Web-based utility will not load on new wet54g ethernet bridge

I just got a WET54g ethernet bridge to connect my bluray player to my existing network (wrt54gs router). I cannot get the setup cd to recognize the bridge connected to the laptop or the router. I thought that it would be no problem, just use web-based set-up. When attempting to access 192.168.1.226 I have to enter the password three times and then a blank page is loaded. Chat support ended up getting disconnected, so no luck there. Supposedly some of the steps chat wallked me through updated the firmware through ftp download, but I feel like nothing was done since you can't access the set-up page. Any suggestions are welcome. I'm running vista if that helps.

Start it from Scratch...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your WET54G(ethernet bridge), wait for 30 seconds and re-connect the power cable...Now re-configure your WET54G(ethernet bridge)...Follow the link here to re-configure the WET54G(ethernet bridge)...Also under the configuration type select Static IP Address : For IP Address enter : 192.168.1.226, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 and save the settings...
After doing these you can unplug the Ethernet Bridge from the router and power cycle your router and the ethernet bridge both...Connect your ethernet bridge to your bluray player and test for active connection...

Similar Messages

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?" I click Yes and it begins to process again for a few minutes. Then it displays the following Invalid Unicode file error message...and simply stops processing or installing. In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
Thanks for your interest in helping!
b
Bob Horton, MS
972-786-6445
[email protected]
www.rshorton.com

SOFTWARE CD WILL NOT LOAD ON NEW COMPUTER USING WINDOWS 7

IPOD NANO SOFTWARE CD WILL NOT LOAD TO NEW COMPUTER USING WINDOWS 7. ANY ADVICE PLEASE?

Software CD? You shouldn't need to use that anymore. You can download the latest version of iTunes from here.
http://www.apple.com/itunes/download/
B-rock

Email attachements will not load in New Email, but load in reply

I create a new email, to a person in outlook office 365, It will not load and attachments or pictures. If that person sent a email, I can go to reply and attachments load not a problem. Only in new email it will not load.
jack walsh

Hi Jack,
As S.Sengupta said, please submit a new case on Outlook support forum as they will be more professional on your issue:
Outlook IT Pro Discussions
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Applet will not load for new user until IE is opened

I have a C# project that runs an embedded web browser. When the project installer runs it will load java if it is not on the computer. Everything works fine for the admin user. When I switch to a new user and try to run the embedded web browser the applet just shows the red x in the top corner. Oddly enough, if you open IE and then try to run the applet again the applet will run properly. Has anyone run into this situation before?

I have a C# project that runs an embedded web browser. When the project installer runs it will load java if it is not on the computer. Everything works fine for the admin user. When I switch to a new user and try to run the embedded web browser the applet just shows the red x in the top corner. Oddly enough, if you open IE and then try to run the applet again the applet will run properly. Has anyone run into this situation before?

My MacBook Pro's airport Utility will not recognize my new time capsule.

My name is Sam. I am not very computer savvy, but I am trying everything I can to get this time capsule to work. I have a MacBook Pro that has been getting the internet via a DSL connection. I am using a Versa Express VER170P dsl modem. I do NOT get wireless internet with this router. I bought the time capsule based on advice that I would be able to use it to get internet wirelessly in my condo. I have plugged the printer into the usb port, I have plugged my internet cord into the WAN slot and plugged the power cord into the wall. The TC shows the green light, but my Airport utility just scans indefinitely never finding it. Can anyone help? If so, please use basic terms. =)
Thanks,
Sam

Hi and welcome to the discussions.
The green light is a good sign so far.
Try connecting an ethernet cable from one of the LAN ports (there are 3 of them)on your Time Capsule directly to your MacBook Pro and then see if this helps AirPort Utility locate your Time Capsule to you can configure it.
If no luck, try shutting down your system and restarting. Modem first for a few minutes, then Time Capsule until you have the green light, then your computer.
Once you have the Time Capsule configured, and you are ready to make your first backup, keep the ethernet connection to Time Capsule as there is a lot of data to be copied and it will go faster and more reliably with this connection. Subsequent backups will normally be much smaller and quicker, so you could use wireless for these if your prefer.

IPhone 4S WILL NOT load my new music!

ever since i upgraded to ios6, my iphone wont go past step 7 when i try to sync my new music,it says "determining tracks to sync" and then it will say "iphone can not complete sync because iphone has been disconnected" but its still plugged in and still registering in itunes! I have tried restoring my iphone, after about 20 minutes it will say that my phone has been disconnected (ive tried switching usb cords thinking there was a broken wire in the cord or something) so i cant even restore my phone to see if that fixes it... ive googled answers for this issue and tried everything everyone has said and i STILL cant load my music! it will show up in my library but it will be in grey lettering... CAN SOMEONE PLEASE HELP ME!! i have owned every iphone since they first came out and never had an issue like this

also - i have tried deleting itunes and loading it again, retstarting my computer and my iphone, and still nothing... and if i leave my phone to try and get past step 7 (for example it was trying to sync while i posted this thread) if i go to click on itunes again it wont open itunes

Firefox will not load any new add-ons

When I try to add add-ons, firefox says "connecting" and runs and runs and runs and never adds the add-ons

If you aren't able to connect in Firefox, but can connect with other programs, the most common cause is a firewall. See [[Firewalls]] for instructions on configuring firewalls. (Make sure you configure all firewalls that are installed)
Another possibility is that you are in offline mode. Make sure "Work offline" in the File menu is ''unchecked''.
For other causes, see [[Error loading web sites]]

Running Windows 7. All updates of Firefox after 5.0 do not work. How can I solve this. Tried several trouble shoot solutions already. They are not working. Pages will not load in new versions

pages just won't load in versions after 5.0. They load fine in any other browser, including Firefox 5.0. I'd really like to upgrade.

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

I have a G4 MacBook Pro and I just updated Firefox; it will not load the new Firefox and gives me an error code 10661; how do a load and use the new updated Firefox?

I am currently using Firefox 3.6.9
My operating system is Mac OX 10.4.11
I have downloaded the most recent update for Firefox and it won't load.
How do I load this recent update?

See also:
*http://kb.mozillazine.org/Firefox_crashes
*http://support.mozilla.com/kb/Firefox+crashes+when+you+open+it
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

FireFox will not load any web pages and says to check firewall. What can I do?

I updated the new version of FireFox and now when I open it Google appears the way it should but when I type into the search bar or type in a web address it will not load. The message says to check my internet connection and my firewall to make sure firefox is allowed to use the web. Everything looks ok to me and I do not know how to fix it, help!

Hi JessN37,
We've got a whole [https://support.mozilla.org/en-US/kb/web-pages-dont-load troubleshooting section on failure to load pages]. Have you looked through any of that information? There is a ton of useful stuff there.
Hopefully this helps!

Ipad will not load new email

ipad will not load any new emails. i have one through outlook and one gmail. neither will load anything new.

Do you have a wifi or 3 g connection?
Did it used to work? What does the mail app do when you open it? Is there the little circle at the bottom, checking for new mail.
Have you checked the accounts from safari, or a computer, to see if it is an ISP problem?

Web pages will not load through Safari on all my computers using my AT

I am using Safari 8.0.5 and OS 10.10.13. The last couple days when using Safari through all my computers using my AT&T internet connection, web pages either will not load or they load very slowly. Safari will indicate it cannot find the site. If I run Safari, using all the same computers, through my Verizon MiFi Connection, it works fine. U-Verse works fine. Mail works fine through AT&T. I am able to use Internet Explorer through my AT&T connection on a work lap top without difficulty. I have deleted caches in Safari and deleted history in Safari. I have contacted AT&T and they do not know what is the problem. When I check my download and upload speeds for the internet using Safari and the AT&T connection, they are slow. When I do the same using the Verizon connection, they are fine. Does anyone have any ideas? Thank you.

You're not alone. I, too, was having the same problem today. I found your question and had seen that you had contacted AT&T with little success. I had gone to ufix.att.com and ran the self diagnosed test and system reset. My pages are loading a little faster now. Hope this helps.

Content of old emails will not load after Yosemite upgrade

I recently installed Yosemite. All my old emails are still there, listed under the 'Sort by date' column, with sender, subject and the first few words showing. but the content will not load. New emails are downloading and content showing fine. I have played around with all the settings in Mail Preferences Viewing — download remote content etc — but nothing seems to work. I have also run "Verify Permissions", with no luck. If I search for something through the Finder, and what I am searching for appears in an email, I can pull up the email that way and all the content loads fine. So the content is all there. It is just not showing up through Apple Mail. Any ideas?

Check the Ask before closing setting in the Terminal preferences dialog.

Blogs will not load

when trying to link to blogs on some web sites they will not load(blogs). Try to reload pace get to almost done and page goes blank.
== This happened ==
Every time Firefox opened
== I installed firefox

RealPlayer Browser Record Plugin has been reported to make pages go blank.
See Noah_SUMO's illustrated method to disable RealPlayer Browser Record Plugin in this thread : https://support.mozilla.com/en-US/forum/1/557689#threadId558168
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].

Web-based utility will not load on new wet54g ethernet bridge

Similar Messages

Maybe you are looking for