Web cam is not recognized properly on Satellite L500D

Hi
I have a Satellite L500D when I login in the web cam app pops up and say web camera initialization failed. Please check your camera device and restart application or computer.
I press ok and the app closes down so I checked the device manager and there were no camera devices.
I downloaded the driver twice and still can`t see the driver in the device manager area.

Hi
Thats pretty strange.
Is your notebook preinstalled with original Toshiba recovery image (factory state)?
Everything is possible and it can be defective cam but best way to find it out is to install OS again using Toshiba HDD recovery installation. After doing this you will have factory state again.
With factory settings every hardware component should work properly.
Do not install any additional software. After finishing OS installation check webcam functionality to see if the same will happen again. if there is the same situation contact nearest Toshiba service and explain the situation.

Similar Messages

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

My HP-Pavilion dv6 web cam is not working properly, fluctuating always

My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

re-install drivers and try again. ( also easy capture )

Battery is not recognized properly on Satellite L500

Hi all.
Ive Toshiba Satellite L500 with Windows7. Two days ago a red cross appeared over battery indicator and notice: 30% available, plugged in, not charging. Consider replacing your battery.
And when I plug off AC laptop shuts down. I replaced the battery but the same action when plug out AC the computer shuts down. Run some antivirus programs no results. I installed a battery tester who told me that battery is not installed. Run SCF program not bad files.
Tried with power manager no results.
My battery works well on other similar laptop.
Pls help !!!

Hi mate
Are you using the latest BIOS?
Please check this!
You can access the BIOS pressing F2 at the beginning.
There you will find the BIOS version.
Compare this with the available BIOS on Toshiba page and update it if necessary.
I cannot say for sure that this would solve you problem but its definitely worth a try.
Greets

The web cam is not found

hi hope you can help me. happens that when i turn on the lap a message appears saying that the web cam could not be started and suggests to restart. i did it already but the same window is shown. moreover, i cant find the web cam app. model: toshiba satellite m645-s4114

Satellite M645-S4114
i cant find the web cam app.
It's here.
Toshiba Web Camera Application
-Jerry

My tx is so slow, the web cam is not working, the screen freezes and got color distortions

- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...

If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>

My web cam is not working, I downloaded a update of the web cam it was a 15 day trial, I dec ided I

I downloaded a updated version of the web cam installed on my laptop, it was a version 5, this is what I was told that would come with the laptop, is was a 15 day trial, I decided I didn't want to purchase it, and now my web cam is not working

Hi,
You may have a virus on your PC. Review this NBC Nightly news article.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

My integrated web cam is not working

I Am using hp pavilion p001tx laptop. My web cam is not working
It shows a warning
No web cam detected. Try to plugging in a webcam into your computer now. If you are using an integrated camera, Make sure that it is turned on.
Help me please.
My laptop serial number is [Personal Information Removed]

Check if the drivers are installed or not.
Try to update the camera drivers and restart the system.
You can also go to device manager setting and see if the webcam is disabled or not.
If everything fails try system resore or run OS recovery.

HP Compaq web cam is not working

I have Hp Compaq Notebook 620. The devices have 2MP Web Cam but the Web Cam is not working. When i try to make it on, its shows error
"No webcam detected. HP Webcam will now Close"
Please suggest the solution of the problem.

Hello Manishshakya,
I see that you are having problems with the webcam on your computer. The unit you have is a HP commercial unit.
I would suggest posting your problem in the HP Commercial Forum as well. There are more users with the computer you have on this board and it is specific to your computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Web cam driver not found

i have a hp pavillion dv6700 laptop,product no is KD311PA#ACJ.ITS WEB CAM IS NOT WORKING.i tried using youcam n lenovo web cam but no help.also the driver for this computer is also not displayed on your hp site. i'm currently using windows7 as os.

Hi anshikatandon7,
Here's a good place to start, information on how to find your webcam software and downloads and more. Post back if you have any questions!
Say "thanks" by clicking the Kudos thumbs up!
Was your question answered? Mark it as an Accepted Solution!
I work on behalf of HP

Web-Cam does not work on Lenovo G480, PLEAS HELP!!

Hello,
I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
I would REALLY appreciate the help. Thank you!

Have you installed camera drivers from the us support site? Try reinstalling them
Win 7
http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
Win 8
http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

New DVD drive not recognized on my Satellite Pro 4600

Hi all,
I have recently bought a brand new NEC ND-6650 DVD writer.
This drive is NOT recognized by my Satellite Pro 4600, at all - neither Windows 2000 nor in the BIOS (v 2.60). Bios updates higher than version 2.60 are not provided.
Does this mean I can forget about using the new writer in my old notebook?
Thanks and best regards,
Nils

Hi Nils,
I suspect that your new drive may be not be compatible with your notebook. As with all optical drives your new drive will be configured as either Slave or Master (or possible cable select), and this configuration must match your notebook.
Usually your hard drive will be configured as Master on IDE channel 0 with your optical drive being the slave device on the same channel. However, you may find that your optical drive is configured as Master on IDE channel 1.
Normally the setting is pre-configured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure that they are the same.
regards,

I've been getting an error message lately that says "Web Sync could not initialize properly". What do I do?

I've been getting an error message lately which states the following:
Web Sync could not initialize properly. Check that Polar Daemon is running and start Web Sync again. To restart Polar Daemon you need to run 2 commands in Terminal Start Applications>Utilities>Terminal. To stop Polar Daemon which is already running, write a command”sudo launchctl unload/library/launch daemon/fi.polar.polard.plist.” and press enter. Enter your password when required. If Polar Daemon is not running, “error unloading” message appears. Ignore this error message. Write “sudo launchclt load/library/launch daemons/fi.polar.polard. plist” and press enter to run Polar Daemon.
Is this something I should be concerned about, and if so, what do I do about it?
Thanks

That error message comes from third-party software that you installed. If it isn't working, either remove it according to the developer's instructions, reinstall it, or refer to the developer for support. Back up all data before making any changes.

My iPod Touch Front Camera Is Not Working Properly.

My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
Please Help.
Thank You.

The poster said he has iOS 5.1 which is the latest update.
apple81 wrote:
Hi: I had the same problem but it was fixed by performing software upgrade iOS 5. Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

Web pages do not render properly

Since my upgrade to Yosemite, web pages have not rendered properly in Safari. Here is a screen shot of AOL:

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
2. Select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Web cam is not recognized properly on Satellite L500D

Similar Messages

Maybe you are looking for