Web cam freezes after few min in yahoo messenger

i am having apple macbook in yahoo messneger when i connect with the other party, my picture freezes (with the last image in the window), but I can see and hear the other person im talking with. They can also still hear me, but with a frozen picture. I hang up every few minutes and call them back until it freezes again.please help me how to solve this

I am not getting any solutions of my questions......

Similar Messages

My web cam freezes after few min in yahoo messenger

i am having apple macbook in yahoo messneger when i connect with the other party, my picture freezes (with the last image in the window), but I can see and hear the other person im talking with. They can also still hear me, but with a frozen picture. I hang up every few minutes and call them back until it freezes again.please help me how to solve this

I am not getting any solutions of my questions......

Freezes after few mins. + how to enable Turobo mode/Ultra-Turbo

hello,
here's my system spec :
MSI 875P NEO-FIS2R
Intel PIV 2.6 C Ghz FSB800 (Ht enabled)
2x256 MB DDR400
Maxtor 80 GB S-ATA 150
MSI Starforce FX 5900 Ultra 256 DDR
CD-RW 52x32x52
i have just OC'ed my CPU from 2.6 to 2.8 the default settings were : 203 x 13.0
i have OC'ed the FSB to 215, so now it's 215 x 13.0. i've also tried 231 x 13.0 to have 3.0 Ghz, but that didn't work, i disconnected everything, took out the battery for 15 mins., replaced it and booted again, and everything was normal again. (back at 2.6 Ghz). but i also noticed that i lost all my BIOS settings... . so i just changed everything that i still could remember and turned back to 215 fsb instead off the 231... . now here's the prob : my system runs just fine with the 2.8 Ghz(OC'ed), i have ran some heavy benchmarks and it's all fine and stable, but sometimes my system just freezes, doing nothign, only the fans keep spinning and my monitor just hangs, not black, but with the last image...my question is : does this happen beacuse i OC'ed it or have i forgot to change anything in the BIOS ?? so, is it BIOS-related or OC-related ?
second question : how do i enable the Turbo mode or Ultra-Turbo ?
greetz

Yes you have to first make sure that you take it nice and easy when you OC, Go up in small steps and stay there for a while, play a game run a benchmark, whatever....You just want to make sure that your PC remains stable and Most important runs COOL ......The one thing that you must change in your BIOS is the DRAM(VDIMM) voltage to 2.7 Volts...That will Most likely stop your Freez-ups....And in order to enable Turbo or Ultra-Turbo....It is on the Frequency and voltage Page at the Top.....These settings are going to tighten up your Memory Timings, so you should start with a Non-Overclocked FSB, And try to enable Fast, or Turbo.....You should do a search on these Subjects in the Forum, as there are Quite a Few......Just remember to go slow and not get greedy, or you might harm your System ...............Sean REILLY875

TS3367 Facetime and skype freezes after few minutes

I have Ipad2 with ISO 5.1.1 over the last one months face time and skype freezes after few min, I reintaslled skyped. but no luck , Before every thing worked fine. I synchronised with itune and updated still no luck. Can any one helps me please. I tried to use to contact USA , CANADA , PAK no luck

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

T400 downgraded from Vista to XP resulting in system freeze after 10 min activity

Hi,
I just purchased a T400 and have gone through the process of (re)grading the OS from Vista Business to XP. From the moment the setup dialogue for XP started (machine name, date, users etc), the whole systems freezes after working the machine for around 10-15 min. First, I suspected it to be a mouse freeze, but I get no reponse from neither the keyboard nor mouse (not sure if it is a complete system freeze or to do with mouse/keyboard drivers). Even the clock in the bottom right corner stops running.
To get the system going I need to force the system to reboot using the power on/off button.
The XP restore disc I used came from Lenovo with the computer, and I have followed the instructions by point. Do any of you recognize this problem? And more importantly, know how to deal with it
Message Edited by Missmostly on 10-16-2008 06:28 AM
Message Edited by Missmostly on 10-16-2008 08:56 AM

Hi,
I posted a message on the forum 5 days ago, and got no replies. I agree the problem description might be a bit vague, so here we go again:
I recently purchased a T400 (model 2765, 21g) with the XP downgrade option (the MS Windows XP Conversion Kit containing 2 CD's: Lenovo's Rescue & Recovery plate + XP product recovery plate with SP2). During the installation of XP (the end part where you set up your user) the computer freezes (no response from keyboard). I power the machine off and on again, and the installation continues as it were. I finish the installation and the computer is set. After additional 10 min the computer freezes again in the same style.
I imagine it to be a powermanagement disagreement between MS system and Lenovos powermanagement system, and set every parameter to be always ON and full performance ( I am running on AC). This time the freeze doesn't happen for an hour. I then begin to reinstall the powermanagement drivers and the general drivers for this particular model running XP (from Lenovos drivers Matrix), and now I am looking at two hour before each freeze. That is if I don't plug in any external hard drives (then the system can crash within 15 min or an hour), and we turn a blind eye to the occational freeze after 10 min on the first boot of the day .
At some point I suspected there to be a conflict with the existing SATA drivers that I also have reinstalled for the occation. Still the system is NOT stable.
And the frustrating thing is that I have no clue why. The sympthom is always the same, complete screen freeze ( I do not know if the system is active behind (no hard drive running)), that can only be cured with a forced boot.
If any of you reconize this, please assist me to a solution. I have by now installed all programs to my liking including all MS updates (SP3 etc), and hope there is a way to get to the core without a complete reinstall (or worse, return to the realm of Vista)

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

How to install web cam in my man mini?

Hi,
I have added usb external its type it has 4pins and I added an ordinary usb webcam, how can i used this in my yahoo messenger? If I'll start my web cam in ym it says no camara connected.
Any help pls?
Thanks.
Arnel

AndyO
You are absolutely correct - iSights are expensive (here in the UK they are about £100) Using a camcorder is a good solution for occassional use except that they have the annoying habit of powering down at unexpected times when they are not actually recording. On the plus side they tend to have better lenses than even the iSight so work better in low light level indoors. There are also reports of regular use damaging the recording heads through spinning on a tape that is not moving. Not all camcorders now have firewire - a large number seem to only have USB.
There are some USB webcams that claim to work with Macs - not many - my understanding though is that they don't work with iChat only with Yahoo. This might also be the case with the drivers available at the site in my previous post.
At the end of the day individuals have to decide how much use they will make of a webcam and on which system then look at what is available or what they already have. The important thing is to do some homework before spending any money and check that new hardware will work with a mac and for what purposes.
While I agree that the iSight is seriously overpriced it is the best solution if starting from scratch as they are well designed, work flawlessly with a Mac and there are quite a few other applications that can use it too - iStopMotion, Delicious Library etc.
Me - in this case I'd keep checking out the drivers before spending anymore money.

Dv4-1275mx freeze for few mins and disk 100% highest active time.

           I bought a dv4-1275mx in june and about a week ago, my laptop started to freeze for few minutes and come back.In that time, i didn't do anything and when i checked Resource Monitor (already opened), i saw 100% in Highest Active time in Disk with small data read. This happened several times and when i checked the events, i found following,
Error    6/23/2009 10:08:42 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 10:01:48 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Warning    6/23/2009 9:52:40 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb"" at offset 2482176 (0x000000000025e000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 1 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 84 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
Warning    6/23/2009 9:51:15 PM    ESENT    510    Performance    "Windows (500) Windows: A request to write to the file ""C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb"" at offset 2523136 (0x0000000000268000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. In addition, 0 other I/O requests to this file have also taken an abnormally long time to be serviced since the last message regarding this problem was posted 5515 seconds ago. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem."
Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
Error    6/23/2009 9:49:06 PM    atapi    11    None    The driver detected a controller error on \Device\Ide\IdePort0.
           In yesterday, I got and error message after windows start saying there is a problem in svchost module.Therefore i restart my laptop and then i didn't get any error messages.Then i tried to start firefox after about 5 mins and got a error message saying it stopped by data execution prevention.After about 1 min, i got a message saying windows will restart in 1 min and in restart, it did a checkdisk.After that i didn't got any error messages but i couldn't open firefox, therefore i installed it again and i found following events.
Warning    6/29/2009 7:26:35 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Warning    6/29/2009 7:26:01 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Warning    6/29/2009 7:25:49 PM    Ntfs    130    None    The file system structure on volume C: has now been repaired.
Error    6/29/2009 7:25:02 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
The system cannot find the file specified."
Error    6/29/2009 7:25:02 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    4001    None    "WLAN AutoConfig service has successfully stopped.
Warning    6/29/2009 7:23:51 PM    Microsoft-Windows-WLAN-AutoConfig    10002    None    "WLAN Extensibility Module has stopped.
Module Path: C:\Windows\System32\bcmihvsrv64.dll
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Profiles> failed a notification event.
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6000    None    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event.
Warning    6/29/2009 7:23:49 PM    Microsoft-Windows-Winlogon    6001    None    The winlogon notification subscriber <Sens> failed a notification event.
Error    6/29/2009 7:23:47 PM    Microsoft-Windows-EventSystem    4621    Event System    The COM+ Event System could not remove the EventSystem.EventSubscription object {CEB8B221-89C5-41A8-98CE-79B413BF150B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The HRESULT was 80070005.
Error    6/29/2009 7:22:41 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Error    6/29/2009 7:19:31 PM    Service Control Manager    7032    None    "The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error:
An instance of the service is already running."
Error    6/29/2009 7:19:31 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0xb98, application start time 0x01c9f8c04759c999.
Error    6/29/2009 7:18:27 PM    Microsoft-Windows-WMI    10    None    "Event filter with query ""SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA ""Win32_Processor"" AND TargetInstance.LoadPercentage > 99"" could not be reactivated in namespace ""//./root/CIMV2"" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X xD Host Controller' (PCI\VEN_197B&DEV_2384&SUBSYS_30FB103C&REV_00\4&2a995034&0&0428) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X MS Host Controller' (PCI\VEN_197B&DEV_2383&SUBSYS_30FB103C&REV_00\4&2a995034&0&0328) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD Host Controller' (PCI\VEN_197B&DEV_2381&SUBSYS_30FB103C&REV_00\4&2a995034&0&0228) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:40 PM    PlugPlayManager    12    None    The device 'JMB38X SD/MMC Host Controller' (PCI\VEN_197B&DEV_2382&SUBSYS_30FB103C&REV_00\4&2a995034&0&0028) disappeared from the system without first being prepared for removal.
Error    6/29/2009 7:17:27 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x0000000000002339, process id 0xff8, application start time 0x01c9f8c023973749.
Error    6/29/2009 7:16:26 PM    SecurityCenter    6    None    The Windows Security Center Service was unable to load instances of AntiSpywareProduct from WMI.
Error    6/29/2009 7:16:20 PM    Application Error    1000    (100)    Faulting application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47919291, faulting module bitsigd.dll, version 7.0.6002.18005, time stamp 0x49e040c9, exception code 0xc0000005, fault offset 0x000000000000232c, process id 0x1c4, application start time 0x01c9f8bf81c900ad.
Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The Norton Internet Security service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
Error    6/29/2009 7:14:34 PM    Service Control Manager    7009    None    A timeout was reached (30000 milliseconds) while waiting for the Norton Internet Security service to connect.
Error    6/29/2009 7:14:34 PM    Service Control Manager    7000    None    "The GSRestartSvc service failed to start due to the following error:
The system cannot find the file specified."
I can attach Full events if want. Is this problem comes due to an hardware or OS error? Pls help.
Thanks.

I own two of the dv4-1275mx laptops. Both machines were purchased around June of 2009 from Best Buy, and both machines are doing the same thing as what has been described here. It appears that this model has a flaw, or certain production runs have this flaw. I have done an exhaustive amount of research about this problem and know quite a bit about it.
But, good luck getting HP's Customer No-Service department to actually fix the problem. If you try to get them to fix it, you are about to be taken for quite a ride. They have been absolutely no help in diagnosing the problem, and I am still trying to get them to acknowledge and fix the problem with these laptops.
The problem is with the hard disk controller. It happens both with the built-in hard disk drive and with an external disk drive. It occurs whenever you place a significant load on the disk controller. When the problem occurs, the machine will lock up for 60 seconds at a time. Eventually, the driver times out, resets the disk, and drive activity continues until it happens again.
Normally, the problem is very intermittent because normal usage of the machine doesn't always trigger this problem. However, I have been able to replicate the problem consistently using a backup program called Macrium Reflect (free edition). If I use Macrium Reflect to back up or restore the hard disk image using an external disk drive plugged into the eSATA port, then the ATAPI errors in the log appear immediately after it begins copying data. Eventually, the backup will fail.
The worst part about this is the data corruption. If the lock-up condition occurs when a disk write is happening, then the data being written will get corrupted and you will lose data. I have had disks that have gradually gotten so corrupted that they won't boot anymore. I have spent a countless number of hours backing up, restoring, and attempting to use the machine despite these problems.
After doing further research and testing, it appears that this type of problem is not uncommon to the AMD M780G / ATI Radeon 3200 chipset that these laptops use. If you search the Internet for this type of error, you will find a number of HP and Non-HP customers complaining about this same issue with this chipset on different machines. This leads me to believe that the problem might be with the chipset itself.
I have attempted to find a software remedy to the problem with no success. This included trying all of the following:
- Trying Windows Vista 64 with various configurations of service packs and updates.
- Using the Microsoft AHCI driver and the ATI-supplied AHCI driver for the Radeon 3200 series
- Using different BIOS revisions
- Trying to find a magic combination of AHCI driver and BIOS revision that would work
- Trying various settings for disk write caching
- Turning of DMA on the controller
- Uninstalling every piece of HP-supplied software that I could think of that might have even the slightest possibility of interfering with the hard disk controller
None of this worked. Eventually, I concluded that this is a hardware problem that isn't going to get fixed through software.
Sadly, after doing all of this research, HP has not been helpful with getting this problem fixed. In the past, I have owned laptops from Dell and Toshiba, and while I know that no manufacturer is perfect, I have not had many issues getting prompt and reliable service from either of those two companies when I needed it. This is the first time I have purchased an HP laptop. And after the customer no-service experiences I have had, it is likely to be the last time I purchase an HP laptop.
HP's technical support seems to think that re-imaging the drive to reset the machine to factory defaults cures all problems. Over the phone, they have made me do this a couple of times, insisting that the problem is a result of a virus or something I installed on my machine.
Recently, I sent both of my laptops to them for service. To assist them, I included the details of all of the research that I had done. I gave them copies of this information both electronically, and included inside the box with the laptop. The information had details on the steps that I tried, and links to websites documenting problems with the M780G chipset. It also had details on how to replicate the problem with Macrium Reflect. I even re-imaged the machine back to the factory image, and installed Macrium Reflect for their convenience. And what did HP's service department do? They re-imaged the hard drive again and sent it back to me without even bothering to run my test! This is just absolutely moronic. Either the service technician can't read, or the service technician just doesn't care about fixing customer problems!
My complaints about HP's service are as follows:
There is no sense of urgency about fixing problems. I have been enduring this issue for 9 months now. But no one seems to care.
It takes forever for them to turn around machines in their service department. With Dell, I used to have a working laptop in my hands in 5 days, tops. What's worse is that they ship the packages via FedEx Ground with signature confirmation. (If you work a normal day job, good luck trying to get your package from FedEx Ground, which is only open when I am at work.)
The telephone and online support personnel often don't listen to you, and the details of problems don't ever seem to be recorded anywhere. I have had to explain this problem over and over for various people who seemed almost completely ignorant about the problems I have been experiencing.
The technicians are not competent, even when you tell them what needs to be fixed.
As far as I am concerned, HP has not been honoring the warranty on my machines. This is has been frustrating beyond words. I am at the point where I just want two new laptops without this chipset, but I seriously doubt I will ever get that. To all of you who are experiencing the same issue as I am, I wish you the best of luck in getting HP to resolve this problem--you are going to need it!

Freezing after 20 min of use.

I use this Macbook Pro 2011 daily with 10.8.2 and with no real changes to speak of (ie installing software) i've started experiencing freezes after about 30 min of use.
Programs start becoming unresponsive
Beachball appears.
System freezes until restart.
No crash log as it doesn't actually crash just freezes.
I checked the log and saw that a geek tool couldn't find a file so i shut that down and restarted in case it was the cause. It happened again though and i copied this as the last few messages before i had to restart.
if anyone can shed light on what's suddenly causing this it would be greatly appreciated.
2012-12-10 1:41:26.436 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x11-10.0.1.18:0!
2012-12-10 1:42:49.052 PM mdworker[641]: Unable to talk to lsboxd
2012-12-10 1:42:49.061 PM mdworker[642]: Unable to talk to lsboxd
2012-12-10 1:42:49.136 PM sandboxd[643]: ([641]) mdworker(641) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.146 PM sandboxd[643]: ([642]) mdworker(642) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.000 PM kernel[0]: Sandbox: sandboxd(643) deny mach-lookup com.apple.coresymbolicationd
2012-12-10 1:43:46.850 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x12-10.0.1.18:0!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Can I use my iPhone as a web cam for my mac mini?

Just purchased my mac mini and I need a good web cam. Seems I should be able to use my iphone

There is an app (https://itunes.apple.com/us/app/iwebcamera/id369617568?mt=8) that can do what you want. But, unfortunately only suports OSX Lion, Snow Leopard and Leopard (suport info).
This other app (https://itunes.apple.com/ca/app/webcamera/id348150234?mt=8) didn't say the exact OS X compatibility...

Web Camera compatible with Mac mini

Could someone recommend a web camera that is compatible with the Mac mini. I bought a Dynex DX-DTCAM that said it works with Mac's but it doesn't. Any help is much appreciated.

Welcome to Apple Discussions!
You might find the (brief) thread at http://discussions.apple.com/thread.jspa?threadID=1144969&tstart=0 of some interest in terms of webcam compatibility as a whole.
Not sure about the Dynex you have - it is certainly claimed to be MacOS X compatible, though not exactly which version(s) of MacOS X it works with. Assuming you've installed the drivers with the cam from the CD it came with, you might look at t http://www.dynexproducts.com/pc-459-10-dynex-desktop-web-camera.aspx to see if the Windows and Mac driver download on that page offers a later driver for Macs. The 'readme' file is dated June 2007 and it claims it's for MacOS 10.3 and later.

Qosmio F55 - Freezing after 20 min idle

Hi and sorry for my English,
When I use it, everything is ok, but after 20 min idle it's hanging, ctrl,alt del no respond, only way to switch off is power button.
I changed VGA driver, disable hard disk switch off, disable screen server, run RAM check, still the same problem.
Any idea what is the problem?

It is not easy to say why this happen. We can just speculate why this happen and your answer can be yes or no.
Maybe you should install Vista again using Toshiba recovery image. Test it with clean preinstalled OS.
I am pretty sure after doing this your notebook wills works well and you will not be faced with freezing issues.
What do you think about it?

Premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

G62 Freezes after 2 mins

HP G62
Windows 7 64 bit
G62 started freezing suddenly after having it a year. It consistently froze after 2mins of booting up several times. I log on to safe mode and went on the forum where i took the advice to do a "driver check" for errors. This fixed it temporally to the point that it does not freeze after 2mins, but it has frozen randomly twice in the last two days. What do you suggest?
I havent loaded anything new or done anything different to cause this problem.

In your situation first thing you could do would be to run a diagnostic test from F2 on the startup to make sure your hardware isn't having any issues. Since you can access safe mode it is a big chance that you have a driver or software malfunction. You can access msconfig in safe mode by going to the start menu typing in msconfig in the search field. When another box comes up select on startup tab and disable all. Attempt to reboot into normal windows. If you are able to one or more of your startup prgs are not allowing you to boot. My suggestion then would be a factory reset.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Web cam freezes after few min in yahoo messenger

Similar Messages

Maybe you are looking for