Web camera not working after sowtware update

HI, there
My macbook's  (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

    Hi purduejatt,  I apologize for the delayed response as I understand how important it is to have a working camera!  I would suggest clearing the data in the Camera application.  Press Menu>Settings>Application Manager>All>Camera>Clear data.  Please keep me updated on the status as I would be more than happy to provide additional support.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

  • Camera not working after OS update to 10.2

    I had updated my BlackBerry Z10 to OS 10.2 as per alerted by the phone. However, upon updating the phone, my camera stopped working. Also, now the videos won't play in the phone either! Please help!

    You can reset your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
    To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
    Once Wiped reconnect your phone to your computer and install your stuff.
    http://us.blackberry.com/software/desktop/blackberry-link.html

  • C7 Camera not working after Belle update

    Hi,
    I updated my C7 from Anna to Belle yesterday and now the camera gives this error message:
    "Unexpected error occured. Please restart the camera. If this does not help, try restarting the phone"
    I did all of the following:
    1. Restart phone -> no change
    2. Factory reset -> no change
    3. Reinstall Belle -> no change
    Camera with Anna firmware worked fine and the software prior to that.
    Anyone know what's wrong?

    1.First backup all your data.
    2. Switch off your phone.
    3. Press volume down button, camera button, menu button simultaneously.
    4. While keeping above buttons pressed, press power button and keep all these four buttons pressed till your phone restarts.
    It is possible that you may lose many of your apps. Check software update menu of your phone whether you have any updates available and install them.
    In Love With My C6-01:Now running on Nokia Belle!

  • Droid DNA camera not working after KitKat update

    I have updated my Droid DNA to the latest KitKat update.  Now the camera doesn't open and says "Unable to start the camera".
    has anyone else seen this?  Does anyone know ho to uninstall the update, or fix the issue.  I've tried third party camera apps and they all cant open the camera.
    Thanks for any responses!!!

    No it is not covered under the warranty.  I upgrade the phone with Verizon approved upgrade and it breaks my phone and i am told since it is outside of warranty I am out of luck. I have to live with a smart phone with no camera or pay a huge deductible to have my phone insurance cover it.  I just hope I'm not the only one with a camera problem so maybe HTC will provide another update to fix the camera.  Maybe some day I will have use of my camera again

  • Macbook pro 15.4 early 2011 FaceTime HD camera not working after OS update to maverick HELP!

    I have recently found out that my MacBook Pro 15.4 early 2011 model the FaceTime HD camera is not loading or is missing.
    I have performed VRAM reset PRAM reset and also looked for third party software from AirDisplay and this software is not installed. I have also performed reinstalling the combo pack for 10.9.2 still nothing. But going through my extension I did find that isight is listed and it status is not loaded.I also checked my usb and I don't see FaceTime HD camera listed. I do have automater on my Mac not sure if this would cause an issuse or not.I also tried other applications like photobooth, Facetime, Camera. Any other advice would be great.

    my computer has not been able to connect to my built-in camera
    iSight is the built-in camera.
    Help here > How to Troubleshoot iSight

  • Web Cam not working on envy m6. Followed troublesho​oting link already

    Hi, web cam stopped working after Win 8.1 update.
    Your official troubleshooting didnt help
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03430151&tmp_task=solveCategory&cc=us&dlc=en&lc​...
    In device manager TrueVision Hd device works properly, and windows says that drivers are up to date, and so steps in a link above are useless for me. Meanwhile Cyberlink You Cam says that my cam is not installed. What should i do? Maybe i need to revert back to win 8 (from win 8.1). How can i do tihs? 
    plz help

    Hi FIXMYWEBCAM,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY m6 Notebook and having Webcam issues. Have you tried to uninstall the TrueVision Hd device? If you do restart the Notebook after you uninstall it. It should install the current driver for you. Have you tried to use the automated troubleshooting for Windows 8.1? Here is a document on how to restore your Windows to 8.
    Hope this helps,
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

Maybe you are looking for

  • Asset Accountng Issue

    Hi in AS01 creation of Asset master data, the description field is only 50 characters and the Asset main text is also  50 Characters. But client requirement is that the description he want to 200 characters because he has huge descrition to capture i

  • Urgent! Need help in GUI!

    Hi, I am doing a small java project and I am expected to code all the GUI I need in just one class file. Can someone help me? My GUI consists of 2 JButtons, 2 JLabels and 1 JTextField. Also I need to have ActionListener for both of the buttons all in

  • Initialisation data load failure

    Hi all, My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok. I am pasting the shrot dump from the source system below. Error analysis                    

  • Tree List Value

    Apex4 datbase 10g EE Hello Apex Users, how can I get the Value Of a tree list then pass that value to the textfield using Javascript? Is that Possible? Hope for a quick response and answer. regards, jose

  • Job jumps from Scheduled to Finished for RDA DSO

    Hi, A job in production for RDA DSO load started jumping directly from " scheduled to finished " when the job gets kicked off, instead of going to " Active " state. The log in SM37 shows the job finished successfully and I do not find any errors anyw