Web composer option not displaying while Customizing Error Messages of Portal applications

Hi
I am trying to customize the error messages through web composer in sap portal but when i Choose System Administration → System Configuration → Knowledge Management → Content Management Web composer option is not shown . I am using netwearver 7.0
please guide me I searched google but couln't find any satisfactory answer.
Thanks

Hi Raima,
From your description I assume you are attempting to implement the steps outlined in the following documentation, is this correct -
Modifying Error Pages - Carrying Out the Initial Configuration - SAP Library
If you are navigating to the KM configuration through the steps you outlined and you do not see WPC Composer listed under 'Content Management' I would suspect that it is not deployed on your system (at least not successfully). It is not included as part of the default stack in EP 7.0 and must be deployed separately. If you do intent to deploy this component, you should also note that the SP level of the KMC-WPC SCA should match the SP level of the other KM and EP components.

Similar Messages

TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

Can't open web addresses from an email-get an ERROR message saying-no application could be found

Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

OAF page is not able to display the custom error messages

Hi,
I have extended a seeded CO and trying to throw few custom error messages.
It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
Is there any profile option which enables the custom messages?
Thanks,
Ranita

Hi,
There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
use the following syntax for writing a msg in Jdeveloper
pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
and enable the following profile option to yes
Fnd:Diagnostics
Regards
Chanu

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

Custom Error message in portal

HI Experts,
I trying to implement cutom error messages in portal. By Following the below link.
[https://cw.sdn.sap.com/cw/community/docupedia/nw70java/blog/2010/03/21/custom-error-messages-in-the-portal]
As of now I trying to implement it for error code "500".
<error-page>
 <error-code>500</error-code>
 <location>/Customerrors/500.html</location>
 </error-page>
</web-app>
The above code I pasted in web.xml. 500.html is there in customerrors folder. I have also restrated the system.
when I log in to portal system still I could see standard message coming for "500" code error not the custom one from 500.html.
Iam using EP7.0 EHP1 .
Thanks
Surender Singh Dahiya

Surender,
I guess it should work in the similar fashion.However, I do not have access to a portal system now. Will try testing the scenario soon and keep you posted.
Cheers!
Sandeep Tudumu

How to add custom error message in standard application log of change doc.

Hi,
While saving chnage document I need to add raise an error on specific condition. As Error messages is being shown in application log I added custom message in include LCRM_1O_UIF15 by using BAL_LOG_MSG_ADD FM however it is not showing in the screen. What could be the reason? Can anybody please explain?
Rgds
Sudhanshu

Muhammed,
Have you tried throwing a JboException in your AM code?
John

How to throw Custom Error message in Portal

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

Error Message in portal application.log

Hi all,
There are error messages continually been written to application.log.
Here is the path.
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
We couldn't find out what's wrong.
Portal Version is 10.1.2.2.0.
application.log
07/01/31 16:54:54 portal: [module=RepositoryServlet, ecid=103102642203,1] ERROR: Repository Gateway error: Request Processing Error:
maxlength.htc: PROCEDURE DOESN'T EXIST
07/01/31 17:23:44 portal: [module=RepositoryServlet, ecid=133169185626,1] ERROR: Repository Gateway error: Request Processing Error:
maxlength.htc: PROCEDURE DOESN'T EXIST
07/01/31 17:23:58 portal: Broken pipe
07/01/31 17:23:58 portal: Broken pipe
07/01/31 17:23:58 portal: id=146054097151,1 Exception processing portlet response
java.lang.ArrayIndexOutOfBoundsException
     at java.lang.System.arraycopy(Native Method)
     at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:216)
     at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:151)
     at oracle.webdb.repository.service.RepositoryHttpResponseWrapper$RepositoryOutputStreamWrapper.write(Unknown Source)
     at oracle.webdb.page.CharConvertingOutputStream.write(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.addToOutputStream(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.includePortlet(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.parseLayout(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.assemblePage(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.process(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.Main.doRequest(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:260)
     at oracle.webdb.portal.servlet.PortalServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:228)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
----------------------

$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
os the log of the "parent application". This is rather high level in the container. The message in the logfiles tells you that a procedure doesn't exist.
This can mean 3 things:
1. The procedure really doesn't exist
2. The procedure expects different parameters then passed
3. In the procedure a specific array member is called (but not found). (don't know how to explain this better in English, sorry for that).
It has been a while since I touched portal. In the past portal used a DAD (located in your HTTP-Server configuration). By changing the error style of the dad, you might find a more comprohensive error message.

Please help with custom error messages

Hello,
I am trying to display my own error messages for the <f:validate_required /> validation.
Here is what I tried:
-in my faces config xml file, I have:
<message-resources>
<message-resources-id>myResourceID</message-resources-id>
<message>
<message-id>javax.faces.validator.RequiredValidator.FAILED_MESSSAGE_ID</message-id>
<summary xml:lang="en">No name was entered</summary>
</message>
</message-resources>
-in the jsp page, I have:
<h:input_text id="name" valueRef="person.name" >
<f:validate_required />
</h:input_text>
(below:)
<h:output_errors id="myResourceID" for="name"/>
It is not displaying my custom error message ("no name was entered") but the default error messages.
Please help!!
Juju

Unfortunately, the current version of the reference implementation does not pick up replacement messages from <message-resources> elements yet. This will be corrected prior to the next release.
Once that is done, the original proposal will work if one change is made -- all of the standard validators pick up their messages from a standard message resources identifier, so you will need to change to:
<message-resources-id>
javax.faces.context.FACES_API_MESSAGES
</message-resources-id>
instead of your own message resources identifier.
Craig

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

Custom error messages on while validating User profile

Hi,
I have developed a valadation handler to validate data of a user while creating/updating.
If any of the attribute valation failed then my ValidationFailedException is getting triggered but it is showing my custom message on the server logs and on UI console i am getting "Server error occured" message. It is not display my custom errror message on the ui console.
Please let me know the steps to perform to show my custom error messages on ui console.
Below are the steps I followed.
1) Develeped a class which implements ValidationHandler.
2) Imported plugin into MDS database
3) Imported EventHandler xml into MDS database.

{thread:id=2256511}
-Bikash

Cannot display custom error message in CRM_MKTLIST_BADI

We did implement the following BADI BADI Name: CRM_MKTLIST_BADI
Interface: IF_EX_CRM_MKTLIST_BADI Method: MAP_AND_CONVERT_DATA
This enhancement is for suport the extension field for create new BP in
external list management (transaction CRMD_MKTLIST). The BP creation
process work properly but we cannot display our custom error message,
only SAP standard error message is shown. We did try using the export
parameter ET_MKTLIST_E but it does not work as expected, custom message
still cannot display.
How we can be show the custome error message ?
Thanks in advance.
Supreeya K.

Hello Supreeya,
have you tried to post this question in the SAP CRM: Webclient UI - Framework forum?
Regards
Gregor

Component level display of the Custom Error Message in 11g

Iam using custom error handler that extends the default DCErrorHandlerImpl class to handle the Custom exceptions thrown from the service layer, and able to see the exception displayed in the ADF UI in a popup window.
How can we do Customization in order to display the Custom error message inline with a component (i.e. associated with a specific UI component with the arrow mark look and feel ) instead of the global level message displayed as a pop up window on the ADF UI page? Please suggest.
Thanks,
Kayal.
Edited by: user11217416 on Feb 15, 2012 6:07 AM
Edited by: user11217416 on Feb 15, 2012 6:14 AM

Hi,
Try as follows
final static int MSG_FATAL = 1;
final static int MSG_ERROR = 2;
final static int MSG_WARN = 3;
final static int MSG_INFO = 4;
      public static void showMsgForRelevantComponentAll(int iSeverity, String sMsg, UIComponent uIComponent) {
          FacesMessage msg = null;
          switch (iSeverity) {
          case MSG_FATAL:
              msg = new FacesMessage(FacesMessage.SEVERITY_FATAL, null, sMsg);
              break;
          case MSG_ERROR:
              msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, sMsg);
              break;
          case MSG_WARN:
              msg = new FacesMessage(FacesMessage.SEVERITY_WARN, null, sMsg);
              break;
          case MSG_INFO:
          default:
              msg = new FacesMessage(FacesMessage.SEVERITY_INFO, null, sMsg);
          FacesContext facesContext = FacesContext.getCurrentInstance();
          facesContext.addMessage(uIComponent.getClientId(facesContext), msg);
      }

Catch datetime exception and custom error message in SSRS

I currently working on create report by using SSRS. I have 2 parameters: [Start date] and [End date] to filter data from database and show it on report. I want to validate 2 datetime parameter as describe above. Please tell me a solution to do this.
For example:
When user type the text like: 4/15/2014mmm => System validation thrown a message: [The From Date not correct type]
But in my case, I want to receive a custom error message by myself.(Look like: [Date Invalid!])

Hi Brain,
According to your description, you have a report with two parameters for user to input. Now you want to validate these two parameters and display custom error message when the date is invalid. Right?
In Reporting Service, it doesn’t provide any interference for us to modify the system error message (the text in grey color). That means we can’t modify the system message when error occurs. However we can create a textbox in this report, use custom code
and expression to display the custom error message. But this all based on the report is successfully running. So if error occurs during report processing, all the custom code and expression will not work. In this scenario, we find a workaround for you. We
use custom code to judge if the date is valid, if the users type an invalid date, we return a default value to make sure this report can successfully run. Then we use expression to control the visibility of tablix in this report and create a textbox to show
the custom error message. Your case has been tested in our local environment. Here are steps and screenshots for your reference:
Go to Report Properties. Put the code below into custom code:
Public Shared a As Integer=0
Public Shared Function IsDate(d1 As String,d2 As String) as Integer
        Try
           FormatDateTime(d1)
           FormatDateTime(d2)
        Catch ex As Exception
                   a=1
        End Try
return a
End Function
Create two parameters. One is StartDate, the other is EndDate. Set the data type of these two parameters Text.
Create a filter for StartDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!StartDate.Value,"1/1/2012")),CDate("1/1/2012"))
Create a filter for EndDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!EndDate.Value,"1/1/2013")),CDate("1/1/2013"))
Ps: In step3 and step4, the date(“1/1/2012”, “1/1/2013”) in the expression are the default we set to make sure the report can successfully process. You can set any date existing in your dataset.
Use the expression below to set the visibility of the tablix:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,false,true)
Create a textbox, put the expression below into it:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,"","Date invalid")
Save and preview. It looks like below:
Reference:
SSRS Calendar and Date Restriction
Errors and Events Reference (Reporting Services)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Web composer option not displaying while Customizing Error Messages of Portal applications

Similar Messages

Maybe you are looking for