Web Browsers Not Able to Reach Server
Sometimes my browser will not reach a page entirely, or sometimes it'll just not load the style sheets or the images or something. This first started happening when I installed Safari 5. At first the problem only applied to Safari, but now the same problem seems to be appearing in Firefox and Chrome as well. Can anyone help me?
HI,
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Users are having better performance with their browsers using Open DNS / Free - Basic
If you didn't repair disk permissions after the update was installed, it would be beneficial to do that.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Similar Messages
-
All Browsers not able to open any Website while able to Ping all Websites but after restart server web sites are able to open for 5 to 10 minutes only.
Please Suggest me a solution.Hi, we miss some information;
- do you use a proxy ?
- can you provide an ipconfig /all please
- do you use any firewall product that could block the computer on port 80
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it! -
PXE boot problem: guest VM DHCP request packets not able to reach DHCP server
Hi Gurus,
I'm wondering if anyone could help me with this problem. I wanted to install Linux on Oracle VMs using PXE. I set up a DHCP server and the OVM running RHEL6.4 box. The DHCP server worked fine since other PHYSICAL servers could get IPs from this DHCP server. However, DHCP requests from Oracle VMs was not able to reach the DHCP server. So I suspect this is a VM-specific issue.
If I type in "dhcp net0" on gPXE prompt on the OVS machine(sappire), I can see the requests were being sent from the OVS server (sapphire):
gPXE> dhcp net0
DHCP (net0 00:21:f6:00:00:00) .............................................Connection time out (0x4c106035)
Could not configure net0: Connection time out (0x4c106035)
gPXE>
[root@sapphire ~]# tcpdump -i any -n udp dst portrange 67-68
tcpdump: WARNING: Promiscuous mode not supported on the "any" device
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 96 bytes
20:47:25.606400 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:21:f6:00:00:00, length: 387
20:47:25.606549 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:21:f6:00:00:00, length: 387
20:47:25.606559 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:21:f6:00:00:00, length: 387
^C
12 packets captured
14 packets received by filter
0 packets dropped by kernel
But if I snoop the same on the RHEL6.4 server running DHCP server and OVM, no request can be seen:
[root@bluestone Desktop]# tcpdump -i any -n udp dst portrange 67-68
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
^C
0 packets captured
0 packets received by filter
0 packets dropped by kernel
OVS(sapphire) and OVM(bluestone) are located in the same subnet:
[root@bluestone network-scripts]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:14:22:72:7C:27
inet addr:192.168.2.48 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::214:22ff:fe72:7c27/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:106795 errors:0 dropped:0 overruns:0 frame:0
TX packets:122056 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:59173975 (56.4 MiB) TX bytes:25362955 (24.1 MiB)
[root@sapphire ~]# ifconfig -a
10049df2fc Link encap:Ethernet HWaddr 8A:C5:05:83:AF:C9
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:33200 (32.4 KiB) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1A:64:64:DA:64
inet addr:192.168.2.202 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37664 errors:0 dropped:0 overruns:0 frame:0
TX packets:38939 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4537897 (4.3 MiB) TX bytes:23127790 (22.0 MiB)
eth0:0 Link encap:Ethernet HWaddr 00:1A:64:64:DA:64
inet addr:192.168.2.212 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[root@sapphire ~]# brctl show
bridge name bridge id STP enabled interfaces
10049df2fc 8000.8ac50583afc9 yes tap7.0
tap7.1
vif7.0
vif7.1
I turned off iptables and SELinux on the DHCP server, the issue still remained.
Any help will be highly appriciaited.
Thanks in advance,
AlexHi,
- Do you install Oracle VM Server (OVS) on an emulated environment like Oracle VM VirtualBox ? if yes so you can't do it.
- Don't forget to configure the Virtual Machines Network and also to add this network to this Virtual Machine.
I hope this can help you
Best Regards -
how can i activate an ipad that was attached to someones icloud account. I am not able to reach the person to have them release it
You can't, i'm sorry. What you're running into is the activation lock and it requires that the original owner release it with their apple ID before you can set it up.
-
WHCK - Not able to access Server from client machine
Hi,
Server is running in : \\testserver
Domain : ns.local
Client : testclient
Test Name : TDI filters and LSPs are not allowed
When the above test is run from the server side, Test fails with the following error:
Cause : Failed to Start the Task
Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
Failure : Failed to Start the Task "Copy TAEF Binaries"
Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
From WttEa.log , it displays "The network path was not found".
CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1
CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
CRunManager::UserName : DTMShareUser
CRunManager::Domain : TESTSERVER
CRunManager::Password : Server2008,WTT5326ShareUser
Build No Greater than 4000. This is a Windows Vista Machine
Single User TS Enabled
Comparing TESTSERVER testclient.ns.local 10
Logon Netonly
GetUserToken : Returns 0
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
Retrying the log location creation 10 more times
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
What could be the problem ??? What steps need to be done or checked further to proceed ??
Could you please help why the client is not able to access Server ???
Thanks.
Regards,
Pradeep VRHi,
Reason for this failure is that the test executable is not present in the HLK controller.
It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
If you face the problem in current build also, then please log a bug to Microsoft.
Thanks,
Arpo -
Dispatcher Died after not able to reach message server
Hi Gurus,
My Dispatcher is not able to connect to MS. Please note I am using windows/oracle. After som time disp+work died. Here I am posting latest dev_disp log. Please suggest.
regards-JASWANT
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC5
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 3096
Mon Apr 27 11:01:58 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3096) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 27 11:02:03 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >hpnwecc_EC5_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05970040, size: 4930904)
DpShMCreate: allocated sys_adm at 05970040
DpShMCreate: allocated wp_adm at 05972090
DpShMCreate: allocated tm_adm_list at 05976980
DpShMCreate: allocated tm_adm at 059769B0
DpShMCreate: allocated wp_ca_adm at 05D894B0
DpShMCreate: allocated appc_ca_adm at 05D8F270
DpShMCreate: allocated comm_adm at 05D911B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05E12070
DpShMCreate: allocated gw_adm at 05E120B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05E120E0
DpShMCreate: allocated wall_adm at 05E120E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Mon Apr 27 11:02:04 2009
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 755 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5940
argv[0] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC5
argv[7] = -DSAPMYNAME=hpnwecc_EC5_00
argv[8] = -DSAPPROFILE=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
Continued...........continued
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1720]
ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1721]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Mon Apr 27 11:02:07 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 3 / sock 1500
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3319) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5940)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Apr 27 11:02:44 2009
ERROR => DpHdlDeadWp: W0 (pid 5680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 4888) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4208) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 444) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 5312) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4880) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W6 (pid 6120) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W7 (pid 2604) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W8 (pid 4688) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2636) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 6012) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W11 (pid 2428) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W12 (pid 5256) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:54 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 27 05:32:54 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5680 Ended no 1 0 0
1 DIA 4888 Ended no 1 0 0
2 DIA 4208 Ended no 1 0 0
3 DIA 444 Ended no 1 0 0
4 DIA 5312 Ended no 1 0 0
5 DIA 4880 Ended no 1 0 0
6 UPD 6120 Ended no 1 0 0
7 ENQ 2604 Ended no 1 0 0
8 BTC 4688 Ended no 1 0 0
9 BTC 2636 Ended no 1 0 0
10 BTC 6012 Ended no 1 0 0
11 SPO 2428 Ended no 1 0 0
12 UP2 5256 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 27 05:32:54 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Mon Apr 27 05:32:54 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , tr-12-05, 11:02:30, M0, W-1, , 1/0
RM-T14, U15, , tr-12-08, 11:02:31, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Apr 27 05:32:54 2009
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:59 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >hpnwecc_EC5_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4884) (SOFT_KILL)
Stop icman
killing process (4708) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1500 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1500 (pos=2)
SiSelNRemove: removed sock 1500
NiSelIRemove: removed hdl 3
DpDelSocketInfo: del info for socket 3 (type=3)
NiICloseHandle: shutdown and close hdl 3 / sock 1500
NiBufIClose: clear extension for hdl 3
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 187 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 14 elems in tmadm_inuse_list
send SHUTDOWN to REM TM 14
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T14
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T14 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1452 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1452
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1452
NiBufIClose: clear extension for hdl 5
dp_tm_adm[14].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 14
DpListInsert: insert elem 14 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 14 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4884 HANDLE:1568)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:00 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4884 HANDLE:1568)
wait for end of icman
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:01 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:02 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:03 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:04 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:05 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:06 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4708 HANDLE:1572)
[DpProcDied] Process died (PID:5940 HANDLE:1552)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3096) [dpxxdisp.c 10421]
Good Bye ..... -
MDM SP4 Web Services Not able to Connect
Hello,
I am trying to use standard MDM SP4 webservice.
I deployed MDM_WEB_SERVICES_550.sca and also did required setting in visual composer as mentioned in the follwing blog.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a97ac6-c884-2910-c6ad-bae0de29e67b">MDM SP4 Web Services.</a>
But,When I am testing <b>mdmsearch</b> webservice with correct repository,port,mdm server details with other required parametes as mentioned in the blog. I am getting the follwing error.
Problem while connecting to MDM repository "MyRep" on server "myserver" at port "2311". Maybe the Repository-Information has not been set correctly at the requested query!
To confirm the connection parameters,I wrote sample java program using mdm java api and run from the was server and i am able to connect to the same.
Is there other sca files need to be deployed on WAS to work with sp4 standard web services.Hello,
Yes..I changed the properties file in VC as mentioned in the blog. (I also mailed u the vc screen shot)
I also added read_only user in mdm respective repository.
But,not able to get resultset from mdmsearch webservice.
Please help me..
Regards,
Raju. -
Not able to access Server Behaviours on Windows 8.1
I moved my Dreamweaver from a Windows Vista Computer to a Windows 7 Computer and the to Windows 8.1.
Windows 7 and Windows 8.1 are 64 bit
I am using ASP and MySQL
On the Windows 7 computer if I create a new ASP page, the Server Behaviour Plus Button is active, but on the Windows 8 computer the plus buttton is greyed out when I create a new page and I see the message to create a site for the file, chose a document type and set up a testing server.
If I open an existing ASP page which has a Recordset already created, then the Plus Button is active and I can add a new recordset
But if I want to add a parameter when creating a link on a form to submit, I am not able to create a parameter and am told to create a site for the file, chose a document type and set up a testing server.
I cannot find a reason why on Windows 8.1 there is a problem while on Wondows 7 there is no problem
To the best of my knowledge both computers are set up in the same way for Dreamweaver
I have tried creating a new site with new pages, but that does not solve the problem
Any suggestions would be appreciatedHi,
Are you able to access the NAS via ip address? What is the result?
The connection can also be blocked by firewall or anti-virus installed in your system, so I suggest you temporarily disable firewall\anti-virus software, and check if issue persists.
Meanwhile, you can try the following registry settings and see the result, launch registry editor, locate to
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/Policies/System
create a new DWORD entry with the name EnableLinkedConnections and value 1, then restart PC
Yolanda Zhu
TechNet Community Support -
Web application not able to connect to Oracle 10g
I have been facing an issue with my Web application past 2 days wherein
I am not able to connect to oracle database. The error is receive when I compile my project : OCIEnvCreate failed with return code -1 but error message text was not available. I have defined my connection in web.config and calling it using a connection string
Details: os : window7 (64bit) .NET framework 4 Oracle 10g 32 bit can you please help me and provide me with a sHi,
My Question is related to Microsoft visual studio (.Net Framework).
Issue: My Application build in Asp.Net is not able to connect to Oracle 10g database (32 bit). My OS is 64 bit in which my visual studio2010 is Installed.
Thanks
Error:
OCIEnvCreate failed with return code -1 but error message text was not available.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: OCIEnvCreate failed with return code -1 but error message text was not available.
Source Error:
Line 28:
Line 29: OracleConnection con = new OracleConnection(connStr);
Line 30: con.Open();
Line 31: str = "select count(1) from ITS_INCIDENT";
Line 32: com = new OracleCommand(str, con); -
Hi,
I just downloaded WebLogic 10.0 and installed in my system. But I am not able to start the server, due to the following exception
<Jun 22, 2009 5:17:15 PM GMT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engi
rviceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException.
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(Lweblogic.management.security.RealmMBean;)V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms()V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(Unknown Source)
Truncated. see log file for complete stacktrace
com.bea.common.engine.ServiceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:369)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:319)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:261)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(Ljava.lang.String;Ljava.lang.String;Lcom.bea.common.engine.Services;)V(Unknown Source)
Truncated. see log file for complete stacktrace
javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:549)
at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:157)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:367)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:319)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:261)
Truncated. see log file for complete stacktrace
java.lang.reflect.InvocationTargetException
at jrockit.reflect.InitialMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:534)
at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:157)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:367)
Truncated. see log file for complete stacktrace
<1|true|0.9.7> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "org.apache.openjpa.abstrac
e.AbstractStoreBrokerFactory". See the nested exception for details.
at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)
at kodo.jdo.PersistenceManagerFactoryImpl.getPersistenceManagerFactory(PersistenceManagerFactoryImpl.java:41)
at jrockit.reflect.InitialMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:534)
Truncated. see log file for complete stacktrace
java.lang.RuntimeException: There were errors initializing your configuration: com.solarmetric.license.LicenseException: Your license key "376D-896F-8B43-BE3D-3D00" expired on
5/07 12:00 AM". Please contact [email protected] for purchase or evaluation information.
at com.solarmetric.license.License.assertNotExpired(License.java:232)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:40)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:279)
at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1408)
at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:544)
at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:494)
at org.apache.openjpa.abstractstore.AbstractStoreBrokerFactory.getInstance(AbstractStoreBrokerFactory.java:77)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:117)
at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:85)
at kodo.jdo.PersistenceManagerFactoryImpl.getPersistenceManagerFactory(PersistenceManagerFactoryImpl.java:41)
at jrockit.reflect.InitialMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:534)
at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:157)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:367)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:319)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:261)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(Ljava.lang.String;Ljava.lang.String;Lcom.bea.common.engine.Services;)V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(Lweblogic.management.security.RealmMBean;)V(Unknown Source)
at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:293)
at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1408)
at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:544)
at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:494)
at org.apache.openjpa.abstractstore.AbstractStoreBrokerFactory.getInstance(AbstractStoreBrokerFactory.java:77)
Truncated. see log file for complete stacktrace
>
<Jun 22, 2009 5:17:16 PM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 22, 2009 5:17:16 PM GMT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization()V(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
<Jun 22, 2009 5:17:16 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jun 22, 2009 5:17:16 PM GMT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jun 22, 2009 5:17:16 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
C:\bea10\WLSERV~1.0\common\lib>
Please advice on how to start this WebLogic Server.
Thanks in advamce
ViswaHave yoy configured any domain ?
If not which domain you are starting ?
Regards,
Krikar -
Web browsers not loading webpages
Overnight, a couple of days ago, my web browsers (Safari and Chrome) both stopped loading webpages. When I click on a link, I get a blank page. But when I am logged as a guest or browse through Vmware's windows I can still browse normally. Thanks for helping to fix this.
Thank you Carolyn,
I've got Sophos installed from long time ago. That's the only antivirus that is installed.
Checking in firewall settings didn't help I think, cause even after desactivating the firewall temporaly didn't fix the issue in both web browsers.
This issue is not discussed in Mac malware guide.
Another detail, is that some web content will load like this discussion group or google search. But If I click on any item from google search, the page won't load. -
Why are web browsers not controlled by restrictions?
When you turn off Safari in restrictions it apparently doesn't really matter since most apps have built in web browsers (really, as I understand it they are calling mobile safari) but why doesn't Apple just have that restricted when Safari the "app" is turned off? It makes it silly to even allow Safari to be turned off if it isn't a system wide event. I can't see this as a major problem to remedy since I assume most app developers are calling a specific API, so just have that API restricted so parental controls actually work.
For instance if you turn on restrictions but have Evernote installed (or Twitter, or just about any other app) there is usually a way to get to a web page via the about screens because they include mobile safari. I understand not off loading these things to Safari (well in Twitter's case, Evernote's was a bit sloppy) but again this should be controlled inside restrictions via turning off mobile Safari.
Thanks,You are only talking to users here, If you want to make a suggestion to Apple then go to: http://www.apple.com/feedback/iphone.html
-
Not able to start server using wlst in windows
hi everyone,
i am trying to start the weblogic 10.3 server thru wlst using the command
startServer('AdminServer_name','Domain_Name',"............
first it used to give an error saying that it is not able get the encrypted username and password from the boot.properties file.
then i tried copy pasting the username and passwd in the same command and it gives me a error saying
wlst could not start a new jvm for the server process, this might happen if you have provided illegal jvmArgs or the JVM picked up any illegal JVM_OPTIONS from your path.
if i mention the JVM parameters same as obtained from the help('startServer') command parameters. it says
Traceback (innermost last):
File "(console)", line 1, in?
File "(iostream)", line 398 , in startServer
TypeError: startSvr(): 10th arg cant be coerced to int.
i am desperately trying to get through this error
please help....
thank you,
RoopAnnoying syntax bug:
60000 works
'60000' doesn't
wls:/offline> startServer( 'AdminServer', 'base_domain', 't3://host:7009', 'weblogic', '****'', '/opt/oracle/bea/user_projects/domains/base_domain', 'true', '60000' )
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 398, in startServer
TypeError: startSvr(): 10th arg can't be coerced to int
wls:/offline> startServer( 'AdminServer', 'base_domain', 't3://host:7009', 'weblogic', '***', '/opt/oracle/bea/user_projects/domains/base_domain', 'true', 60000 )
Starting weblogic server ...
WLST-WLS-1253908409262: <Sep 25, 2009 3:53:29 PM EDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath: -
Input Enabled Query - Web Template - Not able to change the key figure.
Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
SenthilHI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi. -
IPSec Tunnel established but not able to reach remote Local subnet
Hi,
We established IPsec Tunnel. It was active but I found following issue. Please give your suggestion to troubleshoot it.
1. 192.168.50.0/24 (Site A) able to reach 192.168.90.0/24. (Site B) and Vice Versa
2. 192.168.30.0/24 (Site C) able to reach 192.168.50.0/24 (Site A) but not vice versa.
3. 192.168.10.0/24, 155.220.21.175 (Site A) reaches up to 192.168.90.0/24 (Site B) and vice versa. but not reach to 192.168.50.0/24 (Site A)
Want to access 192.168.30.0/24, 192.168.10.0/24, 155.220.21.175 (Site C) from 192.168.50.0/24 (Site A)
Additionally Tunnel only established if active traffice send from site B.
Thanks & Rgds,
Dhaval DikshitThanks, Punit. Additionalily I found following error, it might reach us to nearer to solution. Please suggest if any suggetion.
When I'm doing packet tracer from site B I got following massage.
ASA# packet-trace input outside tcp 192.168.50.220 2000 155.220.21.175 21 detail
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc959c928, priority=1, domain=permit, deny=false
hits=143495595, user_data=0x0, cs_id=0x0, l3_type=0x8
src mac=0000.0000.0000, mask=0000.0000.0000
dst mac=0000.0000.0000, mask=0100.0000.0000
Phase: 2
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 155.220.21.175 255.255.255.255 inside
Phase: 3
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group outside_access_in in interface outside
access-list outside_access_in extended permit ip object-group Tas_Tunnel host 155.220.21.175 log
object-group network Tas_Tunnel
network-object host 192.168.50.50
network-object host 192.168.50.65
network-object host 192.168.50.220
Additional Information:
Forward Flow based lookup yields rule:
in id=0xca246310, priority=12, domain=permit, deny=false
hits=1, user_data=0xc793bcc0, cs_id=0x0, flags=0x0, protocol=0
src ip=192.168.50.220, mask=255.255.255.255, port=0
dst ip=155.220.21.175, mask=255.255.255.255, port=0, dscp=0x0
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc959f4d8, priority=0, domain=inspect-ip-options, deny=true
hits=3443418, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 5
Type: INSPECT
Subtype: inspect-ftp
Result: ALLOW
Config:
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect ftp
service-policy global_policy global
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc962fa60, priority=70, domain=inspect-ftp, deny=false
hits=11, user_data=0xc962f8b0, cs_id=0x0, use_real_addr, flags=0x0, protocol=6
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=21, dscp=0x0
Phase: 6
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc9f1c290, priority=12, domain=ipsec-tunnel-flow, deny=true
hits=167708, user_data=0x0, cs_id=0x0, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 7
Type: NAT-EXEMPT
Subtype: rpf-check
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc965a700, priority=6, domain=nat-exempt-reverse, deny=false
hits=2, user_data=0xc965a490, cs_id=0x0, use_real_addr, flags=0x0, protocol=0
src ip=192.168.50.220, mask=255.255.255.255, port=0
dst ip=155.220.21.175, mask=255.255.255.255, port=0, dscp=0x0
Phase: 8
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Reverse Flow based lookup yields rule:
in id=0xc95ea328, priority=0, domain=inspect-ip-options, deny=true
hits=17273465, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 9
Type: VPN
Subtype: encrypt
Result: DROP
Config:
Additional Information:
Reverse Flow based lookup yields rule:
out id=0xca2f4c98, priority=70, domain=encrypt, deny=false
hits=2, user_data=0x0, cs_id=0xc9dd8d90, reverse, flags=0x0, protocol=0
src ip=155.220.21.175, mask=255.255.255.255, port=0
dst ip=192.168.50.192, mask=255.255.255.192, port=0, dscp=0x0
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
Thanks & Rgrds,
Dhaval Dikshit
Maybe you are looking for
-
TimeCapsule router104bits encryption connection issues with laptop
Hi, we have set up a wep-104 encrypted office Wifi ( TimeCapsule router) N-band network, WPA2-PSK (AES encryption). Although I set it up as WPA2-PSK, on a wifi sniffer I ran its identified as wep-104 for some reason (104bits, that is). This wifi has
-
Is anyone else having problems editing XQuery maps in WL Workshop? I have created my own schema and then use it to map the input parameters to internal Java types for a Web Service. The XQuery editor works fine the first time - that is I bring up the
-
Query - Error in Unit of Measure
Hi SDN Gurus, I have a few reports with the following situations: 1. I see 'ERR' below the column header on a key figure 2. Or 'ERROR' below the column header on a key figure 3. Or 'ERROR" after a value in a key figures specific to a PO/Item transact
-
URLs not matching the mappings I set in web.xml
Below is what I observe, I would have expected the URL to match all 3 but it only matches for the first one , any ideas? Web.xml contains <filter> <filter-name>MyFilter</filter-name> <filter-class>HWfilter</filter-class> </filter> <filter-m
-
Progress bars objects not serializable message iat application runtime
I am getting errors for the beans that have to do with progress bars. It says these objects are not serializable. When I try to implement serializable I still get that error. What do I need to do? I have 3 progress bars in view scope. SEVERE: ADFc: S