Web-based apps not connecting

My son, who lives 90-miles away from me with my ex, has had a problem with his iPod touch. Ironically, we just had it replaced do to a hardware failure last week.
Web-based apps, such as facebook, (or his favorite, iFunny), will not connect to the Internet, despite him connecting to wi-fi. Very strangely, browsers, such as Safari, and Chrome, do not have this problem.
I am hoping there is some setting I don't know about that he has toggled that will fix all this and save me from a 90-minute drive to the genius bar.

Does the iOS device work OK when connected to other networks?
Do other devices connect with those apps?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

IPhone 5 unable to connect to internet or use web-based apps like Facebook or Tumblr

About two days ago, shortly after using my iPhone 5 to upload a picture of my son eating a donut to Facebook, I seem to have lost all ability to connect to the internet or update content on web-based apps like Facebook or Tumblr. I tried to restore my iPhone in iTunes on my computer but could not do that without first turning of "Find My iPhone," in the iCloud section of my settings. When asked to enter my password to turn off this feature the phone is "unable to connect to iCloud." It doesn't seem to matter if I'm connected to WiFi or using my cell data - I'm getting a strong signal in either case, but the phone is unable to connect to anything. I CAN make phone calls and send texts but that's just about it.
I recently updated to IOS 8.1.1 but it worked fine for several days before this problem started. Any ideas?

I reset my network settings (Settings > General > Reset > Reset Network Settings) and rejoined my network, and that seemed to fix it. Apps are working on wifi and on data, and I can once again send imessages. Since I couldn't find a similar post very easily, I wanted to post this for whoever needs help with this problem ;D

E72: Web-based apps try using connection other tha...

I bought my wife an E72 yeasterday. After we charged the battery up and turned it on, everything seemed to work alright. I set up the WLAN connection on my wireless at home, and I tested the use of Facebook, MySpace, etc. Her SIM card needs to be topped up, so the phone keeps saying "SIM Registration Failed." We're going to top it up this morning, so no worries about that. This morning she tried using the Facebook app, but instead of conecting via WLAN, it says "Connecting via IDEAS" which is the Singtel SIM card here in Singapore. I've manually connected to my Wifi network here, and even went to the connection manager to set the priority to 1. The app still doesn't connect via WLAN, and instead tries to use the SIM. When she does top up her card, this could be a quick money waster, especially when we have an abundance of Wifi connectivity....so how do I get the web-based apps to use WLAN over anything else?
Thanks in advance!

JimSG wrote:
Hadimassa, thank you for pointing me in the right direction! I was able to do this for the Facebook app, and now it works without any problems. Can something similar be done for the Ovi store, or other services, like downloading languages for the dictionary app? Both of these options attempt to use the Singtel IDEAS method to connect, but because it's a prepaid phone, it's not possible. Any way to make them use the Wifi, or can this not be done over this type of connection?
Thanks in advance!
I'll bet you can. Check the English manual on page 137 about Accesspoint Groups and Priorities.
http://europe.nokia.com/support/product-support/e72/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Connection SQLite with Flex Web Based App??

Hi! I have a problem, I create a Flex Web Based App in Flash Builder 4 and I need connect that app with my SQLite database... but I can't found the method that permit me create that connection.
My question is... exist some method or some kind of code with I can do the connection?
Can someone help me, please?

SQLLite is only available in AIR apps.
The preferred method for a web-app is to use some kind service architecture to expose your data. I wouldn't be able to offer any specific advise without knowing more about your deployment environment.

Following iPhone 2G update to OS 3.0.1, cannot use web or web based apps

I recently updated my iPhone and iTunes. iPhone is now running OS 3.0.1. I use o2 as my service provider.
I have had a few problems, all of which have been solved by these discussion forums, so I am hoping this final, highly annoying thing can be sorted.
I cannot access the web. If I enter Safari, a message pops up saying
"Could not activate cellular data network - you are not subscribed to a cellular data service"
Now, for a start, I'm not entirely sure what they mean - is it a problem with the phone or with O2?
I have a little circle next to the carrier name, which I believe (having gone through a troubleshoot on the Apple website) means I have a service of some kind, or my phone recognises a service?
(I'm not technically minded, can you tell!)
Obviously I have no web connection, so I cannot use any of my web based apps either, which is highly irritating.
I'd be really grateful if anyone can help. Thanks in advance.
Message was edited by: Lou1985

Hi there. I too had this problem after upgrading an iPhone 2G from OS 2.1 to 3.0.1. I solved it by doing the following:
Select Settings > General > Network > Cellular data network and then change the Cellular data APN to: mobile.o2.co.uk (assuming you are an O2 customer). I think that resetting the network settings under Settings > General > Reset > Reset Network Settings also works.
Hope this helps.
Tim

Cannot log in to web based app builder

I have created an app for iOS and would now like to do an Android version, so following the instructions on the Adobe site I try and log into the web based app builder but get the following message 'ERROR This account does not have permission to access App Builder. Learn more about how to resolve this problem.'
The log in I'm using is definitely the account administrator, I have even given admin privileges to another member of our creative cloud team and tried logging in with these details but alas, the same message appears.

RE: Make sure the account you use to sign in to App Builder has a "DPS App Builder" role assigned to it. Use the Account Administration portal to assign roles.
Hi Bob,
I am having the same problem. Could u tell me how to check that I have DPS App Builder role?
Let me know
Thanks,
Rush

Why ipad safari freezes while other web-based apps work ok?

I tried resetting history and cookies, this fixed problem for awhile, but lasted matbe 30 minutes before safari froze again ie no progress on progress/url bar.
All other web based apps work fine including other non-apple browser, newspaper downlod/update etc. Safari on ipad4 works ok on same wifi network, desktop imac on ethernet connection works ok too. Help suggestions appreciated.
ozziozzi

Hello ozziozzi,
Thanks for using Apple Support Communities.
Have you tried quitting the Safari app and launching it again? How about restarting and resetting the iPad?
Restart or reset iPad
If something isn’t working right, try restarting iPad, forcing an app to quit, or resetting iPad.
Restart iPad. Hold down the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake button until the Apple logo appears.
iPad may be low on power. Connect iPad to the USB power adapter to charge. See Charge and monitor the battery.
Force an app to quit. Hold down the Sleep/Wake button on top of iPad for a few seconds until a red slider appears, then hold down the Home button until the app closes.
If you can’t turn off iPad or if the problem continues, you may need to reset iPad. Do this only if you’re unable to restart iPad.
Reset iPad. Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
You can reset the word dictionary, network settings, home screen layout, and location warnings. You can also erase all of your content and settings.
Restart or reset iPad - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a74dff0
Take care,
Alex H.

Web Dispatcher does not connect to J2EE..

Hi,
The web dispatcher is not connecting to the J2EE anymore. This was working fine until i installed the SSL certificate on the J2EE engine. The dev_webdisp log file shows messages as below
[Thr 4880] Tue Aug 28 14:56:48 2007
[Thr 4880] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 8;205.178.189.131:56000) [nibuf.cpp 4603]
[Thr 4880] *** ERROR => Connection request to host: cpcep2.pnrw.org, service: 56000 failed (NIECONN_REFUSED) [icxxpool.c 1948]
i am able to telnet from the webdispatcher to the portal on port 56000.
Portal is on EP7 SP12
any idea why this might have occured ? and how to get the connection back ?
Thanks in advance!!

Check out the following links...it deals with setting up Web Dispathcer with SSL
http://help.sap.com/saphelp_nw70/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
This link points to the SSL Paramters to be configured in the profile file.
http://help.sap.com/saphelp_nw70/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
-Abhishek

Capture iPhone camera and microphone using QuickTIme in a web based app.

Hi all.
Can I capture video from iPhone's camera and audio from the mic. using QuickTime in a web based app. ? Of course on the iPhone 3G and 3GS. I need this because I want to let users to use the iPhone for a web based video chat. So theoretically my point is to use QuickTime to capture an a/v signal from a Mac camera/mic. or iPhone camera/mic., to encode that a/v signal (QuickTime knows to encode to H.264/AAC right?) and to send the encoded stream to a server. Is this scenario a realistic one? Can it be implemented ? (I don't have any experience in programming with iPhone and Mac...)
Btw. do you know any emulators for iPhone that runs on Windows 7?
Thanks,
Tudor

Hi
See this Thread
Last login date & Time
Kind Regards
Mukesh

Apps not connecting

For some reason, my iPhone does not connect with most Apps (including the App Store). I have full signal strength and can send/retrieve emails without problem.
I have turned the phone on and off. Even did a refresh (holding both the Home and Power buttons down until the apple logo appears). Nothing seems to make a difference.
And on some apps, I can connect (such as American Airlines). It doesn't make sense. Especially the App Store app to update apps not connecting.
Does anyone have any ideas?
Thanks

I am having the same problem. Can send/receive email and text messages, but cannot connect to game center server.

How to link folio to web-based app builder?

Hello,
I'm building a native Android app through the web-based App Builder (on Windows machine). That part went well. But how can i link my folio from within InDesign CC to that app? I expected the App Builder to ask me where to find it, but it didn't. So now, i created just an empty app ... Anybody?

In the General tab, you specify the Application account and password, as described in the Building native Android apps help article.
Application Account / Password. Select the Application account (also referred to as a "Title ID") used to publish the folios that will appear in the app library.
Have you used the Account Administration tool to configure and Adobe ID with an Application role? And have you used Folio Producer to publish one or more folios in that account as Public? If so, those published folios will appear in your native Android app when you download it and add it to a device.
You can also download the Android version of the Adobe Content Viewer from the Google Play Store to test folios in your account. Keep in mind that the native viewer is still catching up to the iOS viewer's feature set. Again, these limitations are described in that article.

Running Opera, flickr, teashark and web based apps...

I am unable to run web based applications like opera mini flickr cellity Teashark and others.
Whereas opera,flickr are some inbuilt apps but still unable to access internet through them.
Internet accessing is fine via default browser but none of the web browsers like Opera mini, Teashark,etc are not working.
Its not the problem of Network since on my other mobiles, apps run fine.
Please reply with the solution for the problem so that i can access web via web based Java Apps.
Message Edited by aparichit on 11-Oct-2008 12:49 PM

m so sry my net connection was nt working so couldn't reply
ok so here is step by step procedure:
Menu->Settings->Configuration->Personal config. sett->Options->Add New->Access Point:
now what you hav to do here is dat basically you need to know the access point of the setting you want to use key in the access point there. user name and password are nt needed usually.
save that access point and go back to the configuration page nw in 'preferred access pt.' set dat access point which you created just nw.
this process worked for me mayb this works for you all too. (i've presumed dat you all have got your internet services activated from your provider)
if you don't knw the name of your access point then your operator's customer care centre could be of some help..
Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

Web based worklist not working...

Hello,
(on wlpi 2.1 on weblogic sp2)
I've created a process that utilizes a stateless session bean. Every thing works
fine when using the fat-client worklist.
I wanted to use the web-based worklist with my process, so I did the following:
1.) Installed the %wlint_home%/samples/bpm_api/jsp/worklist.war from the weblogic
console.
2.) Tweaked the "startWeblogic.cmd" file (I'm in NT) to add the wlpi-worklist.jar
file into the classpath. (this is all in the reamde file in %wlint_Home%/samples/bpm_api/jsp/)
This works at first, as I can get to the login screen, but as soon as I log in, I
get a "Classnotfound error" saying it can't find my home interface for my session
bean.
So, I figured, "Must not be in the classpath (somehow)". I added my bean .jar file
into the classpath, and then try again. I get a different error that says "Classnotfound
error" for the EJBHelper. Same error happens on the fat client in both cases.
I can simply take out my startWeblogic classpath changes, and restart the server,
and the fat-client works again (but the jsp worklist doesn't not -- no surprise.)
Has anyone been able to get the jsp-based worklist to work with a process that uses
an EJB?
dave

I totally lost my internet connection via the router WRT54GS V6
I am connected directly into the computer from my cable modem.
I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
All proper lights are working on the router and modem.
Could the router be just be broken?
It seems to be getting worse and worse.
help please.

Web-Based Setup, not working

Hello...
When I go to the Web-based setup...wireless/security..
nothing is available.
I can't change the keyphrase, or security type WEP WPA andy such darned thing.
It's just not there 90% of the time.
Then once in a blue moon it shows up.
Upgraded all the firmware and such, factory default and the likes.
It used to work at one time. If I could just drive there or contact the wizard of OZ maybe something might happen.
help.
Thank you
Message Edited by crazygirl on 04-06-2008 06:47 AM

I totally lost my internet connection via the router WRT54GS V6
I am connected directly into the computer from my cable modem.
I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
All proper lights are working on the router and modem.
Could the router be just be broken?
It seems to be getting worse and worse.
help please.

How can I distribute my web-based app properly?

I created a web-based application that contain CWGraph3D.ocx and CWAnalysis.ocx. My ComponentWork's version is 6.0. During development and compilcation, there is no problem (I developed my app. in VB6sp5). After that I use Package and Development Wizard of VB to create HTML page and its cab file. During this operation, I got the message mentioned that my CWAnalysis.ocx (only this ocx) doesn't match with the register in the registry. I just clicked on 'No' to accept this. Finally, I create LPK file to include in my html page file. My LPK file includes runtime licenses of CWArray, CWMatrix, CWComplex, CWDSP, and CWGraph3D. After I uploaded my app to web site, the other computers can load my web page, but it is the bla
nk page because something wrongs in the components. There is no any nofication or error from Internet Explorer. So I tried to test something to find out the problem. I remove CWAnalysis and redo all processes, it doesn't work. I remove CWGraph3D and redo again, it works! So I moved back CWAnalsysis, and redo it again, it doesn't work. I assume that there are some problems in ComponentWorks. But I don't know how to solve this problem.
Thank you.

So the error message basically says that CWanalysis control does not match with the information in the registry. Did a re-install help any? Is this the only development machine causing the problem. One thing to try is re-installing the control, by uninstalling Measurement Studio, unregister the cwanalysis.ocx ( using regsvr32), delete the ocx file, reboot and then re-install Measurement Studio. This would make sure that the controls get installed correctly.
Also, check out this link for dealing with issues of the Package and Deployment wizard.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Web-based apps not connecting

Similar Messages

Maybe you are looking for