Web camera application settings not changing

My webcam settings stopped working. I have Windows 7 Ultimate 64 bit, Satellite C55-A5310. It worked fine and a few days ago the settings stopped working. I click mirror or flip and none of them work. The settings for colors don't work as well. I have tried uninstalling and reinstalling. How do I fix this and what is the link for checking the drivers for it? 

If your computer is less than a year old I'd suggest contacting Toshiba Support as it is still under warranty.
You say you restored your computer.  Did you restore it to out-of-box state, or use a restore point?
I agree with you in that cannot locate the web cam driver on your support site.  Again, I'd contact Toshiba support and ask them where the driver/app is for your camera. 
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

  • Portege R835-P56X web cam application stuck on screen

    So hi peeps, Ive had my Portege for almost 3 years, and this problem just started in the last month or so. The application menu that is hidden off screen and slides out when you put your mouse there is stuck on screen, will not go away, and remains on top when other programs are running. Its extremely annoying! There's no error message or anything. Has anyone else encountered this problem? And if so, how do you fix it?
    TIA!!
    Attachments:
    webcamapp.png ‏441 KB
    webcamapp2.png ‏91 KB

    Portege R835-P56X
    Downoads here.
    I would uninstall and reinstall the application.
       Toshiba Web Camera Application
    -Jerry

  • Toshiba Web Camera Application

    HI,
     A while ago on my computer the web camera application stopped working after it had previously been for a couple weeks before hand. Whenever I clicked on it my screen would go black and then come back and nothing would happen. Now I am trying to fix the problem,I just tried uninstalling it from my computer which I did and now when I click on it it tells me that windows is searching for it and I can browse for it myself if I want. I then tried reinstalling it from the support area of Toshiba.com and after I had downloaded it nothing happened, I clicked run and then that was it the program never popped up on my desktop. I was wondering if maybe I downloaded it wrong or if any one else has any ideas on how to fix this problem it would be greatly appreciated.
    Thank you.

    What model number is your computer? It should be on a label on the bottom.
    - Peter

  • Hp web cam drivers are not installed

    hey i got problem,in device manger my hp web cam drivers are not installed ...from where should i download the drivers of hp web cam..thank u 

    Hi  
    HP Universal Camera Driver

  • Web camera application causes IRQL_NOT_LESS_OR_EQUAL

    Hi
    Whenever I try to go to web camera application it causes an IRQL_NOT_LESS_OR_EQUAL error. This started when I the battery drained out while doing the facial recognition login process in Vista. The web cam can be used fine, however when I try to use the program it causes the Blue Screen. I tried reinstalling the software to no avail.

    Which computer?
    -Jerry

  • Web camera application doesn't auto hide on my Satellite A660

    Hi
    Just getting started with my Satellite A660. The Web Camera Application doesn't want to autohide at the edges of the screen.
    The only way I can get it off the screen is to close it. Can anyone suggest a solution to make it autohide?
    thanks,
    Simon.

    >.... all you have to do is move the app to either side of the screen and it'll hide itself.
    > I don't know why someone wouldn't go on to explain after pointing out the obvious solution as clicking on "Auto Hide."
    As far as I know, by default, preinstalled application and small menu are already on the side (left) and with enabled Auto Hide so the question is why this doesnt work.
    Has used moved the menu in the middle on the screen or what?

  • Urgent : Through proxy my web based application is not being accessible

    Hi,
    Would you please give me the solution as why my application is not getting accessed through proxy (in LAN environment). If I access the same application through dial-up connection, the application works fine and runs successfully.
    When I access through proxy, my java console reads like follows:
    proxyHost=172.31.2.3
    proxyPort=8080
    connectMode=HTTP
    Opening http://gati3pl.com/forms60java/oracle/ewt/alert/resource/AlertBundle_en_US.class proxy=172.31.2.3:8080
    after this information, its giving an alert saying:
    'FRM-92050: Failed to connect to server: gati3pl.com:9001'.
    Would you recommend as what proxy settings to be made, so that my application runs successfully through proxy also.
    I will be very much thankful to you for your kind suggestion.
    Regards
    Thobula Rakesh

    Your can solve this problem in two ways.
    1. Your can configure your browser to bypass proxy for the URL address http://gati3pl.com
    There is a option in IE at Tools->Internet Options->Connections->LAN Settings->Bypass Proxy Server for Local Address.
    2. You can configure your Form Server to run in HTTP mode and by
    default Forms Server runs in SOCKET mode.
    To do this you will have to change the Form Server Service from
    SOCKET mode to HTTP mode and also change access mode in HTML file from SOCKET to HTTP
    Best Regards,
    Darshan Desai

  • GP, callable object Web Dynpro Application (bespoke) not appearing in list

    Hey y'all
    We're developing our first GP, and we would like to call an existing bespoke Web Dynpro. When creating the callable object, we're selecting type Web Dynpro Application, but our Web Dynpro screen is not appearing in the drop down list on the next page. We think that this is because the application has been deployed to a different server (i.e. it has not been deployed onto the portal server).
    So the question is, has anyone faced this problem before, and is there a solution?
    Kind regards
    Jon

    Hi John,
    Please have a look at this Exception on creating GP Action
    This will solve your issue definitively. Do not take care of a given SDA, just redeploy everything and make sure that everything is overwritten by selecting the right option.
    Best regards,
    David

  • Web Dynpro application does not apply portal theme

    Hi Guys,
    We created a new portal theme and assigned it to our users. The portal desktop gets assigned succesfully and portal applications also show the new theme colors. But all web dynpro pages still show in the blue SAP theme. This issue only occurs on our development portal, when we import the same theme on our test portal is all works fine.
    I also tried to assign the WebDynpro parameters "sap.useWebDynproStyleSheet" and "sap.theme.default" and then the web dynpro applications are indeed forced into the portal theme. However, that is no soluition since all web dynpro applications then use the theme including SAP applications like the NetWeaver Administrator.
    We looked at OSS note '1446099 - Web Dynpro application not displayed
    in customer theme' but the stylesheets are not different.
    sap portal sytlesheet: UR=7.31.0.14.1
    Web Dynpro Style sheet: UR Version=7.31.0.14.0
    The portals in which the theme does work have the same stylesheet versions as mentioned above.
    We also created an OSS message for this so if we solve it that way I will update this message. But if there is anyone on this forum that might have an idea that it would be highly appreciated. If the problem takes too long to solve we will perform a refresh from a portal that works but I hope that we will be able to find the reason of this behavior.
    Kind Regards,
    Nico van der Linden...

    In theory, these versions should work correctly.
    You can compare the patch levels applied on your dev portal and test portal - specifically compare the version/patch for the component EPPSERV*.SCA - and see if you have any differences there.
    Thanks,
    Shanti

  • My web cam icon is not activated on one of my cont...

    Hi My web cam works in skype on all but one of my contacts. The icon is not hightlighted next to the call one. What is missing.
    Cheers
    Martin

    18355 wrote:
    It looks like a telephone not a camera
    This contact is added to your contact list as a phone number contact. It's not possible to make video calls to a phone number. Video calls are only possible to Skype contacts.

  • TS1702 The default Camera application is not responding, it comes with black screen. Functions on the screen are unresponsive, very slow.

    Dear community,
    The default camera application became un-usable in my iPhone5. Cannot operate camera at all. It comes with a blank/black screen, camera controls are unresponsive, front-back camera toggle switch takes couple of minutes to response but with a blank/black screen both front and back.
    I searched solutions and applied but none seems to work. I reset my phone, started as blank, with no user account, still camera is acting same (or rather not acting). Other apps that use camera give error when try to access the camera such as whatsap and skype. Facetime comes with a very blurred view. Couple of screen shots are attached.
    I think need to erase and reload the camera program but I could not find how to do it. Is it possible? or is there any other suggestions?

    Hello hakanid,
    The following article provides some useful troubleshooting steps that can help get your iPhone's camera working.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Re: Satellite A660 - Toshiba Utilities - Web Camera Application missing

    I have a new Satellite A660 with inbuiilt web camera, but there is no Toshiba software (as stated in the Manual) to run the web camera, nor the face recognition software.
    I havent checked anything else yet but not in Programs directory and nowhere on the Start menu.
    Any help as to where to find the software ?

    I agree with Paolo30, if the webcam is available on this notebook, then an right software should be installed as well. Go to the Toshiba driver page and check for your model:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    [Australian Toshiba Driver Page|http://www.mytoshiba.com.au/support]
    However, on my laptop I haven't installed any Toshiba webcam utility myself, Windows made it by default. And it runs..... Maybe, it will work better with original Toshiba driver but I don't use webcam at all.
    Message was edited by: Jeka-??

  • Web Dynpro Application is not openeing from Portal UWL

    Hi,
    I have developed a WD application which is integrated in the portal. This WD application navigates through several levels of approval by triggering the workflow. Initially USER will create the request launching the WD application from portal and upon clicking the SUBMIT button -> Workflow will be triggered and Work item will be sent to Approver UWL list in the Portal.
    Link will be displayed in the UWL list and upon clicking that link WD application need to be opened where the details will be displayed and can approve the request by clicking on APPROVE button.
    Here, We have created a PFCG role which can be assigned to USER to access the WD application to create the request from portal. But for Approvers, we have not assigned any such roles except UWL role.
    Workflow is working fine, Workitem is displayed in Approvers UWL but when they click on the link -> WD Application is not opening. Configuration in SWFVISU is done.
    I think we are missing some roles which need to be assigned to Approvers. We cross checked by assigning SAP_ALL profile to the Approers and found WD application is getting opened and everything is working fine. But we are not supposed to give SAP_ALL in the PRD.
    Please help what are the other roles that need to be assigned to Approvers.
    Thanks,
    Bharath.

    did you try by assigning pfcg roles to approvers along with Uwl?
    Regards
    Srinivas

  • Save for web gif loop settings not working

    Photoshop CC 2014 Mac Pro 10.8.5
    When I change looping settings from "once" to "forever" when saving a gif it only loops once. I tried multiple times. In the end what got it to work was changing looping back and fourth from "once" to "forever" over and over and over until randomly the preview started looping. At that point when I saved it worked correctly.

    I’m not really sure; it could be a Mac problem.
    This is the Adobe statement on Lion:
    Mac OS 10.7 has some exciting new features such as Autosave, Restore, Versioning, Full Screen Mode, and more multi-touch gestures. For Adobe applications to fully support these features, additional product development is required. Adobe is working to address this issue.
    There is one other thing you could try. Open a photo in the Editor and then hold down the Cmd+Opt+Shift Keys and press the letter S
    It’s also possible to delete the save for web preferences and then re-start the program to re-build them. This involves holding down Cmd+Opt keys and clicking Save for Web under the File menu. However this may not be possible if save for web is grayed out.
    Please let us know if you get it fixed.

  • Since Monday, Firefox times out when I search the web and I have not changed anything with the system.

    I was able to search the web as late as Sunday. But since Monday I am unable to. I have changed nothing. Bookmarks, email, Facebook work. Can search on laptop using the router, so internet connection is fine. The new google search on FB doesn't work either. Nor does searching with Chrome or IE. Have reset Firefox, restarted the computer, restored computer to previous Saturday. All I get when searching is This operation timed out.

    I think you must to a clean re-install, this means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

Maybe you are looking for