Web archive files

does anyone know how i could get web archive files into FCE?? they are documents that are public domain from a website and i want to use some of them in my prod but FCE says ''unknow file type" i tried text editor "save as" but only get web archive.
any advice or knowledge??
thx
jim

http://puffin.creighton.edu/lakota/1805_un.html is the site
the format just says "web archive" when i click get info...finder shows the safari logo and the word "archive"
am i being stupid or what? i have never experienced this b4????

Similar Messages

  • My challenge: recovering original iWeb files from 2010-2011 timeframe, which included a blog consisting of original postings from me and comments posted to the web from family and friends. I have the web archive files - but did not move iWeb files then.

    Background:  I started this blog while living overseas and going to sea with the Navy.  Missed the opportunity to move the iWeb files with content attached from the mobile.me server to another server.  Now, I have the original web archive files - good - but not the comments added to them by family and friends - bad.
    My ultimate objective is to create a hard-cover bound book of these files with the comments on the blog ... they document a rather significant experience in my family's life ... to do this, I need to recover the original files with postings.
    Any thoughts or insight would be sincerely appreciated!
    Thanks, cfwnavy

    You have replied to a post that is a month old now and the OP has never replied, so you are probably wasting your time here.
    If you read the OP's post and my reply, you will see that he will not be able to recover his blog and neither will you.
    If your Mac was stolen and you did not back up your iWeb domain.sites files, then you CANNOT get your blog back. 
    If you published your site to a host/server, then you can download it back onto your Mac and you will have to re-build your blog/website from scratch and re-publish, but all your replies and responses to posts will be lost and you can never get these back.
    My advice would be to re-create your blog in another format such as WordPress.com which is free and don't use iWeb again.
    There are plenty of alternatives out there.

  • Opening  Web Archive files in WebCT

    "This document is a Single File Web Page, also known as a Web Archive file. If you are seeing this message, your browser or editor doesn't support Web Archive files. Please download a browser that supports Web Archive, such as Microsoft Internet Explorer."
    This is the message I get whenever I try to access the page for class outlines, ect. They are usually powerpoint type things, but they open in Word (on Windows).
    I have tried using Firefox, Opera, Safari, Internet Explorer, copy/paste into Word, and saving it as a PDF. It works perfectly on Internet Explorer when using Windows.
    Is there anyway I'll be able to access these kinds of pages while I'm on a Mac?
    Macbook Mac OS X (10.4.8)

    When viewing brought Safari the same picture ca only be saved as a Web Archive file format.
    That's because you're not saving the pictures you're saving the page that contains them.
    Drag and drop the images from the Safari Window to the desktop and then import them from there to iPhoto.
    iPhoto is not a web browser and cannot read web archives.

  • Why does a specific web archive file show in a finder search by a specific person's name?

    When searching by specific person's name in Finder, a specific .web archive file saved from a Safari browsing session appears. Why is this? Was the person's name entered into the browsing session? Was the .web archive file sent to the person?

    Thank you for your initial response. Is there a way to view the web archive to see what is in the archive in detail? Cheers,

  • I'm trying to move a folder full of "web archive" files to my IPad Mini. It says device missing services. Any ideas?

    Hey all! Recently got an IPad Mini. Already have a Macbook. I have a folder full of songs(lyrics and chords) on the Mac. The file type inside the folder are all "Web Archive". I am trying to transfer this folder to my Mini, via Bluetooth. It won't allow me to transfer, it says "device missing services"? I have no idea what this means. Any help would be great. Thanks in advance.

    You can't transfer files to another device using bluetooth.
    I'm not really sure you can transfer web archives from mac to iOS device using itunes or icloud.  Remember, on an iOS device, any file has to belong to an app.  The device does not have a file system like the mac where you can move files into any folder you want.

  • Web Archive File.... Help needed!

    Hey everyone, I just rcently bought a powerbook g4 for school. One of my teacher puts his notes on the internet to view. I went to the webpage and clicked on the link for the notes. A page loaded up saying that my web browser doesn't support archive files. That I need a broweser to do so, such as internet explorer. I tried downloading internet explorer but it says it's no longer avalible for apples. I called apple support and they said to try fire fox but the same error came up. I went on internet explorer on an IBM to see what the page looked like and it seems to be in a powerpoint format... I do have powerpoint downloaded, so I don't think that could be a case of the problem. What should I do? Doesnt anyone know of a browser I could use to open the archives or of a way to downloaded? Any help would be great, thanks guys!!!!.
    Seth

    but you indicated that your teacher posted a page for you to get stuff... "i clicked the link" ..... so... how about downloading the file that the link goes to? or is it not a link rather a webpage?
    I guess I don't know what problem you are seeing. Can you take a snapshot of the error/pages?
    Beavis2084

  • App that will read .mht (firefox web archive files in this case)

    as above, tried a few which claim it, but they lose the formatting by quite a bit, just looking to be able to look through all the mht files i have that were predominantly created on firefox
    thanks for any suggestions!

    If you don't mind, I am going to terminate discussion of Web Dynpro ABAP here. It is not that I want to, but we are in a difficult position with this development, and can not really discuss it too much.
    But, let me first make a few (last) comments:
    (*) BSP is available since WebAS 610 (which is now nearly at the end of its lifetime). WebAS 620 is the main platform out there, with NW04 (WebAS 640) now shipping, and the next product is inevitably coming. If you keep in mind that SAP supports each release at least 7 years, and we will be shipping BSP in an upcoming release, you can see that with BSP you are not going to left stranded for many years to come.
    (*) Web Dynpro Java is out and shipping. A very nice development environment. You can build nice things with it.
    (*) Web Dynpro ABAP: it will become a very nice product as well. We should know :). But, it will definitely not ship on NW04 platform. Which unfortunately means the next great NW shipment (both naming and date is not available).
    From our experience, most people seem to make their decisions based on the available Java versus ABAP skills in the shop. However, the other factor to look at is also "pixel perfect" rendering. Only with BSP can you influence the rendering. Web Dynpro is more a development platform for business applications, and as such they must conform to the designated model/concepts, etc.
    brian

  • How to trash safari web archive video files

    I have a web archived video file that I need to get rid of. When I move it to the trash and execute trashing it I get the dialogue that the file cannot be trashed as I don't have the permissions to do so, ie."The operation cannot be completed because you do not have sufficient privileges for some of the items"
    I've checked the get info data and as the administrator for the eMac it shows me as having read write privileges for the file.
    Is there a way to overpower whatever permissions the trash requires to get rid of this file.

    I'm still not able to figure out how to trash the subject web archive file.
    This sounds a lot like the problem Linda Jenkins had in her "Can't delete files" topic which was resolved when it was discovered that her desktop was locked. Upon unlocking her problem was solved.
    My desktop isn't locked, so my earnest hope that I would find the same soln. has been dashed.
    I've tried to use terminal to rid myself of this file using the sudo rm -rf command, but I keep getting the "operation not permitted" warning in terminal.
    Now what? I suspect something very simple is causing my problem, but as a novice I'm not being successful with any of the things I've tried.

  • Safari 5 not showing Web Archive pages

    Hello, I have Safari 5, and I can't see some of the pages that I need to see. This has been a problem for me for a while, not matter what version of Safari I use. I click on the link from a website, and when the page loads, instead of getting the page that I should be getting, I get a very long page, covered in system codes, or something of the such, and at the top of the page, it says, in typewriter-like font,
    "This document is a Single File Web Page, also known as a Web Archive file. If you are seeing this message, your browser or editor doesn't support Web Archive files. Please download a browser that supports Web Archive, such as Microsoft Internet Explorer."
    After that, it goes into the code. I have looked other places on the internet, but never found anything like what I am experiencing. Any help from anyone? Thanks.

    HI,
    .mht
    Definitely Microsoft "The MHT file type is primarily associated with 'MHTML Document' by Microsoft Corporation. Archived Web Page. When you save a Web page as a Web archive in Internet Explorer, the Web page saves this information in Multipurpose Internet Mail Extension HTML (MHTML) format with a .MHT file extension. All relative links in the Web page are remapped and the embedded content is included in the .MHT file. The absolute references or hyperlinks on the Web page remain unchanged and the .MHT file is viewed using Internet Explorer. Note: This file type can become infected and should be carefully scanned if someone sends you a file with this extension."
    http://filext.com/file-extension/MHT
    with a program that will not be supported by Safari/Mac?
    That's it.

  • Creating Web Archive in Safari ver. 5.1.5 (66534.55.3)

    Does anyone know if safari change Version 5.1.5 (6534.55.3)?
    I used to be able to right click on my macbook's trackpad and easily create a web archive file while viewing Internet pages.
    thx

    Welcome to Apple Support Communities.
    I'm on OS X 10.6.8 and Safari 5.1.5 (6534.55.3)
    When you right-click, do you see this screen?
    Choose Save Page As, and then you have the opportunity to (re)name the file and select the Web Archive format as shown below.

  • I downloaded a magazine as a web archive and want to know can I convert it to a PDF file and if so, how do I do that please

    I downloaded an magazine as a web archive and want to convert ii to a PDF file. Can I do this and if so, how ? Thank You

    Thank you Frederic, however when I click on "open with", 3 sidebars (?) open in this order ..Safari (default); Textedit; Other. If I click on "other", another window opens with "recommended applications" highlighted. Preview is not one of the chosen applications. However if I click on "all applications", Preview is then highlighted, but it only has an "open" window and I don't get an opportunity to File>Save as PDF.
    I hope this makes sense...ellietess

  • How to get the path of the web-archive on the local filesystem?? [Apache]

    Hello all,
    Im running a webapplication on a tomcat server.
    I need to find out the path of the web-archive on the local filesystem to access several files.
    How can I do that with out having an instance of HttpRequest or whatever??

    Hello Bruce.
    Please take a look at the following KBase article.  It has a sample that will retrieve the folder structure for a specified Crystal Report template based on the instance name in the file store.  The sample there can be easily modified so that it is based on a specific infoObject id.
    1549728 - How to find the folder structure in the CMC of a report template based on the instance file name in the output file store.
    The KBase can be retrieve from the following link:
    https://bosap-support.wdf.sap.corp/sap/support/notes/1549728
    Please note that the KBase article is retrieved through the Service MarketPlace.
    I hope this helps.
    Regards.
    - Robert

  • How do I save a document that says it is a web archive

    I signed up to convert pdfs into word format but now I don't know how to save the converted document into my files. It says it is a web archive and I cannot work with the document. I can't cut and paste. What do I need to do?

    When you say you want to convert PDFs to Word, there is no obvious link with Adobe's RoboHelp product. Are you in fact working with RoboHelp or have you perhaps asked in the wrong forum?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Can't open Web Archive

    Thanks for reading. I have a number of web archives saved and understood them to save whatever was shown, notwithstanding future changes to the page. Am I correct in my understanding?
    Trying to open some (not all) of these pages, I get "There was one opening error... choose Activity from the Window menu." The pages will not open.
    Choosing Activity shows-
    "file:///Users/martin_bell/Documents/Documents/Finances/Sandys%20Tax/Sandy's%20 return%202006:2007.webarchive 1 of 2 items (1 error)".
    These were saved on a previous iMac and transfered using target disk mode. Any ideas?
    Thanks.

    Hi Martin
    safari & webarchives is a little err, less than ideal... although most of the images/items are stored in the archive - they don't always seem to get displayed by safari if they're no longer on the web - hmmm.
    web archive folderizer extracts all stored items from the webarchive into folders, but doesn't produce a nice, easy to click icon that displays it all in a browser - however, it might let you find the items that don't show up.

  • Problem deploying plug-in archive file in 11.1.0.1.0

    Hi,
    I am trying to create a very simple plug-in in Grid Control. It has only one metric. I follow the steps to create the archive file, import it, and when I tried to deploy the archive, I got error message said: "At least one error has occurred. Refer to the Deployment Status page for more details". And the deployment status has: "Deployment operation failed on the agent with an error status". Where can I find more detail about this error?
    I also tried to download and deploy the sample plug-in file and the apache Tomcat plug-in, both give me the same error. Is the plug-in works for 11.1.0.1.0 or is there any special patch I need?
    Thanks for the help!
    Edited by: user12621404 on Nov 24, 2010 4:18 PM
    Edited by: user12621404 on Nov 29, 2010 12:37 PM

    I have the same setup as the OP, but I connected one ipad to the mac with the configurator so I COULD tap once, to see what it would do next.  When I did, nothing happened.  I also tried to step through the setup screens, but can't complete that before the configurator times out. 
    In answer to potential questions, I set them up as unsupervised because they're going to teachers.  I just want to update iOS, set up the wireless, add a web clip that points to our student information system, and preload a couple of apps I think everyone should have.  I don't want the teachers to not be able to sync to iTunes.
    So what gives?  I tells me to tap, but doing so does no good.
    All the profile does is set up the wireless and load the web clip.  The configurator will do the rest without loading a profile.  Is loading a profile simply incompatible with not supervising the iPad?

Maybe you are looking for