Web application designer web item missing

Hi,
I have a problem with the WAD designer, when I'm designing a new web template and I drag and drop any web item to my template layout, the item appears without image and with a message "Table: Image missing". I try to solve the problem deleting the wad cache, and eve reinstalling the SAP GUI, but it still happening.
Can anyone help me please!!
Thanks!
Rodrigo!

Hi Rodrigo,
Welcome to SDN.
Please check your IGS setting, check this posts for more information:
BW and IGS
IGS Error
hope it helps,
regards,
Parth.

Similar Messages

Web Application Designer - Analysis Item

Hi Experts,
We are using Analysis Iten property (Column From And Colum To) to display one few key figures from Query. This is because we are using same query for differnt Analysis items with differnt key figures.Now issue is we are having few key figure nodes collapsed in Quey designer. Analysis item is not considering the sub key figures of collapsed note. So whenever we expand a node a run time,the key figures at the end are not getting displayed. Please provide any solution for this issue.
Thanks in Advance,
Reshma M

It is because the column numbering changes when you expand a collapsed keyfigure.
Create a query view with the keyfigure(s) that you need for the analysis web item. Then use this query view for the analysis web item and remove the settings on Column From/To properties.
Regards
Francis

Web Application Designer - Chart Item - BW Release 3.5

Hello,
I have a problem with the new chart item in BW 3.5.
I cannot show the data table within the chart item.
In BW 3.0B there was an easy possibilty to switch "show data table" on/off.
Please help!
Thanks in advance

Hi Tim,
You can still do this, but you will need to add it to the HTML code.
See the last attribute in this for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/489d39d342de00e10000000a11402f/content.htm
Hope this helps...

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

Web Application Designer broadcast select Web Items

Hello all,
I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding" Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
Thank you in advance!

Found it:
- New Button
- Action = Command
- Commands for DataProviders/ Hierarchies / SET_HIERARCHY

WEB application designer - Web items - How to create new

Hi!
Is there a way to create new web item in web application designer, and <b>NOT</b> a copy of existing with different parameters (Web items located under Standard tab).
It would expand possibilities of web app. designer a lot!
Another question is, how to use BSP elements in BEX WEB reports (templates). Is this possible or not?
Thank you in advance!
Egi

Hi,
in principal you can write new web items but this is not supported by SAP as this is a modification.
You would inherit from a standard web item class (for example CL_RSR_WWW_ITEM_VIEW) and maintain tables rsrrenderer rsrrendereratr rsrrenderert and optionally rsrrendererdep
BSP itself can not be used, unless you include a BSP Application via Iframes in your Web template.
Heike

Prevent values being passed using Link Item on Web Application Designer

Hello all,
I have a question regarding 7.0 Web Application Designer. I am using the web item Link Item and using the command OPEN_TEMPLATE_DIALOG to open a new WAD Template BUT I do not want to pass the values from the original WAD template to the new one. Is there a way to restrict passing any values to the new template? Am I using the correct command OPEN_TEMPLATE_DIALOG?
To better describe what is happening, my characteristics and key figures are being passed from my original WAD template to my new WAD template when using the OPEN_TEMPLATE_DIALOG. I do not the values to be passed, only to open up the new WAD Template with its own reports.
Thank you.

Sorry maybe I mistated the problem. I do not have an issue with the variable screen when transitioning to the second WAD template screen, I have a problem due to the values from the first WAD template being passed to the second WAD template.
My first WAD template using the Link Item is only for the ability to click on the text to open up a second WAD template which I do not want the values to be passed from the First template.
I hope this clears up the confusion.
Thanks

BEx Web Application Designer (WAD) not loading all web items

Hello,
I have a rather complex web template with about 20 charts, and 40 drop down boxes and it works great.
The issue I have is when I am in development I usually have to open & close the template about 10-15 times untill all of my web items appear in the properties list. For example, a chart item will appear on my template, but it is not editable because it was not "fully loaded" because it is not in the list of possible web items in the Properties drop down box. Has anyone else experienced this / found a solution??
Thanks!
-Gary

bump

Web Application Designer need help ASAP

Hi All,
I have a requirement to customize the analysis item in a web application designer.
I have created new templetes and added a analysis with a query view as data provider .
in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
Thanking You,
Rukmini

Dear Devi,
If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
The Modification parameter provides modules whose use can be controlled using additional parameters.
This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
Prerequisites
The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
Procedure
You use the modules as follows:
       1.      Select a module from the sample modules.
       2.      Specify the module in the Modification parameter of the Analysis Web item.
       3.      Control the display and behavior of the module by specifying the module-specific parameters.
Result
The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
Example
For example, you can define a fixed column width or display comments in cells.
For more info :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat..

Where is the Command Wizard in BEx Web Application Designer(WAD) 7.0

Hi,
I am new to SAP and BEx Web App Designer and am reading through the help about the so-called Command Wizard. I have looked all over the app and I see nothing called a Command Wizard.
I am I missing something obvious or is this buried somewhere in the app?
Based on how much it is mentioned in the help, I would assume it should be somewhere visible.
Brian

Hi,
"Command Wizard". When you design Web template one of your web item called ' Button ' have this ' Command Wizard'.
Go to Button properties -
select internal display-----select list of button---there you will find action Command trigger-----Command Wizard.
Ali.

WEB APPLICATION DESIGNER - ERROR

Hello
We're getting an error when we try to save an item in BEx Web Application Designer:
RSBOLAP 018 Java system error: An Unknown Error Occured During Portal Communication
RSBOLAP 018 Java system error: Excepction in method processFunction
Has anyone experienced and solved this issue?
Thanks in advance, kind regards!
Jon

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

Print PDF file with the lay out created in the BEx web application designer

Got the following questions (problems) when print a web report created in BEx Web Application Designer to a PDF file:
1. The tile (which has a company logo and report name in it) was not printed, is it possible to print a title (with company logo) on each page of the PDF file?
2. Want print the filters that have value specified on the PDF file, is it possible to do this?
Any help is appreciated, thanks.

Hi Simon,
you can achieve this requirement i.e. using this way of implementation:
1. Create a new template which contains the required fields (company logo etc) and set the visibility of the top container to "hidden". Add a empty data provider to this template and add the filter values (variable names) you want to display on the PDF. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
2. Open your original template and include the template you created in step 1 (Advanced: Web Templates). Choose the appropriate location (above/below the analysis item.
3. Check the settings of your export command: do not set a special web item to be printed.
If you export the template within web the second template should be printed correctly.
Brgds,
Marcel

Web Application Designer -Unknown Error Occured during Portal Communication

we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

How to suppress Result rows in a Query in Web Application Designer

Hi
I am trying to post a query in Web Application Designer. I am able to run the query in WAD but the Results rows appear. I choose Suppress Result Rows always in All Characteristics option in the query in BEx Explorer but still i see result rows in the WAD. Can anyone please let me know how to suppress Result rows so that they dont appear in Web Application Designer.
Thanks,
Padma

To get the enhanced menu-
1. Open the template in WAD.
2. Go to Web Item properties.
3. Go to Entries in Context Menu.
4. Find the "Enhanced Menu" property. Set it to "display" if you want it to be visible in template result.
5. Next time when you execute your template you will be able to access it by right clicking.
or
If you just want to supress results without adding enhanced menu in the context menu, simply set "Calculate result as" to "No Display".

Insert a BSP Application in Web Application designer template (WAD)

Hello to all
I like to place a BSP Application in my Web Application designer template (WAD). Have someone a good idea how to display a BSP in a web item.
We use BW 7.0 .
Thanks a lot for any good idea.
Christian
Edited by: Christian Baumann on Nov 10, 2010 3:46 PM

Christian,
There are many ways you can do this ...
1. In Portal - you can have two iviews for the same and run both of them together ( there was something called client side eventing or something like that before - I am not sure if it still exists
2. In WAD - use frames - use one frame for the WAD template and the other for the BSP ( I have never tried it in WAD 7.0 but it works in 3.x where you can introduce frames
3. Possibly have the BSP as a link in the template so that it opens up separately ..?
4. Instead of embedding the BSP into your WAD - embed your WAD into the BSP ..? this is also possible since the output of the template is HTML - but then you will have a hard time getting the context menu , export to excel etc which are all taken for granted in WAD.

Web application designer web item missing

Similar Messages

Maybe you are looking for