WEB application designer - Web items - How to create new

Hi!
Is there a way to create new web item in web application designer, and <b>NOT</b> a copy of existing with different parameters (Web items located under Standard tab).
It would expand possibilities of web app. designer a lot!
Another question is, how to use BSP elements in BEX WEB reports (templates). Is this possible or not?
Thank you in advance!
Egi

Hi,
in principal you can write new web items but this is not supported by SAP as this is a modification.
You would inherit from a standard web item class (for example CL_RSR_WWW_ITEM_VIEW) and maintain tables rsrrenderer rsrrendereratr rsrrenderert and optionally rsrrendererdep
BSP itself can not be used, unless you include a BSP Application via Iframes in your Web template.
Heike

Similar Messages

  • Web Application Designer - Analysis Item

    Hi Experts,
    We are using Analysis Iten property (Column From And Colum To) to display one few key figures from Query. This is because we are using same query for differnt Analysis items with differnt key figures.Now issue is we are having few key figure nodes collapsed in Quey designer. Analysis item is not considering the sub key figures of collapsed note. So whenever we expand a node a run time,the key figures at the end are not getting displayed. Please provide any solution for this issue.
    Thanks in Advance,
    Reshma M

    It is because the column numbering changes when you expand a collapsed keyfigure.
    Create a query view with the keyfigure(s) that you need for the analysis web item. Then use this query view for the analysis web item and remove the settings on Column From/To properties.
    Regards
    Francis

  • Web application designer web item missing

    Hi,
    I have a problem with the WAD designer, when I'm designing a new web template and I drag and drop any web item to my template layout, the item appears without image and with a message "Table: Image missing". I try to solve the problem deleting the wad cache, and eve reinstalling the SAP GUI, but it still happening.
    Can anyone help me please!!
    Thanks!
    Rodrigo!

    Hi Rodrigo,
    Welcome to SDN.
    Please check your IGS setting, check this posts for more information:
    BW and IGS
    IGS Error
    hope it helps,
    regards,
    Parth.

  • Web Application Designer - Chart Item - BW Release 3.5

    Hello,
    I have a problem with the new chart item in BW 3.5.
    I cannot show the data table within the chart item.
    In BW 3.0B there was an easy possibilty to switch "show data table" on/off.
    Please help!
    Thanks in advance

    Hi Tim,
    You can still do this, but you will need to add it to the HTML code.
    See the last attribute in this for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/489d39d342de00e10000000a11402f/content.htm
    Hope this helps...

  • How to create own Web Items for Web Application Designer

    Hi all,
    is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
    Is this possible?
    Or ist there any possibility to get the Web Item's data by an interface?
    Any support is welcome...thanks in advance!
    Best regards,
    Dominik

    if you want to create your own webitem check out the link given by other sdner.
    if you want to be able to execute BW query using abap you can check out the following weblog.
    /people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
    Regards
    Raja

  • How to create a date range in Web Application Designer

    I am using 3.1 version of Web App Designer.  I need to create a report with date ranges.  I can get one date to work but not two (I need a start date and end Date).  My Query has 0CALMONTH with a variable for Interval.  When I select it as a dropdown (??) in Web App Designer, I only get one date prompt in web app designer.
    Any suggestions??
    Thanks
    Kristen

    Hi Kristen,
    I'm sorry i'm not coming to solve your problem,but for the trouble I have had,and I want to create a date picker in Web Application Designer,so if you have solved the problem ,please email to me? [email protected] ,thx very much!
    best regards
    zegion chan

  • New to wad?can u tell me how web application designer works?

    new to wad?can u tell me how web application designer works?

    Hi,
    It is very simple :
    1) Create the query on a datatarget in teh query designer.
    2)  Open the WAD ,select new webtemplate .
    3) Drag  and drop required Web items
    4) Specify the Quaey(created in step 1) as the Data provider for all selected web items (in step 3).
    For detail explanation refer:
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Print PDF file with the lay out created in the BEx web application designer

    Got the following questions (problems) when print a web report created in BEx Web Application Designer to a PDF file:
    1. The tile (which has a company logo and report name in it) was not printed, is it possible to print a title (with company logo) on each page of the PDF file?
    2. Want print the filters that have value specified on the PDF file, is it possible to do this?
    Any help is appreciated, thanks.

    Hi Simon,
    you can achieve this requirement i.e. using this way of implementation:
    1. Create a new template which contains the required fields (company logo etc) and set the visibility of the top container to "hidden". Add a empty data provider to this template and add the filter values (variable names) you want to display on the PDF. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
    2. Open your original template and include the template you created in step 1 (Advanced: Web Templates). Choose the appropriate location (above/below the analysis item.
    3. Check the settings of your export command: do not set a special web item to be printed.
    If you export the template within web the second template should be printed correctly.
    Brgds,
    Marcel

  • How to suppress Result rows in a Query in Web Application Designer

    Hi
                 I am trying to post a query in Web Application Designer. I am able to run the query in WAD but the Results rows appear. I choose Suppress Result Rows always in All Characteristics option in the query in BEx Explorer but still i see result rows in the WAD. Can anyone please let me know how to suppress Result rows so that they dont appear in Web Application Designer.
    Thanks,
    Padma

    To get the enhanced menu-
    1. Open the template in WAD.
    2. Go to Web Item properties.
    3. Go to Entries in Context Menu.
    4. Find the "Enhanced Menu" property. Set it to "display" if you want it to be visible in template result.
    5. Next time when you execute your template you will be able to access it by right clicking.
    or
    If you just want to supress results without adding enhanced menu in the context menu, simply set "Calculate result as" to "No Display".

  • Creating Views in Web Application Designer

    Is there a way in which we can create different navigational views for a query in Web Application Designer. Can anyone give me a step by step process for the same.
    Thanks,
    Neha.

    Wond,
    I have created a query in the Bex query designer and when i am trying to do a SAVE AS its only allowing me to save it in either favorites or roles. I want to save it as one view and build a few views with different key figures and have all the views in a drill down fashion so that when the end-users run the query, by running a specific view they will get all the relevant data. How can I achieve this is query designer. Could you explain elaborately.
    Thanks Again,
    Neha.

  • Security for creating web templates using web application designer

    I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
    The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
    Any help would be greatly appreciated.
    Jeff Ehritt
    925 827-6012
    ChevronTexaco

    Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
    The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
    Thanks,
    Jeff Ehritt
    ERP COE SAP BW Security

  • How to maintain Master Data through Web Application Designer layout.

    Hi.
    I’m Internship and I have to do something that it doesn’t work.
    I explain to you.
    I have to make a layout via Web Application Designer to permit users to add a line in the master data XST_RFC.
    For that, I did two things:
    First I followed this url : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&overridelayout=true&38392712686871
    The result; I have a problem with the appendix of method execute “DATA : ZL_WORKTEXT Type ZFREETEXT”. Here, SAP doen’t permit me to put XST_RFC (my characteristic to add by the user) but just /BIC/PXST_RFC… So, I tried with that and at the moment of the test in the Wad, the application say me “no Master Data in XST_RFC”. I know that there are no MD in my char, I just want to add once…
    So it doesn’t Work.
    Secondly, after testing, the Function Module test works. When a put an ID in the test page of SAP Logon in parameters, the FM put this ID and create a new line with this new ID. So I had an idea, use directly this function module in a Fox Formula but, when a call my function, I have a problem with variable/parameters type.
    My variable is TYPE XST_RFC , but my parameters is TYPE  /BIC/PXST_RFC….
    My Fox Formula
    DATA NEW_RFC TYPE XST_RFC.
    NEW_RFC = VARV(XVOU_RFC).
    CALL FUNCTION ZBWDSST_XX_MASTERDATAMAINTAIN
    EXPORTING
    VAR_RFC = NEW_RFC.
    My error message Types of parameter VAR_RFC () and variable NEW_RFC(C) are inconsistent
    If you can help me, I work on this issue for 4 days and I waste my time.
    Thanks.
    BR

    Dear All,
    The text flow for 0WS_QUEST & 0WS_QSTNNR is sufficient to make available Criteria from source system questionnaire in BW.
    After the text load (even it does not generate SID) we can already use Tcode SRM_VE_GROUPING & SRM_VE_WEIGHTING for customization of groupping and weighting in BW.
    Regards,
    Viresh

  • Web Application Designer broadcast select Web Items

    Hello all,
    I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding"  Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
    Thank you in advance!

    Found it:
    - New Button
    - Action = Command
    - Commands for DataProviders/ Hierarchies / SET_HIERARCHY

  • Prevent values being passed using Link Item on Web Application Designer

    Hello all,
    I have a question regarding 7.0 Web Application Designer. I am using the web item Link Item and using the command OPEN_TEMPLATE_DIALOG to open a new WAD Template BUT I do not want to pass the values from the original WAD template to the new one. Is there a way to restrict passing any values to the new template? Am I using the correct command OPEN_TEMPLATE_DIALOG?
    To better describe what is happening, my characteristics and key figures are being passed from my original WAD template to my new WAD template when using the OPEN_TEMPLATE_DIALOG. I do not the values to be passed, only to open up the new WAD Template with its own reports.
    Thank you.

    Sorry maybe I mistated the problem. I do not have an issue with the variable screen when transitioning to the second WAD template screen, I have a problem due to the values from the first WAD template being passed to the second WAD template.
    My first WAD template using the Link Item is only for the ability to click on the text to open up a second WAD template which I do not want the values to be passed from the First template.
    I hope this clears up the confusion.
    Thanks

  • How to restrict Web application designer access in BW 3.5

    Hi
    We are using BW 3.5 on WAS 6.4 and want to restrict access for Web Application designer. I found Note 605417 and when I asked our Basis team to apply that, it didn't let them apply it says component already applied. When we check as per note functional module RSAH_TOOL_AUTHTY_CHECK, commented part not uncommented. I will appreciate if any one help me finding solution in this situation?
    Thanks,
    Yash

    Hi,
    This problem Could happen when you referesh quality or test system.
    Your delta setup for the related master and transaction data needs to be reinit.
    What happens is when you init. the delta and subsequent delta is all maintained in your source system
    please check Notes 852443,424848,834229
    Hope this helps
    Thanks
    Teja
    Message was edited by:
            Teja badugu

Maybe you are looking for