Web cam is blue. how do I correct color balance

When using the onboard web cam, the color tint is bluish.  How can I check the white balance for the web cam?

See also:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
*https://support.mozilla.org/kb/Unable+to+download+or+save+files

Similar Messages

  • Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

    Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
    The airco system gives an error:
    Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
    Advanced info: ssl_error_no_cypher_overlap
    The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
    I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

    hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
    enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
    https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

  • How to do Audio/Vedio streaming between web cams and back end servers?

    I want to implement an internet chat  application, I mean, I want a front end, which connects a web cam (mic  and speaker). So, I can send videos and audios to a back end server (do  flash streaming? but I am not sure what good product out there I can  use), and also send both A/V to another computer on the internet. In  other words, need a front end that sends local a/v from webcam  (&mic) to backend and receives remote a/v from backend to webcam  (and speaker) + backend streaming server.
    Any suggestions of techniques to be used? What back end flash streaming  server should I sue? How to acquire A/V from web cam (& mic) and how  to send A/V to web cam (&speaker) to play?
    Thanks a lot!

    Front end development:-  You can use Flash CS4/CS5 or Flex Builder.
    Back-end Programming - Server-side programming is basically done using ActionScript. You can use Flash CS4 , but there is no need for special authoring tool, you can do with even text-editor. After you author, you just need to place files at proper location on FMS.
    Front-end runtime - You just need Flash Player installed , basically active-x or plug-in in your browser - which you would already have by now
    Also if you decide to write AIR application for your front-end, you will need AIR - which is again free
    Hope that answers your questions

  • How to detect red frame in a series of images using web cam?

    hey i am a new use of lab view(8.2 n 8.6).kindly ca any1 help me out in red color detection in a series of frames being capture by a usb web cam.i have done the grabbing thing but dont knw what to do now.plz help me out. basically i hve to do the following things:
    1 )the camera is continuously making video
     2)the moment a red color or red frame comes across the camera the camera is programmed such that it will capture that red frame. and display that captured frame
    plz hep me out.i need serious help.
    i am attaching a vi that is grabbing the images and then xtracting the red color info n thn displyaing its intensities rows and coumn wise on a graph.here i have used a guassian surface to locate the red color.
    Solved!
    Go to Solution.
    Attachments:
    giving intensity of red color.vi ‏78 KB

    hey,i have made the code plz chk it and do rep soon as ma project sbmission date is very near =((
    i am snaping an image from the web cam then comparing it with the red colored jpg image made in paint.
    the jpg image is converted  to give input image to imaq match vi.but after the comparison it gives the same output.
    on the front pannel the snapped image is displayed,the red colored image that is converted in to its respective pixels is displayed and the image that is obtained after cheking the image in the draw fails vi...the pic converted to pixels is all the time displayed.and the pass/fail icon always denotes one pass led on..plz chk the code =((.
    also can u provide me some guide line for using thr hough transform for the red color detection in lab view..i dont have to import the matlab code..i have to purely make it using the lb view libraries.
    also one more request pl rep me regularly as i really need your golden piece of advice for ma success.
    thnx
    Attachments:
    picture to image(BY ME).vi ‏102 KB
    untitled.JPG ‏3 KB

  • Nokia mobile camera use as web cam..?

    My mobile is nokia asha 210 and i want to use its camera as web cam..
    How can i do it..?
    Can anyone help..?

    There you go …

  • How do I correct distored icons and print on eMac desktop?

    How do I correct color distortion of icons and faded print on eMac desktop?

    Hi Dennis,
    Is this Printing from an eMac Desktop computer, or the actual display coors on the Desktop of the eMac?
    If the Latter try this.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

  • Blue color balance with iSight and Java

    I have seen this question posted before - with no real answers, only suggestions that had nothing to do with the problem. Here's whats going on - internal camera and any connected Firewire camera works fine on iChat, PhotoBooth, IMovie, etc. Use those same cameras - internal or external- on a Java based web page and the image shifts to a blue monochrome. Not the blue you get with incorrect color balance from lighting, but nothing but blue hues. I can take the same Firewire camera and hook it to my G4 laptop running the same OS (10.4.8) and it works fine on the Java sites. Problem only occurs with Intel iMac and ANY camera. The problem appears to be the way the OS intergrates with Java (via Quicktime, or is QT out of the picture when using Java?)) on the Intel computer.

    I have looked on MacFixIt for both Blue Screen in Java and just Blue screen and have not turned up any results.
    11:46 AM Wednesday; December 27, 2006
    Happy Holidays

  • How do I get color management options in PSE9?

    I have been trying to print pictures on an HP printer and when I do they come out fairly red and pink.  When I go under more options under printing and select color management the only option that I have to adjust is print space.  I have a PSE9 book which shows that I should have color highlighting, image space, rendering intent as options but they do not appear.  I have tried many different solutions but nothing has helped, same results.  My file formats are in RAW but I also tried JPEG which ended with the same result.  I was thinking of reinstalling the software but wasn't sure if I would lose all of my files.
    Thanks,

    TXGB Packer a écrit:
    Sorry, I meant color handling.  However this is the screen that I was talking about.  The only option that mine shows is image space.  I want to know how to get the rest of this information to show up.  I believe once I get this fixed I should be able to make prints with the correct color balance.
    Do you mean 'color editing or correction' rather than 'color management' ? Correcting the color balance may be done in either of the quick, guided or full mode. If so, which mode do you use ?

  • When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

    I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
    When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
    My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
    How can I correct this please
    Probably no connection but
    I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
    Finally I had a phone call from a company called NERD-I.com
    offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
    Many thanks

    Hi Corel
    Thank you for your reply
    However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
    So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
    How do I do this please
    I have no bother with this on Win Internet Explorer but I like Firefox
    Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
    But I would appreciate knowing the correct solution from an expert

  • How to install web cam in my man mini?

    Hi,
    I have added usb external its type it has 4pins and I added an ordinary usb webcam, how can i used this in my yahoo messenger? If I'll start my web cam in ym it says no camara connected.
    Any help pls?
    Thanks.
    Arnel

    AndyO
    You are absolutely correct - iSights are expensive (here in the UK they are about £100) Using a camcorder is a good solution for occassional use except that they have the annoying habit of powering down at unexpected times when they are not actually recording. On the plus side they tend to have better lenses than even the iSight so work better in low light level indoors. There are also reports of regular use damaging the recording heads through spinning on a tape that is not moving. Not all camcorders now have firewire - a large number seem to only have USB.
    There are some USB webcams that claim to work with Macs - not many - my understanding though is that they don't work with iChat only with Yahoo. This might also be the case with the drivers available at the site in my previous post.
    At the end of the day individuals have to decide how much use they will make of a webcam and on which system then look at what is available or what they already have. The important thing is to do some homework before spending any money and check that new hardware will work with a mac and for what purposes.
    While I agree that the iSight is seriously overpriced it is the best solution if starting from scratch as they are well designed, work flawlessly with a Mac and there are quite a few other applications that can use it too - iStopMotion, Delicious Library etc.
    Me - in this case I'd keep checking out the drivers before spending anymore money.

  • How do I use my web camera to chat and take photos?

    I would like to use my web cam to live chat and post pictures and do not know how to use it properly.

    Sorry, Its not related to Mozilla Support

  • How do I use the web cam on my pc? Hp w2007 I have windows vista

    How do I use the web cam on my pc?  Hp w2007 I have windows vista

    Hp w2007 is a HP monitor without webcam ...
    Where is the webcam?
    V.
    *** Say 'Thanks' with Kudos ***

  • How do i use my FaceTime camera as a web cam?

    I am trying to figure out how to use the facetime camera on my macbook pro as a web cam with non apple users. Please help.

    If you are trying to use Flash based web sites that you open in your browser, there is no difference in operation regardless of whether your webcam is being viewed by a PC or by another Mac user.  However, if you are having problems with Flash sites, verify that your Flash plug-in is the latest one that is compatible with your system.
      • You can find the latest Flash version that works with your OS X 10.7.3 using this page:
          http://www.adobe.com/software/flash/about/
    If you need to update, use your Mac's Disk Utility to repair permissions.  Then follow Adobe's instructions here: http://kb2.adobe.com/cps/908/cpsid_90893.html
    Be sure to uninstall your current Flash player before installing the new one.
    Repair permissions again immediately following installation of the updated Flash player.
      • Be aware that the current Flash Player Preferences can  be configured in your
         Lion Mac's  > System Preferences... These settings may be blocking Flash on a system-wide basis.
      •  Individual Flash settings are still configured in the same way as older versions:
          http://tinyurl.com/5kjv3
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • How do I use the built in web cam?

    I would like to start using the web cam on this TouchSmart 600 but I am not sure where to go or how to start.  Do I need to use a certain software or how can I get to it?   Thanks

    Hi,
    Please use this guide
      h10032.www1.hp.com/ctg/Manual/c01455314.pdf
    Merry Christmas.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I use an external web cam with my Mac Pro on Skype?

    I am trying to use my MAC Pro with an external web cam (Logitec C615) on Skype. I want to use the external so that I can pan and video a room full of people. Kind of hard to do with the built in cam.
    How do I tell the Mac Pro to use the external for Skype and not the built in?

    Go to Skype preferences, click on audio/video, and choose your camera from the drop down menu...

Maybe you are looking for