WEB-AS JAVA type TS not removable from SLD

Hi Experts,
I have a peculiar issue where In I have a ECC 6.0 ( SID :- RD1) added in my SLD of PI 7.0 as WEB-AS ABAP Type Technical System.
I was able to work with the corresponding Business System in my ID( configuration). But two days back when I logged in to view my SLD , I could see that in my Technical System category there are two instances of RD1 one WEB-AS ABAP and other WEB-AS JAVA . Now I suppose WEB-AS JAVA type TS for RD1 was created by mistake. But now when I am removing it from the TS category and also removing the instances created under BCSystem and SAP JAVA cluster in content maintainence. I see the WEB-AS JAVA type TS appearing again in the TS after some time. I repeated the same several times and also start/stop the SLD server but then after sometime again the WEB-AS JAVA type TS for RD1( ECC 6.0 - not required) appearing in the list of TS.
I am unable to understand this absurd behaviour. I have carefully removed all the instances from the content maintainence but still it appears after sometime.
Are there any other possible places where there can be instance created for the WEB-AS JAVA type TS in SLD server where from I am supposed to remove it ???
Regards
Nishant

Hi Nishant,
You question is little confusing
Case1. Are you saying : You made TS (Say XYZ) for ABAP part of an SAPECC system and next day you found a TS with the same name (XYZ) for the same SAPECC system, but the component was JAVA In short you have two TS one for each ABAP & Java Part of the same systems.
Case2 :1. Are you saying : You made TS (Say XYZ) for ABAP part of an SAPECC system and next day you found a TS with the some other name (ABC) for the same SAPECC system, but the component was JAVA In short you have a TS for each ABAP & Java Part of the same system. If this is the case then, how is this possible both cannot have same name
Regards
Suraj

Similar Messages

Deleted attachments are not removed from Content Server

We have setup Content Server to store business documents and create attachments in documents in CO. Both types are stored ok and can be opened without any problems. After deleting them though, they disappear from the Attachment List but when looking in CS, attachments created on the document still exist in CS. Stored business documents on the other hand are removed properly.
Looking at statistics in CSADMIN shows that the deletion of the created attachment does not increment the "delete" counter.
Any ideas on why the created attachments are not removed from CS upon deletion?
Thanks

We have solved this issue now. By design, the attachments are not removed directly from the content server upon deletion; Instead you will need to run report RSBCS_REORG to completely remove them from the Content Server.
Edited by: Christian Nordvaller on Jan 26, 2010 3:53 PM

After deleting users they are not removed from portal30.wwsec_person

I am building a customized script to carry on users self registration.
the script is going great and user is created and i can log into portal
successfully with this new created user.
I relogin as portal administrator and delete this new user and now if i tried
to list portal users I cant see the user.
But when I try to rerun my script to recreate this user again it fails when I
investigated I found that it fails because the entry of this user is removed
from portal30_sso.wwsec_person while it still exists in portal30.wwsec_person
so the script fails as there is duplicate in primary key.
Is this a bug in portal 309 that when the user is deleted it is not removed
from portal30.wwsec_person

This is actually a combination of intended behavior/design and a bug.
Let me first explain why there is a user in both the PORTAL30_SSO schema as well as the PORTAL30 schema.
The definition of the user, that can log in, and defines the single sign-on account, is the user's entry in the
WWSEC_PERSON$ table in the PORTAL30_SSO schema. The SSO server actually just uses a subset of the
columns in this table -- those defined in the WWSSO_SSO_USER view.
The same table exists in the PORTAL30 schema, because there is a lot of common infrastructure code
shared by both applications (Login Server, and Portal). The Security and Session Management code
is common, and this code includes the dependency on the WWSEC_PERSON$ table.
Now, assuming that the code was independent (for the sake of argument), why do we still have an entry
for the user in both schemas? As I mentioned earlier, the user entry in the SSO schema is the "master".
The SSO server can have multiple partner applications connected to it. Indeed, on my.oracle.com, the
login server there has at least 4 portals hooked up to it, and a few other non-Portal partner applications,
such as Oracle Mobile.
Each partner application may have a local user profile that it uses to store application specific attributes
of the user. This is stuff that the Login Server is not interested in, and could in no way predetermine for
all conceivable partner applications. So, it is not unreasonable for each partner application to also have
a user record which stores additional attributes of the user (not related to user authentication), and which
can be used to reference other user-related data. For example in the Portal, all the user's privileges
and group memberships are tied to the Portal's user record (foreign key constraints). So, the Portal
being just one partner application of the Login Server, it adhere's to this model and has a user entry
in it's schema corresponding to the user entry in the Login Server.
When a user logs on and accesses a partner application for the first time, the partner application (read Portal)
is expected to automatically create a local profile entry for the user on demand. The Portal does this.
In 3.0.9 and previous versions, to delete a user, you need to delete the user in the Login Server AND the Portal.
The only way to do this is to first delete the user in the Login Server, using the User Portlet.
Then type the user's name into the Portal User Profile portlet (they won't be in the LOV anymore since
you just deleted them from the login server), and click Edit, then Reset To Defaults (this means delete).
You will then get a User Not Found error, since the page is trying to go back to show the details about this user.
(All this has been fixed in 9.0.2 v2, by the way).

Infopath form not removed from central admin after retracting the solution

I have InfoPath form admin appvoed deployed through Stat machine workflow when I retracting some forms are not removing from Central admin
when trying to deploying it says
Error 3 Error occurred in deployment step 'Add Solution': An object of the type Microsoft.Office.InfoPath.Server.Administration.FormTemplate named "urn:schemas-microsoft-com:office:infopath:" already exists under the parent Microsoft.SharePoint.Administration.SPFarm
named "SharePoint_Config". Rename your object or delete the existing object.
I have tried renaming the file as well
MCTS,ITIL

Hey shahid
try to use force command to uninstall/remove solution,then only add solution.
if this not work out then first uninstall feature using force and manually delete feature folder from file system inside layouts.
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

PO Approval Items Workitems are not removed from the Universal Worklist UWL

Hi,
Certain of our purchase orders require approval, they are sent to the relevant approver via workflow to their SAP inbox (SBWP) and universal worklist.
When the user executes the workitem (Approve or Reject) The workitem should be removed from the universal worklist and SBWP when refreshed.
The problem we experiencing is that the Workitems are not removed from the UWL after they have been executed. The SBWP is behaving correctly and the items are removed.
It is not all the workitems that have this problem, only certain ones - but there is no pattern.
Thanks for the help.

Hi,
The user B approved the PR accessing the transaction SBWP or via PR transaction directly?
If via PR transaction directly, then your workflow needs a Wait Event step.
Regards,
Kleber

Workitem is not removed from User Inbox

Hi,
There is requirement, when the PR is created by user, first it has to go his department Head and then to Manager, AGM, GM, etc. There are different departments.
I'm maintaining organizational structure and giving positions in Release Strategy. Now how can i know who has created and to whom it has to go first. Shall i create different release strategy for that ?? Or is there any other way ??
And i tried to create custom workflow and using two release steps instead of one. And giving Rule in my first release step. And in second release step i'm using the strategy. When i create the PR and release, it is not removing from User Inbox.
Do anyone know what could be the problem ??

Hi,
From your requirement, its not a good idea to have all department heads assigned to a single position.
But, you can have different positons for different departments and the association between department and the corresponding position number can be maintained in ztable. Then have a custom rule based on function module which will make a call to this ztable and find the corresponding postion given the department of user, get this position out and use it as agent assignment in step. However to use above first you should be able to find the Deparment to which a given user belongs to.
the position that you are talking about in your question, is it a position with relevance to HR structure or is it just that you have created for workflow purpose. In general its a good idea to have bit strong dependency with HR structure rather than going for workflow specific positions. If your position is a HR position then probably with bit of reengineering the HR organization structure with respect to your departments would be good and with a good design of org structure you can also get rid of any new custom table to maintain the relation between department and corresponding position.
Good Luck !!
Regards
Krishna Mohan
ooops !! many replies came in while drafting this mail itself, i guess rule using custom table already tried !!
Edited by: Dubbaka Krishna Mohan on Jan 29, 2008 9:20 AM

Long time ago I trialed elements 9 and could not remove from Programs; still can't

Long time ago I trialed Elements 9 and could not remove from Programs at the time; still can't?
I didn't go forward with '9' because of its size and it didn't appear to provide advantages for the cost.
How do I uninstall it when conventional methods fail. Message received in Windows Installer is, ' The feature you are trying to use is on a network resource that is unavailable.' Elements 9 cannot be used.

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

Machines not removed from AD when reimaged - Not Installing client- how to resolve client not installing

Hello, i have across a machine that does not have the sccm agent installed, but states on the server that it is installed. Now I am assuming that someone in the team reimaged but did not remove from AD. If this is the case, how do i resolve this? I have
2,000 clients so need to know how widespread this is.
i checked the client logs but there are no ccm/sccm entries. I know i could probably remove from SCCM then run a Discovery Method, but if there are more out there, i need to find a fix potentially. The client is not installed on the image. Boundarys all
set ok.
SCCM 2012 R2
Cheers

You could create a new collection with a query to find out when a clients last heartbeat was or maybe hardware inventory data age? This isn't going to completely solve the problem, but it will narrow down which clients your after. The queries I have below
have an age value of greater than or equal to 30 days. Just increase this obviously to query for clients that haven't reported back in longer amounts of time.
Heartbeat Query
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where AgentName in ("Heartbeat Discovery") and DATEDIFF(day,AgentTime,GetDate())>=30
Hardware Inventory Scan Date Query
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where ResourceId in (select SMS_R_System.ResourceID from SMS_R_System
inner join SMS_G_System_WORKSTATION_STATUS on SMS_G_System_WORKSTATION_STATUS.ResourceID = SMS_R_System.ResourceId where DATEDIFF(dd,SMS_G_System_WORKSTATION_STATUS.LastHardwareScan,GetDate()) > 30)
Its also likely that clients in this situation will be marked by Config Manager as inactive. So you could also just sort by your inactive clients but this again will have a % of error as your inactive clients may be a result of workstations being off your
network for a prolonged period of time or simply turned off.
If you can ping a client that has a hardware inventory age of greater than 30 days but you have a client policy to run it say daily, then you could argue they fall into the category your after.
You could also look at this outside of the Console all together. A possible option could be to use a startup / login script to check for the presence of the Config Manager client and then install it if its not (there are quite a few about). If you're not
comfortable with this, then you could use a startup / login script to check for the presence of the client and write say a hostname or something similar to a text file.
Cheers
Damon

IPad not backed up icon will not remove from screen

iPad not backed up icon will not remove from screen

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

You won’t be able to use it. Ask eBay for a refund.
(120398)

When i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm

WD Java - Type does not exists

Hi folks,
we use the RFC Import in WebDynpro JAVA and import a function module of name like /tyed/myFunction where /tyed/ is a namespace.
when running that application we get an error on a structure which is of name like /tyed/myStructure and in JAVA the namespaces are translated from /tyed/ to __tyed__
The dump says com.sap.dictionary.runtime.DdException: Type ordmon.types.__Tyed__Atcp_S_Ordmon does not exist
But these data-types do exist? are there any known problems with namespaces ???? or what could that be.
kind regards
oliver

Hi Oliver,
The most likely reason for this kind of an error could be the follows
The backend to which to connect at Runtime is not the same as the backend from which you imported the model. This could cause inconsistencies. You need to run with the same backend from where you imported your model or the version of the RFC in the backend used at runtime must be compatible to the one used to import the model.
Data types have changed in the backend, such that the Type you imported earlier no longer exists. You need to re-import the model again.
Regards,
Arun

Previously deleted messages are re-downloaded, not removed from server??

I have a POP email account that I access from my iMac using Mail. I regularly delete mail from my inbox in Mail, so there are only a few hundred messages in the inbox. But the other day I logged onto my mail account via the web and discovered thousands of my previously deleted messages still in my inbox on the server. I opened Mail Preferences and discovered that the checkbox "Remove mail from Server ... when I move it from my inbox" was not checked, so I checked that box. However, I figured that would only cause future messages that are removed form my inbox to be removed from the server, but would not do anything about the thousands of previously deleted messages that were still on the server. So I also clicked the button labeled "Remove Now". I figured that would cause Mail to tell the server to remove all the old messages on the server that had previously been removed from the local Mail inbox.
The next day I discovered that thousands of old messages I had already deleted (many of them long ago) had mysteriously reappeared in my Mail inbox. And of course, checking the account via the web, I discovered they were still on the server too. What did I do wrong? I thought Mail would tell the server to delete all those old messages. Instead it seems to have told the server to download them all to my Mail inbox again, the exact opposite of what I intended. I don't know if this is a disconnect between the Mac Mail client and the mail server, or if I misunderstood the purpose of these options in the Mail preferences dialog.

Hello,
I have never tried this exact action, but I think the Remove Now will not do much, with When Moved from the Inbox. This would require the action of removing the message, after this setting has been changed. I don't think it would remove any previously moved from the Inbox, because no check to correlate the current contents of Inbox to a POP account.
Does this make sense, to you?
However, there would appear to be some corruption in the file to prevent duplicate downloads, or messages previously downloaded.
In Mail 2.x, Apple introduced a way to look a the server, of even POP accounts. To do this, control-click on any inbox or any mailbox, and choose Get Info. Once the dialogue window is presented, and if you have more than one account, choose the account, and you can not observe the server contents, but also choose and delete individual messages.
Keep us posted about future behavior.
Ernie

The removed photo albums in iWeb are not removed from my website.

I have removed a few photo albums from my web site in iWeb and added none. When uploading the changes to my website it still shows all the albums only the links of the removed albums are not valid any more.
How can I get the albums completely removed from my site via iWeb?

Welcome to the Apple Discussions. You are hosting your site on a MobileMe account, correct?
Try publishing the entire site with the File ➙ Publish Entire Site menu. If that doesn't clear out the old stuff from your web site try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and and try again.
Still if not cleared out publish the site to a folder on your hard drive and open the local copy with your browser to see if that shows the changes to the site.
Happy Holidays

Oracle AQ: Message not removed from source queue after propagation

Hi.
I have been playing around with a test setup for a "fanning out"-propagation system.
I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
I am using Oracle 10g.
Here is my setup:
--Test payload
CREATE OR REPLACE TYPE test_payload AS OBJECT(
test_id NUMBER,
test_dt DATE);
commit;
DECLARE
subscriber SYS.aq$_agent;
BEGIN
--- Create Originating Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
--- Create Destination Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
--- Create Destination Queue2 and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
--- Add Subscribers and schedule propagation
subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
--Propagation to queues
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
commit;
END;
--Put something on the queue
DECLARE
message_handle RAW( 16 );
MESSAGE test_payload;
nq_opt dbms_aq.enqueue_options_t;
nq_pro dbms_aq.message_properties_t;
begin
nq_opt.visibility := dbms_aq.immediate;
nq_pro.expiration := dbms_aq.never;
MESSAGE := test_payload( 2, SYSDATE );
DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
COMMIT;
END;
I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
-AA

WEB-AS JAVA type TS not removable from SLD

Similar Messages

Maybe you are looking for