Web Conference Connectivity Recipe

New install of OCS V2, Infra & Store on one box, Mid on 2nd box. RHAS2.1. What is the recipe for making Web Conferencing work for a user external to the firewall. Here is my current setup:
Mid tier: 1st IP 192.168.100.212, 2nd IP 192.168.100.210
Web Cache set to listen on only .212.
Firewall: Tunnel for one ext address to .212 internal for port 7777 and 80. Tunnel for same ext address to .210 for 4443 and 443 ports. Corresponding remote access filters for TCP.
Connection to 7777 works fine, loads console, but fails connection to conference. Using New User test fails on connectivity.
What am I missing?
Thanks for any help.
Ray.

 You are a victim of the PC Video Freeze, David.
Some, but not all, iChat AV users experience what we call the "PC Video Freeze" with some, but not all, of their AIM for Windows video chat buddies. This phenomenon is documented in detail in this iChat AV Discussions Thread: iChat MAC to PC Video Freeze after 6.5 min. (As documented in the thread, and as is true in your case, the actual time-to-freeze can differ.)
The "Freeze" is characterized by the video picture from the PC freezing at the Mac end while the audio continues to work uninterrupted. The PC continues to get normal picture and audio from the Mac.
I know of no instance of this problem being reported on a slow (sub-1GHz) processor PC. Other than that, there are few commonalities. If you want to know more, read the thread linked above or search iChat AV Discussions for "PC freeze" (without the quotation marks.)
For those who are victims of the PC Video Freeze, the best suggestion is to resolve any Possible hardware or software conflicts with connected TV/Video/AV devices. Some users report that this solves their problem.
All others must use the only known workaround: Close the video window and open a new one to get a few more video minutes. Repeat as necessary.
If Tony's suggestion for the PC to use Trillian resolves the problem, please let us know. We will all be eager to hear another work-around.
Cheers,
Jim

Similar Messages

  • Cisco WebEx Web Conference Initiation

    Could someone please describe the process by which a web conference is set up on Cisco WebEx?
    How does a user initiate an ad-hoc web conference? How do other users join?
    What processes are taking place in the Cisco WebEx Cloud to set up the meeting? What protocols are used for initiation, control, audio/video, etc?
    Any help would be greatly appreciated!
    Thanks!

    More interested in the SaaS, hosted cloud solution (WebEx Connect).
    Although, would be nice to know if it works the same way with MeetingPlace/WebEx integration.

  • Web conference with AOL

    When I web conference on AOL the conference cuts out after 4:47 every time! Any suggestions as to what might be wrong?

     You are a victim of the PC Video Freeze, David.
    Some, but not all, iChat AV users experience what we call the "PC Video Freeze" with some, but not all, of their AIM for Windows video chat buddies. This phenomenon is documented in detail in this iChat AV Discussions Thread: iChat MAC to PC Video Freeze after 6.5 min. (As documented in the thread, and as is true in your case, the actual time-to-freeze can differ.)
    The "Freeze" is characterized by the video picture from the PC freezing at the Mac end while the audio continues to work uninterrupted. The PC continues to get normal picture and audio from the Mac.
    I know of no instance of this problem being reported on a slow (sub-1GHz) processor PC. Other than that, there are few commonalities. If you want to know more, read the thread linked above or search iChat AV Discussions for "PC freeze" (without the quotation marks.)
    For those who are victims of the PC Video Freeze, the best suggestion is to resolve any Possible hardware or software conflicts with connected TV/Video/AV devices. Some users report that this solves their problem.
    All others must use the only known workaround: Close the video window and open a new one to get a few more video minutes. Repeat as necessary.
    If Tony's suggestion for the PC to use Trillian resolves the problem, please let us know. We will all be eager to hear another work-around.
    Cheers,
    Jim

  • Online Demonstration - Web Conference Application recommendations

    Hi Folks.
    I want to be able to perform an online 'web conference' style demonstration of my APEX application.
    In other words I want to invite a bunch of people to connect to a URL where they can passively watch a demonstration of my application that I will perform.
    I wondered if any of you had any suggestions for an economic way of doing this.
    I was watching Marc Sewtz's APEX 4.0 demo for the German guys earlier today. I guess I'm after something just like the Oracle Web Conference app but, as I only need to do this a couple of times I'm looking for an economic, ad-hoc way of achieving something similar.
    If any of you have any recommendations, please let me have them.
    Many thanks
    Simon

    Simon,
    I use GotoMeeting (http://gotomeeting.com) for online demonstrations and the like. You can get a free 30-day trial so that you can test it out for yourself. After that, it's $50 a month for any number of meetings (limited to 15 participants).
    My advice is that no matter which conference system you choose, use a regular phone line for the audio portion. I have yet to see a successful web-based audio system work for more than 2 minutes...
    Thanks,
    - Scott -

  • "Unable to load URL" - SQL Server 2005 DB Web Service Connection

    Hi ,
    I am using XCelsius version 5.0.0.99 to create dashboards connecting to SQL Server 2005.
    Find below the details of the steps -
    1. Created a web service within SQL Server 2005 database.
    2. Copied the WSDL URL.
    3. In XCelsius 2008 -> Data Manager -> Web Service Connection, pasted the URL in the WSDL URL input box and clicked "Import" to import the methods. At this point I am getting "Unable to load URL" .
    Am I missing any step ?
    Any suggestion would be highly appreciated.
    Note : I have tested the web service by using it in a ASP.Net project and works fine.
    Thanks
    Chitra

    Hi,
    Error :unable to Load URL occurs" because Crystal xcelsius only support single schema web service created from Query as a web service and Flynet tool available in xcelsius 2008.
    The reason:
    All the web service create from Sql 2005 ,PHP script produced multiple scehma web service and crystal xcelsius only support single schema web service which can be created from Query as a web service or Flynet.
    Please revert in case of any queries.
    Regards
    Kekti Fadnavis

  • WEB AS connection failed

    Hi,
    i have logon method in User management as SAPLOGON (since we have same userids in Portal as well as in BW systems) and issued the necessary parameters for WEB AS connection as :
    WAS Description BW Development
    WAS Host Name IP address:8000
    WAS Path /sap/bw/bex
    WAS Protocol http
    Also gave the all necessary values in connector property.
    Now if i go to Display - > Connection Test and select the following :
    SAP Web AS Connection
    Connection Test for Connectors
    it is giving the following result:
    Results
    SAP Web AS Connection - Jan 1, 1970 7:27:40 PM
    Test Details:
    The test consists of the following steps:
    1. Check that the system object defines an SAP system
    2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
    3. Check the HTTP/S connection to the defined backend application
    Results
    1. The system object represents an SAP system.
    2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (ip address:8000)
    3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
    Test Connection with Connector - Jan 1, 1970 7:27:40 PM
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
    Results
    Retrieval of default alias successful
    Connection successful
    Even though we dont want to do user mapping (we have similar userids in both ends as mentioned early), i went ahead and did that also, but still WEB AS is failing with above mentioned error.
    Is there any specific patch level need to be there for BASIS or J2EE etc... we have BW 3.5(web as 640- ABAP System), EP 6.0 Patch 9.
    Thanks

    Hi ,
    I have had this problem before . Even though you still got a failure while the connection test , actually whrn you use the system object it works .Pls chaeck all the your parameter are right before you use this object .
    Thanks
    Aneez

  • Mapping input values for a web service connection to a range of cells

    I've created a web service connection in Xcelsius data manager. My web service requires an array of integer as input parameter. How do I map input values for a web service connection to read from a range of cells in the spreadsheet, e.g. $A$2:$A$20, in similar way of mapping output values to write to a range of cells in the spreadsheet?
    For output values of the web service, I can specify to map the output values to write to a range of cells. However, it doesn't seem to work for reading the input values.
    I can map input values for each node to a single cell, e.g. $A$2, in the spreadsheet. However, when I set the "Read From" field to a range of cells, e.g. $A$2:$A$20, it only reads in the first value in the range.
    Is there any way that we can do this mapping for input values as we do for output values?
    Your assistance is very much appreciated.
    Regards,
    Van

    Van,
    There is a workaround for that...
    Example:
    My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
    Now what i do is
    A1 = 072008
    A2 = 082008
    A3 = CONCATENATE(A1,":",A2)
    so A3 = 072008:082008
    Now i map the input value in web service to cell A3
    P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an  option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
    hope this helps..
    -Anil

  • Difference beetween QAASW and Web Service Connections

    Hi everybody,
    I'm trying to install a connection between Xcelsius and a QaaWS I created, but it doesn't work. In the list of the different connections available in the Xcelsius Connections Manager, the "QaaWS" connections doesn't appear. Instead of that I can choose the "Web Service Connections" type.
    Do you think this little difference can't be the source of my big problem?
    If not, do any of you would like to risk an explanation about this odd pheanomenom (which seems to belongs to the category of the surnatural things thats happens when I even try to undertake a slight complex task in my Business Objects environnment)
    In advance , thanks a lot ( why "in advance"? Because I feel, I'll get an answer, as an old bohemian woman who's suddenly poped in my office today told me one you would light the darkness of my interrogations)
    Bye bye !!

    Hi Meryll,
    As you have already noticed, invoking a QaaWS URL into the standard Web Service Connection will NOT fire, regardless if everything is configured correctly.
    I would assume that this is by design due to the fact that QaaWS Web Services are fetching data out of a BOE server.  As such, anything that has to do with BOE connectivity (LiveOffice, QaaWS, Open/Save/Import/Export to Enterprise) is only available in the Xcelsius 2008 Engage Enterprise edition.
    Thanks.

  • Dynamic columns on output values for a Web Service connection

    Hello,
    I'm trying to create a web service connection that is similar in response to the XML data connection in that i don't want to fix the number of columns per row down in the WSDL. i.e. i want to create an array of columns:
      <xsd:complexType name="XLRowDef">
        <xsd:sequence>
          <xsd:element name="column" curashared:shortname="c" type="xsd:string" minOccurs="0" maxOccurs="unbounded"/>
        </xsd:sequence>
      </xsd:complexType>
    and for the user of the WSDL (the guy who will design the dashboard) to be able to fix and link the number of columns when he designs the dashboard. I was hoping the button would reveal itself in the "output values" box much like it does in the "input values" but no matter how i twist the xsd - no joy. I also tried just linking the column element to multiple excel columns but still fixes to the first column in the range. Can this result be achieved in Xcelsius short of using an XML data connection?
    Regards,
    Gilbert

    Van,
    There is a workaround for that...
    Example:
    My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
    Now what i do is
    A1 = 072008
    A2 = 082008
    A3 = CONCATENATE(A1,":",A2)
    so A3 = 072008:082008
    Now i map the input value in web service to cell A3
    P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an  option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
    hope this helps..
    -Anil

  • Calculations in Xcelsius using data generated by a Web Service Connection

    Hi,
    I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY  2. SUBCATEGORY 3. PRODUCT TYPE   4.#OFCALLS.  There will be anywhere from 1 to 500 rows of data depending on day of week and time of day.  The web service sorts the list by #OFCALLS descending. The OUTPUT VALUES of the web service connection are mapped to cells A19:D518.
    Formulas in the spreadsheet take the Top 10 from the list and populate it to cells  A4:D13.  A formula in cell D15 sums the #OFCALLS for the entire web service connection output (A19:D518).
    The data in A4:D15 is mapped to a spreadsheet table on my canvas.   When the report generates, the data from the TOP 10 of the web service connection populates properly, but the cell that should reflect the TOTAL#OFCALLS (D15) shows zero.
    Is it not possible to do additional calculations in the spreadsheet based on data generated by the web service connection?  A major difference between using an XML Map and a Web Service Connection is the XML Map actually populates the spreadsheet with the new data when it is refreshed.  The Web Service connection data never actually appears in the spreadsheet itself, even though it updates to the appropriate vessel on the canvas.   This makes me think that no additional calculations can be done in the spreadsheet based on the web service connection data.
    Can anyone tell me if that is correct?  If so, then the web service connection would also have to pull in the TOTAL#OFCALLS along with the other data.   This would also seem to greatly limit what you could do with data generated by a web service connection, so I am hoping I am wrong and just don't understand how to do this.
    Can anyone clarify this for me?  If I failed to give any pertinent info let me know what it is, and I will update my post.
    Thanks!

    I have seen similar behavior as well.  I have live data coming into Xcelsius from a data connection. 
    A supported Excel formula
    =IF(ISBLANK(J2),I2,VALUE(TODAY()-J2))
    is then applied to one of the columns to create an additional derived column.
    Taking a snapshot of the data shows that the derived column is being populated, however the controls I've tried hooking up to the derived column (charts and labels) are always empty.
    Information on whether this is supported would be appreciated.
    Thank you,
    David

  • Error with web services connection to B1 DI API

    We are attempting to utilize the web services connection to SAP Business One and are running into difficulty.  Below are the particulars:
    -   We are attempting to make a web services connection to B1 using PHP on Linux.
    -   We are able to establish a session, but not able to make a successful web services request.
    -   The attempted action is to add a Business Partner
    -   Error we are receiving:
    SoapFault exception: Not Found in /var/www/test.php:83 Stack trace: #0 : SoapClient->__doRequest('__call('Add', Array) #2 /var/www/test.php(83): SoapClient->Add(Array) #3
    -         We are also able make a successful web services request to the same B1 server using ASP from Windows.
    -         Once we establish a session through PHP / Linux, the DI Server will not respond to either PHP or ASP on Windows
    Any advice or suggestions would be appreciated.

    Russell,
    Since you are getting a "SoapFault Exception", you must be trying to use SOAP messaging.  The DI API does not understand SOAP messages.  You would need to use the DI Server (SDK Help has information on DI Server) for SOAP based messaging and in turn you may also want to look at the Business One Web Services (B1WS) tool that s located in the Tools section of the SAP Business One main page here on SDN.
    HTH,
    Eddy

  • Slow response when using Xcelsius web service connection witn input values

    We've been very successful in using the Xcelsius Web Service Connection. We've recently moved forward toward using input values when calling a web service and having issues with response time. Without input values, it takes 3 - 6 seconds to retrieve and display the results in Xcelsius, but, when using the input values to the web service, it takes about 27 seconds for Xcelsius to retrieve and display the results.  Does anyone have experience with fixing slow response associated with using input values for a web service connection?

    Hi Sharone,
    What's the version of your Xcelsius and BOBJ server?
    I'm asking because using the last version of BOBJ server (BOXI 3.1 SP 3) you have new services on CMC just to help Xcelsius to work better with WebServices.
    Regards,
    Rodrigo.

  • Web Service Connection in Xcelsius 2008

    I have recently upgraded from 4.5 to Xcelsius 2008 and am having trouble getting the Web Service Connections set up correctly for my QaaWS.
    I have 7 LiveOffice connections in a model that seem to all refresh on load fine and i have already set up a Web Service Connection that picks up the drill through path of what the user has clicked on and used them as input parameters to a QaaWS query.
    I now need to add another Web Service Connection for another QaaWS and i get the following error message;
    "Unable to Load URL"
    I have checked the available QaaWS services using dswsbobje/qaawsservices and the 2 queries appear as i would expect.
    I have checked the dsws.properties file and the user name and password are correct (which i would expect as teh 1st connections works in the Xcelsius model.
    I have restarted the Tomcat server and CMS and this does not cure the problem.
    I have even tried re-installing QaaWS.
    I have installed SP1 fix 1 for 2008. I am currently using XIR2 SP2.
    Can anyone help as sometimes this functionality works and sometimes it does not. The 2 queries i want to use point aty teh ssame database and BO Universe.
    Edited by: Anthony Jones on Jan 8, 2009 12:18 PM

    Hi Anthony,
    You might check that type of the licence type of the user QaaWSPrincipal. I had a problem where the QaaWSPrincipal user was Concurrent Access License while my server was Named User only. Switching to Named User resolved the problem.
    However, I am not sure that this is your issue as the you have one QaaWAS url working. YOu might want to check your URL is available
    try
    http://<name of server>:<Tomcat port number>/dswsbobje/qaawsservices
    This contains a list of all URLs. Finally, you might look at importing the wsdl into other applications to see if the issue is Xcelsius or QaaWS related. You can copy to MS Office InfoPath with steps described below.
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_query_as_a_web_service_en.pdf
    Hope this helps
    Alan

  • Web Service Connection on fresh SUM formula is zero

    I am using Xcelsius SP1.  I have a field in the spreadsheet that has the formula "=SUM(H12:H16)".  I am using a Web Service Connection to refresh the data.  Following a refresh from the web service connection the field with the SUM formula is 0.  I have discovered that ff the values in SUM range (in my case H12:H16) are identical to the refrehsed data then the formulas results willl be 0.  If one of the sum values is different from the original values then the sum formula works.  Is this a bug? Is there a work around?

    I had a problem with the data format after getting number-values from my web-service, because every number-value I got was not a number - it was a string.
    so I had to convert all the data in Excel from string to number values. after that everything works fine for me.
    you could try that out....

  • Web Service Connection Date Input Values Converted to Number

    I am using a Web Service Connection that has an input value called 'ModifiedOn' that is a date type.  The problem that I have is that instead of sending a date string like '2008-08-04' it sends a number '39665' as the input to the web service method instead.  Is there a way to force a date string to be returned instead of the number?
    Here is the XML that is being sent to the web service method from Xcelsius:
    <?xml version="1.0" encoding="UTF-8"?>
    <soap:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:n0="http://tempuri.org/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <soap:Header />
       <soap:Body>
          <n0:SaveScenerio>
             <n0:dash>
                <n0:Scenerio CreatedBy="1" MedianIncome="54000" ModifiedBy="-1" Deleted="false" Population="56001" Title="Scenerio 5" ModelId="14" Year="2008" Description="" ScenerioId="5" SystemName="Scenerio 5" CreatedOn="39665" ModifiedOn="39665">
                   <n0:Model ModuleId="" Description="" ModifiedBy="-1" Deleted="false" CreatedBy="1" CreatedOn="39665" Title="My First Model EDITED 2" ModifiedOn="39665" ModelId="14">
                   </n0:Model>
                   <n0:RateRevenueResidential RateRevenueTypeId="" CreatedBy="1" NumOfCustomers="34000" NumNewCustomers="12000" RateRevenueId="" Deleted="false" MonthlyAvgUsage="10000" HookupCharge="74" VolumeCharge="0" VolumeRate="0.36" ScenerioId="" ModifiedBy="-1" CreatedOn="39665" FixedRate="20" ModifiedOn="39665">
                      <n0:RateRevenueType RateRevenueTypeId="" Description="">
                      </n0:RateRevenueType>
                   </n0:RateRevenueResidential>
                   <n0:RateRevenueCommercial RateRevenueTypeId="" CreatedBy="1" NumOfCustomers="150" NumNewCustomers="12002" RateRevenueId="" Deleted="false" MonthlyAvgUsage="20000" HookupCharge="75" VolumeCharge="0" VolumeRate="0.37" ScenerioId="" ModifiedBy="-1" CreatedOn="39665" FixedRate="30" ModifiedOn="39665">
                      <n0:RateRevenueType RateRevenueTypeId="" Description="">
                      </n0:RateRevenueType>
                   </n0:RateRevenueCommercial>
                   <n0:RateRevenueIndustrial RateRevenueTypeId="" CreatedBy="1" NumOfCustomers="34" NumNewCustomers="12003" RateRevenueId="" Deleted="false" MonthlyAvgUsage="30000" HookupCharge="76" VolumeCharge="0" VolumeRate="0.38" ScenerioId="" ModifiedBy="-1" CreatedOn="39665" FixedRate="40" ModifiedOn="39665">
                      <n0:RateRevenueType RateRevenueTypeId="" Description="">
                      </n0:RateRevenueType>
                   </n0:RateRevenueIndustrial>
                   <n0:RateRevenueGovernmental RateRevenueTypeId="" CreatedBy="1" NumOfCustomers="6" NumNewCustomers="12004" RateRevenueId="" Deleted="false" MonthlyAvgUsage="40000" HookupCharge="77" VolumeCharge="0" VolumeRate="0.39" ScenerioId="" ModifiedBy="-1" CreatedOn="39665" FixedRate="50" ModifiedOn="39665">
                      <n0:RateRevenueType RateRevenueTypeId="" Description="">
                      </n0:RateRevenueType>
                   </n0:RateRevenueGovernmental>
                   <n0:RateRevenueOther RateRevenueTypeId="" CreatedBy="1" NumOfCustomers="10" NumNewCustomers="12005" RateRevenueId="" Deleted="false" MonthlyAvgUsage="50000" HookupCharge="78" VolumeCharge="0" VolumeRate="0.4" ScenerioId="" ModifiedBy="-1" CreatedOn="39665" FixedRate="60" ModifiedOn="39665">
                      <n0:RateRevenueType RateRevenueTypeId="" Description="">
                      </n0:RateRevenueType>
                   </n0:RateRevenueOther>
                </n0:Scenerio>
                <n0:ErrorMessage>
                </n0:ErrorMessage>
                <n0:Forecast EstSystemCapacityYear4="" Industrial="0" Other="0" RateRevenue="0" EstSystemCapacityYear5="" HookupRevenue="0" CreatedBy="1" OtherRevenue="0" ModifiedBy="-1" CapitalFunds="0" ModifiedOn="39665" OperationsNMaintenanceExpenses="0" GeneralNAdminExpenses="0" OtherExpenses="0" Governmental="0" Deleted="false" ResidentialRates="0" CapitalImprvFundsYear2="0" CapitalImprvFundsYear3="0" CapitalImprvFundsYear4="0" CapitalImprvFundsYear5="0" CapitalExpYear2="0" CapitalExpYear3="0" CapitalExpYear4="0" CustResidential="0" CapitalExpYear5="0" Year="2008" EstSystemCapacityYear1="" Commercial="0" EstSystemCapacityYear2="" CreatedOn="39665" ScenerioId="" EstSystemCapacityYear3="" Mhi="0">
                </n0:Forecast>
                <n0:Revenue CapitalDWSRF="5600" AnnualHookup="4561076" CapitalGovLoan="5600.01" CapitalBusinessLoan="5600.02" CreatedBy="1" CapitalGrant="5601.03" AnnualOperationg="14292490.399999999" ModifiedBy="-1" Deleted="false" OtherInterestIncome="5600" OtherRevenue="5600" CapitalWithdraw="5602.04" ScenerioId="" CapitalOther="5603.05" OtherFeesNServiceCharges="5600" AnnualRate="9731414.399999999" CreatedOn="39665" AnnualOther="16800" ModifiedOn="39665">
                </n0:Revenue>
                <n0:Expense OpsMartriesNSupplies="1000000" CapitalNonFacility="1000000" AdminEngineering="1000000" ModifiedBy="-1" OpsMonitoring="1000000" Deleted="false" CreatedBy="1" OpsTransportation="1000000" AdminConservation="1000000" ModifiedOn="39665" CapitalDebtService="1000000" OpsMisc="1000000" AdminMisc="1000000" OpsUnaccountedWater="1000000" OtherDepreciation="1000000" OpsSalariesNBenefits="1000000" AdminSalareisNBenefits="1000000" OtherDeductionsFeesExp="1000000" OpsPowerNUtility="1000000" AdminOfficeSupplies="1000000" CapitalNewFacilities="1000000" AdminInsurance="1000000" ScenerioId="" OpsChemicalNTreatment="1000000" CapitalOther="1000000" AdminLegalNAccounting="1000000" CreatedOn="39665" CapitalReplacement="1000000" CapitalLeakageRepair="1000000">
                </n0:Expense>
             </n0:dash>
          </n0:SaveScenerio>
       </soap:Body>
    </soap:Envelope>
    Edited by: Aaron Jackson on Aug 7, 2008 10:44 PM

    Hi Aaron,
    You may want to try formatting the cell of "ModifiedOn" to a TEXT format instead of date to get yyyy/mm/dd formatting to appear. 
    It seems that Xcelsius automatically converts any type of date-specific formatting (as specified from Excel) to a date serial, which is what you are seeing here.
    Hope that works.

Maybe you are looking for