Web based utility won't let me use automatic dhcp setup

Hi I use an mac osx with cable internet. i can plug in the wrt54g router correctly and the airport appears, but when I try to use the web-based utility it won't give me the option for automatic dhcp! Help me Dianne
Message Edited by dsowings on 12-25-2007 09:18 PM

are you talking about the options in the "internet connection type" on the router's web interface ??
if yes, then ensure that the firewall on the computer is disabled.
Revert with the results ...

Similar Messages

310N - web based utility password

Trying to use web based utility. Instructions are to use password admin and leave user name blank. Does not allow me to enter. Advice??

When you configured your router, using the setup disk at that moment have you changed the router password, if yes then you need to use that password while loggin to the router setup page using web base utility.
If you dont remember your router password, then i think you need to reset your router. Press and hold the reset switch on the back of your router for 5 seconds (Dont hold the reset switch more then 5sec, other wise it will reset your router to factory defaults), and release the reset switch, now try to login to the router setup page using the web base utility.

Trouble using the Web-based utility

I have a WRT54G wireless router, V8, firmware 8.0.0. It is Ethernet-connected to a Windows Vista machine running SP1.
I am having trouble using the Web-based utility. I can access it but cannot make any changes. For instance, if I change the settings on the Setup page and click "save", I get a "This webpage is not available"
I tried updating the firmware and got the same message. Disabling my personal firewall has no effect. Resetting the router from the button on its rear panel has no effect. I tried using with both Windows IE and Google Chrome browsers and got the same result.
I have been using this router without problem for months using a a Windows XP machine. This problem may be associated with my changing it to the current Windows Vista machine. I no longer have the Windows XP machine.
Please help me. Thank you and Happy New Year!
- tom

I spent a full day unsuccessfully trying to make it work, including numerous Linksys utilities downloaded from the site. I could not conjure any support on Linksys chat, and the live body on the Linksys tech support line wanted to charge me $29 for his help.
I finally succeeded by purchasing and installing a Netgear wireless router ($44, Staples) that came up flawlessly the first time. The Linksys device is in my trash.

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

Error when loading web-based utility

i have numerous errors when i attempt to load the web-based utility in both IE and Firefox. most of them are java errors and seem to be related to the font. i've updated the java on my machine. i've also reset the router numerous times. part of the page will load but most of the options are missing. i'm at a loss to try to get the page to load correctly. please help!
Here are the errors that show up in firebug in Firebox....
Unknown property 'mso-style-parent'. Declaration dropped.
undefined
style.css (line 50)
Unknown property 'mso-style-parent'. Declaration dropped.
undefined
style.css (line 55)
Unknown property 'mso-style-parent'. Declaration dropped.
undefined
style.css (line 62)
illegal character
‹ '6ÐC
share.js (line 1)
illegal character
‹ $6ÐC
help.js (line 1)
share is not defined
<b><a target="_blank" href="HSetup.htm"><script>Capture(share.more)</script><br>...
192.168.1.1 (line 1202)
hsetup is not defined
<script>Capture(hsetup.phase38)</script><br>
192.168.1.1 (line 1201)
hsetup is not defined
<script>Capture(hsetup.phase37)</script><br><br><br>
192.168.1.1 (line 1200)
hsetup is not defined
document.write(hsetup.phase44);
192.168.1.1 (line 1167)
share is not defined
<TD width=101 height=25> <script>Capture(share.timezone)</script>...
192.168.1.1 (line 1065)
share is not defined
face=Arial> <script>Capture(share.wins)</script>: </FONT><...
192.168.1.1 (line 1034)
share is not defined
face=Arial> <script>Capture(share.clileasetime)</script>:</FONT...
192.168.1.1 (line 968)
share is not defined
face=Arial> <script>Capture(share.startipaddr)</script>:</FONT>...
192.168.1.1 (line 946)
share is not defined
name=lan_proto><B><script>Capture(share.disable)</script></B></TD>
192.168.1.1 (line 938)
share is not defined
type=radio checked value="Enable" name=lan_proto><B><script>Capture(...
192.168.1.1 (line 936)
share is not defined
<TD width=101 height=25> <script>Capture(share.dhcpsrv)</script>:...
192.168.1.1 (line 934)
share is not defined
face=Arial> <script>Capture(share.submask)</script>:</FONT></TD...
192.168.1.1 (line 902)
share is not defined
document.write("<OPTION value=0 selected>"+share.auto+"</OPTION>");
192.168.1.1 (line 837)
share is not defined
face=Arial> <script>Capture(share.mtu)</script>:</FONT></TD>
192.168.1.1 (line 833)
share is not defined
face=Arial> <script>Capture(share.domainname)</script>: </...
192.168.1.1 (line 822)
share is not defined
face=Arial> <script>Capture(share.hostname)</script>: </FO...
192.168.1.1 (line 811)
share is not defined
face=Arial> <script>Capture(share.routename)</script>: </F...
192.168.1.1 (line 800)
share is not defined
document.write("<OPTION value=1 >"+share.staticip+"</OPTION>")
192.168.1.1 (line 613)
share is not defined
href="DDNS.htm"><script>Capture(share.ddns)</script></A>...
192.168.1.1 (line 543)
bmenu is not defined
href="StaRouter.htm"><script>Capture(bmenu.statu)</script></A>...
192.168.1.1 (line 531)
bmenu is not defined
href="Manage.htm"><script>Capture(bmenu.admin)</script></A>&nb...
192.168.1.1 (line 527)
bmenu is not defined
<script>Capture(bmenu.gaming)</script></A>   &n...
192.168.1.1 (line 523)
bmenu is not defined
href="Forward.htm"><script>Capture(bmenu.applications)</script...
192.168.1.1 (line 522)
bmenu is not defined
href="Filters.htm"><script>Capture(bmenu.accrestriction)</scri...
192.168.1.1 (line 518)
bmenu is not defined
href="Firewall.htm"><script>Capture(bmenu.security)</script></...
192.168.1.1 (line 514)
bmenu is not defined

These are JavaScript errors and no Java errors. Java has nothing to do with them. Updating Java won't make any difference.
Do you run any software firewall on the computer? As the problems occurs on IE and Firefox it could well be that your firewall damages the JavaScript in the web pages. Firewalls like to do that to protect your "privacy".

Web-based utility bringing up blank browser page

We are using the WRT54G router for a combination wired and wireless home network. All is working fine except when trying to access the web-based utility from the wired computer, I get a blank browser page after entering my username and password. The utility itself does not display. I have accessed it previously and know I am using the correct IP address. This seems to happen quite often. Has anyone else experienced this or have any ideas? Thank you.

You said you entered the "user name and password". I think on your router, the user name should be blank.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
Message Edited by toomanydonuts on 09-30-2007 10:27 PM

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

When I use migration assistant it won't let me use my account name that I'm signed in with. It requires me to select a different user name and then creates a separate account where my files live. Why can't I select the user name and account name I have?

I'm trying to migrate my music and pictures over to my new iMac. When I use the migration assistant it connects to my PC fine but it won't let me use the account name and username that I have created as the admin. It requires me to create a new user account - so then I have two separate accounts to log in to which i don't want. How do I get it to let me use the current account that I have to move my files to?
Thanks!

Migration Assistant creates a new account and migrates all the information you have requested to that new account. There is no way around that. However once migrated you can move the data to the account you want to. Here are some instructions for doing so:
Transferring files from one User Account to another.

I have an iPhone 5 and updated it to iOS7 but now I can't use iMessage or FaceTime as it says "waiting for activation" and won't let me use my phone number to do iMessage or FaceTime either

I have an iPhone 5 and updated it to iOS7 last night but now I can't use iMessage or FaceTime as it says "waiting for activation" As well as that, it won't let me use my phone number to do iMessage or FaceTime it will only let me use my apple ID which I don't want to do.

Thank you for replying. Yes I deleted the old email address..

HT4759 I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

TS4268 In iMessage I'm trying to use my phone number but my phone number is greyest out and won't let me use it. What do I do?

In iMessage I'm trying to use my phone number but my phone number is greyed out and won't let me use it. What do I do?

In iMessage I'm trying to use my phone number but my phone number is greyed out and won't let me use it. What do I do?

I just got my iPad and the iMessage was working and than all of a sudden it stopped and when I tired to log back in, it said I had a bad connection which I didn't. So it won't let me use my iMessage

I just got my iPad and the iMessage was working and than all of a sudden it stopped and when I tired to log back in, it said I had a bad connection which I didn't. So it won't let me use my iMessage

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My CS6 liquify tool won't let me use the warp tool. I only have the cross hair.

The liquify tool in my CS6 only has cross hair and won't let me use the tool like it's supposed to. How do I fix that?

Panasw wrote:
The liquify tool...
Er, Audition doesn't have a liquify tool. Dunno which CS6 app does, but that's the forum you should post on.

I have iwork on two computers, but my account doesn't show record of it for my being able to reinstall on the new computer. Is there a time limit? I tried airdrop, but it won't let me use it.

I have iwork on two computers, but my account doesn't show record of it for my being able to reinstall on the new computer. Is there a time limit? I tried airdrop, but it won't let me use it.

Sounds like you installed iWork from before there was the Mac App Store.
If you installed it from a Family DVD you are entitled to install that on 5 computers and can do that from the DVD.
If not then you need to purchase it from the M.A.S. and will be able to install it on any of your computers using the same Apple I.D. However Apple is promising a new version before Christmas so it may not be a good time to buy now.
Peter

Firefox won't let me use any of the links-I can't add new links by clicking on the + box. I can't delete or add links. I can't even open one of the links at the top of this page Thanks

Firefox won't let me use any of the links-I can't add new links by clicking on the + box. I can't delete or add links. I can't even open one of the links at the top of this page

I'm not sure what you mean by "the + box". Is that a feature on one of your toolbars?

Web based utility won't let me use automatic dhcp setup

Similar Messages

Maybe you are looking for