Web cam problem for HP HDX X16T-1200 CTO Premium Notebook PC

I have recently base installed windows 7 on my HP HDX X16T-1200 CTO Premium Notebook PC and since then i have not been able to use my web cam. It comes up in my driver manager but it comes up as an unknown device with a code 43 error. Please help, I am not sure what information would be need to solve this problem so please just tell me what is needed and how to find it.

Is there a possible way to identify the driver? It says it is installed correctly. Also i cannot find usbvideo.sys can this be the problem?

Similar Messages

The maximum acceptable hard drive size for hp hdx x16t-1200 cto ?

my laptop is hp hdx x16t-1200 cto
i want to know the maximum size of hard disk i can install in it (1TB or 750GB or 500 GB) ?
This question was solved.
View Solution.

Hi,
That means you can use up to 1TB (currently on the market, remember buy the 9.5mm one). These are how to do & tips:
http://computershopper.com/laptops/howto/replace-your-laptop-s-hard-drive
http://reviews.cnet.com/4520-11379_7-6445033-1.html
http://www.cnet.com.au/upgrade-your-laptops-hard-drive-339298932.htm
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP HDX X16T-1000 CTO PREMIUM NOTE BOOK; is this laptop compatible with a 500 GB HARD DRIVE.

HP HDX X16T-1000 CTO PREMIUM NOTE BOOK; is this laptop compatible with a 500 GB HARD DRIVE. CURRENTLY HAS 220 GB HDD; WANT TO INSTALL A 500 GB HDD.

Hi, There are many good and cheap HDD's now even SSD's are much cheaper than last year. Yes, you can use 500GB even more. Regards.

Where is the USB 3.0 port on the HP HDX X18T-1200 CTO ?

Does the HP HDX X18T-1200 CTO Premium Notebook PC have any USB 3.0 ports?
This question was solved.
View Solution.

No it does not. It predates USB 3.0 by quite a bit. You can add usb 3.0 ports with the expresscard slot and an add-in card.

Where can i find dvd driver files for my x16t-1200 cto?

I can't find driver files for my dvd player. can anyone point me in the right directions?
HP HDX Notebook - X16T-1200 CTO model
This question was solved.
View Solution.

Hi,
The driver for the CD/DVD drive is supplied by the Windows operating system. If you having problems with the drive, try the following.
Run the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it isn't, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

B500 - Web cam problem in windows 7

I just reinstall a new Windows 7. My web cam in my Ideacentre B500 doesn't work correctly. There is no web cam icon in "MY COMPUTER". I tried to find its driver in LENOVO website but I can't.

AndrewThompson64 wrote:
How closely is this related to your [other query|http://forums.sun.com/thread.jspa?threadID=5442164] about time zones in Java *1.3?*
Both the queries are related to same problem only.
Thanks a lot AndrewThompson64, baftos and WalterLaan.
figured out the problem. The source code for the java.util.TimeZone class's getDefault method shows it eventually invokes the sun.util.calendar.ZoneInfo class's getTimeZone method. This method takes a String parameter that is the ID for the required time zone. The default time zone ID is obtained from the user.timezone (System) property. If the user.timezone property is not defined, it tries to get the ID using a combination of the user.country and java.home (System) properties. If it doesn't succeed in finding a time zone ID, it uses a "fallback" GMT value. In other words, if it can't figure out the time zone ID, it uses GMT as your default time zone. JRE 1.3 in windows 7 was working in the same way.
Did a code change such that user.timezone property is set to IST by using the java.lang.System class's setProperty method.
System.setProperty("user.timezone","Asia/Calcutta"); This will ensure that application will stick to +5.30 of GMT time zone and is totally independant of the system OS(Widnows XP, Vista, Win 7) and system timezone setting(UTC/GMT). Have created a method to fetch the timezone string value (Asia/Calcutta) from DB. This will make bit more configurable. Tested it. It worked very well in my quality servers.

Web camera problems on new NB505-N500BL DR3

Hello,
I just got a new NB505 netbook for my wife. I checked the web camera application not long after powering it on, and it seemed to work fine. I installed a few things (like Skype, my printer drivers, Windows updates, etc.), and then I started to notice intermittent USB driver load failures, and the camera will not work.
When I run the Toshiba Web Camera Application, I get an error dialog saying that camera initialization failed. When I run Skype, it just fails to find the web camera altogether.
In Device Manager, I see one unknown USB device, and I'm not able to update its driver.
Again, this only happens sometimes (though most of the time), but I've not been able to figure out what I may have done differently the few times the camera actually works.
Does anyone have any ideas?
Thanks,
Ben

I have the same problem, but since the first time I use my lap.
It's brand new, but it's a problem to go to the place to ask for a replacement and I have noticed in google there is a lot of people with the same problem
I tried downloading the drivers but nothing works, there's a window saying the cam can't iniciate.
Please, help me. I'm from Mexico and ther is not phone help available in my country
I'm really upset with my thosiba

Rocketfish web camera problem

I have iChat 4.0.5 on an older PowerMac G4 (USB 1.1) and just got a Rocketfish web camera model RF-WEB2C. On my PowerMac it indicates that the camera is in use by another application. When I plug it on a newer MacBook Pro it works fine. Is the problem the USB? Any solutions? Are there web cameras that work on the PowerMac G4?
Thanks

Did you install http://www.ecamm.com/mac/iusbcam/ to get the cam to work.

Best TV Web Cam Needed For A Panasonic TC-P65VT30 ...

Hi Folks,
Well I purchased the Logitech TV Skype Cam (720P Video Calling) for now until I can find what I'm really looking for which I don't believe is made at this time.
If anyone has any info in terms of what I'm looking for (Last post 2/1/12) in a TV Web Cam for a Panasonic TC-P65VT30 65" VIERA Plasma 3D 1080P Full HD TV, please let me know.
Thanks,
Don

If you get no better advice here, here are some things you can consider:
• "best" webcam: http://discussions.apple.com/thread.jspa?messageID=5078791&#5078791
http://discussions.apple.com/thread.jspa?messageID=5289647&#5289647
Mac software necessary to run any Mac compatible camera is included in the applications you choose rather than with the cameras. Some apps you can use: http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
Some of these apps (such as *Photo Booth* and the latest iChat) have effects built in.
• "software that produces effects" can be added to some software with add on apps like iUSBCam, iGlasses, etc., from http://www.ecamm.com/
eCamm also offers apps such as Conference Recorder and Call Recorder that may be of interest if you want to add the capabilities that they add to iChat or Skype.
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.6) External iSight

Web camera Problem

HI i have G575 model in that web camera clarity and output sound also poor ..Tty to give solution for this

Hi
Welcome to the community.
As per your concern I would suggest you to please re-install the camera and sound driver from the below mentioned web link.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT072969
Also please use the camera in the brighten area.
Afterwards, please restart the system and check if the issue gets resolved.
Regard,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Web cam operation for hp pavillion dv2000

how do i begin operation of the web cam of my hp pavillion dv2000 lap top?i have never really used it but i cant find anything in my lapper that would show me how to activate the web cam.[other than the web cam icon which only shows technical specifications.]i have just installed windows seven.
any ideas?

Usually the webcam can be setup for use in any messaging app such as Yahoo Messenger, MSN Messenger,etc. There is also Cyberlink YouCam software which can be used to capture shots,etc from the webcam.
ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45825.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do I turn on the Web cam on my HP Pavilion DV4T-1400 CTO Entertainment PC?

»HP Pavilion dv4t-1400 CTO Entertainment Notebook PC
Serial Number: (Personal information removed by Moderator)
Product Number: NS270AV
Please help me! thanks

Hi there @RogerPham1978
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are looking for help with your webcam on your notebook. I am happy to help with this.
Please post the operating system in use on your notebook. See the following, if you need help with that information.
Is the Windows Version on My Computer 32-bit or 64-bit?
Take a look at the following pages, which show how to test or setup the webcam. Some are for Windows Vista, Windows 7, or both.
HP Notebook PCs - Testing a Webcam Using YouCam
HP Notebook PCs - Testing a Webcam Using QuickPlay
HP Notebook PCs - How to Set Up the HP Webcam in Your Favorite Messenger for Windows 7
Let me know if that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HD Replacement for HP Pavilion dm1z-3000 CTO Entertainment Notebook PC

Hello.
I have a HP Pavilion dm1z-3000 CTO Entertainment Notebook PC , Product Number: XL303AV
I am having SMART HD monitor failure mensage at startup and the computer is very slow.
I just bought a OCZ Vertex V3 SSD 256mb and i want to create a recovery media but the recovery media creation in my computer is not working.
I did a backup of my files and a complete recovery from the F11 at startup.
The Notebook is runnig good, but the SMART screen reporting failure keeps appearing and windows is poping up HD failure alert.
The recovery media creation keeps not working (32GB USB drive), the formating step do not end never. I already tryied with another USB pendrive and no sucess.
The recovery partition is there. How to create a recovery media for my new SSD HD ?
Other problem:
I tryied to order the recovery media at HP site but i have a USA buyed notebook and i live in Brazil, and it is impossible to order that for shipping to Brazil (stupid). HP Brazil do not recognize my serial and produt number, sending me to USA site.
My windows 7 is the 64bits Home Premium.
Help me
Regards
Cristiano

Hi,
If the impending failure alert from the HD SMART is popping up, then creating USB from the original hard disk at this point is not likely to be successful.
You can try copying the recovery partition to an external drive in order to keep it. Use the OCZTechnology forum as a source for how to initially setup the SSD drive. I have a Vertex 3 SSD in this particular desktop PC and I love the performance it provides.
What was the size of the original hard disk?
I highly recommend that you use the Porutgese language HP Consumer support forum if you are familiar with the language. There are experts there who are quite likely to be familiar with the problem you are facing with in acquiring the recovery disk set. I met some of them last March in San Francisco at the HP Social Summit.
All you need to do to access the Portugese language HP Global forum is change the language tab at the upper right where it says English to Portugese.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Quickweb software upgrade for HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers

Hi
I have purchased my laptop in the year 2010 from HP. Now i need to upgrade HP QuickWeb software .
My current version is less than 1.0. I guess we have latest version as 3 or above..
Please let me know how to update the software to version 3 or greater.
Here is my laptop model
HP Pavilion dv6t-3000 CTO Entertainment Notebook PC
Product name: HP Pavilion dv6 Notebook PC
Windows 7 Home Premium 64-bit Service Pack 1

Hello @SridharGaddam,
I understand that you are looking for an upgraded version of HP Quickweb for your HP Pavilion dv6t-3000 CTO Notebook PC. I am providing you with a link to the HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers, which has all the most current drivers and software available for your computer. This is the software that HP has updated for your computer, and if you do not see the software you are looking for that means it is not compatible with your computer.
I hope this answers your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I want to build an application using web camera "Logitech" For that what are the steps I had to take?? Help me...

EID [email protected]

Hi,
Do you mean that you want your application to send and recieve the audio/video data online. If it is so, I think you can write applets and use them in the application. Or you can also use Macromedia Flash to do the same in a better way. For further info about Flash player please visit
http://www.macromedia.com/software/flash/about.
And as a reference please once visit www.mlb.com, which has some video library running on iAS.
Hope this might have given you some poiters that help you. Should you have any further queries please get back to our software forum.
Thanks and All the best,
Rakesh.

Web cam problem for HP HDX X16T-1200 CTO Premium Notebook PC

Similar Messages

Maybe you are looking for