Web Based Access to standarrd Transactions/reports in WAS

We have ECC5.0 in our company . I want to know are all the transactions/reports web enabled in WAS server . The company has a web page that has many BW reports and drill down takes you to the Delivery Screen (SAp)( in IE ) . i need to way to set up a web based Interface for a Report/screen/tcode in WAS ? Is it possible ...they want me to provide them with the address of web page that will open the delivery screen in SAP in IE ?
How can that be done ?
Thanks.

Hi Rich ,
Thanks for the insight . Any Doc/Method of how to use ITS . I havent done it before . Would appreciate of you can give some initial method to proceed ahead ?

Similar Messages

VMware server Console -- not the web based access

Dear All,
I want to install vmware server console to do Oracle RAC practice, So kindly let me know from where can I get the exe file to install it.
FYI , I installed Vmware server version2.0.2 but it's ( Web access infrastructure ) , and I don't want this version , I need the other one which it's an application not the web based.
Regards

Please have a look..
http://www.petri.co.il/virtual_install_vmware_server.htm
abirhasan

No Web Based Access PAP2

I have a PAP2 connected to a WRT54GS.
I pick up phone, dial ****110# and write down the IP address provided.
Load up IE and type the same address into the address bar. IE can't connect to it (it bounces to my Google search page).
I log into the WRT54GS and check the DHCP Clients Table, and it identifies the PAP2 as having the address stated and entered above.
Am I missing something here?

The IVR 7932# feature is password protected by your Internet phone service provider. (The Web-based Utility is disabled by default because you will not need to use it unless instructed to do so by your service provider.) You may want to verify the password of your PAP2 from your Internet phone service provider.
Since the Web-based Utility is disabled by default, only your Internet phone service provider can unlock that and they’re the only one authorized to configure and Enable the Web Server.
For Factory Reset, pick up the phone attached to your Linksys, dial ****73738#, press 1 to confirm and then hang up the phone.
For PAP2 manual, refer to the link below:
http://www.net2phone.com/partnerships/distributors/product/broadband/pdf/n2plinksysinstallguide.pdf

How do I set up a Web-based access page to allow access to the internet through my router?

My wireless router is a WRT54G. I own/manage several condos in a building and guests change all the time. I want to set up a network with internet access similar to hotels and airports where access is granted after being directed to a web page and entering a password. How do I set this up? (I have several domains/websites if this is needed.)

Not with standard firmware and no other equipment.
If you want standard firmware and warranty and service you have to look at more expensive equipment.
For some WRT54G you can flash 3rd party firmware which opens up the Linux on the router. See the wikipedia article for "WRT54G" for a start. Also check out dd-wrt. Some people there use the WRT in hotspot setups with dd-wrt. They should be able to point you into the right direction.
Otherwise, what you are able to do with the WRT and standard firmware is radius authentication with WPA or WEP (called WPA Enterprise or similar...). This however, does not redirect you to access through a web site. You have to enter the username and password when you connect wireless to the router on your computer. If it matches you get access. Again: there is no web site involved here and if you don't know the username/password you cannot access anything not even an internal, free homepage. This also does not work for wired access to the router.
Message Edited by gv on 11-25-2007 08:44 AM

Web Based Access & TimeOuts

Read all the blurb about using a cut down Mail Client to avoid timeouts and I can understand why this might/will work.
However, I'd like to know why having migrated from Yahoo Mail to BT Mail that the decision has been made to provide a less robust, slower and less functional service.
Why does your Web Client now Timeout so quickly when previously it didn't
Don't BT Customers deserve a premier service for the premium costs they pay?
So dear BT when replying please don't repeat the "Use a small Mail Client" response be constructive and be honest tell us all why you have done this.
Doug

Hi,
Terminal server or Citrix server is mandatory for their remote access to B1. Only Remote Desktop Connection is not good enough.
Thanks,
Gordon

Web based access

Is there a way to setup an email service so people can access there e-mail through logging in on a website using the Xserve?

SquirrelMail is already pre-installed. http://www.squirrelmail.org/
Just create a new site and point it to: /usr/share/squirrelmail
And that's it!

Looking for the best web-based replacement tool for Crystal report

Hello everyone,
A few days ago, I installed JDeveloper and went through the tutorials posted on oracle.com and have not known all the feature yet.
In our office we provide end-users with crystal reports against our oracle database, and this fulfills their needs fairly enough but, recently, we received a request from some of remote users to use those crystal reports. So I just wanted to know whether ADF can replace a crystal report if I try to migrate them? A crystal report has rich functions. For example, I use DistinctCount(Param1, Param2) to display the number of distinct param 1s in each param 2.
Any kind of suggestion would be much appreciated.
Thank you.

Came across: http://www.docstoc.com/
Don't know if it works for you. There is always the thing with privacy.

Web based reporting engine integrated with APEX

Hello,
I would like to use some completely web-based reporting solution for my application. My idea is that I will create some datasource, prepare database query and publish some data columns to end users (datamodel). They will choose from many of prepared data areas, create their own report using some intuitive web-based report designer and save it. I do not need it for any analytic purposes, no dynamic filters, graphs and other widgets, no BI. It will be all only about building text based reports with few dynamic fields (customer address, actual date etc..).
For example: User will prepare some document (template) with few paragraphs and add some of prepared dynamic fields into it (ie. company name, customer address, repeating table with list of employees, some image). Then he will be able to generate same document for many customers etc..
I am looking for some simple, user friendly web based application. Some external report builder for example for Jasper reports is not what I am looking for.
I will need to integrate it with Oracle 11g XE with APEX 4.2 so some API or URL parameters is must.
Used reporting engine does not be completely free, but I am able to pay max. $5000 for it
Do you have some tips?
Thank you

This could be a solution for APEX reports (interactive reports). But I want to create more complex reports, not only table based reports.
I need to create for example invoice report with some dynamic fields (customer, invoice items...), another report can be for example some contract about cooperation with some dynamic fields (contract number, personal information ...).
These reports will be mostly only text based without any table. See example bellow. How would you generate this kind of letter?
"Hello <CUSTOMER_NAME>, we would like to offer our new product <PRODUCT_NAME> to you..."
Where CUSTOMER_NAME a PRODUCT_NAME are prepared fields (from some database tables). It will be something very similar to Microsoft Word automatic mailings. User can generate many text based reports and save them as PDF.
I need to find some web based product, that will be simple for users and can be integrated with APEX.

Logo To be Displayed on Discoverer plus (Web Server Access)

HI All,
I Am Developing a report in which ,i have to insert a logo(.bmp) into the report title and i did that by entering "FORMAT TITLE" menu and iserted a .bmp file.
But the problem is this ,the logo thus inserted is not visible on Discoverer Plus (Web Based Access).
Please help me out to resolve the same.

Hi,
Based on your description, I understand that DEVICES tab disappears from Remote Web Access website after RemoteApp
configured. If anything I misunderstand, please don’t hesitate to let me know.
à
But now I cannot figure out how to get to my server's Dashboard, because when I go to my main web acess site (that ends with "/Remote"), the server is not listed
under devices.
Did all users encounter the same issue when access RWA? Please open Dashboard and navigate to USERS tab, then
click the problematic user account and select View the account properties. In Properties of this user account, please navigate to Anywhere Access, then please check if Computer option was checked in
Show selected links on Remote Web Access. Meanwhile, please also use an administrator user account to check if this issue still exists.
In addition, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs\WebApps folder and check
RemoteAccess log file if find more clues.
Hope this helps.
Best regards,
Justin Gu

Web-Based File Sharing

Hey All...
I've got a brand new Mac Mini Server I am trying to learn. I am wondering if there is a way to create web based access to my file sharing (specifically the Group folder). I would love to add it to the auto-generated myPage, but webDAV would work too.
Any ideas?
All help is appreciated!
Thanks!
Kevin

We've been using it for a couple of weeks with good success. It can authenticate from your LDAP user database via proxy, or you can add users separately in the Crush environment. The browser interface is much better than Rumpus, It's cheaper, and it's very customizable. You can even set up rules which send out emails when files are uploaded, downloaded, etc. at the global or user level. Very sweet indeed.
http://www.crushftp.com

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Web Based Reports

Hi,
I have a problem where my company doesn't want to
spend any money on new software but also wants web
based reports. I don't want to re-invent the wheel
here and am trying to develop a list of reasons why
we should'nt. Page breaks and numbering comes to mind..
HTML can't handle page breaks so how can I actually
make the printer spit out a new page?? Please help
with a good list of reasons to I can convince Mgt to
kick down with $ for a reporting package..I just get
the feeling that developing this on my own will only
lead major functionality problems that are hard to
anticipate (that package software already solved).
Thx!!

Hi John,
You could take a look at Oracle9i Reports features here (here you can get some reasons your mgmt might be interested in)
http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/datasheet_reports.html
You can see how many tools/plugins/samples/whitepapers are available for a professional reporting solution like Oracle9i Reports
http://otn.oracle.com/products/reports/htdocs/getstart/GettingStarted/index/index.html
You could search this Discussion Forum itself on any topic (like "printed reports", or "web-based reports") to get an idea of the kind of problems one might encounter in an enterprise reporting solution, and the professional support users can get. Customers have access to 24X7 support, and a website listing helpful notes, latest patches, etc.
http://metalink.oracle.com
Hope that helps,
Navneet.

I need Web based Dynamic Reporting tools

Hi,
I need a Web based Dynamic Reporting tool.
I have to user oracle products and this reporting tools must support OLAP and Data Warehousing.
thanks,

Hi Shima,
Let me quote from Oracle Reports website:
"Oracle Reports is Oracle's award-winning, high-fidelity enterprise reporting tool. It enables businesses to give immediate access to information to all levels within and outside of the organization in an unrivaled scalable and secure environment. Oracle Reports consists of Oracle Reports Developer (a component of the Oracle Developer Suite) and OracleAS Reports Services (a component of the Oracle Application Server)."
Since you need a web-based reporting tool, this is what is available with Oracle Reports:- you cannot design reports on the web, but you can use Oracle Reports Developer to design high quality reports that are suitable for viewing on the web.
Oracle Reports support OLAP as a data source.
From your requirements, it seems that it might be worthwhile for you to check out Oracle Discoverer which is again a powerful reporting and analysis tool. Oracle Discoverer is more suitable for ad-hoc reporting and web-based analysis of data by the end-users:
http://www.oracle.com/technology/products/discoverer/index.html
Navneet.

Web Based Reporting Suggestions...

Hi,
Can anyone suggest a way to be able to access data from an Oracle database and publish the results to the web (intranet or not) without using Oracle Reports. I have to implement a solution where the turnaround time needs to be fast for requirements. I will appreciate your help.
Regards
Mahathi

Discoverer Viewer is a web based reporting tool that can be called from a URL. Check out the syntax at http://otn.oracle.com/products/ias/tech_tips/july01.html. You can specify query parameters by prefixing the parameter names with "qp_". Reports ("workbooks") can be created very quickly using Discoverer Desktop Edition or Discoverer Plus.

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

Web Based Access to standarrd Transactions/reports in WAS

Similar Messages

Maybe you are looking for