Web Browsers hang when loading pages

Hi!
On my early 2011 Macbook Pro webpages take forever to load, and somthimes dont load at all. This happens with all browsers, in safari the blue progress bar stops at the first interval and sits there for a LONG time until it goes on, in Chrome it is hung on " Sending Request " . This does not happen on all webpages, it is random.
If anyone could help that would be great!

Ive fixed the problem. Just go into Chrome preferences > Under the hood and uncheck " Predict network actions to improve page load performance" this fixes the problem. Thanks for your help and I hope that this can help other people with this problem.

Similar Messages

Browsers Beachballing when loading pages.

I've been having a serious issue lately: my browsers have been hanging when trying to load pages. Safari is the worst culprit (in fact most of the time I have to force quit the application) but even Firefox is bad on occassion.
It happens sometimes when opening a new tab, and sometimes when just launching the browser. I have no idea what could be causing the problem. Generally it loads a little bit/all the page then beachballs for a good minute or so. Sometimes moving into another application and back will help but not always.
I've run all the system updates but doesn't seem like that's fixed it.
I've uninstalled all the plugins but that doesn't seem to help a whole lot.
Any ideas? Its incredibly frustrating.
Message was edited by: ehmjay

Hello,
*"I've run all the system updates but doesn't seem like that's fixed it."*
Your profile indicates you are running 10.5.2. If that is the case, your system software needs updating.
Try maintenance.
Mac OS X: How to force background maintenance tasks (logs and temporary items)
Is there sufficient drive space?
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Check the hard disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
Carolyn

Flash problems with Mountain Lion - web browsers hang when trying to render flash content

Hi Everyone,
After installing Mountain Lion all my web browsers - including the new Safari - seem to not be able to retrieve web content properly.
For example:
1. Youtube video will not play, hang for a while, then error out
2. Facebook will hang then error out (Safari cannot even get to the Facebook page for some reason)
3. IMDB.com cannot render the page, then errors out.
I've tried uninstalling all browsers, flash players, Java and reinstalling again, yet the same thing keeps happening.
Anyone have any ideas for a solution?
Thanks.

Same problem. Done every thin to fix it . I noticed today that if i login to Youtube y can´t watch videos (some times only once), but if i logout i can watch every video. Can you check on that???
I have reinstalled Flash, delete cokies, cache files, fixed rights, and the same. The problem is the same in Chrome, Safari and Firefox and started just after i upgraded to Mountain Lion.

Web browsers hang when trying to save or load from Finder

It appeared some time ago, but didn't happen so frequently. Now I cannot load from or save to Finder almost never. When Finder opens up in any browser (Chrome, Safari, Mozilla) the browser immediately hangs. Sometimes rebooting of the laptop helps, but not always and only for some short time.

Try uploading a photo to a reply here by placing it on the Desktop and then dragging it to the Reply window. I've been having trouble with Safari not uploading the file if I use the camera icon on various forums and with Firefox crashing if I even attempt to upload a photo. Maybe we can tackle this together.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

Web Intelligence Hangs When a Report is Cancelled

Web Intelligence hangs when a report is cancelled. Has anyone else had this problem and how have you fixed it? I have googled it and can find fixes for it on previous versions but can't find it on our current version. We are on SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version: 14.1.2.1121.

Hi,
I still recommend Patch2.x , also the BICS correction is must-have in long term.
You need to save the BEx query in Designer with property "Allow external acess to Query"
Viewer preferences are set in BILaunchPad settings , not CMC
Java version can have impact - but anything in 1.6.0_x range is fine with IE 7 / 8
You also need to make sure your APS server (that contains the DSLBridge service) is running.
You also need to make sure that your user credentials in the BICS logon string have sufficient SAP Authorizations added to your Role, to be able to read the InfoArea nodes as seen in RSA1 in BW.
You also need to have a compatible BW version: 7.01 (EhP1) SP07 and above. (08 / 09 recommended)
Regards,
H

IPhoto 11 and 10.8.2 Hangs when loading library

Ok.. I have just done my 4th clean install of Mountain Lion in the last 3 months. Due to issues I've manually restored my iPhoto, iTunes, iMovie and Garageband content back to my new clean system and then opened the above mentioned programs.
The problem is that iPhoto will not get past the opening after I choose the iPhoto library.
My test account will open a blank iPhoto library. But the main user account just hangs when loading the library.
So far I've done the following.
Launched with Command and Option and rebuilt the library and used the iphoto library 3rd party tool to rebuild the library.
I've cleaned disk permissions.
I've run Onyx and cleaned the entire system.
I've trashed iPhoto and reinstalled iPhoto from the iPhoto 11 disk and then updated through the App store.
What else can I try? My iPhoto library is 54 Gigs and is all my digital photos of my kids since they were born 10 years ago.

One simple thing you can try is Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

My 64Bit Adobe CS6 hangs when loading a file

My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7. I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it. Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message. Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
I've also done a factory restore followed by a restore from backup and have the same problem.

Safari crashing all the time when loading pages

About two weeks my Safari (3.1) started crashing really a lot, always when loading pages. I am not aware of having installed any new software, and it is really annoying. Any ideas?
Thank you!

Firefox is not as fast as Safari 3.1 but it's not that slow!
If your Safari keeps crashing, or if you are updating Safari (or just have):
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta, and now Safari 3.1. If Safari 3.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 and 3.1 use a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.1.
You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-002. Like all security updates, this requires a restart and a permission repair.
As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed. Moreover:
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Safari in Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Firefox hangs while loading pages.

When loading a new page (not always in a new tab, not always an additional tab or tabs, but it seems to happen more when opening multiple tabs) the little rotating circle will either remain dark and if an attempt is made to reload the location bar changes to new tab, losing the address in the location bar, or the rotating circle will go one way, then reverse, then continue to spin. At the bottom of the page where what is being loaded in a page shows it will hit on one thing (as I'm writing this in Chrome I'm loading a folder of bookmarks I've been loading daily for years that now is a nightmare and pages are stuck at "connected to ajax.googleapis.com," "connected to hell.myfonts.net," "waiting for dt.adsafeproteted.com," "connected to log.pinterest.com," "connected to cdn.syndication.twimg.com," "waiting for api.lanistaads.com," "waiting for www.projectwonderful.com," "transferring data from v4.moatads.com," "waiting for aax.amazon-adsystem.com," "connected to aax.amazon-adsystem.com," and the other three pages are stuck trying resolve the actual URL) and then refuse to go any further. After that the page will sit, unchanging, as best as I can tell forever. I've left a page loading for several hours while working and it was still connecting to googleanalytics when I came back. It does the same in safe mode. Not a single page in the book marked folder is loading, NOT ONE. They're all sitting and spinning either with blank pages or partially loaded. I will reiterate before someone suggests I not load so many pages at once that I've been loading this particular folder full of pages for at least five years and probably longer and it did not do this until the last month.
This has been going on for a while and has made Firefox worthless. It is getting worse. I have read every similar question and none of the answers has made a bit of difference.
I have tried safe mode.
I have refreshed Firefox.
I have uninstalled Firefox and installed the latest version.
I have cleaned my registry.
I have cleaned my cache (which was almost empty anyway).
I have deleted all temporary files that were not in use on my computer.
I have deleted the install folder in Programs(x86) and then reinstalled the latest version (this made everything even worse and resulted in no secured connections being available at all, including mozilla.org giving me not safe connection warnings so now Firefox is even less useful than before) and currently have no add-ons or themes installed.
I have run Spybot, Malwarebytes, Housecall, and several rootkit detectors with no luck.
This computer is less than a year old, is running Windows 8.1 and is up to date. I just installed Firefox v 37.0. When I went to look and see what the version was Firefox can't even seem to resolve its own update URL.
Application Basics
Name: Firefox
Version: 37.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
Report ID: bp-c4fb0dcb-300b-499f-9604-ff2202150402
Submitted: 1 day ago
All Crash Reports
Extensions
Graphics
Adapter Description: Intel(R) HD Graphics
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0156
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 9-16-2013
Driver Version: 10.18.10.3308
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 00000000
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D11 vs_5_0 ps_5_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d 1.1
AzureContentBackend: direct2d 1.1
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150326190726
browser.startup.homepage: http://forecast.weather.gov/MapClick.php?lat=38.24457956399675&lon=-85.76285815797684&site=all&smap=1#.VR8Tv-H0d-8
browser.startup.homepage_override.buildID: 20150326190726
browser.startup.homepage_override.mstone: 37.0
browser.tabs.warnOnOpen: false
dom.mozApps.used: true
extensions.lastAppVersion: 37.0
gfx.direct2d.disabled: true
gfx.direct3d.last_used_feature_level_idx: 0
layers.acceleration.disabled: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1428101019
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1428101009
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.8
Version in use: 4.10.8
NSS
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSMIME
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSSL
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSUTIL
Expected minimum version: 3.17.4
Version in use: 3.17.4
Experimental Features
---------------------

I get an e-mail with go-comics and the ones I want to post links to I'll open in the browser as I read them in the e-mail so I regularly have a dozen tabs open (all the same site) by the time I'm through the e-mail. Every third or fourth page will hang up on something (connecting to or waiting for) sometimes not loading a single image, sometimes loading half the page, sometimes loading everything but the comic (because, hey, why put that as the first thing to load when you've got all these ads and crap to throw at your paying customers?).
At some point a couple of months ago I got some malware associated with trovisearch (I do not know how that got past security and java blocker but it did, probably some hidden crap in something from CNET) that somehow spoofed a page for Housecall and added five or six pieces of malware and adware. I cleaned for two days after and still can't find anything left on the computer even though I've been running scans constantly to try to make Firefox work right. I downloaded and ran a scan using Kaspersky during that time and then uninstalled it. That very well may be the cause of the post-refresh SSL issue.
I have Spybot and Malwarebytes scan logs from the time of the infection if that would help in any way. It doesn't look like there's a way to attach .xml files in this forum, though.
I can also run hijack this and copy and paste if that would help.
I'm currently running Windows Defender and rely on that and Noscript and adblocker plus to keep me isolated from most attacks (I don't have those add-ons re-installed yet). I also run Peerblock because they add malicious sites and known hacking sources (like Chinanet) to what they block as well as all the fake p2p stuff that's constantly pinging the computer. If I'm treading around in perilous waters I run Sandboxie.
Chrome is working as normal but Firefox feels like dial-up or worse right now and without adblocker I might as well be using IE.

Issues when loading pages

Hi all,
I'm experiencing some performance issues when loading a page for the first time. The problem is caused when updating a css file of my own custom theme. When I access a page of the application for the first time, this produces a 404 error but the file truly exists. If I update the page via F5 or I access a different page it loads correctly with times more than acceptable. In contrast, if I update the page via Ctrl+F5 (to clear cache) the same issue occurs.
I performed the same test with another test application with a default theme and working properly.
The configuration I have is Apex 4.1.1 in a Oracle 11.2 and Apex Listener 1.1.4 in a WebLogic server. The file i.war does not pack the images directory directly, this file contains a configuration file which defines a virtual directory, in this way I can modify files on the fly without restarting the listener. If I get this problem and restart the listener everything works right. The configuration file is:
+<weblogic-web-app xmlns="http://www.bea.com/ns/weblogic/weblogic-web-app">+
++
+<context-root>/i</context-root>+
+<virtual-directory-mapping>+
++
+<local-path>/mnt/fs_servicios/apex/datos/usuarios/apex/applications/apex/images</local-path>+
+<url-pattern>*</url-pattern>+
+</virtual-directory-mapping>+
+</weblogic-web-app>+
What could be the cause of the problem?
Edited by: RideTheStorm on Jan 17, 2013 9:57 AM

In the weblogic log appears this entry:
<Jan 17, 2013 10:06:36 AM CET> <Error> <HTTP> <BEA-101019> <[ServletContext@406840767[app:i module:i.war path:/i spec-version:null]] Servlet failed with IOException
java.io.IOException: failed to read '199' bytes from InputStream; clen: -1 remaining: 199 count: 6743
        at weblogic.servlet.internal.ChunkOutput.writeStream(ChunkOutput.java:417)
        at weblogic.servlet.internal.ChunkOutputWrapper.writeStream(ChunkOutputWrapper.java:178)
        at weblogic.servlet.internal.ServletOutputStreamImpl.writeStream(ServletOutputStreamImpl.java:520)
        at weblogic.servlet.internal.ByteRangeHandler.write(ByteRangeHandler.java:103)
        at weblogic.servlet.internal.ByteRangeHandler$SingleByteRangeHandler.sendRangeData(ByteRangeHandler.java:407)
        Truncated. see log file for complete stacktrace
I will talk with the people who manage the server to find a solution for this issue.

Safari slow and freezes when loading pages

Hi I've been having a problem with Safari for the past few months it frequently freezes when loading web pages, sometimes it will eventually load, other times it wont. the blue progress bar in the address bar stops on about 10% with a plain white page it doesn't happen all the time but disturbingly it happens on pages as simple as Google search, not just data heavy sites. other symptoms include having to click links several times to get them to respond and I get the you are not connected to the Internet page when I go to some sites only to try another page from my bookmarks and it will load perfectly.
Any help greatly appreciated its driving me nuts.

I only posted the other post because I hadnt anticipated getting such a quick responce from you , Im on a tight deadline for work and I needed to get this problem sorted a.s.a.p, I didnt think that anybody else would hop onto this discussion Anyway heres the output I get
Last login: Wed May 9 13:18:21 on console
Gareth-Joness-iMac:~ gareth$ kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Gareth-Joness-iMac:~ gareth$ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Sorry, try again.
Password:
com.microsoft.office.licensing.helper
com.adobe.SwitchBoard
Gareth-Joness-iMac:~ gareth$ launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.wacom.pentablet
com.adobe.AAM.Scheduler-1.0
Gareth-Joness-iMac:~ gareth$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
WacomNetscape.plugin
WacomSafari.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
npContributeMac.bundle
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.wacom.pentablet.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
PenTablet.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
com.adobe.SwitchBoard.monitor.plist
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E3CFAA50-1194-4D76-B170-E96 8592213B6.plist
[email protected]list
Library/PreferencePanes:
Gareth-Joness-iMac:~ gareth$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
iTunesHelper
Gareth-Joness-iMac:~ gareth$
Thanks

One https site when loading pages driven by aspx Firefox wants to save as a file; doesn't happen in IE or Chrome.

I have been having problems loading https pages from a bank that I have used without issues for a long time. The bank has recently updated their site and this did co-incide with the problem starting. The issue seems to be related to aspx pages. When I click to go to one of the aspx driven pages Firefox wants to download it as a file. If I do that the saved file comes up as HTML text when loaded. No problems when loading the same pages in IE or Chrome. In addition, the bank's older pages did not have this problem with Firefox Betas.

Thanks, that did the trick, although I had to clear the cookie again after loading the site. Having tte cookie there doesn't seem to bother Chrome or IE, so, is this an issue with the way Firefox deals with this site? I have no problem with other banking sites.

Firefox uses all CPU resources when loading pages with lots of images.

I just installed XP, and when I load pages with a ton of images, say, tumblr, Firefox uses ALL CPU time until it finishes loading.
But because of the slowdown, it takes forever to download all the images.
It's not related to my connection, I've got 15mbit downstream.
I have Win7 on a different partition, and I have never had this problem.
As far as I know, all my drivers and XP are up to date.
I could have an old driver lurking, should I be looking at something specific?
I've tried to find something on Google, but I've not found anything really helpful...

I haven't gotten around to installing antivirus (or anything else, for that matter).
If I watch in Task Manager, Firefox.exe goes to 100% as soon as I load the page.
And no, that guide didn't help much. I don't have any addons or plugins yet, this is a new install.
I got a huge slowdown a bit ago, it's because it was using almost 1.5GB of RAM o_o

Web Browsers hang when loading pages

Similar Messages

Maybe you are looking for