Hi experts,
in February we implemented the latest SPs into a SAP development system of our customer.
Since then the BEx Web Application Designer doesn't work anymore for them.
It just hangs up and you cannot even close it.
I will provide the tracefile in an answer to this post because otherwise the post won't be readable.
I've found note 1437358 concerning NullPointerException (but not NullReferenceException) but I doubt that this has something to do with our issue.
Does anybody have an idea what could cause this problem and how it could be solved?
WAD 7.20 is used.
Best wishes
Marie

10:57:23.559: Info: Web Application Designer Start. Revision: 7100.4.1200.491
BExCheckFrontend.CheckFrontend: No Check performed (20110322) 0
10:57:32.933: Connected. System: HWT
-EXCEPTION-START- 10:57:35.198: DEBUG EXCEPTION ### ---
Exception Name: ArgumentException
Exception Message: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch:tartitle. Hinzuzufügender Schlüssel: tartitle.
Exception    bei System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
   bei System.Collections.Hashtable.Add(Object key, Object value)
   bei System.Collections.Specialized.StringDictionary.Add(String key, String value)
   bei com.sap.bi.et.wad.wadconst.WADShortNames.InitShortNames(XmlDocument iTagList, XmlNamespaceManager insmgr)
   bei com.sap.bi.et.wad.man.WADfrmMainWindow.PubMainWindow_Load(Object eventSender, EventArgs eventArgs)
   bei System.EventHandler.Invoke(Object sender, EventArgs e)
   bei System.Windows.Forms.Form.OnLoad(EventArgs e)
   bei System.Windows.Forms.Form.OnCreateControl()
   bei System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   bei System.Windows.Forms.Control.CreateControl()
   bei System.Windows.Forms.Control.WmShowWindow(Message& m)
   bei System.Windows.Forms.Control.WndProc(Message& m)
   bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
   bei System.Windows.Forms.Form.WmShowWindow(Message& m)
   bei System.Windows.Forms.Form.WndProc(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Full Stack:   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
   bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   bei System.Windows.Forms.Control.WndProcException(Exception e)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.MainWindowSubclass.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
   bei System.Windows.Forms.Control.SetVisibleCore(Boolean value)
   bei System.Windows.Forms.Form.SetVisibleCore(Boolean value)
   bei System.Windows.Forms.Control.Show()
   bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
-CALLING-FROM- 10:57:35.198: DEBUG EXCEPTION ### ---
   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
   bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   bei System.Windows.Forms.Control.WndProcException(Exception e)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.MainWindowSubclass.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
   bei System.Windows.Forms.Control.SetVisibleCore(Boolean value)
   bei System.Windows.Forms.Form.SetVisibleCore(Boolean value)
   bei System.Windows.Forms.Control.Show()
   bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-START- 10:57:47.399: DEBUG EXCEPTION ### ---
Exception Name: NullReferenceException
Exception Message: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
Exception    bei com.sap.bi.et.wad.man.WADfrmMainWindow.RefreshInitialTemplateList()
   bei com.sap.bi.et.wad.man.WADTemplateController.OnTemplateOpened(WebTemplate iTemp)
   bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.TemplateOpenedEventHandler.Invoke(WebTemplate iTemplate)
   bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.AddTemplateOrLibrary(WebTemplate iTemplate)
   bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.RegisterTemplateOrLibrary(IWebTemplate iWebTemplate)
   bei com.sap.bi.et.wad.man.WADTemplateController.LoadTemplate(EnumLoadMode iLoadMode, String iFileName, String iTechName, Boolean iAsLibrary, String iEnqueueMode, Boolean iAsCopy, Boolean iForceRawEdit)
   bei com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String iTechname)
   bei com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object eventSender, EventArgs eventArgs)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
   bei Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
   bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   bei System.Windows.Forms.Control.WndProc(Message& m)
   bei Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Full Stack:   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
   bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   bei System.Windows.Forms.Control.WndProcException(Exception e)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
   bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   bei System.Windows.Forms.Application.Run(Form mainForm)
   bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
-CALLING-FROM- 10:57:47.399: DEBUG EXCEPTION ### ---
   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
   bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   bei System.Windows.Forms.Control.WndProcException(Exception e)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
   bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   bei System.Windows.Forms.Application.Run(Form mainForm)
   bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()

Web Application Designer

Hello,
I use the Web Application Designer:
Release 2004s, Support Package 12, Patch 1, Revision 314
I made a new Web Template. If I save it, I will get the following 2 errors:
1)
Messageclass: RSBOLAP
Newsnumber: 018
Description: "Java Systemerror: An unknown error in the portal communication accured.
2)
Messageclass: RSBOLAP
Newsnumber: 018
Description: "Java Systemerror: Bean RSWR_TEMPLATE_PROCESS_PROXY not found on host96eep01, ProgId=s96eep01_PORTAL_ Object not found in ookup of RSWR_TEMPLAT"
Does someone know this problem?
Greetings Ronny

Please send us the solution for this issue.we also get the same error while using the Web Application Designer .
Found the below error in the default trace
Error 1
Exception thrown [Fri Aug 15 11:29:15,070]:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
    message: 'ashost' is missing
    Return code: RFC_INVALID_PARAMETER(19)
    error group: 101
    key: RFC_ERROR_PROGRAM

Web Application Designer uses wrong server name

Similar Messages

Maybe you are looking for